MonetaryUnit realtime data on web; working with Chrome, Firefox, and Safari
https://bitscreener.com/coins/monetaryunit/real_time
Topic: [ANN] MonetaryUnit [MUE] - POS. MasterNodes. Funding. Governance. Services. Devs - page 28. (Read 450731 times)
December 19, 2017, 05:34:02 AM
December 19, 2017, 03:31:04 AM
I have a lot of mue to swap. how much longer will I be able to swap it...don't have access to the pc it is stored on till after the holidays.
Sorry you can't swap any more coins.
The old blockchain is killed, nothing can be sent on it anymore. The swap was ongoing in two stages for over 6 months. All coins have been burned and the old quark MUE can no longer be swapped for the new MUE-X11 tokens.
I am trying to withdraw 25,000 MUE from a wallet at a white label exchange. Every time I try to withdraw to the wallet I downloaded from the MUE website, I get an "invalid address" from the exchange. Please do not tell me I cannot withdraw them because they are still on the Quark and should have changed to the new chain. If this is the case is there anything we can do?
What white label exchange ? and when did you buy them? you could be a victim of fraud..
It is off CryptoNext and the coins were given 4 years ago by the devs for assisting them with something. I was then offline for pretty much 3 years due to family/health issues, so this is not fraud as far as I can see it. CN probably just forgot to update the wallet. My question is more what to do now?
Well sorry to say, you are a victim of their incompetence..
Ample time was made for the Swap which has ended.
Nothing you can do to swap those coins, the only thing They can do is compensate you due to their negligence.
December 19, 2017, 01:51:45 AM
I have a lot of mue to swap. how much longer will I be able to swap it...don't have access to the pc it is stored on till after the holidays.
Sorry you can't swap any more coins.
The old blockchain is killed, nothing can be sent on it anymore. The swap was ongoing in two stages for over 6 months. All coins have been burned and the old quark MUE can no longer be swapped for the new MUE-X11 tokens.
I am trying to withdraw 25,000 MUE from a wallet at a white label exchange. Every time I try to withdraw to the wallet I downloaded from the MUE website, I get an "invalid address" from the exchange. Please do not tell me I cannot withdraw them because they are still on the Quark and should have changed to the new chain. If this is the case is there anything we can do?
What white label exchange ? and when did you buy them? you could be a victim of fraud..
It is off CryptoNext and the coins were given 4 years ago by the devs for assisting them with something. I was then offline for pretty much 3 years due to family/health issues, so this is not fraud as far as I can see it. CN probably just forgot to update the wallet. My question is more what to do now?
December 18, 2017, 04:19:47 PM
I have a lot of mue to swap. how much longer will I be able to swap it...don't have access to the pc it is stored on till after the holidays.
Sorry you can't swap any more coins.
The old blockchain is killed, nothing can be sent on it anymore. The swap was ongoing in two stages for over 6 months. All coins have been burned and the old quark MUE can no longer be swapped for the new MUE-X11 tokens.
I am trying to withdraw 25,000 MUE from a wallet at a white label exchange. Every time I try to withdraw to the wallet I downloaded from the MUE website, I get an "invalid address" from the exchange. Please do not tell me I cannot withdraw them because they are still on the Quark and should have changed to the new chain. If this is the case is there anything we can do?
What white label exchange ? and when did you buy them? you could be a victim of fraud..
December 18, 2017, 12:15:41 PM
I have a lot of mue to swap. how much longer will I be able to swap it...don't have access to the pc it is stored on till after the holidays.
Sorry you can't swap any more coins.
The old blockchain is killed, nothing can be sent on it anymore. The swap was ongoing in two stages for over 6 months. All coins have been burned and the old quark MUE can no longer be swapped for the new MUE-X11 tokens.
I am trying to withdraw 25,000 MUE from a wallet at a white label exchange. Every time I try to withdraw to the wallet I downloaded from the MUE website, I get an "invalid address" from the exchange. Please do not tell me I cannot withdraw them because they are still on the Quark and should have changed to the new chain. If this is the case is there anything we can do?
December 17, 2017, 05:24:29 PM
MUENIT
December 15, 2017, 06:27:31 PM
Greetings, friends at MonetaryUnit! As Komodo Platform has been working around the clock to fine-tune the multiple GUI's that are the face of our Agama multiwallet and BarterDEX atomic swap protocols, there have obviously been many bugs found and many debugged. However, one bug in particular was found not only in our Agama GUI wallet, but also in the zcash4mac GUI swing wallet. It is a simple bug, but it warrants your attention. This is a potential money cost bug, and as a Bitcoin-protocol cryptocurrency, your GUI wallet(s) may be susceptible. We are reaching out directly to the developers and communities of the 60+ coins featured on Agama and BarterDEX as the bug may have a direct impact on you (via your own wallet).
watchonly-GUI bug: 'watchonly' addresses appearing as your own in GUI wallet; users could potentially send funds to the address, unaware it is not theirs or available for withdrawal. You can import and it becomes a 'watchonly' address. The GUI will display the address as yours, add its funds to your balance, and accept deposits, but cannot be withdrawn. This could be a normal address, my address, a p2sh address, satoshi's address, etc. This can be confusing to an end-user and will lead to many headaches for the developer, as is always the case with misplaced funds.
FOUND: in Komodo Platform's Agama multiwallet (fixed) and zcash4mac GUI swing wallet (@jl777b: "newest QT wallet seems ok about watch only, but not sure of older and when it was fixed")
ex. @grewalsatinder found the bug in his zcash swing wallet: https://i.imgur.com/sVd0QTL.png
SOLUTION: For the 'watchonly' address or any address not yours, the value 'ismine' returns false. Any such address gets filtered out.
QUESTIONS:
We need to experiment a bit to see which approach gets a better response triggering the bug. People WILL lose money if they send funds to a watchonly address.
We want to spread awareness and facilitate discussion of this bug to minimize the impact.
Of course - we can always talk about how you can use BarterDEX today to trade MonetaryUnit via atomic swap directly with your peers, through our beta GUI and without downloading the entire blockchain ; ) That is how we found the bug, afterall.
Stay safe,
Jay
watchonly-GUI bug: 'watchonly' addresses appearing as your own in GUI wallet; users could potentially send funds to the address, unaware it is not theirs or available for withdrawal. You can import
FOUND: in Komodo Platform's Agama multiwallet (fixed) and zcash4mac GUI swing wallet (@jl777b: "newest QT wallet seems ok about watch only, but not sure of older and when it was fixed")
ex. @grewalsatinder found the bug in his zcash swing wallet: https://i.imgur.com/sVd0QTL.png
Quote from: jl777B
"satinder used zcash4mac, ie. the zcash osx GUI, not ours... the assumption is no GUI out there properly handles watch only addresses, until proven that they do... agama also had this bug, which we found and fixed, so it seems a very common bug to have"
SOLUTION: For the 'watchonly' address or any address not yours, the value 'ismine' returns false. Any such address gets filtered out.
QUESTIONS:
- How does your recommended GUI deal with watchonly addresses?
- Does your GUI display watchonly addresses as different than actual addresses in the wallet?
We need to experiment a bit to see which approach gets a better response triggering the bug. People WILL lose money if they send funds to a watchonly address.
Quote from: jl777B
"the t3 addresses in the 'Own Addresses' column! and they absolutely cant be as they are p2sh addresses. it is clear proof that the bug is very real and anybody that understands a p2sh address will understand it cant be something in your wallet. it is usually a multisig address, so only if it is a 1of1 multisig (possible but very silly) can you have a p2sh address that is spendable, but the wallet wont even know it... normal addresses can also be watchonly, which makes this even worse. in that case it would appear in the list of addresses just like all the others. even if you are able to spot p2sh addresses visually, it wont be enough"
We want to spread awareness and facilitate discussion of this bug to minimize the impact.
Of course - we can always talk about how you can use BarterDEX today to trade MonetaryUnit via atomic swap directly with your peers, through our beta GUI and without downloading the entire blockchain ; ) That is how we found the bug, afterall.
Stay safe,
Jay
December 14, 2017, 06:18:33 PM
Hi there,
Is there any news in terms of new projects being startef for MUE.
It's been a while now.
Is there any news in terms of new projects being startef for MUE.
It's been a while now.
I believe the main value added of MUE is really (besides the support and activity) the masternode. Many invest and get more than many banks offer on top it's a good currency. Long term if all stay as it is now , more and more people should joint and this by itself will be a great success.
December 13, 2017, 03:44:21 AM
Hi there,
Is there any news in terms of new projects being startef for MUE.
It's been a while now.
Is there any news in terms of new projects being startef for MUE.
It's been a while now.
December 12, 2017, 05:02:08 PM
[
I have also tried with MUEcore QT-wallet, with the same amount of 200 MUE, and I get the same error.
I will try with smaller amounts.
Regards.
I have also tried with MUEcore QT-wallet, with the same amount of 200 MUE, and I get the same error.
I will try with smaller amounts.
Regards.
Next time, you should take a look at the coin control feature of the QT wallet, there you could add a bunch of small transactions to make a bigger one. Send the coins to a new address of yours to group the transactions together, creating a larger output. My guess is that if you have been mining and getting a large quantity of small payouts, the size of the transaction to send these all at once will be larger then the threshold in the wallet code.
December 12, 2017, 07:38:57 AM
Hello,
I am sending MUE to other wallet, but the mue-cli don't work for me:
$ mue-cli sendtoaddress "destaddress" 200
error code: -4
error message:
Transaction too large
How can I solve this?.
Best regards.
I am sending MUE to other wallet, but the mue-cli don't work for me:
$ mue-cli sendtoaddress "destaddress" 200
error code: -4
error message:
Transaction too large
How can I solve this?.
Best regards.
The transaction you are trying to build is probably made up of many small transactions, making the transaction too large in size, not the amount you are trying to send but rather the shear amount of transaction inputs.
Try sending a smaller amount or you will have to send a few transactions to yourself to create a larger sum thus reducing the amount of transaction inputs.
Its much easier to do this with the MUEcore wallet with coin control in the sending tab, but try with smaller transactions to see if that works from the cli.
Hello,
What’s MUEcore wallet. Is mued?. I’m in desktop Linux. I have running mued as daemon and I work usually with mue-cli.
Best regards.
Yes, the MUEcore QT-wallet. But if you are more comfortable working in the command line then trey sending smaller amounts, eg using fewer transaction inputs to either group your balances together or simply send multiple smaller amounts to wherever you intended to send the coins.
I have also tried with MUEcore QT-wallet, with the same amount of 200 MUE, and I get the same error.
I will try with smaller amounts.
Regards.
December 12, 2017, 06:49:01 AM
Hello,
I am sending MUE to other wallet, but the mue-cli don't work for me:
$ mue-cli sendtoaddress "destaddress" 200
error code: -4
error message:
Transaction too large
How can I solve this?.
Best regards.
I am sending MUE to other wallet, but the mue-cli don't work for me:
$ mue-cli sendtoaddress "destaddress" 200
error code: -4
error message:
Transaction too large
How can I solve this?.
Best regards.
The transaction you are trying to build is probably made up of many small transactions, making the transaction too large in size, not the amount you are trying to send but rather the shear amount of transaction inputs.
Try sending a smaller amount or you will have to send a few transactions to yourself to create a larger sum thus reducing the amount of transaction inputs.
Its much easier to do this with the MUEcore wallet with coin control in the sending tab, but try with smaller transactions to see if that works from the cli.
Hello,
What’s MUEcore wallet. Is mued?. I’m in desktop Linux. I have running mued as daemon and I work usually with mue-cli.
Best regards.
Yes, the MUEcore QT-wallet. But if you are more comfortable working in the command line then trey sending smaller amounts, eg using fewer transaction inputs to either group your balances together or simply send multiple smaller amounts to wherever you intended to send the coins.
December 12, 2017, 04:53:47 AM
Hello,
I am sending MUE to other wallet, but the mue-cli don't work for me:
$ mue-cli sendtoaddress "destaddress" 200
error code: -4
error message:
Transaction too large
How can I solve this?.
Best regards.
I am sending MUE to other wallet, but the mue-cli don't work for me:
$ mue-cli sendtoaddress "destaddress" 200
error code: -4
error message:
Transaction too large
How can I solve this?.
Best regards.
The transaction you are trying to build is probably made up of many small transactions, making the transaction too large in size, not the amount you are trying to send but rather the shear amount of transaction inputs.
Try sending a smaller amount or you will have to send a few transactions to yourself to create a larger sum thus reducing the amount of transaction inputs.
Its much easier to do this with the MUEcore wallet with coin control in the sending tab, but try with smaller transactions to see if that works from the cli.
Hello,
What’s MUEcore wallet. Is mued?. I’m in desktop Linux. I have running mued as daemon and I work usually with mue-cli.
Best regards.
December 12, 2017, 04:45:08 AM
Hello,
I am sending MUE to other wallet, but the mue-cli don't work for me:
$ mue-cli sendtoaddress "destaddress" 200
error code: -4
error message:
Transaction too large
How can I solve this?.
Best regards.
I am sending MUE to other wallet, but the mue-cli don't work for me:
$ mue-cli sendtoaddress "destaddress" 200
error code: -4
error message:
Transaction too large
How can I solve this?.
Best regards.
The transaction you are trying to build is probably made up of many small transactions, making the transaction too large in size, not the amount you are trying to send but rather the shear amount of transaction inputs.
Try sending a smaller amount or you will have to send a few transactions to yourself to create a larger sum thus reducing the amount of transaction inputs.
Its much easier to do this with the MUEcore wallet with coin control in the sending tab, but try with smaller transactions to see if that works from the cli.
December 12, 2017, 04:29:48 AM
Hello,
I am sending MUE to other wallet, but the mue-cli don't work for me:
$ mue-cli sendtoaddress "destaddress" 200
error code: -4
error message:
Transaction too large
How can I solve this?.
Best regards.
I am sending MUE to other wallet, but the mue-cli don't work for me:
$ mue-cli sendtoaddress "destaddress" 200
error code: -4
error message:
Transaction too large
How can I solve this?.
Best regards.
December 12, 2017, 12:53:25 AM
I have a lot of mue to swap. how much longer will I be able to swap it...don't have access to the pc it is stored on till after the holidays.
Sorry you can't swap any more coins.
The old blockchain is killed, nothing can be sent on it anymore. The swap was ongoing in two stages for over 6 months. All coins have been burned and the old quark MUE can no longer be swapped for the new MUE-X11 tokens.
December 11, 2017, 09:07:20 PM
I have a lot of mue to swap. how much longer will I be able to swap it...don't have access to the pc it is stored on till after the holidays.
December 11, 2017, 06:34:14 AM
with 500k you build masternode owners mafia, they will never vote to decrease a colateral input level(((
We have MasterNode shares at MyMUE.com which allow people to get MasterNode rewards with just 10,000 MUE.This effectively lowers the MasterNode collateral.
Your suggestion that a MasterNode mafia exists, is clearly not accurate.
December 11, 2017, 06:19:20 AM
with 500k you build masternode owners mafia, they will never vote to decrease a colateral input level(((
We have MasterNode shares at MyMUE.com which allow people to get MasterNode rewards with just 10,000 MUE.This effectively lowers the MasterNode collateral.
Your suggestion that a MasterNode mafia exists, is clearly not accurate.
December 11, 2017, 05:40:54 AM
with 500k you build masternode owners mafia, they will never vote to decrease a colateral input level(((
Jump to: