Looks like the pool is down tonight...
Lots of intermittency with the pool this morning (no work available, stratum share submission failures...). I don't think it's my connection, when I switch to other pools I don't see the same problem. 
Topic: [ANN] Maieuticoin | 2014% PoS | 10k/MMXIV and BALLS/MMXIV Markets NOW OPEN - page 127. (Read 283202 times)
August 06, 2014, 09:48:44 AM
August 06, 2014, 07:37:03 AM
Updated client is available. Not a mandatory upgrade. This version adds wallet unlocking to the menu so you don't have to use the debug window
https://drive.google.com/file/d/0B9KhUdXDh1RqbTBiR3lxMkd4N1E
Is this your coin? Than how the heck do I get my old coins into new coins?https://drive.google.com/file/d/0B9KhUdXDh1RqbTBiR3lxMkd4N1E
Or how about this.
Who wants to buy .3 mmxiv so I can walk away from this coin.
you send btc I'll email you the wallet
August 06, 2014, 12:12:01 AM
Looks like the pool is down tonight...
August 05, 2014, 11:15:09 PM
Updated client is available. Not a mandatory upgrade. This version adds wallet unlocking to the menu so you don't have to use the debug window
https://drive.google.com/file/d/0B9KhUdXDh1RqbTBiR3lxMkd4N1E
https://drive.google.com/file/d/0B9KhUdXDh1RqbTBiR3lxMkd4N1E
Can you also put the wallet that is not in a setup file? Thanks.
August 05, 2014, 11:08:28 PM
Updated client is available. Not a mandatory upgrade. This version adds wallet unlocking to the menu so you don't have to use the debug window
https://drive.google.com/file/d/0B9KhUdXDh1RqbTBiR3lxMkd4N1E
https://drive.google.com/file/d/0B9KhUdXDh1RqbTBiR3lxMkd4N1E
August 05, 2014, 06:32:54 PM
Staking doesn't start untill block 10,000. We're only at 3755.
WTF? What is happening now then, POW with zero reward?
I'm not sure why you think PoW has to end before PoS will start...nobody said that
I merely observed that staking won't start for about 3 months at the current rate.
I'm not sure why you think I said PoW had to end. Nobody said that.
Just to be clear...you can stake anytime. The 10,000 PoW blocks are just to keep the network moving faster while people wait for their coins to mature. After block 10k, it will be purely PoS
August 05, 2014, 06:30:06 PM
Staking doesn't start untill block 10,000. We're only at 3755.
WTF? What is happening now then, POW with zero reward?
I'm not sure why you think PoW has to end before PoS will start...nobody said that
I merely observed that staking won't start for about 3 months at the current rate.
I'm not sure why you think I said PoW had to end. Nobody said that.
August 05, 2014, 06:18:24 PM
COPY wallet.dat into new wallet
That will definitely not work. Don't download that link
Only download using the links in the OP
August 05, 2014, 06:06:17 PM
Staking doesn't start untill block 10,000. We're only at 3755.
WTF? What is happening now then, POW with zero reward?
I'm not sure why you think PoW has to end before PoS will start...nobody said that
August 05, 2014, 05:57:10 PM
Staking doesn't start untill block 10,000. We're only at 3755.
WTF? What is happening now then, POW with zero reward?
August 05, 2014, 01:21:34 PM
COPY wallet.dat into new wallet
That will definitely not work. Don't download that link
Only download using the links in the OP
August 05, 2014, 12:56:19 PM
Is anyone else having a problem with their Antminer S3 configuration with the new wallet addresses?
I have MMXIV as a backup pool in my configuration. When I switched the username to the wallet address starting with 'M' the S3 wouldn't ever start hashing. As soon as I removed the MMXIV pool or replaced it, it works fine. This is on 2 separate units. I know the S3 uses CGMiner. Is there something about a username being a wallet address starting with M that would cause problems like that?
Nevermind. I must have had an extra space at the end of my username or something when I cut and pasted. Works fine..I have MMXIV as a backup pool in my configuration. When I switched the username to the wallet address starting with 'M' the S3 wouldn't ever start hashing. As soon as I removed the MMXIV pool or replaced it, it works fine. This is on 2 separate units. I know the S3 uses CGMiner. Is there something about a username being a wallet address starting with M that would cause problems like that?
BTW, why isn't any of the coin switchover or PoS mentioned in the "events in 2014 list?" The list ends when the coin launched.
August 05, 2014, 10:09:38 AM
The old wallet isn't compatible with the new V2?
How do I get my coins recognized in V2?
How do I get my coins recognized in V2?
August 05, 2014, 09:44:53 AM
PoW Reward is currently 0 until block 10,000, at which point the network will go completely to Proof of Stake
You can start staking now
⬆⬆⬆⬆
OK, I get it - but assumed there was still POS during the POW period ("you can start staking now"). Guess I'll just wait.
August 05, 2014, 09:34:19 AM
PoW Reward is currently 0 until block 10,000, at which point the network will go completely to Proof of Stake
You can start staking now
⬆⬆⬆⬆
August 05, 2014, 09:14:59 AM
Staking doesn't start untill block 10,000. We're only at 3755.
WTF? What is happening now then, POW with zero reward?
August 05, 2014, 09:11:03 AM
Staking doesn't start untill block 10,000. We're only at 3755.
August 05, 2014, 08:28:56 AM
Min stake age is 24hrs right?
Been around 30 hours since I transferred my coins from Bittrex to personal wallet, no stake yet. Is there a command I can run in the debug console to know it's staking, and how long I have until POS generation? My wallet is not locked or encrypted.
I'm not seeing any blocks with > 0 coins in the block explorer either.
Been around 30 hours since I transferred my coins from Bittrex to personal wallet, no stake yet. Is there a command I can run in the debug console to know it's staking, and how long I have until POS generation? My wallet is not locked or encrypted.
I'm not seeing any blocks with > 0 coins in the block explorer either.
August 05, 2014, 07:39:34 AM
Is anyone else having a problem with their Antminer S3 configuration with the new wallet addresses?
I have MMXIV as a backup pool in my configuration. When I switched the username to the wallet address starting with 'M' the S3 wouldn't ever start hashing. As soon as I removed the MMXIV pool or replaced it, it works fine. This is on 2 separate units. I know the S3 uses CGMiner. Is there something about a username being a wallet address starting with M that would cause problems like that?
I have MMXIV as a backup pool in my configuration. When I switched the username to the wallet address starting with 'M' the S3 wouldn't ever start hashing. As soon as I removed the MMXIV pool or replaced it, it works fine. This is on 2 separate units. I know the S3 uses CGMiner. Is there something about a username being a wallet address starting with M that would cause problems like that?
August 05, 2014, 01:16:03 AM
If your wallet isn't encrypted all you have to do is receive coins in your client and leave it running. No passwords, mining programs like cgminer, etc. needed.
I could be mistaken, but I think you normally have to specify server=1 in your conf file in order to mint stake blocks. It's been less than 24hrs for me so I'm not sure if I'm generating stake yet.
sample mmxiv.conf:
Code:
server=1
rpcuser=somereallylongusername
rpcpassword=somethingreallylongandcomplicated
rpcuser=somereallylongusername
rpcpassword=somethingreallylongandcomplicated
I only have one line in my .conf file which is maxconnections=15. and all of my other POS coins and they all stake fine.
Jump to: