Topic: 1080Ti Specific - Best mining option - page 127. (Read 409677 times)
Could someone please share link fro djm ccminer for zcoin. Im having problems with effective hashrate in miningpoolhub, showing constantly 40% less than my ccminer shows for period of more than a day...
Installed a aorus extreme today in the system. There is an FE in there with it.
As predictable the FE is now running hotter than it was due to now being somewhat suffocated. What I can't figure out yet is why the FE will run 70% TDP, +250/-400 and it works. I put those same settings on the aorus extreme and it blows up and crashes.
You would think the extreme would run better than the FE not the other way around. Aorus has way better cooling and is running 12c cooler than the FE. Yet it seems more finicky.
Maybe some trick to it I haven't figured out yet.
As predictable the FE is now running hotter than it was due to now being somewhat suffocated. What I can't figure out yet is why the FE will run 70% TDP, +250/-400 and it works. I put those same settings on the aorus extreme and it blows up and crashes.
You would think the extreme would run better than the FE not the other way around. Aorus has way better cooling and is running 12c cooler than the FE. Yet it seems more finicky.
Maybe some trick to it I haven't figured out yet.
I have an EVGA FE GTX 1080 Ti and a Gigabyte Windstream GTX 1080 Ti (the cooler with 3 fans) in my personal gaming system. As far as mining goes, the FE version will do +225-250 depending on algo, while the aftermarket GPU will only do +125 without crashing. Silicone lottery as they say....
You guys crack me up
Every card has different base/boost clocks etc. from the manufacturer.
An FE card will take higher overclocks in afterburner because it's starting out at a much lower base.
And it doesn't have worse cooling, it has different cooling that is designed to move air through the case and expel it outside.
Feed it cool air and it will run cool, or feed it hot air from the auros and it will run hot
Set both cards to the defaults and then check the actual frequency of the core/mem when you are mining and you will see
Installed a aorus extreme today in the system. There is an FE in there with it.
As predictable the FE is now running hotter than it was due to now being somewhat suffocated. What I can't figure out yet is why the FE will run 70% TDP, +250/-400 and it works. I put those same settings on the aorus extreme and it blows up and crashes.
You would think the extreme would run better than the FE not the other way around. Aorus has way better cooling and is running 12c cooler than the FE. Yet it seems more finicky.
Maybe some trick to it I haven't figured out yet.
As predictable the FE is now running hotter than it was due to now being somewhat suffocated. What I can't figure out yet is why the FE will run 70% TDP, +250/-400 and it works. I put those same settings on the aorus extreme and it blows up and crashes.
You would think the extreme would run better than the FE not the other way around. Aorus has way better cooling and is running 12c cooler than the FE. Yet it seems more finicky.
Maybe some trick to it I haven't figured out yet.
I have an EVGA FE GTX 1080 Ti and a Gigabyte Windstream GTX 1080 Ti (the cooler with 3 fans) in my personal gaming system. As far as mining goes, the FE version will do +225-250 depending on algo, while the aftermarket GPU will only do +125 without crashing. Silicone lottery as they say....
Installed a aorus extreme today in the system. There is an FE in there with it.
As predictable the FE is now running hotter than it was due to now being somewhat suffocated. What I can't figure out yet is why the FE will run 70% TDP, +250/-400 and it works. I put those same settings on the aorus extreme and it blows up and crashes.
You would think the extreme would run better than the FE not the other way around. Aorus has way better cooling and is running 12c cooler than the FE. Yet it seems more finicky.
Maybe some trick to it I haven't figured out yet.
As predictable the FE is now running hotter than it was due to now being somewhat suffocated. What I can't figure out yet is why the FE will run 70% TDP, +250/-400 and it works. I put those same settings on the aorus extreme and it blows up and crashes.
You would think the extreme would run better than the FE not the other way around. Aorus has way better cooling and is running 12c cooler than the FE. Yet it seems more finicky.
Maybe some trick to it I haven't figured out yet.
All these Nicehash refugees 
you never earned more on nicehash, plain and simple. well, maybe here and there when coins pumped, but HOW do you think you guys earned that much? haha
from RENTERS.
you all will just have to learn to mine, pick up a damn pickaxe like the forefathers, or sell your shit and let the big boys play
you never earned more on nicehash, plain and simple. well, maybe here and there when coins pumped, but HOW do you think you guys earned that much? haha
from RENTERS.
you all will just have to learn to mine, pick up a damn pickaxe like the forefathers, or sell your shit and let the big boys play
Not at all. I am crying! We lost the most profit
I want over $10 days back...That was almost SCAM. Someone wants us to mine lyra2v2. Don't cry we lost more on Nicehase, rather than one day of mining lyra.
Guys!!!
Do not trust WTM anymore!!!
whattomine is a snapshot of current difficulty and price of the coin - during the day all move up and down, so the results move with them
you should focus long term or keep changing the miner every hour or so
24-48 hours is it the long term enough?
Yesterday WTM showed from 9 to 12$ (and today is 7.4$) for Vertcoin and Mona per 1080ti. I was not able to get close even to the half of this value on different pools with different miners on lyra2v2 (btw, despite of different miners the result near the same +/-5%). My profit was only 1-3$ per card.
IMHO, they shows absolutely wrong profit for some reasons. I only hope they was not hacked or get paid for this shit.
Not at all. I am crying! We lost the most profit
I want over $10 days back... whattomine is a snapshot of current difficulty and price of the coin - during the day all move up and down, so the results move with them
you should focus long term or keep changing the miner every hour or so
24-48 hours is it the long term enough?
Yesterday WTM showed from 9 to 12$ (and today is 7.4$) for Vertcoin and Mona per 1080ti. I was not able to get close even to the half of this value on different pools with different miners on lyra2v2 (btw, despite of different miners the result near the same +/-5%). My profit was only 1-3$ per card.
IMHO, they shows absolutely wrong profit for some reasons. I only hope they was not hacked or get paid for this shit.
whattomine is a snapshot of current difficulty and price of the coin - during the day all move up and down, so the results move with them
you should focus long term or keep changing the miner every hour or so
24-48 hours is it the long term enough?
Yesterday WTM showed from 9 to 12$ (and today is 7.4$) for Vertcoin and Mona per 1080ti. I was not able to get close even to the half of this value on different pools with different miners on lyra2v2 (btw, despite of different miners the result near the same +/-5%). My profit was only 1-3$ per card.
IMHO, they shows absolutely wrong profit for some reasons. I only hope they was not hacked or get paid for this shit.
Core +98, mem +107 on EVGA SC2 1080 TI
72MH on Lyra2v2
72MH on Lyra2v2
whats your power limit? and also what miner?
Power is indeed 100 with ccminer Alexis78
Does anybody receive the same amount as WTM promices? What pool do you use? 
No. Move to Ahashpool or HashRefinery. Use NEMOS miner to see what brings in most cash.
For me it's Skein and Blake2s now.
I'm still getting better profits on Zcoin vs Skein for now
Does anybody receive the same amount as WTM promices? What pool do you use?
No. Move to Ahashpool or HashRefinery. Use NEMOS miner to see what brings in most cash.
For me it's Skein and Blake2s now.
whattomine is a snapshot of current difficulty and price of the coin - during the day all move up and down, so the results move with them
you should focus long term or keep changing the miner every hour or so
I have created Telegram Group for Miners, anyone intersted can join https://t.me/joinchat/HV_-wBLvyrB8BtuX9dSyrg
Does anybody receive the same amount as WTM promices? What pool do you use?
No. Move to Ahashpool or HashRefinery. Use NEMOS miner to see what brings in most cash.
For me it's Skein and Blake2s now.
Hey people,
All pools I found on lyra2v2 shows extremely low real profit on my 1080s compared to wtm. hashrefinery, mph even pool.verters.com. Does anybody receive the same amount as WTM promices? What pool do you use?
All pools I found on lyra2v2 shows extremely low real profit on my 1080s compared to wtm. hashrefinery, mph even pool.verters.com. Does anybody receive the same amount as WTM promices? What pool do you use?
Core +98, mem +107 on EVGA SC2 1080 TI
72MH on Lyra2v2
72MH on Lyra2v2
whats your power limit? and also what miner?
looking at the 245W figure, my guess is 90-100% PL.
I get 60mh/s using 70% PL but I guess it's worth pushing 100% PL with the current profits.
whats your power limit? and also what miner?
looking at the 245W figure, my guess is 90-100% PL.
whats your power limit? and also what miner?
Could anyone mention how to get 1.5+ from gtx 1080 ti on Neoscrypt? I tried a dozen different ccminer versions.
Seems the highest stable I can get is 1440-1481 at 75% TDP.
I get 1600-1650 at 100% TDP, +60 core / 0 mem with Klaus ccminer 8.15 x64
if you will make setting like thos
PL 85, core +50 + 70 , mem +150 +200 ( depends of the card, not all capable to hold +200 memory)
then you will see 1650-1700 -but with much less power consumption, which is kinda nice!
by the way neoscrypt loves memory speed.
You have a different miner than CCminer 8.15? Dont see anyone above 1550 on zpool benches
Edit: nvm intensity needs to be tweaked
Could anyone mention how to get 1.5+ from gtx 1080 ti on Neoscrypt? I tried a dozen different ccminer versions.
Seems the highest stable I can get is 1440-1481 at 75% TDP.
I get 1600-1650 at 100% TDP, +60 core / 0 mem with Klaus ccminer 8.15 x64
if you will make setting like thos
PL 85, core +50 + 70 , mem +150 +200 ( depends of the card, not all capable to hold +200 memory)
then you will see 1650-1700 -but with much less power consumption, which is kinda nice!
by the way neoscrypt loves memory speed.
Jump to: