I guess without a relaunch we will run into instamine / unfair / broken launch FUD later.
Topic: [ANN] Expanse (EXP) - 1st Stable fork of Ethereum (New Algo + PirlGuard) - page 327. (Read 961474 times)
September 14, 2015, 07:24:05 AM
September 14, 2015, 06:55:24 AM
All seven of my nodes appear to be on the main chain.
2 of which are on windows with 10+ peers.
ocminer what's your node ill add it to the bootnodes so that people are always trying your connection.
Furthermore, https://github.com/ethereum/go-ethereum/issues/1579
Its not just an expanse problem.
2 of which are on windows with 10+ peers.
ocminer what's your node ill add it to the bootnodes so that people are always trying your connection.
Furthermore, https://github.com/ethereum/go-ethereum/issues/1579
Its not just an expanse problem.
Personally, when I mined ETH or SHF, I got 10+ nodes on my Win 10 machine that's on a wireless bridge that can only do IPv4 (a common issue with wireless bridges). I originally, didn't need to open no ports on ETH or SHF to get those 10+ peer connections. I've tried turning off the firewall, port forwarding ( but found that the feature is buggy on my EA6300 router and Linksys doesn't make a firmware fix for it), made rule exceptions on the firewall in windows, add those node from the OP and what ever else I can think off, but only can get connected to 4 peers. At least, it seems I'm still on the right fork, even with the low peer count. Maybe altcoinex is right, that it might be because the wallet that is used is from the stable version and not the cutting edge version with a lot of fixes.
Yea that's very possible. I'm going to put up a handful of interlinked nodes on droplets and add them to the bootnodes also. Hopefully that will help.
September 14, 2015, 06:53:13 AM
i created an account, a nodekey file as its content "cd851103f653eef..", does it mean that my wallet address is "0xcd851103f653eef.."?
In the console, you can type: exp.accounts , to see your account coinbase.
thanks you! i got it now.
Your very welcomed...
September 14, 2015, 06:50:44 AM
All seven of my nodes appear to be on the main chain.
2 of which are on windows with 10+ peers.
ocminer what's your node ill add it to the bootnodes so that people are always trying your connection.
Furthermore, https://github.com/ethereum/go-ethereum/issues/1579
Its not just an expanse problem.
2 of which are on windows with 10+ peers.
ocminer what's your node ill add it to the bootnodes so that people are always trying your connection.
Furthermore, https://github.com/ethereum/go-ethereum/issues/1579
Its not just an expanse problem.
Personally, when I mined ETH or SHF, I got 10+ nodes on my Win 10 machine that's on a wireless bridge that can only do IPv4 (a common issue with wireless bridges). I originally, didn't need to open no ports on ETH or SHF to get those 10+ peer connections. I've tried turning off the firewall, port forwarding ( but found that the feature is buggy on my EA6300 router and Linksys doesn't make a firmware fix for it), made rule exceptions on the firewall in windows, add those node from the OP and what ever else I can think off, but only can get connected to 4 peers. At least, it seems I'm still on the right fork, even with the low peer count. Maybe altcoinex is right, that it might be because the wallet that is used is from the stable version and not the cutting edge version with a lot of fixes.
September 14, 2015, 06:46:12 AM
@ocminer : Can you post your node here? Right now I only have 1 connection. Thanks!
Looks strange, maybe it works:
enode://5ad2a7493a6be9daa417668c074398554884ed42950a35a361d3869367b9da16b093b41b6e9c7ca9835cb96af4f142428204ba527acf1eccf8c0dabc989d376b@[::]:42000
Node
September 14, 2015, 06:43:54 AM
i created an account, a nodekey file as its content "cd851103f653eef..", does it mean that my wallet address is "0xcd851103f653eef.."?
In the console, you can type: exp.accounts , to see your account coinbase.
thanks you! i got it now.
September 14, 2015, 06:41:03 AM
All seven of my nodes appear to be on the main chain.
2 of which are on windows with 10+ peers.
ocminer what's your node ill add it to the bootnodes so that people are always trying your connection.
Furthermore, https://github.com/ethereum/go-ethereum/issues/1579
Its not just an expanse problem.
2 of which are on windows with 10+ peers.
ocminer what's your node ill add it to the bootnodes so that people are always trying your connection.
Furthermore, https://github.com/ethereum/go-ethereum/issues/1579
Its not just an expanse problem.
September 14, 2015, 06:40:35 AM
i created an account, a nodekey file as its content "cd851103f653eef..", does it mean that my wallet address is "0xcd851103f653eef.."?
In the console, you can type: exp.accounts , to see your account coinbase.
September 14, 2015, 06:39:10 AM
i created an account, a nodekey file as its content "cd851103f653eef..", does it mean that my wallet address is "0xcd851103f653eef.."?
September 14, 2015, 06:38:45 AM
@ocminer : Can you post your node here? Right now I only have 1 connection. Thanks!
Looks strange, maybe it works:
enode://5ad2a7493a6be9daa417668c074398554884ed42950a35a361d3869367b9da16b093b41b6e9c7ca9835cb96af4f142428204ba527acf1eccf8c0dabc989d376b@[::]:42000
Added this but still cannot connect, now I have 2 connected but no suprnova node.
September 14, 2015, 06:34:29 AM
Even after adding all the nodes I still get "admin.peers" = null
This coin is still in pre pre pre alpha stage, so, it is normal 
I had over 20 nodes, woke up this morning and - nullEdit: We need pools ASAP, so those problems with loosing all the nodes will not happen
Thewre was testing done for what, 3 or 4 days?
With the issues that was present then and still at the end of test net period then the coin should have been delayed on launch.
You had several weeks to set-up and test mining on ETH.
In fact clone coins are more easy ..see the .bat files
I've been mining Eth for the last few weeks. There was NO issue with connections. Not even Shift.
I am not the only one on Windows who has connection issues. It has been stated many times.
This is all too common in the crypto world. People that have things running smoothly, just assume that people are stupid that have issues and what not, that's the blunt truth, sad to say. Instead of helping and being community oriented in solving issues, some people don't have a humanitarian side to them.
September 14, 2015, 06:31:27 AM
Even after adding all the nodes I still get "admin.peers" = null
This coin is still in pre pre pre alpha stage, so, it is normal I had over 20 nodes, woke up this morning and - nullEdit: We need pools ASAP, so those problems with loosing all the nodes will not happen
Thewre was testing done for what, 3 or 4 days?
With the issues that was present then and still at the end of test net period then the coin should have been delayed on launch.
You had several weeks to set-up and test mining on ETH.
In fact clone coins are more easy ..see the .bat files
I've been mining Eth for the last few weeks. There was NO issue with connections. Not even Shift.
I am not the only one on Windows who has connection issues. It has been stated many times.
September 14, 2015, 06:29:01 AM
Even after adding all the nodes I still get "admin.peers" = null
This coin is still in pre pre pre alpha stage, so, it is normal I had over 20 nodes, woke up this morning and - nullEdit: We need pools ASAP, so those problems with loosing all the nodes will not happen
Thewre was testing done for what, 3 or 4 days?
With the issues that was present then and still at the end of test net period then the coin should have been delayed on launch.
You had several weeks to set-up and test mining on ETH.
In fact clone coins are more easy ..see the .bat files
September 14, 2015, 06:28:19 AM
Even after adding all the nodes I still get "admin.peers" = null
This coin is still in pre pre pre alpha stage, so, it is normal I had over 20 nodes, woke up this morning and - nullEdit: We need pools ASAP, so those problems with loosing all the nodes will not happen
Thewre was testing done for what, 3 or 4 days?
With the issues that was present then and still at the end of test net period then the coin should have been delayed on launch.
I'm neither for or against a relaunch. If the relaunch isn't possible, maybe a fork and reset the diff.
Truly, can't say the launch is completely fair if a good number of people had issues that weren't related to their setups and hardware.
I guess ETH was resourceful at doing an semi live network with the olympic period of mining, maybe EXP should have been done like that after the testnet to get the kinks out.
All coins have some sort of hitch during launch, that's the reality and there will never be a fair/perfect launch.
September 14, 2015, 06:22:02 AM
Even after adding all the nodes I still get "admin.peers" = null
This coin is still in pre pre pre alpha stage, so, it is normal I had over 20 nodes, woke up this morning and - nullEdit: We need pools ASAP, so those problems with loosing all the nodes will not happen
Thewre was testing done for what, 3 or 4 days?
With the issues that was present then and still at the end of test net period then the coin should have been delayed on launch.
September 14, 2015, 06:14:53 AM
Any plans to create a GUI wallet? Etherwall could be ported to work: http://etherwall.com/ .
Any progress on a real-time block explorer?
Any progress on a real-time block explorer?
We have a nice GUI wallet that will be out in a day or so. Block Explorer coming soon but no exact time. I believe we also determined the bug that is causing some people to only connect to 2-3 nodes. It seems this bug present in the stable releases of ethereum but not the cutting edge release. Those having trouble please use the pool provided by OC Miner until we release an update late today. Thanks
I thought the problem was the digitalocean droplets ... because you deplyed first nodes on it but without the ipv6 option.
September 14, 2015, 06:11:29 AM
Guys I have problems with the peers too, please make absolutely sure the pool is on the right chain if you throw a lot of hash on it - unfortunately I cannot watch the pool all the time, but I'll try to keep an eye on it as I can.
Please understand that - with all those problems - ITS A high risk GAMBLE and I cannot be held responsible for coins lost on a fork - this is unlikely for me - but I usually never have concerns when I launch a pool.
I know there is no official block explorer yet, so its probably best to either solo mine or compare your block height with the pools block height.
Please understand that - with all those problems - ITS A high risk GAMBLE and I cannot be held responsible for coins lost on a fork - this is unlikely for me - but I usually never have concerns when I launch a pool.
I know there is no official block explorer yet, so its probably best to either solo mine or compare your block height with the pools block height.
So far my block height in solo mining is matching your pool's block height...
September 14, 2015, 06:02:16 AM
Guys I have problems with the peers too, please make absolutely sure the pool is on the right chain if you throw a lot of hash on it - unfortunately I cannot watch the pool all the time, but I'll try to keep an eye on it as I can.
Please understand that - with all those problems - ITS A high risk GAMBLE and I cannot be held responsible for coins lost on a fork - this is unlikely for me - but I usually never have concerns when I launch a pool.
I know there is no official block explorer yet, so its probably best to either solo mine or compare your block height with the pools block height.
Please understand that - with all those problems - ITS A high risk GAMBLE and I cannot be held responsible for coins lost on a fork - this is unlikely for me - but I usually never have concerns when I launch a pool.
I know there is no official block explorer yet, so its probably best to either solo mine or compare your block height with the pools block height.
September 14, 2015, 05:55:33 AM
Any plans to create a GUI wallet? Etherwall could be ported to work: http://etherwall.com/ .
Any progress on a real-time block explorer?
Any progress on a real-time block explorer?
We have a nice GUI wallet that will be out in a day or so. Block Explorer coming soon but no exact time. I believe we also determined the bug that is causing some people to only connect to 2-3 nodes. It seems this bug present in the stable releases of ethereum but not the cutting edge release. Those having trouble please use the pool provided by OC Miner until we release an update late today. Thanks
I was connecting back and forth between 3 to 4 peers, but now stable at 4 peers and seem to be on the right chain.
September 14, 2015, 05:47:52 AM
Any plans to create a GUI wallet? Etherwall could be ported to work: http://etherwall.com/ .
Any progress on a real-time block explorer?
Any progress on a real-time block explorer?
We have a nice GUI wallet that will be out in a day or so. Block Explorer coming soon but no exact time. I believe we also determined the bug that is causing some people to only connect to 2-3 nodes. It seems this bug present in the stable releases of ethereum but not the cutting edge release. Those having trouble please use the pool provided by OC Miner until we release an update late today. Thanks
Jump to: