Topic: [ANN] Signatum - New Algorithm - Fair Launch - No Premine - page 163. (Read 823897 times)

Thank you sir.

It seems like the community is very dedicated and we believe this coin has potential to succeed.

I am hoping the market place gains traction. A lot of coins seem to be great until you realize you can't actually use them for anything practical.

Dear everyone,

this is an interesting coin with potential. The dev is active, distribution is fair and the new algorithm proves that he is able to implement new features. However, I am not sure about the unique features of the coin, that will distinguish this altcoin from other altcoins. The roadmap is quite nice and the foundation is surely a good thing to start, but are there also plans for other new technical features for the coin?

Keep up the great support and work, kind regards
Halcyon D.

how can i push my machine to higher hashrates, i read it the -I command line that pushes the cards more?
For me it was maximum -I 23 but there was not a big increase in hashrate. Larger wattage. So I used max -I 20. On RX 480 8gb with sgminer 17.5 Mh/s

Should I use a different miner for AMD cards? Yes. I've been using the prospector miner: https://bitcointalk.org/index.php?topic=2033185.0;all

What kind of hash should I expect from 580s? I have an Rx 480 8gb (1303/2000) and the hashrate results were: 21.5 Mh/s at a prospector miner.

wouldnt u want to mine it now, low price, low difficulty, so when it does blow you get a great return?

Is there anyone still mine SIGT？ What about the total coin income for single 1060 and 1080ti?

I don't want to mine SIGT anymore, since it may boom in the future, I will watch this coin closely.

Price is still low now...

hey qualialibre thanks for the input, the current hash i have of 19.5 is without an OC, its only flashed with the timing.
i yet to crash an im up to 23 ill try 24 an see what that gives out, again thank you guys for your replies.

thank you sir, ill start tweaking!

Hi igotfits
Yes you can try -I 20, to 25. You stop when you saw intensity of one card starting to go down by itselfe. Or when windows freeze or crashes. Then you know you found the ideal maximum for all cards

If you want to be fully optimal and not play with OC, what I suggest is to tune every card (becasue  no cards are the same  !)

So your ideal max was 22, then you go :
sgminer -k skunkhash --gpu-platform 1 -o stratum+tcp://sigt.suprnova.cc:7106 -u hidden.hidden -p hidden -I 22,22,22,22,22,2
Run 5 minutes. Observe  I: flickering.
sgminer -k skunkhash --gpu-platform 1 -o stratum+tcp://sigt.suprnova.cc:7106 -u hidden.hidden -p hidden -I 23,22,22,22,22,22
Run 5 minutes. Observe  I: flickering.
sgminer -k skunkhash --gpu-platform 1 -o stratum+tcp://sigt.suprnova.cc:7106 -u hidden.hidden -p hidden -I 23,23,22,22,22,22
Run 5 minutes. Observe no I: flickering.
sgminer -k skunkhash --gpu-platform 1 -o stratum+tcp://sigt.suprnova.cc:7106 -u hidden.hidden -p hidden -I 23,23,22,22,22,22
Run 5 minutes. Observe no I: flickering.
sgminer -k skunkhash --gpu-platform 1 -o stratum+tcp://sigt.suprnova.cc:7106 -u hidden.hidden -p hidden -I 23,23,23,22,22,22
...
When it crashes then you found the optimal max for that card. You note it, lower it by 1, and continue the itterations on the other cards.
At the end you have sonmething like this
sgminer -k skunkhash --gpu-platform 1 -o stratum+tcp://sigt.suprnova.cc:7106 -u hidden.hidden -p hidden -I 19,21,21,23,21,24

On another note, I must say 19.2 is quite low for a 580. I get this on my 480.

And also if you want 5% faster MHs you can download  the miner I optimized based on the official signatum amd miner. Did not test it with a 580, but my 480 went from 18.2 to 19.2 !
If you're scared of the .exe, then just unzip the kernel folder on top of the one in your sgminer folder.
https://github.com/qualialibre/signatum.miner


QualiaLibre

The Skunkhash algorithm is different to the Ethash algorithm used for ETH so it is normal to get a different hash rate.
I get roughly the same with my RX 580/570 cards so the speeds you are getting are normal.
Skunkhash is a GPU intensive algorithm where Ethash is more memory intensive, so you can try dropping your memory clock and increasing your core clock to squeeze a little more performance.
You can also try increasing the -I command as well. Do it in increments of 1 till you find a sweet spot.

hey everyone im new to SIGT and SKUNKHASH all together.
im hoping someone can lend me their expertise on my set up, i have been mining for weeks not months but have only been using claymore.
i will list my steps and settings, thanks a ton again for reading!

steps:

1. downloaded client wallet for windows from https://signatum.io
2. downloaded AMD miner from https://signatum.io
3. created account on suprnova.cc for sigt mining.
4. set my bat file with these current lines:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

sgminer -k skunkhash --gpu-platform 1 -o stratum+tcp://sigt.suprnova.cc:7106 -u hidden.hidden -p hidden -I 20


my current stats in the miner, i assume my hash rate it 19? FYI im running 3 brand new rx580s asus strix all samsung memory an flashed. these were pushing a nice 30+MH/s in claymore for ETH mining.

Pool management GPU management Settings Display options Quit
GPU 0:  56.0C 1479RPM | 19.10M/19.19Mh/s | R:  0.0% HW:0 WU:0.213/m I:20
GPU 1:  58.0C 1464RPM | 19.21M/19.20Mh/s | R:  0.0% HW:0 WU:0.265/m I:20
GPU 2:  52.0C 1401RPM | 19.21M/19.20Mh/s | R:  0.0% HW:0 WU:0.205/m I:20

how can i push my machine to higher hashrates, i read its the -I command line that pushes the cards more?
Should i be using a different miner for AMD cards?
What type of hash should i expect from 580s?

Thank you ill try ;-)

Since there is already 4 class action lawsuits pending against 4 different exchanges, I think maybe we should look at doing the same against cryptopia. They are holding our Sigs hostage..

Easy. Download and configure to use any wallet or local node.
https://bitcointalksearch.org/topic/minifaucet-script-a-myfaucet-replacement-333748

You'll get faucet like this:
https://crocfaucet.blockstats.pw

I would like to put a Signatum faucet on my website..

Somebody can help me?

This is kind of fishy since their is about 10 days left for mining !
How come an exchange pretend to 'work on wallets' for weeks like that. It's not rocket science !

cryptopia wallet will only be resolved in 2 weeks if we believe the wallet tx rate is 3/s and just above 1M tx left...

Cryptopia is significantly lower than the other exchanges now.

anyone knows if devs talked to the BarterDEX to add signatum to their decentrilzed exchange?

i can not be in the telegram/discord right now
so if you can check pls

This jootn2kx is a former supporter of SIGT turned fudder. Probably one of crowetic's minions.


You're probably right Epicyclic. That explains why he keeps coming back for updates. That makes sense. SIGT is just a 2 month old coin, there are plenty of coins to buy now if he indeed was able to sell at the top. But instead of leaving and enjoying his profits, he keeps coming back.