[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 570.

murdof

full member

Activity: 196

Merit: 100

Quote from: jimmothy on June 13, 2014, 04:55:38 PM

Quote from: Guy Corem on June 10, 2014, 01:23:44 AM

Hello my friend, I've missed you. Is it too boring at one of AM threads ?

None of those companies can match the price point of SP30 with current gen and Q3 planned hardware.

It has already been done.

http://shop.rockminer.com/goods.php?id=34

2880gh for 4btc.

When i see a site with Chinese font - I know i just have to close the tab...

raskul

sr. member

Activity: 434

Merit: 250

Quote from: jimmothy on June 13, 2014, 04:55:38 PM

Quote from: Guy Corem on June 10, 2014, 01:23:44 AM

Hello my friend, I've missed you. Is it too boring at one of AM threads ?

None of those companies can match the price point of SP30 with current gen and Q3 planned hardware.

It has already been done.

http://shop.rockminer.com/goods.php?id=34

2880w vapourware for 4btc.

cheap.chinese.junk

you are welcome to it.

jimmothy

hero member

Activity: 770

Merit: 509

Quote from: Guy Corem on June 10, 2014, 01:23:44 AM

Hello my friend, I've missed you. Is it too boring at one of AM threads ?

None of those companies can match the price point of SP30 with current gen and Q3 planned hardware.

It has already been done.

http://shop.rockminer.com/goods.php?id=34

2880gh for 4btc.

jonnybravo0311

legendary

Activity: 1344

Merit: 1024

Mine at Jonny's Pool

Quote from: zvisha on June 12, 2014, 07:42:45 PM

Quote from: jonnybravo0311 on June 12, 2014, 04:18:32 PM

Gotcha. Thanks

According to Con the problem is now resolved. I didn't test it since I am not at work.
I created an image 1.4.4 (experimental) with latest cgminer, you can test and see if it works for you (remember to rm /mnt/config/etc/bin/cgminer).

Hey Zvisha,

Just wanted to let you and Con know that the fix provided in the 1.4.4 firmware resolved the p2pool problem. Thanks for the quick turnaround!

raskul

sr. member

Activity: 434

Merit: 250

Quote from: TheJuice on June 13, 2014, 02:18:33 PM

Any news of the June 10th batch? Shipping soon? Price barely moved with this batch.

Quote from: Guy Corem on June 12, 2014, 02:09:03 AM

Quote from: raskul on June 12, 2014, 01:37:32 AM

can we have a status update on June batch please? thanks

Small number of shipping will be today.
More on Monday and Wednesday or Thursday next week.

TheJuice

hero member

Activity: 845

Merit: 609

Any news of the June 10th batch? Shipping soon? Price barely moved with this batch.

windpath

legendary

Activity: 1258

Merit: 1027

Quote from: Zelek Uther on June 12, 2014, 11:25:00 PM

Quote from: murdof on June 12, 2014, 11:15:41 PM

About 51% the best solution is P2Pool - but the problem is that there is even more variance due to low speed.
If more people jump on P2Pool then we will not have to speak about 51% again.
In the long run you get same and better payouts but some weeks it shit.
So for example you might see that you get no payments for 3 days - but then get 3 payments in one day.

I agree.

I read up about P2Pool a while ago, and it has been on my To Do list for a while. Don't you need to run a full Node for that? I tried to run a Node on a RaspPi, then gave up.

I'd like to invite all SP customers to give our new p2pool super node a shot.

0% fees, enterprise class hardware and redundancy, latency based routing, etc...

Decentralizing mining is a top priority for the continued trust and growth of Bitcoin.

http://minefast.coincadence.com

guytechie

hero member

Activity: 677

Merit: 500

Quote from: wanna4fun on June 13, 2014, 03:57:35 AM

Hi everyone;

I had an issue with the PSU (broke because of bad luck). Spondoolies replied to mail 5 mns after my request with : "give us your pool credentials".
Few hour later I had a SP10 configured in israel hashing for me. Thanks Spondoolies !
I now received my fresh new PSU and everything is back to normal. Thanks Spondoolies !
Firmware 1.4.3 is awesome, 1.5+TH/s with 1%-0.5% HW errors. Thanks Spondoolies !

If anyone read me and want to invest in a miner, I highly recommend SP-T. They are reliable, great after sales support and well... good at what they do.

@SP-Tech : Thank you again team, you have better after sales support than some of the biggest IT actor on the market.

Keep it up, Spondoolies! You guys built a great reputation in a short amount of time!

Guy gave me a 15% off future purchase because I was unhappy with the slower hashrate on 110v. This was before it was well known that the SP10 was current-limited on 110v. I figured Spondoolies has such a great rep, a future purchase would probably happen anyways, so I decided the 15% off future purchase was a fair compensation.

BTW, I lifted the cap and can confirm they can hash at 1.4 TH on 110v! (1260 W setting) Of course, the power draw at the wall is around 1440 W so I went back to the 1100 W limit (around 1200 W at the wall). At 1.4 TH, the wires were getting hot (120 C) - I only had 16 gauge wires. So can't do that...

Edit: Next unit (maybe after SP30s), please have noise level and US 110v customers in mind as well. ;-)

wpgdeez

hero member

Activity: 728

Merit: 500

Quote from: wanna4fun on June 13, 2014, 03:57:35 AM

Hi everyone;

I had an issue with the PSU (broke because of bad luck). Spondoolies replied to mail 5 mns after my request with : "give us your pool credentials".
Few hour later I had a SP10 configured in israel hashing for me. Thanks Spondoolies !
I now received my fresh new PSU and everything is back to normal. Thanks Spondoolies !
Firmware 1.4.3 is awesome, 1.5+TH/s with 1%-0.5% HW errors. Thanks Spondoolies !

If anyone read me and want to invest in a miner, I highly recommend SP-T. They are reliable, great after sales support and well... good at what they do.

@SP-Tech : Thank you again team, you have better after sales support than some of the biggest IT actor on the market.

Good work Spondoolies.

murdof

full member

Activity: 196

Merit: 100

Quote from: -ck on June 13, 2014, 07:33:50 AM

Quote from: zvisha on June 13, 2014, 07:08:34 AM

The cgminer API computes the rate by values miner gate provides, and I didn't put too much effort into making it 100% correct - it's not trivial to do in our architecture. It`s way less accurate then what you see in the WebUI.
What you see in the pool is the most accurate, but it is not very stable because of the nondeterministic nature of mining.

This is why every other driver in cgminer reports hashrate based on valid shares returned, but my input into this driver was minimal and I did not bother to rewrite the hashrate meter since there were virtually no complaints about the inaccuracy of the hashrate meter before this so I did not see any need to force the issue.

Personally I'm not bothered by this.

In the past firmwares there were sometimes that SP10 reported that it was mining at 1.40TH/s while API was showing 50Kh/s.
I knew that something was wrong with SP10's reading because at the ASIC page it was saying it was drawing ~ 800V. The pool speed also dropped.
After a couple reboots everything worked fine.

I haven't seen this issue in the latest fimwares.

raskul

sr. member

Activity: 434

Merit: 250

Quote from: -ck on June 13, 2014, 07:33:50 AM

Quote from: zvisha on June 13, 2014, 07:08:34 AM

The cgminer API computes the rate by values miner gate provides, and I didn't put too much effort into making it 100% correct - it's not trivial to do in our architecture. It`s way less accurate then what you see in the WebUI.
What you see in the pool is the most accurate, but it is not very stable because of the nondeterministic nature of mining.

This is why every other driver in cgminer reports hashrate based on valid shares returned, but my input into this driver was minimal and I did not bother to rewrite the hashrate meter since there were virtually no complaints about the inaccuracy of the hashrate meter before this so I did not see any need to force the issue.

I haz Bitcoinz Grin

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: zvisha on June 13, 2014, 07:08:34 AM

The cgminer API computes the rate by values miner gate provides, and I didn't put too much effort into making it 100% correct - it's not trivial to do in our architecture. It`s way less accurate then what you see in the WebUI.
What you see in the pool is the most accurate, but it is not very stable because of the nondeterministic nature of mining.

This is why every other driver in cgminer reports hashrate based on valid shares returned, but my input into this driver was minimal and I did not bother to rewrite the hashrate meter since there were virtually no complaints about the inaccuracy of the hashrate meter before this so I did not see any need to force the issue.

murdof

full member

Activity: 196

Merit: 100

Quote from: zvisha on June 13, 2014, 07:08:34 AM

The cgminer API computes the rate by values miner gate provides, and I didn't put too much effort into making it 100% correct - it's not trivial to do in our architecture. It`s way less accurate then what you see in the WebUI.
What you see in the pool is the most accurate, but it is not very stable because of the nondeterministic nature of mining.

OK I have no problem with that.
Just to make sure that everything is working OK.

Is there any issue if I increase fans to 90% (i don't care about the noise)?

zvisha

hero member

Activity: 560

Merit: 500

The cgminer API computes the rate by values miner gate provides, and I didn't put too much effort into making it 100% correct - it's not trivial to do in our architecture. It`s way less accurate then what you see in the WebUI.
What you see in the pool is the most accurate, but it is not very stable because of the nondeterministic nature of mining.

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: murdof on June 13, 2014, 12:50:57 AM

... I assume the values on btcguild were lower because of bad luck ...

btcguild bad luck won't affect the hash rate you see. It will affect the payouts only.

Biffa

legendary

Activity: 3234

Merit: 1221

Quote from: raskul on June 13, 2014, 04:15:14 AM

Quote from: Bicknellski on June 13, 2014, 04:13:00 AM

Quote from: wanna4fun on June 13, 2014, 03:57:35 AM

Hi everyone;

I had an issue with the PSU (broke because of bad luck). Spondoolies replied to mail 5 mns after my request with : "give us your pool credentials".
Few hour later I had a SP10 configured in israel hashing for me. Thanks Spondoolies !
I now received my fresh new PSU and everything is back to normal. Thanks Spondoolies !
Firmware 1.4.3 is awesome, 1.5+TH/s with 1%-0.5% HW errors. Thanks Spondoolies !

If anyone read me and want to invest in a miner, I highly recommend SP-T. They are reliable, great after sales support and well... good at what they do.

@SP-Tech : Thank you again team, you have better after sales support than some of the biggest IT actor on the market.

Oh shut up SP-tech now you are just showing off. Cripes. LOL.

lol, every right they have to do so too! every day is a day closer to SP30... Grin

Gotta say, best customer service of any bitcoin company so far. Better than many big IT hardware manufacturers. Also helps the hardware rocks

I used to use another Israeli company a long time ago for similar sized hardware, called RadWare, they were awesome as well for cool hardware and great CS.

Only service I have had on here that comes close is Mr Lee's group buys and hosting.

[edit] Oh and Roadstress' group buy was pretty smooth too

raskul

sr. member

Activity: 434

Merit: 250

Quote from: Bicknellski on June 13, 2014, 04:13:00 AM

Quote from: wanna4fun on June 13, 2014, 03:57:35 AM

Hi everyone;

I had an issue with the PSU (broke because of bad luck). Spondoolies replied to mail 5 mns after my request with : "give us your pool credentials".
Few hour later I had a SP10 configured in israel hashing for me. Thanks Spondoolies !
I now received my fresh new PSU and everything is back to normal. Thanks Spondoolies !
Firmware 1.4.3 is awesome, 1.5+TH/s with 1%-0.5% HW errors. Thanks Spondoolies !

If anyone read me and want to invest in a miner, I highly recommend SP-T. They are reliable, great after sales support and well... good at what they do.

@SP-Tech : Thank you again team, you have better after sales support than some of the biggest IT actor on the market.

Oh shut up SP-tech now you are just showing off. Cripes. LOL.

lol, every right they have to do so too! every day is a day closer to SP30... Grin

Bicknellski

hero member

Activity: 924

Merit: 1000

Quote from: wanna4fun on June 13, 2014, 03:57:35 AM

Hi everyone;

I had an issue with the PSU (broke because of bad luck). Spondoolies replied to mail 5 mns after my request with : "give us your pool credentials".
Few hour later I had a SP10 configured in israel hashing for me. Thanks Spondoolies !
I now received my fresh new PSU and everything is back to normal. Thanks Spondoolies !
Firmware 1.4.3 is awesome, 1.5+TH/s with 1%-0.5% HW errors. Thanks Spondoolies !

If anyone read me and want to invest in a miner, I highly recommend SP-T. They are reliable, great after sales support and well... good at what they do.

@SP-Tech : Thank you again team, you have better after sales support than some of the biggest IT actor on the market.

Oh shut up SP-tech now you are just showing off. Cripes. LOL.

wanna4fun

member

Activity: 119

Merit: 100

noobie

Hi everyone;

I had an issue with the PSU (broke because of bad luck). Spondoolies replied to mail 5 mns after my request with : "give us your pool credentials".
Few hour later I had a SP10 configured in israel hashing for me. Thanks Spondoolies !
I now received my fresh new PSU and everything is back to normal. Thanks Spondoolies !
Firmware 1.4.3 is awesome, 1.5+TH/s with 1%-0.5% HW errors. Thanks Spondoolies !

If anyone read me and want to invest in a miner, I highly recommend SP-T. They are reliable, great after sales support and well... good at what they do.

@SP-Tech : Thank you again team, you have better after sales support than some of the biggest IT actor on the market.

murdof

full member

Activity: 196

Merit: 100

Quote from: RoadStress on June 12, 2014, 11:50:19 PM

Quote from: opentoe on June 12, 2014, 11:48:42 PM

Quote from: RoadStress on June 12, 2014, 11:32:17 PM

murdof what's the pool speed for your miners?

I updated twp SP10's firmware and they are hashing a little slower than previously. I'll let them hash over night and take a peek again later. I usually get my highest hash readings on the the guild. If I use Ghash, it's all over the place.

The miners will report lower speed on GUI, but you will see higher speed on the pool. Since you just made your upgrade it will take a couple of hours to get some accurate numbers from both the miner and the pool.

Hey Road.

I see now the following for each miner:
btcguild: 1379.94GH/s and 1460.04 GH/s
sp10-gui: 1390.5GH/s and 1445.4 GH/s
cgminer api: 1286.92GH/s and 1336.75 GH/s

I assume the values on btcguild were lower because of bad luck. Now some blocks have been found so it is higher.

Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 570. (Read 1260354 times)