[ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More - page 2.

fenomenyaa

jr. member

Activity: 131

Merit: 2

Dear DEV,

New coins and new algorithms on town and profiatble., and yourminers amd RDNA3 support is poor, many algo not supported, Are you going to update your miner?I get used to your miner, and perform well. Pls update asap.

OXYGEN_06

newbie

Activity: 1

Merit: 0

DINT + ZIL not working. can you look?

kostya.g

newbie

Activity: 4

Merit: 0

Hi, im using windows 11 and amd drivers v23.12.1 with rx6700xt

i try to set memory clock 1600mhz, but when miner start it stays 1988mhz. Fans have same problem, i set like it says in documentation, but cards ignore this settings. Core clock and power limits works fine.

Quote

teamredminer.exe -a kawpow -o stratum+tcp://cn.kawpow.k1pool.com:5100 -u KrbB9.%COMPUTERNAME% -p x --clk_core_mhz=1800,1800,1800,1800,1800,1800,1800,1800 --clk_core_mv=880,880,880,880,880,880,880,880 --clk_mem_mhz=1600,1600,1600,1600,1600,1600,1600,1600 --fan_default_big_navi=55::::20:80 --fan_debug --log_file=%HOMEPATH%\Desktop\logs\trm-%date%.log

Quote

[2023-12-17 06:51:09] Mining kawpow with 8 GPU workers
[2023-12-17 06:51:09] GPU PCIe CUs CoreMHz SocMHz MemMHz TEdge TJct TMem FanPct FanRpm VDDC Power Prog Cfg
[2023-12-17 06:51:09] 0 03:00.0 40 1711 0 1988 72C 81C 0C 23.00% 779 887 mV 139 W B640
[2023-12-17 06:51:09] 1 06:00.0 40 1715 0 1988 70C 81C 0C 24.00% 810 887 mV 136 W B640
[2023-12-17 06:51:09] 2 10:00.0 40 1704 0 1990 71C 78C 0C 29.00% 961 887 mV 140 W B640
[2023-12-17 06:51:09] 3 13:00.0 40 1731 0 1990 72C 77C 0C 23.00% 780 887 mV 137 W B640
[2023-12-17 06:51:09] 4 16:00.0 40 1736 0 1990 71C 78C 0C 27.00% 899 887 mV 136 W B640
[2023-12-17 06:51:09] 5 19:00.0 40 1702 0 1988 66C 85C 0C 33.00% 1119 887 mV 142 W B640
[2023-12-17 06:51:09] 6 22:00.0 40 1707 0 1990 65C 71C 0C 26.00% 871 887 mV 143 W B640
[2023-12-17 06:51:09] 7 25:00.0 40 1724 0 1990 58C 67C 0C 23.00% 779 887 mV 133 W B640

i do something wrong?

Dowper_

member

Activity: 223

Merit: 12

My test with TeamRedMiner on PowBlocks:
5x RX 5700 XT - PowBlocks Hashrate & Profit (TRM 0.10.14) - https://www.youtube.com/watch?v=tRvjWUcs0Vg

Sergey2015

newbie

Activity: 44

Merit: 0

tell me please set up dual mining rvn + zil 3 days mined and rvn mined, but no zil, maybe something is not configured correctly here is an example of a batch file
teamredminer.exe -a kawpow -o stratum+tcp://eu.rvn.k1pool.com:7861 -u K.......1.5700 -p x --zil -o stratum+tcp://eu.zil.k1pool.com:1111 -u K.....1.5700 --p x --zil_end --clk_core_mhz=1575 --clk_core_mv=875 --clk_mem_mhz=1780 --clk_mem_mv=1300 --fan_control=:::60
pause

qwep1

hero member

Activity: 610

Merit: 500

Quote from: fenomenyaa on August 15, 2023, 10:23:14 AM

Pls add dynex Grin

+1

fenomenyaa

jr. member

Activity: 131

Merit: 2

Pls add dynex Grin

Foxy4321

newbie

Activity: 62

Merit: 0

ERGO+RXD+ZIL ? Wink

lijingang

newbie

Activity: 99

Merit: 0

May I ask whether TeamRedMiner can add the function of mining apepe on GPU, please reply if you see it, thank you

New minable pow coin: apepepow (apepe)
Monroe community meme coin, the first privacy meme coin, Monero developers, no pre-mining, no ICO, fair mining, let apepepow make pepe again
Algorithm: memehash
Web site: https://apepepow.com
Blocks the browser: https://scan.apepepow.com
Mining Pool:: https://ekapool.com/apepe/
bitcointalk:https://bitcointalk.org/index.php?topic=5455236.0
Discord: https://discord.gg/s5ZgwcnGzT
github:https://github.com/APEPEPOW/APEPEPOW
cpuminer-memehash:https://github.com/APEPEPOW/cpuminer-memehash

Hello everyone! I recently discovered a new interesting project (apepepow) that claims to be designed for the Monero (XMR) meme enthusiast community, developed by Monero developers. Is anyone interested in this project or has more information?It's an interesting meme coin for the Monero community. I would like to know what people think about this project?

FP91G

legendary

Activity: 1876

Merit: 1138

Team Red Miner v0.10.13

Added support for Ironfish on FPGAs and HiveOS Navi zil GPU clock switching script.

README highlights:

GPU: Added HiveOS Navi zil switch handler script for mem states, add --use_distro_features to enable.
FPGA: Added support for Ironfish algo, see FPGA_IRONFISH_GUIDE.txt
FPGA: Added new auto error-rate clock adjustment, see --fpga_er_auto and FPGA_IRONFISH_GUIDE.txt
FPGA: Added support for TUL TH53M board
FPGA: Fixed issue with DNAs being read from wrong SLR on vu9p/vu13p boards.

https://github.com/todxx/teamredminer/releases/tag/v0.10.13
Check all links with this post from the developer.

IronFish can now be fished with FPGA

FP91G

legendary

Activity: 1876

Merit: 1138

Team Red Miner v0.10.11

This is a small update for ironfish mining with slightly better hashrate/efficiency for all gpus but the 7900XT which was broken in the previous release and now does +150-170%. Miners now also have the ability to choose your own graffiti (limited to 20 characters) - if you're the one who finds a block for your pool, you'll get your message on the blockchain!

README highlights:

GPU: Small improvements for ironfish hashrate/efficiency on all gpus.
GPU: Fixed low ironfish hashrate for RDNA3 / 7900XT.
GPU: Automatic handling of ironfish worker name when specified as wallet.worker.
GPU: User can now set their own graffiti prefix (max 20 chars) when mining ironfish (see --iron_user_graffiti) to paint the blockchain!

https://github.com/todxx/teamredminer/releases/tag/v0.10.11
Check all links with this post from the developer.

Ironfish on 6600XT

zsoca72

newbie

Activity: 14

Merit: 0

Hello!
I cant mine Etc nor Eth with my Vega64. Trm v0.10.9-win Got message:

[2023-04-20 13:53:18] GPU 1 DAG allocation trying 8176.0 - 512.0 = 7664.0 MiB.
[2023-04-20 13:53:18] GPU 1 ERROR - failed to allocate ethash DAG buffer, tried down to 4088.0MiB.
[2023-04-20 13:53:18] GPU 1 thread exiting with error.

Under Phoenix miner I can mine Eth without problem.

I have enough Virtual memory, 60 GB (PM worked with 40GB, too).
I tried even to disable/enable my Gpu's, but nothing helped.

todxx

member

Activity: 176

Merit: 76

Team Red Miner v0.10.10 released!

https://github.com/todxx/teamredminer/releases

This release primarily adds support for Ironfish using the stratum protocol proposed by TRM, which enables miners to run at a much higher hashrate than previously.

Confirmed pools with support at this time are Herominers and Flexpool. Other pools are welcome to inspect the forked ironfish on Kerney666's github (trm_stratum branch) to implement support.

README highlights:

GPU: Added support for ironfish (-a ironfish, only the fast stratum protocol v2 supported).
GPU: Dual mining support for ironfish with ERG and ethash (use --iron ... --iron_end).
GPU: Addressed sluggish and lagging display with KAS solo mining (and ironfish).
GPU: Added support for the ZIL ZMP protocol. Use zil:// in --zil .. --zil_end or normal pool configs.
GPU: Added event script for calling external scripts on e.g. algo switching, see --event_script.
GPU: Added support for switching between separate clocks/voltages on windows for zil switching.
FPGA: Added kaspa support for JC13s and JCC2F carriers.
FPGA: Added kaspa support for vu13ps on E300 boards.

Did7N

newbie

Activity: 5

Merit: 0

Hello.
I got an error in the miner "Dev pool failed to connect. Mining will proceed at reduced rate while not connected to dev pool.".
There are no problems with the Internet.
Help me please.

Dowper_

member

Activity: 223

Merit: 12

My tests on Kaspa under HiveOS with Navi RX 5700 XT and Polaris RX 580 4GB gpus:

5x RX 5700 XT - Kaspa Hashrate & Profit (Team Red Miner 0.10.9) - https://www.youtube.com/watch?v=jTsgvmy0hGA
6x RX 580 4GB - Kaspa Hashrate & Profit (Team Red Miner 0.10.9) - https://www.youtube.com/watch?v=_qrFxS1hZ-g

Also Dual Kaspa + Dynex:

5x RX 5700 XT - Dual Kaspa+Dynex Hashrate (TRM 0.10.9 + SRB 2.2.4) - https://www.youtube.com/watch?v=7G3P7nB51TY

smilodon

member

Activity: 127

Merit: 10

Quote from: botros on March 24, 2023, 09:29:52 AM

hello there all miners
anyy suggestiuon on this error ?

i can mine ETC normally on TeamREd ,, but on ravin i get this message

my cards R 470 4G Nitro pluse ,, and i was over clocking , but tried on the default factory Bios too .

any ideas why this message appear and miner can,t mine ?

??

https://ibb.co/Bcd44Gj

the graphics card memory is not enough for rvn mining because the dag file size has increased.. windows 10 takes up a large part of the graphics memory. maybe you can still mine with linux for a while but it won't last enough for 4gb cards

botros

newbie

Activity: 31

Merit: 0

hello there all miners
anyy suggestiuon on this error ?

i can mine ETC normally on TeamREd ,, but on ravin i get this message

my cards R 470 4G Nitro pluse ,, and i was over clocking , but tried on the default factory Bios too .

any ideas why this message appear and miner can,t mine ? https://ibb.co/Bcd44Gj??

https://ibb.co/Bcd44Gj

deedeeranged

member

Activity: 325

Merit: 42

Quote from: batsonxl on March 20, 2023, 11:26:44 PM

Quote from: deedeeranged on March 20, 2023, 05:19:38 AM

Quote from: batsonxl on March 18, 2023, 12:12:49 PM

I asked so mamy times add sock5 but response from dev.i will never use this miner if i hadnt rx5700s.only teamredminer gives 24mhs on kawpow algo. Other miner i dont know gives 11-12mhs. In my place it is blocked so teamred gives me message mining at reduced speed because dev pool no connected.ofcourse it is not connected because it is blocked. Add sock5 to this im tired of asking it. Proxyfier not working im adding miner but it is not connecting.

IIRC SRBMiner-MULTI and XMRig support sock5 and kawpow.

Yes they have socks5 but they give speed 11mhs for rx5700

Only thing I can think of is OC settings or driver issues. You're experienced enough to run miners as Administrator.

Regretfully I cannot help any further as I use Debian testing (bookworm) with amdgpu driver 22.20.50200 and haven't been mining since last year october as I have to pay €0.72 p.kW at the moment (household rate) which is a bummer.

Have a look at KiwiCryptoMiner https://www.youtube.com/@KiwiCryptoMiner/videos although he does his mining on HiveOS and tests various miners.

batsonxl

member

Activity: 1208

Merit: 27

Quote from: deedeeranged on March 20, 2023, 05:19:38 AM

Quote from: batsonxl on March 18, 2023, 12:12:49 PM

I asked so mamy times add sock5 but response from dev.i will never use this miner if i hadnt rx5700s.only teamredminer gives 24mhs on kawpow algo. Other miner i dont know gives 11-12mhs. In my place it is blocked so teamred gives me message mining at reduced speed because dev pool no connected.ofcourse it is not connected because it is blocked. Add sock5 to this im tired of asking it. Proxyfier not working im adding miner but it is not connecting.

IIRC SRBMiner-MULTI and XMRig support sock5 and kawpow.

Yes they have socks5 but they give speed 11mhs for rx5700

deedeeranged

member

Activity: 325

Merit: 42

Quote from: batsonxl on March 18, 2023, 12:12:49 PM

I asked so mamy times add sock5 but response from dev.i will never use this miner if i hadnt rx5700s.only teamredminer gives 24mhs on kawpow algo. Other miner i dont know gives 11-12mhs. In my place it is blocked so teamred gives me message mining at reduced speed because dev pool no connected.ofcourse it is not connected because it is blocked. Add sock5 to this im tired of asking it. Proxyfier not working im adding miner but it is not connecting.

IIRC SRBMiner-MULTI and XMRig support sock5 and kawpow.

Topic: [ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More - page 2. (Read 211969 times)