Topic: [ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More - page 3. (Read 211852 times)
March 18, 2023, 12:12:49 PM
I asked so mamy times add sock5 but response from dev.i will never use this miner if i hadnt rx5700s.only teamredminer gives 24mhs on kawpow algo. Other miner i dont know gives 11-12mhs. In my place it is blocked so teamred gives me message mining at reduced speed because dev pool no connected.ofcourse it is not connected because it is blocked. Add sock5 to this im tired of asking it. Proxyfier not working im adding miner but it is not connecting.
March 17, 2023, 03:21:49 AM
Dear team, please consider adding a mining algorithm, now many miners are mining this Coin，thanks ！
https://miningpoolstats.stream/dynexcoin
https://github.com/dynexcoin/Dynex/releases/tag/DynexSolve-v225
https://miningpoolstats.stream/dynexcoin
https://github.com/dynexcoin/Dynex/releases/tag/DynexSolve-v225
February 15, 2023, 06:06:11 AM
Team Red Miner v0.10.9
This release primarily adds initial support for RDNA3 GPUs and some new FPGA parts/boards.
README highlights:
GPU: Added support for RDNA3 / 7900XT gpus (ethash, autolykos2, kaspa, verthash incl dual combos supported).
FPGA: Added support for JC33s and JC35s on JCC2Ls
FPGA: Added support for E300 with vu33p, vu33p_CIV, vu35p, and vu9p parts.
FPGA: Added support for Alveo U200 active cooled variant.
https://github.com/todxx/teamredminer/releases/tag/v0.10.9
Check all links with this post from the developer.
https://bitcointalksearch.org/topic/m.47411958
This release primarily adds initial support for RDNA3 GPUs and some new FPGA parts/boards.
README highlights:
GPU: Added support for RDNA3 / 7900XT gpus (ethash, autolykos2, kaspa, verthash incl dual combos supported).
FPGA: Added support for JC33s and JC35s on JCC2Ls
FPGA: Added support for E300 with vu33p, vu33p_CIV, vu35p, and vu9p parts.
FPGA: Added support for Alveo U200 active cooled variant.
https://github.com/todxx/teamredminer/releases/tag/v0.10.9
Check all links with this post from the developer.
https://bitcointalksearch.org/topic/m.47411958
February 06, 2023, 10:02:09 PM
Thanks.
VTC + Something please.
Ex: VTC+KASPA
VTC+ERGO
VTC + Something please.
Ex: VTC+KASPA
VTC+ERGO
January 28, 2023, 07:01:38 AM
Team Red Miner v0.10.8
GPU: Kawpow on Polaris 4GB gpus extended to epoch 369 (end of April 2023).
GPU: Tiny Kaspa gpu hashrate boost across all gpus (+0.1%).
GPU: Added triple ERG+KAS+ZIL and ETH+KAS+ZIL mining support, add both --kas and --zil sections to enable.
GPU: R-mode support in dual/triple ZIL mining. Specify --eth_config=R inside --zil ... --zil_end to enable.
GPU: Fixed HiveOS ERG+KAS issues with stray hw errs reported on RDNA2 gpus.
GPU: Fixed additional small issues with dual zil mining paired with older algos.
GPU: Fixed hw err issues for verthash when running with R-mode kernel params.
https://github.com/todxx/teamredminer/releases/tag/v0.10.8
Check all links with this post from the developer.
https://bitcointalksearch.org/topic/m.47411958
GPU: Kawpow on Polaris 4GB gpus extended to epoch 369 (end of April 2023).
GPU: Tiny Kaspa gpu hashrate boost across all gpus (+0.1%).
GPU: Added triple ERG+KAS+ZIL and ETH+KAS+ZIL mining support, add both --kas and --zil sections to enable.
GPU: R-mode support in dual/triple ZIL mining. Specify --eth_config=R inside --zil ... --zil_end to enable.
GPU: Fixed HiveOS ERG+KAS issues with stray hw errs reported on RDNA2 gpus.
GPU: Fixed additional small issues with dual zil mining paired with older algos.
GPU: Fixed hw err issues for verthash when running with R-mode kernel params.
https://github.com/todxx/teamredminer/releases/tag/v0.10.8
Check all links with this post from the developer.
https://bitcointalksearch.org/topic/m.47411958
January 28, 2023, 03:51:24 AM
There is 2 bugs trm needs to fix.
1. Add sock5 support otherwise it is keep sayin dev pool failed to connect.option given in read me file dont work.
2.when mining kawpow algo on win10 with rx5700xt it crashes if you wake up screen. Monitor connected thru onboard vga. If you dont touch it it keeps mining without crash.
1. Add sock5 support otherwise it is keep sayin dev pool failed to connect.option given in read me file dont work.
2.when mining kawpow algo on win10 with rx5700xt it crashes if you wake up screen. Monitor connected thru onboard vga. If you dont touch it it keeps mining without crash.
December 28, 2022, 06:01:30 AM
Team Red Miner v0.10.7
This release primarily adds dual mining of Ergo+Kaspa on gpus, and adds voltage control support on SQRL FK33 and TUL TH53/55 fpgas.
README highlights:
GPU: Added dual ERG+KAS mining support for all supported gpus (see DUAL_ERGO_MINING.txt).
GPU: Fixed semi-broken dual zil mining for older algos (Nimiq, Argon2, x16r, and others).
FPGA: Added support for running higher than 700MHz on Kaspa.
FPGA: Added voltage control for TH53, TH55, and FK33.
FPGA: Added support for Kaspa on VCU1525 and Aleo U200 boards.
FPGA: Possible fix for crashes after network outage when mining Kaspa.
FPGA: Added description of FK33 voltage mod, see FPGA_FK33_MOD.txt.
https://github.com/todxx/teamredminer/releases/tag/v0.10.7
Check all links with this post from the developer.
https://bitcointalksearch.org/topic/m.47411958
This release primarily adds dual mining of Ergo+Kaspa on gpus, and adds voltage control support on SQRL FK33 and TUL TH53/55 fpgas.
README highlights:
GPU: Added dual ERG+KAS mining support for all supported gpus (see DUAL_ERGO_MINING.txt).
GPU: Fixed semi-broken dual zil mining for older algos (Nimiq, Argon2, x16r, and others).
FPGA: Added support for running higher than 700MHz on Kaspa.
FPGA: Added voltage control for TH53, TH55, and FK33.
FPGA: Added support for Kaspa on VCU1525 and Aleo U200 boards.
FPGA: Possible fix for crashes after network outage when mining Kaspa.
FPGA: Added description of FK33 voltage mod, see FPGA_FK33_MOD.txt.
https://github.com/todxx/teamredminer/releases/tag/v0.10.7
Check all links with this post from the developer.
https://bitcointalksearch.org/topic/m.47411958
December 18, 2022, 01:37:18 PM
Anyone can help please???such a nice miner but no proxy support.please add this future
You could try SRBMiner-Multi as it capable of mining via socks5 AFAIK.
December 14, 2022, 01:40:44 PM
Anyone can help please???such a nice miner but no proxy support.please add this future
You could try SRBMiner-Multi as it capable of mining via socks5 AFAIK.
December 14, 2022, 10:09:25 AM
Anyone can help please???such a nice miner but no proxy support.please add this future
December 03, 2022, 11:43:09 AM
Does trm has socks5 support?
December 01, 2022, 04:15:26 AM
I switched for the first time today from Phoenixminer to TeamRedMiner. I have 5700XTs but I only get 54 Mh/s with TeamRedMiner vs 55.5 Mh/s when using Phoenixminer.
I guess I am missing some comandline options??? ... I am running HiveOS.
I guess I am missing some comandline options??? ... I am running HiveOS.
No you are not missing options. PhoenixMiner is AFIAK the only one who can control the mclock, cclock and so on linux from the command line. TRM does not offer those command line optionsto control the clocks on linux and probably relies on HiveOS tricks to do so.
I don't use HiveOS as I mine with Debian testing/bookworm
It would be nice if TRM made it possible to set the command line options for the clocks and so on linux.
If you have no compelling reason to change miner, beside mining a coin PhoenixMiner does not support, stick to it.
November 30, 2022, 05:09:34 AM
I switched for the first time today from Phoenixminer to TeamRedMiner. I have 5700XTs but I only get 54 Mh/s with TeamRedMiner vs 55.5 Mh/s when using Phoenixminer.
I guess I am missing some comandline options??? ... I am running HiveOS.
I guess I am missing some comandline options??? ... I am running HiveOS.
November 20, 2022, 05:45:16 AM
@Todxx do you respond to github issues?
November 16, 2022, 07:58:05 AM
add EVRPROGPOW algo please!!!
November 16, 2022, 02:06:24 AM
Try to mine with only one GPU at a time, until you found the faulty one.
This method will take too much time, because failure appears every 6-10 hours. I hope there are easier and shorter diagnostics.https://docs.amd.com/bundle/ROCm-Release-Notes-v5.2/page/Known_Issues_in_This_Release.html
The first opinion is that this is a software error. The fastest diagnostics is the launch of another miner for a day. If other errors occur, then you need to check the power supply, the raiser and reduce the overclocking of video cards.
November 15, 2022, 07:05:34 PM
ergo+kas dual please. 
November 12, 2022, 10:54:04 AM
Try to mine with only one GPU at a time, until you found the faulty one.
This method will take too much time, because failure appears every 6-10 hours. I hope there are easier and shorter diagnostics. November 12, 2022, 10:31:38 AM
Try to mine with only one GPU at a time, until you found the faulty one.
November 12, 2022, 10:22:12 AM
Yo, guyz!
TRM 0.10.5.1
Periodically i get "Miner restarted after error" with this log record:
:0:rocdevice.cpp :2614: 44323066915 us: 1820 : [tid:0x7efbff96a700] Device::callbackQueue aborting with error : HSA_STATUS_ERROR_MEMORY_FAULT: Agent attempted to access an inaccessible address. code: 0x2b
Aborted
Based on this entry, how to understand which card is causing the failure?
Thanks in advance!
TRM 0.10.5.1
Periodically i get "Miner restarted after error" with this log record:
:0:rocdevice.cpp :2614: 44323066915 us: 1820 : [tid:0x7efbff96a700] Device::callbackQueue aborting with error : HSA_STATUS_ERROR_MEMORY_FAULT: Agent attempted to access an inaccessible address. code: 0x2b
Aborted
Based on this entry, how to understand which card is causing the failure?
Thanks in advance!
Jump to: