Pages:
Author

Topic: [AC] AsiaCoin | Pure PoS | 100% Interest - page 41. (Read 264526 times)

sr. member
Activity: 532
Merit: 250
hi everybody,
i am pissed because i have sent 118K in Bter like 7 hours ago and nothing !
i had a pending deposit before one hour and now i have nothing no pending deposits no nothing i have written them emails but still nothing  Huh Huh Huh Huh Huh Huh Undecided Undecided Undecided Undecided Lips sealed Lips sealed Lips sealed Cry Cry Cry Lips sealed Lips sealed Lips sealed Angry Angry Angry Angry
Same here but my situation seems to be better than yours. I sent 100k today but the deposit did not take place after the required 200 confirmations. I sent in a support email with my the transaction ID in the end. I was resolved but I think Bter really needs to relook into the 200 confirmations for AsiaCoin. It is quite ridiculous.
sr. member
Activity: 336
Merit: 250
hi everybody,
i am pissed because i have sent 118K in Bter like 7 hours ago and nothing !
i had a pending deposit before one hour and now i have nothing no pending deposits no nothing i have written them emails but still nothing  Huh Huh Huh Huh Huh Huh Undecided Undecided Undecided Undecided Lips sealed Lips sealed Lips sealed Cry Cry Cry Lips sealed Lips sealed Lips sealed Angry Angry Angry Angry
sr. member
Activity: 532
Merit: 250
sr. member
Activity: 269
Merit: 252

It is probably staking all of it. did you have one transfer of your all balance at the same time to your wallet?

NO , I had my balance in several addresses , I had staked successfully before , 2 x , I never moved my coins from those addresses . At some point , we got all stuck at 71999 and no staking nor chain update took place .
I only updated the wallet and as I unlocked it once to see if that was the issue I got 4 new stakes that remain immature , 1 says confirmed 4of4 but immature , and 3 of them unconfirmed 3of4 2of4 1of4 and immature .
I have seen how my AC Balance: moved in some relatively swift steps towards the Stake: . All that time , I did not move my coins around nor anything else , I just waited & held so I could stake again , eventually .
Did you go to Debug > Console to run 'getpeerinfo'? Your connected peers are the ones who are going to get you beyond your current block. Perhaps you should do a backup of your wallet and delete & reinstall your wall app.

I am afraid to delete the wallet , I know for a fact that my coins don't turn up in neither Balance: nor Stake: if I delete my blk0001.dat file ,
even though the chain history rebuilds fully to the actual state in a new blk0001.dat file .
Somehow , all my coins are now showing only under Stake: , both my coins and the unconfirmed stakes ,
and if I delete the two dat files that run the wallet I get a fresh and actual chain but my coins show not up anymore in the wallet .

Yes , I used that command , this is the console's getpeerinfo data output :
Code:
02:53:28

getpeerinfo


02:53:28

[
{
"addr" : "217.30.196.222:35656",
"services" : "00000001",
"lastsend" : 1402793516,
"lastrecv" : 1402793516,
"conntime" : 1402793269,
"version" : 60006,
"subver" : "/AsiaCoin:2.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 81961,
"banscore" : 0
},
{
"addr" : "98.194.23.211:35656",
"services" : "00000001",
"lastsend" : 1402793608,
"lastrecv" : 1402793608,
"conntime" : 1402793272,
"version" : 60006,
"subver" : "/AsiaCoin:2.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 81961,
"banscore" : 0
},
{
"addr" : "188.142.57.104:35656",
"services" : "00000001",
"lastsend" : 1402793608,
"lastrecv" : 1402793608,
"conntime" : 1402793272,
"version" : 60006,
"subver" : "/AsiaCoin:2.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 81961,
"banscore" : 0
},
{
"addr" : "155.210.52.121:35656",
"services" : "00000001",
"lastsend" : 1402793607,
"lastrecv" : 1402793607,
"conntime" : 1402793273,
"version" : 60006,
"subver" : "/AsiaCoin:2.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 81961,
"banscore" : 0
},
{
"addr" : "92.222.19.210:35656",
"services" : "00000001",
"lastsend" : 1402793608,
"lastrecv" : 1402793608,
"conntime" : 1402793274,
"version" : 60006,
"subver" : "/AsiaCoin:2.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 81961,
"banscore" : 0
},
{
"addr" : "209.95.36.152:35656",
"services" : "00000001",
"lastsend" : 1402793283,
"lastrecv" : 1402793308,
"conntime" : 1402793275,
"version" : 60006,
"subver" : "/AsiaCoin:2.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 71999,
"banscore" : 0
},
{
"addr" : "50.47.54.210:35656",
"services" : "00000001",
"lastsend" : 1402793608,
"lastrecv" : 1402793607,
"conntime" : 1402793276,
"version" : 60006,
"subver" : "/AsiaCoin:0.7.2/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 81961,
"banscore" : 0
},
{
"addr" : "79.112.24.77:35656",
"services" : "00000001",
"lastsend" : 1402793421,
"lastrecv" : 1402793513,
"conntime" : 1402793405,
"version" : 60006,
"subver" : "/AsiaCoin:2.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 81963,
"banscore" : 0
},
{
"addr" : "24.18.25.145:35656",
"services" : "00000001",
"lastsend" : 1402793607,
"lastrecv" : 1402793607,
"conntime" : 1402793430,
"version" : 60006,
"subver" : "/AsiaCoin:2.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 81963,
"banscore" : 0
},
{
"addr" : "115.239.43.195:35656",
"services" : "00000001",
"lastsend" : 1402793478,
"lastrecv" : 1402793512,
"conntime" : 1402793476,
"version" : 60006,
"subver" : "/AsiaCoin:2.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 81963,
"banscore" : 0
},
{
"addr" : "70.64.152.152:35656",
"services" : "00000001",
"lastsend" : 1402793532,
"lastrecv" : 1402793535,
"conntime" : 1402793529,
"version" : 60006,
"subver" : "/AsiaCoin:2.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 71999,
"banscore" : 0
},
{
"addr" : "180.229.32.149:35656",
"services" : "00000000",
"lastsend" : 1402793590,
"lastrecv" : 0,
"conntime" : 1402793590,
"version" : 0,
"subver" : "",
"inbound" : false,
"releasetime" : 0,
"startingheight" : -1,
"banscore" : 0
}
]
sr. member
Activity: 532
Merit: 250

It is probably staking all of it. did you have one transfer of your all balance at the same time to your wallet?

NO , I had my balance in several addresses , I had staked successfully before , 2 x , I never moved my coins from those addresses . At some point , we got all stuck at 71999 and no staking nor chain update took place .
I only updated the wallet and as I unlocked it once to see if that was the issue I got 4 new stakes that remain immature , 1 says confirmed 4of4 but immature , and 3 of them unconfirmed 3of4 2of4 1of4 and immature .
I have seen how my AC Balance: moved in some relatively swift steps towards the Stake: . All that time , I did not move my coins around nor anything else , I just waited & held so I could stake again , eventually .
Did you go to Debug > Console to run 'getpeerinfo'? Your connected peers are the ones who are going to get you beyond your current block. Perhaps you should do a backup of your wallet and delete & reinstall your wall app.
sr. member
Activity: 269
Merit: 252

It is probably staking all of it. did you have one transfer of your all balance at the same time to your wallet?

NO , I had my balance in several addresses , I had staked successfully before , 2 x , I never moved my coins from those addresses . At some point , we got all stuck at 71999 and no staking nor chain update took place .
I only updated the wallet and as I unlocked it once to see if that was the issue I got 4 new stakes that remain immature , 1 says confirmed 4of4 but immature , and 3 of them unconfirmed 3of4 2of4 1of4 and immature .
I have seen how my AC Balance: moved in some relatively swift steps towards the Stake: . All that time , I did not move my coins around nor anything else , I just waited & held so I could stake again , eventually .
newbie
Activity: 15
Merit: 0
Resolve Syncing Issues on Mac OS X

1. Close your client.

2. Launch Finder -> Go -> Go to Folder
Code:
~/Library/Application Support/AsiaCoin

3. Download this AsiaCoin.conf and put it in the above folder. Delete peers.dat. Launch Client.

Should your client get stuck, relaunch it.

I did all 3 steps above , placed the config file and deleted peers.dat , relaunched a few times , I am still not moving from block 72003 .
Please note , I have got 4 pending stakes that have not been properly broadcasted to the blockchain ( I checked the ids ) .
Subtracting the 4 unconfirmed blocks from 72003 I am unfortunately still stuck at block 71999 .

• What else could I do to restore a proper functioning ?
• Why is all my AC Balance showing up under Stake: ?
( I have no available balance now , 0.0 AC in my Wallet )

It is probably staking all of it. did you have one transfer of your all balance at the same time to your wallet?
sr. member
Activity: 269
Merit: 252
Resolve Syncing Issues on Mac OS X

1. Close your client.

2. Launch Finder -> Go -> Go to Folder
Code:
~/Library/Application Support/AsiaCoin

3. Download this AsiaCoin.conf and put it in the above folder. Delete peers.dat. Launch Client.

Should your client get stuck, relaunch it.

I did all 3 steps above , placed the config file and deleted peers.dat , relaunched a few times , I am still not moving from block 72003 .
Please note , I have got 4 pending stakes that have not been properly broadcasted to the blockchain ( I checked the ids ) .
Subtracting the 4 unconfirmed blocks from 72003 I am unfortunately still stuck at block 71999 . That is still the real count under info .

• What else could I do to restore a proper functioning ?
• Why is all my AC Balance showing up under Stake: ?
( I have no available balance now , 0.0 AC in my Wallet )
full member
Activity: 214
Merit: 100
never mind i added nodes from http://ac.blockx.info/connected-nodes and working a lot better

Exactly. If you're having issues, please add nodes from that link.

• I still am not getting past block 72003 . I tried many hours and several reboots .
• My entire Available Balance: xxxxx went to show up under Stake: xxxxx
• additional stakes I got are not maturing as my transaction history is not advancing .

How do I identify good nodes and how can I add the nodes to my up-to-date Mac Wallet 2.0.1.0 ?


The version number for good nodes should be: 2.0.0.0 or 2.0.1.0

The height (length of the block chain) reported by the wallet should be greater than 71999

hero member
Activity: 798
Merit: 500
Resolve Syncing Issues on Mac OS X

1. Close your client.

2. Launch Finder -> Go -> Go to Folder
Code:
~/Library/Application Support/AsiaCoin

3. Download this AsiaCoin.conf or create your own with proper nodes and put it in the above folder. Delete peers.dat. Launch Client and let it sync.

Should your client get stuck, relaunch.


sr. member
Activity: 532
Merit: 250
never mind i added nodes from http://ac.blockx.info/connected-nodes and working a lot better

Exactly. If you're having issues, please add nodes from that link.

• I still am not getting past block 72003 . I tried many hours and several reboots .
• My entire Available Balance: xxxxx went to show up under Stake: xxxxx
• additional stakes I got are not maturing as my transaction history is not advancing .

How do I identify good nodes and how can I add the nodes to my up-to-date Mac Wallet 2.0.1.0 ?

Use the nodes from http://ac.blockx.info/connected-nodes. There is a button to generate the nodes so that you can just copy and paste them into your asiacoin.conf file.

You can check by going to the Debug window > Console and run the command 'getpeerinfo'. It will show you the info of the peers u are connected to.
full member
Activity: 210
Merit: 100
never mind i added nodes from http://ac.blockx.info/connected-nodes and working a lot better

Exactly. If you're having issues, please add nodes from that link.

• I still am not getting past block 72003 . I tried many hours and several reboots .
• My entire Available Balance: xxxxx went to show up under Stake: xxxxx
• additional stakes I got are not maturing as my transaction history is not advancing .

How do I identify good nodes and how can I add the nodes to my up-to-date Mac Wallet 2.0.1.0 ?


I asked the person who made the mac wallet (instacash) to come and see if he can figure out what's wrong, clearly there seems to be an issue as a couple of people raised concerns while windows wallets have been working well.

You need to create a .conf file. There are lots of guides online:

https://en.bitcoin.it/wiki/Running_Bitcoin#Bitcoin.conf_Configuration_File

All clients are the same. You can always use Google to learn how to do something with bitcoin clients and it's gonna be the same for any client. Adding nodes to bitcoin/altcoin clients is a very well explained concept everywhere on the net.
sr. member
Activity: 269
Merit: 252
never mind i added nodes from http://ac.blockx.info/connected-nodes and working a lot better

Exactly. If you're having issues, please add nodes from that link.

• I still am not getting past block 72003 . I tried many hours and several reboots .
• My entire Available Balance: xxxxx went to show up under Stake: xxxxx
• additional stakes I got are not maturing as my transaction history is not advancing .

How do I identify good nodes and how can I add the nodes to my up-to-date Mac Wallet 2.0.1.0 ?
full member
Activity: 210
Merit: 100
never mind i added nodes from http://ac.blockx.info/connected-nodes and working a lot better

Exactly. If you're having issues, please add nodes from that link.
full member
Activity: 238
Merit: 100
never mind i added nodes from http://ac.blockx.info/connected-nodes and working a lot better
sr. member
Activity: 532
Merit: 250
Some peers from my peer list who are past 72,000.

121.181.49.117:35656
188.134.4.67:35656
81.152.146.251:35656
31.129.88.12:35656
sr. member
Activity: 532
Merit: 250
The number of users on the old version 0.7.2 and the new 2.0.0.0 is somewhat so par so you need to make sure you are add nodes that are running the latest wallet. If you are connected to mostly old version 2.0.0.0 and 0.7.2 peers, you will not advance. So far, it is somewhat jerky for my Mac wallet. We need all users to update.
full member
Activity: 214
Merit: 100
im using win 7 and i downloaded it from the first page of this thread i always do as instructed i didnt had any problems till now

 If you select: Help > Debug Window on the wallet they give the version number and build date. If it says version number 2.0.1.0 you know for sure you have the latest wallet. If it says version 2.0.0.0 it might still be the latest wallet. When they first released the wallet, they forgot to change the version number reported by the wallet. But you can also check the build date of the wallet. If the build date is very recent, it must be the latest wallet.
sr. member
Activity: 336
Merit: 250
My wallet is upgraded to the last version too, but syncing from 22 hours and still nothing stuck on block 71999 and the green sync line says : -8141 blocks remaining ?

Please somebody help me ! Shocked

Do you have the very latest release? There was a release made maybe 5 days ago. The version number is, I think, 2.0.1.0. With version 2.0.0.0 the loading gets stuck at block 71999; the very latest version corrects this.


I have downloaded the new wallet yesterday from the first page of the thread Sad

Is there a new one ? how can i missed it when its 5 days ago ?
I dont get it honestly
can you post the oficial wallet update link thanx


If it's from page 1 of this thread, it should be the newest version. You can also find the wallet releases on the Asiacoin website, at the bottom of the main page:

http://www.thecoin.asia/

What operating system are you using? The MAC OSX and Linux releases came out later than the Windows release, yesterday I think.

im using win 7 and i downloaded it from the first page of this thread i always do as instructed i didnt had any problems till now
full member
Activity: 214
Merit: 100
My wallet is upgraded to the last version too, but syncing from 22 hours and still nothing stuck on block 71999 and the green sync line says : -8141 blocks remaining ?

Please somebody help me ! Shocked

Do you have the very latest release? There was a release made maybe 5 days ago. The version number is, I think, 2.0.1.0. With version 2.0.0.0 the loading gets stuck at block 71999; the very latest version corrects this.


I have downloaded the new wallet yesterday from the first page of the thread Sad

Is there a new one ? how can i missed it when its 5 days ago ?
I dont get it honestly
can you post the oficial wallet update link thanx


If it's from page 1 of this thread, it should be the newest version. You can also find the wallet releases on the Asiacoin website, at the bottom of the main page:

http://www.thecoin.asia/

What operating system are you using? The MAC OSX and Linux releases came out later than the Windows release, yesterday I think.
Pages:
Jump to: