Topic: [ANN] ccminer 2.3 - opensource - GPL (tpruvot) - page 121. (Read 500113 times)
does anyone have a card dropping to 0 mh? I have a reference evga 1070 that drops to 0 mh periodically. windows 8.1
Interesting , which clock did you reach such speed on 
2126mhz. Then the card (with 170watt tdp in bios) even with +114% in afterburner is power limited to go higher. And I am afraid to flash unlimited bios ... the card is with 8pin only, on warranty and rather expensive. 
Cannot go above 300mhs, any help appreciated.
https://drive.google.com/open?id=0B4flkNGCHIGFWFRBbnZWSTJlaUE
https://drive.google.com/open?id=0B4flkNGCHIGFWFRBbnZWSTJlaUE
..Interesting , which clock did you reach such speed on
btw lyra2v2 is not on par with r10 version of nanashi, one is 40MH the other 35MH, your version
are you joking ? :p
Cannot go above 300mhs, any help appreciated.
https://drive.google.com/open?id=0B4flkNGCHIGFWFRBbnZWSTJlaUE
https://drive.google.com/open?id=0B4flkNGCHIGFWFRBbnZWSTJlaUE
1.8.1 gave @ 10% increase in lbry on a K5000. 
Edit:
And I see now I am sending watts in my stats.
Could it be 32-bit vs. 64-bit?
Or just a hidden gem in the update?
Edit:
And I see now I am sending watts in my stats.
Could it be 32-bit vs. 64-bit?
Or just a hidden gem in the update?
d=256 with yiimp? This is your settings?
Fantastic job, Tanguy! Some donations will definitely come from me as soon as I have some spare btc.
Any idea how to force my 1070 to reach its highest power state for lbry? Can't force my card to get more than 1620 coreclock even with itensity of 23.
cmd as admin, cd C:\Program Files\NVIDIA Corporation\NVSMI\--->nvidia-smi -ac 4004,1999
Any idea how to force my 1070 to reach its highest power state for lbry? Can't force my card to get more than 1620 coreclock even with itensity of 23.
was not exactly useless, shared mem is like a "Café Gourmant", its often better but cost a lot ^^ and you can only eat it if you have enough space in your stomac
Interesting parallel, but IRRC, in the sha256 case shared mem was used to store constants which could easily fit directly into the code.
same around 4-5% iincrease, i wonder if x64 can not be build with cuda 8?
try the newer release (1.8.1)
5% increase on GTX1070 for LBRY algo. Thnx mate.
was not exactly useless, shared mem is like a "Café Gourmant", its often better but cost a lot ^^ and you can only eat it if you have enough space in your stomac
Thanks tpruvot for the new release! :-)
The shared mem of sha256 was, in fact, useless ;-)
The shared mem of sha256 was, in fact, useless ;-)
try the newer release (1.8.1)
hard to know, but look like other miners (including me) doesn't have this problem
GPU #0: scanhash_lbry:133 misaligned address
Cuda error in func 'scanhash_lbry' at line 115 : misaligned address.
GPU #0: scanhash_lbry:136 misaligned address
...
MSi 1070, no OC, dr368.81, w7 64 .. was working fine until these lines appeared.
what´s wrong now??
Cuda error in func 'scanhash_lbry' at line 115 : misaligned address.
GPU #0: scanhash_lbry:136 misaligned address
...
MSi 1070, no OC, dr368.81, w7 64 .. was working fine until these lines appeared.
what´s wrong now??
What is the command to send the help file to my printer plz. thx
And or make a notepad file that can be saved and read or printed.
ccminer1.8.exe --help
pause:
And or make a notepad file that can be saved and read or printed.
ccminer1.8.exe --help
pause:
ccminer1.8.exe --help > ready_to_print.txt
))
Jump to: