Pages:
Author

Topic: 7xGPU + Windows // modding AMD video driver is the answer - page 6. (Read 71690 times)

full member
Activity: 224
Merit: 100
CryptoLearner
I have a feeling that if I replug my Win7 SSD and do the same procedure, i'll get the 6 cards running.

Test if you can, please.

Sadly, that wasn't it.

@m1n1ngP4d4w4n

I did yes.

I'me now mining on Windows 10. However, my rig would crash after about 30 minutes. Went to check on it, and it was off which indicated a shutdown had happened. Turns out, I had put 2 sticks of 4GB on that board and a BSOD was happening (Memory_management). Removed the second stick, put the first stick back in slot A1 and it's been mining for 6 hours straight now.

So, it could be that this faulty ram was also causing the Windows 7 problem. I'll test it to see when I have some time on my hands.

I must say, I didn't want to migrate to Win 10 but the fact that it can recognise 6 GPUs natively is pretty nice...

Cool nice you got it to work

Yeah W10 is pretty cool with big rig, make work so much easier  Cool
sr. member
Activity: 487
Merit: 266
I have a feeling that if I replug my Win7 SSD and do the same procedure, i'll get the 6 cards running.

Test if you can, please.

Sadly, that wasn't it.

@m1n1ngP4d4w4n

I did yes.

I'me now mining on Windows 10. However, my rig would crash after about 30 minutes. Went to check on it, and it was off which indicated a shutdown had happened. Turns out, I had put 2 sticks of 4GB on that board and a BSOD was happening (Memory_management). Removed the second stick, put the first stick back in slot A1 and it's been mining for 6 hours straight now.

So, it could be that this faulty ram was also causing the Windows 7 problem. I'll test it to see when I have some time on my hands.

I must say, I didn't want to migrate to Win 10 but the fact that it can recognise 6 GPUs natively is pretty nice...
full member
Activity: 173
Merit: 100
I have a feeling that if I replug my Win7 SSD and do the same procedure, i'll get the 6 cards running.

Test if you can, please.
full member
Activity: 224
Merit: 100
CryptoLearner
Ok so I got all 6 cards running on Windows 10, but initially, I was having the same issue: as soon as the 6th card was plugged in, the one in the slot closest to the CPU would start spinning again after Windows found it, and the computer would hang.

I fixed it by disabling the onboard lan in the BIOS, turning the computer back on, let Windows see and install the drivers for the card and boom, I could log on and all 6 cards were there. I then restarted, re-enabled the onboard lan and I'm now mining with 6 gpus.

I have a feeling that if I replug my Win7 SSD and do the same procedure, i'll get the 6 cards running.

Just wondering, did you disabled the integrated onboard GPU if your motherboard have one ?
sr. member
Activity: 487
Merit: 266
Ok so I got all 6 cards running on Windows 10, but initially, I was having the same issue: as soon as the 6th card was plugged in, the one in the slot closest to the CPU would start spinning again after Windows found it, and the computer would hang.

I fixed it by disabling the onboard lan in the BIOS, turning the computer back on, let Windows see and install the drivers for the card and boom, I could log on and all 6 cards were there. I then restarted, re-enabled the onboard lan and I'm now mining with 6 gpus.

I have a feeling that if I replug my Win7 SSD and do the same procedure, i'll get the 6 cards running.
sr. member
Activity: 487
Merit: 266
Hmmm, I'm having a weird issue.

On an H97 Anniversary, running 5x RX470s on a Windows 7 x64, no issues. I connect the 6th, getting to the Windows loading screen and I here one card after the other spinning it's fan then stopping, I'm counting 6. But soon after, the card in the last PCIe slot starts spinning again and the computer freezes. Removing one of the 6 cards and the computer boots fine.

I'm using driver 16.10.2, tried gen 1 and 2, no difference. Any advice?

does this card work in another slot ? have you tried a different riser ? is another of the working card does the same in that 6th slot ? are you using stock bios ? if you flashed, maybe something went wrong. Have you used the 6x gpu mod before installing the 6th card, because it's needed on w7.

Card is modded, but it's a solid mod so to speak. Different riser, different cable work. However yes, it's always is that last slot that the card has an issue (the bottom one). It'll work fine on 5 cards though.

Yes I did install the mod once the 5 cards are working properly. Kinda out of ideas. I could try a bios update. Tomorrow I'll try a complete driver uninstall and then reinstall cards one at a time, see what's what.

I gave a shot at Windows 10 the other day but ran into a whole bunch of issues...
full member
Activity: 224
Merit: 100
CryptoLearner
Hmmm, I'm having a weird issue.

On an H97 Anniversary, running 5x RX470s on a Windows 7 x64, no issues. I connect the 6th, getting to the Windows loading screen and I here one card after the other spinning it's fan then stopping, I'm counting 6. But soon after, the card in the last PCIe slot starts spinning again and the computer freezes. Removing one of the 6 cards and the computer boots fine.

I'm using driver 16.10.2, tried gen 1 and 2, no difference. Any advice?

does this card work in another slot ? have you tried a different riser ? is another of the working card does the same in that 6th slot ? are you using stock bios ? if you flashed, maybe something went wrong. Have you used the 6x gpu mod before installing the 6th card, because it's needed on w7.
sr. member
Activity: 487
Merit: 266
Hmmm, I'm having a weird issue.

On an H97 Anniversary, running 5x RX470s on a Windows 7 x64, no issues. I connect the 6th, getting to the Windows loading screen and I here one card after the other spinning it's fan then stopping, I'm counting 6. But soon after, the card in the last PCIe slot starts spinning again and the computer freezes. Removing one of the 6 cards and the computer boots fine.

I'm using driver 16.10.2, tried gen 1 and 2, no difference. Any advice?
sr. member
Activity: 487
Merit: 266
@Hadmart, have you tried with 16.10.3?

I've lost about 2 hours trying to get my 470s to work on Win 10. I kept getting freezes and cards weren't recognized properly. I think it also has to do with the fact that I heavily undervolted my cards. They work fine on my Win 7 (classic theme, black background).

I'm running 5 of them on my Win 7 now, haven't tried 6 cards yet. All with driver 16.10.3 (21.19.155.257).
newbie
Activity: 56
Merit: 0
Hi lbr!
My hardware:
6x RX470 8G
Gigabyte z170 gaming k3
8G RAM
G4400 CPU

AMD drivers 16.11.5

In windows 7 x64 two GPUs have code 43 error. After i use your program and patch registry only 5 GPUs work fine and one - code 43 error. In Windows 10 work all 6 GPUs, but win10 unstabe, and telemetry, and updates...
Can you wrote new program, which can run all 6 GPUs on Win7? I'll donate you, if you can.

This program works very well with 6 gpu, win 7 64bit, Crimson 16.10.2 Driver.

With 6 x RX480's? I tried that, no go.
6 x RX470, 16.10.2 driver, win7 x64 works with mod, but with newer drivers only 5 cards (sixth with 43 error code).

NO! 16.10.2 driver don't work!
I tried clean install Win 7x64 with AMD 16.10.2 driver and install mod - only 5 GPU work!
http://i.imgur.com/KML9UEI.png

You need to run the mod with administrator rights.
legendary
Activity: 1191
Merit: 1001
Hi lbr!
My hardware:
6x RX470 8G
Gigabyte z170 gaming k3
8G RAM
G4400 CPU

AMD drivers 16.11.5

In windows 7 x64 two GPUs have code 43 error. After i use your program and patch registry only 5 GPUs work fine and one - code 43 error. In Windows 10 work all 6 GPUs, but win10 unstabe, and telemetry, and updates...
Can you wrote new program, which can run all 6 GPUs on Win7? I'll donate you, if you can.

This program works very well with 6 gpu, win 7 64bit, Crimson 16.10.2 Driver.

With 6 x RX480's? I tried that, no go.
6 x RX470, 16.10.2 driver, win7 x64 works with mod, but with newer drivers only 5 cards (sixth with 43 error code).

NO! 16.10.2 driver don't work!
I tried clean install Win 7x64 with AMD 16.10.2 driver and install mod - only 5 GPU work!
http://i.imgur.com/KML9UEI.png
newbie
Activity: 63
Merit: 0
Hi lbr!
My hardware:
6x RX470 8G
Gigabyte z170 gaming k3
8G RAM
G4400 CPU

AMD drivers 16.11.5

In windows 7 x64 two GPUs have code 43 error. After i use your program and patch registry only 5 GPUs work fine and one - code 43 error. In Windows 10 work all 6 GPUs, but win10 unstabe, and telemetry, and updates...
Can you wrote new program, which can run all 6 GPUs on Win7? I'll donate you, if you can.

This program works very well with 6 gpu, win 7 64bit, Crimson 16.10.2 Driver.

With 6 x RX480's? I tried that, no go.
6 x RX470, 16.10.2 driver, win7 x64 works with mod, but with newer drivers only 5 cards (sixth with 43 error code).

NO! 16.10.2 driver don't work!
I tried clean install Win 7x64 with AMD 16.10.2 driver and install mod - only 5 GPU work!
lbr
sr. member
Activity: 423
Merit: 254
6 x RX470, 16.10.2 driver, win7 x64 works with mod, but with newer drivers only 5 cards (sixth with 43 error code).

Where did you get 16.10.2 driver, from AMD site?
Yes, here is the link -
http://support.amd.com/en-us/download/desktop/previous/detail?os=Windows%207%20-%2064&rev=16.10.2

I've compared inf from this driver to 16.10.1(which I could not make to work with 6x470)

They differ in those three settings under Polaris10(RX 480, RX 470) config
Quote
[ati2mtag_Polaris10_SoftwareDeviceSettings]
HKR,,BDEFF89820EFD7EFFD30, %REG_BINARY%,62,30,06,E1
HKR,,BDEFF99820EFD7EFFD30, %REG_BINARY%,62,30,06,E1
HKR,,BDEFFA9820EFD7EFFD38, %REG_BINARY%,62,36,06,E2

Wtf is this, I've no idea ; )

Next step would be - add those to latest driver, including all changes done by 6xGPU mod and see what happens on 6x470/480 rig.
legendary
Activity: 1191
Merit: 1001
6 x RX470, 16.10.2 driver, win7 x64 works with mod, but with newer drivers only 5 cards (sixth with 43 error code).

Where did you get 16.10.2 driver, from AMD site?
Yes, here is the link -
http://support.amd.com/en-us/download/desktop/previous/detail?os=Windows%207%20-%2064&rev=16.10.2
lbr
sr. member
Activity: 423
Merit: 254
6 x RX470, 16.10.2 driver, win7 x64 works with mod, but with newer drivers only 5 cards (sixth with 43 error code).

Where did you get 16.10.2 driver, from AMD site?
legendary
Activity: 1191
Merit: 1001
Hi lbr!
My hardware:
6x RX470 8G
Gigabyte z170 gaming k3
8G RAM
G4400 CPU

AMD drivers 16.11.5

In windows 7 x64 two GPUs have code 43 error. After i use your program and patch registry only 5 GPUs work fine and one - code 43 error. In Windows 10 work all 6 GPUs, but win10 unstabe, and telemetry, and updates...
Can you wrote new program, which can run all 6 GPUs on Win7? I'll donate you, if you can.

This program works very well with 6 gpu, win 7 64bit, Crimson 16.10.2 Driver.

With 6 x RX480's? I tried that, no go.
6 x RX470, 16.10.2 driver, win7 x64 works with mod, but with newer drivers only 5 cards (sixth with 43 error code).

Did you completely uninstall the old driver?
Yes, with DDU.
sr. member
Activity: 714
Merit: 260
Hi lbr!
My hardware:
6x RX470 8G
Gigabyte z170 gaming k3
8G RAM
G4400 CPU

AMD drivers 16.11.5

In windows 7 x64 two GPUs have code 43 error. After i use your program and patch registry only 5 GPUs work fine and one - code 43 error. In Windows 10 work all 6 GPUs, but win10 unstabe, and telemetry, and updates...
Can you wrote new program, which can run all 6 GPUs on Win7? I'll donate you, if you can.

This program works very well with 6 gpu, win 7 64bit, Crimson 16.10.2 Driver.

With 6 x RX480's? I tried that, no go.
6 x RX470, 16.10.2 driver, win7 x64 works with mod, but with newer drivers only 5 cards (sixth with 43 error code).

Did you completely uninstall the old driver?
legendary
Activity: 1191
Merit: 1001
Hi lbr!
My hardware:
6x RX470 8G
Gigabyte z170 gaming k3
8G RAM
G4400 CPU

AMD drivers 16.11.5

In windows 7 x64 two GPUs have code 43 error. After i use your program and patch registry only 5 GPUs work fine and one - code 43 error. In Windows 10 work all 6 GPUs, but win10 unstabe, and telemetry, and updates...
Can you wrote new program, which can run all 6 GPUs on Win7? I'll donate you, if you can.

This program works very well with 6 gpu, win 7 64bit, Crimson 16.10.2 Driver.

With 6 x RX480's? I tried that, no go.
6 x RX470, 16.10.2 driver, win7 x64 works with mod, but with newer drivers only 5 cards (sixth with 43 error code).
sr. member
Activity: 378
Merit: 250
Hi lbr!
My hardware:
6x RX470 8G
Gigabyte z170 gaming k3
8G RAM
G4400 CPU

AMD drivers 16.11.5

In windows 7 x64 two GPUs have code 43 error. After i use your program and patch registry only 5 GPUs work fine and one - code 43 error. In Windows 10 work all 6 GPUs, but win10 unstabe, and telemetry, and updates...
Can you wrote new program, which can run all 6 GPUs on Win7? I'll donate you, if you can.

This program works very well with 6 gpu, win 7 64bit, Crimson 16.10.2 Driver.

With 6 x RX480's? I tried that, no go.
newbie
Activity: 33
Merit: 0
AsRock H81 Pro BTC
Disable built-in GPU in BIOS, set PCIe to 1.1 if possible, plug GPU directly in the motherboard.

I think it is PICE 1.0.
Pages:
Jump to: