Topic: [ANN] PURE - Decentralized - Masternodes - PoS - page 49. (Read 69647 times)
PURE is one of th most stable coin (i mean ROI). Great! =)
Pure has performed very well since its start, the ROI for masternodes' owners is profitable too.
Yup. The ROI i see in my masternodes is slightly higher than what's published in masternodes.pro and the like. Like 30% higher than the numbers i saw there
Pure has performed very well since its start, the ROI for masternodes' owners is profitable too.
$5+ is good for feb 2018
Let's go then...i'm waiting 
Wow today get 112 reward 
amazing 
amazing For one masternode?!
its for staking with 30k coins
Wow today get 112 reward amazing
amazing For one masternode?!
Is that over 24 hours?
$5+ is good for feb 2018
Wow today get 112 reward amazing
amazing Any more details on PureDex coming? Sounds awesome
Leave something for next year!
I know I know, I'm an eager beaver
Any more details on PureDex coming? Sounds awesome
Leave something for next year!
Any more details on PureDex coming? Sounds awesome
Remove space from software-properties- common, should be software-properties-common
https://join.slack.com/t/purealt/shared_invite/enQtMjg4MzIzMjk0OTEyLTk2MTY4ZWMzZWYxMDc0YjM0M2NkZGIzNjU4OWRjMWU0MGRmNWExNmQxMzNhZDc0ZTU1ZDFlOWE5ODMxNzYxZmM
PURE: PT8a2bMoEkGnHJw8PLB7mreZiBoxfHFr9g
fine !!!! must look like thishttps://join.slack.com/t/purealt/shared_invite/enQtMjg4MzIzMjk0OTEyLTk2MTY4ZWMzZWYxMDc0YjM0M2NkZGIzNjU4OWRjMWU0MGRmNWExNmQxMzNhZDc0ZTU1ZDFlOWE5ODMxNzYxZmM
PURE: PT8a2bMoEkGnHJw8PLB7mreZiBoxfHFr9g
sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils software-properties-common -y
thank you
Remove space from software-properties- common, should be software-properties-common
https://join.slack.com/t/purealt/shared_invite/enQtMjg4MzIzMjk0OTEyLTk2MTY4ZWMzZWYxMDc0YjM0M2NkZGIzNjU4OWRjMWU0MGRmNWExNmQxMzNhZDc0ZTU1ZDFlOWE5ODMxNzYxZmM
PURE: PT8a2bMoEkGnHJw8PLB7mreZiBoxfHFr9g
https://join.slack.com/t/purealt/shared_invite/enQtMjg4MzIzMjk0OTEyLTk2MTY4ZWMzZWYxMDc0YjM0M2NkZGIzNjU4OWRjMWU0MGRmNWExNmQxMzNhZDc0ZTU1ZDFlOWE5ODMxNzYxZmM
PURE: PT8a2bMoEkGnHJw8PLB7mreZiBoxfHFr9g
Join our Slack, people will help you.
try to remove the "-y" at the end of the command line
Still doesn't work and says "Abort." 
Edit: How do I contact the devs to help me get this masternode up and running? Their Slacked group invite doesnt work
Hi,
I am trying to follow the video to set-up my PURE masternode (https://www.youtube.com/watch?v=egr38Nq7nsc)
When typing this into the Putty Command Promt:
"sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev
bsdmainutils software-properties- common -y"
it asks me:
"The following NEW packages will be installed:
autoconf automake autotools-dev build-essential cpp cpp-5 dpkg-dev fakeroot
g++ g++-5 gcc gcc-5 libalgorithm-diff-perl libalgorithm-diff-xs-perl
libalgorithm-merge-perl libasan2 libatomic1 libcc1-0 libcilkrts5
libdpkg-perl libfakeroot libfile-fcntllock-perl libgcc-5-dev libisl15
libitm1 liblsan0 libltdl-dev libmpc3 libmpx0 libquadmath0 libstdc++-5-dev
libtool libtsan0 libubsan0 pkg-config
0 upgraded, 35 newly installed, 0 to remove and 0 not upgraded.
Need to get 32.3 MB of archives.
After this operation, 113 MB of additional disk space will be used.
Do you want to continue? [Y/n]"
I type in "y" but then it says "Abort."
I dont know what to do. Can anyone help? Or is there a different way to get the masternode up and running? I found this guide but don't know whether it would work: https://masternodeguides.com/setup-pure-masternode-pure-masternodes/
HelloI am trying to follow the video to set-up my PURE masternode (https://www.youtube.com/watch?v=egr38Nq7nsc)
When typing this into the Putty Command Promt:
"sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev
bsdmainutils software-properties- common -y"
it asks me:
"The following NEW packages will be installed:
autoconf automake autotools-dev build-essential cpp cpp-5 dpkg-dev fakeroot
g++ g++-5 gcc gcc-5 libalgorithm-diff-perl libalgorithm-diff-xs-perl
libalgorithm-merge-perl libasan2 libatomic1 libcc1-0 libcilkrts5
libdpkg-perl libfakeroot libfile-fcntllock-perl libgcc-5-dev libisl15
libitm1 liblsan0 libltdl-dev libmpc3 libmpx0 libquadmath0 libstdc++-5-dev
libtool libtsan0 libubsan0 pkg-config
0 upgraded, 35 newly installed, 0 to remove and 0 not upgraded.
Need to get 32.3 MB of archives.
After this operation, 113 MB of additional disk space will be used.
Do you want to continue? [Y/n]"
I type in "y" but then it says "Abort."
I dont know what to do. Can anyone help? Or is there a different way to get the masternode up and running? I found this guide but don't know whether it would work: https://masternodeguides.com/setup-pure-masternode-pure-masternodes/
try to remove the "-y" at the end of the command line
Edit: How do I contact the devs to help me get this masternode up and running? Their Slacked group invite doesnt work
YES! Price pumping !
Next Q1, go to moon while more exchange listed.
Next Q1, go to moon while more exchange listed.
Hi,
I am trying to follow the video to set-up my PURE masternode (https://www.youtube.com/watch?v=egr38Nq7nsc)
When typing this into the Putty Command Promt:
"sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev
bsdmainutils software-properties- common -y"
it asks me:
"The following NEW packages will be installed:
autoconf automake autotools-dev build-essential cpp cpp-5 dpkg-dev fakeroot
g++ g++-5 gcc gcc-5 libalgorithm-diff-perl libalgorithm-diff-xs-perl
libalgorithm-merge-perl libasan2 libatomic1 libcc1-0 libcilkrts5
libdpkg-perl libfakeroot libfile-fcntllock-perl libgcc-5-dev libisl15
libitm1 liblsan0 libltdl-dev libmpc3 libmpx0 libquadmath0 libstdc++-5-dev
libtool libtsan0 libubsan0 pkg-config
0 upgraded, 35 newly installed, 0 to remove and 0 not upgraded.
Need to get 32.3 MB of archives.
After this operation, 113 MB of additional disk space will be used.
Do you want to continue? [Y/n]"
I type in "y" but then it says "Abort."
I dont know what to do. Can anyone help? Or is there a different way to get the masternode up and running? I found this guide but don't know whether it would work: https://masternodeguides.com/setup-pure-masternode-pure-masternodes/
HelloI am trying to follow the video to set-up my PURE masternode (https://www.youtube.com/watch?v=egr38Nq7nsc)
When typing this into the Putty Command Promt:
"sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev
bsdmainutils software-properties- common -y"
it asks me:
"The following NEW packages will be installed:
autoconf automake autotools-dev build-essential cpp cpp-5 dpkg-dev fakeroot
g++ g++-5 gcc gcc-5 libalgorithm-diff-perl libalgorithm-diff-xs-perl
libalgorithm-merge-perl libasan2 libatomic1 libcc1-0 libcilkrts5
libdpkg-perl libfakeroot libfile-fcntllock-perl libgcc-5-dev libisl15
libitm1 liblsan0 libltdl-dev libmpc3 libmpx0 libquadmath0 libstdc++-5-dev
libtool libtsan0 libubsan0 pkg-config
0 upgraded, 35 newly installed, 0 to remove and 0 not upgraded.
Need to get 32.3 MB of archives.
After this operation, 113 MB of additional disk space will be used.
Do you want to continue? [Y/n]"
I type in "y" but then it says "Abort."
I dont know what to do. Can anyone help? Or is there a different way to get the masternode up and running? I found this guide but don't know whether it would work: https://masternodeguides.com/setup-pure-masternode-pure-masternodes/
try to remove the "-y" at the end of the command line
Edit: How do I contact the devs to help me get this masternode up and running? Their Slacked group invite doesnt work
Hi,
I am trying to follow the video to set-up my PURE masternode (https://www.youtube.com/watch?v=egr38Nq7nsc)
When typing this into the Putty Command Promt:
"sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev
bsdmainutils software-properties- common -y"
it asks me:
"The following NEW packages will be installed:
autoconf automake autotools-dev build-essential cpp cpp-5 dpkg-dev fakeroot
g++ g++-5 gcc gcc-5 libalgorithm-diff-perl libalgorithm-diff-xs-perl
libalgorithm-merge-perl libasan2 libatomic1 libcc1-0 libcilkrts5
libdpkg-perl libfakeroot libfile-fcntllock-perl libgcc-5-dev libisl15
libitm1 liblsan0 libltdl-dev libmpc3 libmpx0 libquadmath0 libstdc++-5-dev
libtool libtsan0 libubsan0 pkg-config
0 upgraded, 35 newly installed, 0 to remove and 0 not upgraded.
Need to get 32.3 MB of archives.
After this operation, 113 MB of additional disk space will be used.
Do you want to continue? [Y/n]"
I type in "y" but then it says "Abort."
I dont know what to do. Can anyone help? Or is there a different way to get the masternode up and running? I found this guide but don't know whether it would work: https://masternodeguides.com/setup-pure-masternode-pure-masternodes/
HelloI am trying to follow the video to set-up my PURE masternode (https://www.youtube.com/watch?v=egr38Nq7nsc)
When typing this into the Putty Command Promt:
"sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev
bsdmainutils software-properties- common -y"
it asks me:
"The following NEW packages will be installed:
autoconf automake autotools-dev build-essential cpp cpp-5 dpkg-dev fakeroot
g++ g++-5 gcc gcc-5 libalgorithm-diff-perl libalgorithm-diff-xs-perl
libalgorithm-merge-perl libasan2 libatomic1 libcc1-0 libcilkrts5
libdpkg-perl libfakeroot libfile-fcntllock-perl libgcc-5-dev libisl15
libitm1 liblsan0 libltdl-dev libmpc3 libmpx0 libquadmath0 libstdc++-5-dev
libtool libtsan0 libubsan0 pkg-config
0 upgraded, 35 newly installed, 0 to remove and 0 not upgraded.
Need to get 32.3 MB of archives.
After this operation, 113 MB of additional disk space will be used.
Do you want to continue? [Y/n]"
I type in "y" but then it says "Abort."
I dont know what to do. Can anyone help? Or is there a different way to get the masternode up and running? I found this guide but don't know whether it would work: https://masternodeguides.com/setup-pure-masternode-pure-masternodes/
try to remove the "-y" at the end of the command line
Hi,
I am trying to follow the video to set-up my PURE masternode (https://www.youtube.com/watch?v=egr38Nq7nsc)
When typing this into the Putty Command Promt:
"sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev
bsdmainutils software-properties- common -y"
it asks me:
"The following NEW packages will be installed:
autoconf automake autotools-dev build-essential cpp cpp-5 dpkg-dev fakeroot
g++ g++-5 gcc gcc-5 libalgorithm-diff-perl libalgorithm-diff-xs-perl
libalgorithm-merge-perl libasan2 libatomic1 libcc1-0 libcilkrts5
libdpkg-perl libfakeroot libfile-fcntllock-perl libgcc-5-dev libisl15
libitm1 liblsan0 libltdl-dev libmpc3 libmpx0 libquadmath0 libstdc++-5-dev
libtool libtsan0 libubsan0 pkg-config
0 upgraded, 35 newly installed, 0 to remove and 0 not upgraded.
Need to get 32.3 MB of archives.
After this operation, 113 MB of additional disk space will be used.
Do you want to continue? [Y/n]"
I type in "y" but then it says "Abort."
I dont know what to do. Can anyone help? Or is there a different way to get the masternode up and running? I found this guide but don't know whether it would work: https://masternodeguides.com/setup-pure-masternode-pure-masternodes/
I am trying to follow the video to set-up my PURE masternode (https://www.youtube.com/watch?v=egr38Nq7nsc)
When typing this into the Putty Command Promt:
"sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev
bsdmainutils software-properties- common -y"
it asks me:
"The following NEW packages will be installed:
autoconf automake autotools-dev build-essential cpp cpp-5 dpkg-dev fakeroot
g++ g++-5 gcc gcc-5 libalgorithm-diff-perl libalgorithm-diff-xs-perl
libalgorithm-merge-perl libasan2 libatomic1 libcc1-0 libcilkrts5
libdpkg-perl libfakeroot libfile-fcntllock-perl libgcc-5-dev libisl15
libitm1 liblsan0 libltdl-dev libmpc3 libmpx0 libquadmath0 libstdc++-5-dev
libtool libtsan0 libubsan0 pkg-config
0 upgraded, 35 newly installed, 0 to remove and 0 not upgraded.
Need to get 32.3 MB of archives.
After this operation, 113 MB of additional disk space will be used.
Do you want to continue? [Y/n]"
I type in "y" but then it says "Abort."
I dont know what to do. Can anyone help? Or is there a different way to get the masternode up and running? I found this guide but don't know whether it would work: https://masternodeguides.com/setup-pure-masternode-pure-masternodes/
with my stake get 42 PURE daily
How many coins are you staking?30000
You should build some masternodes then...You will get way more rewards
This is PURE joy :-) Go Pure gooooo
Jump to: