Topic: ANN [XC] Privacy Based Smart Chain with Automated Build System - page 2. (Read 130172 times)
January 24, 2018, 10:01:09 AM
Buying XC OTC, pm me
January 22, 2018, 06:17:14 AM
Yes the old chain is still active so anyone with old XC can claim their coin.
Nova has updated their wallet and its safe to withdraw.
Nova has updated their wallet and its safe to withdraw.
January 21, 2018, 04:21:26 PM
A swap to new wallet.
Releases : https://github.com/XCurrency/xc/releases
1 - backup wallet.dat
2 - copy wallet.dat into new xc3 data directory
3 - run xc3, you will receive a warning about keys
4 - check to see if you have the privatekeys from old wallet
If you get this message :
"Warning: error reading wallet.dat! All keys read correctly,
but transaction data or address book entries might be missing or incorrect."
then your allset, if you get :
"wallet.dat corrupt salvage failed"
Use command dumpprivkey adressname in the old XC wallet to get the private key.
Use importprivkey with that key in the new XC wallet.
Explorer : https://chainz.cryptoid.info/xc/#
Old : https://chainz.cryptoid.info/xc2/
If you need the old wallet :
Linux : https://github.com/atcsecure/XC2
Windows : https://mega.nz/#!lDQ2yCYK!73s7J4JPwsjxfaPjqd0b25aoE2M7oR7feqoetqz9UJM
Mac : https://mega.nz/#!VDgBEa5K!4cq0KP94NEkeVwnamsedR7UJM8x1pt6yEk6QuK_edfc
Snapshot : https://mega.nz/#!oS51RQrR!FNDN_j2spU1a3hBChKIx0JHU3MVDKDbjuYOJECaW_jI
Use these instructions to setup your servicenode. 5000XC needed.
https://github.com/BlocknetDX/blocknet-docs/blob/master/blocknetDXservice-node.md
Use port 14333 instead for XC.
Releases : https://github.com/XCurrency/xc/releases
1 - backup wallet.dat
2 - copy wallet.dat into new xc3 data directory
3 - run xc3, you will receive a warning about keys
4 - check to see if you have the privatekeys from old wallet
If you get this message :
"Warning: error reading wallet.dat! All keys read correctly,
but transaction data or address book entries might be missing or incorrect."
then your allset, if you get :
"wallet.dat corrupt salvage failed"
Use command dumpprivkey adressname in the old XC wallet to get the private key.
Use importprivkey with that key in the new XC wallet.
Explorer : https://chainz.cryptoid.info/xc/#
Old : https://chainz.cryptoid.info/xc2/
If you need the old wallet :
Linux : https://github.com/atcsecure/XC2
Windows : https://mega.nz/#!lDQ2yCYK!73s7J4JPwsjxfaPjqd0b25aoE2M7oR7feqoetqz9UJM
Mac : https://mega.nz/#!VDgBEa5K!4cq0KP94NEkeVwnamsedR7UJM8x1pt6yEk6QuK_edfc
Snapshot : https://mega.nz/#!oS51RQrR!FNDN_j2spU1a3hBChKIx0JHU3MVDKDbjuYOJECaW_jI
Use these instructions to setup your servicenode. 5000XC needed.
https://github.com/BlocknetDX/blocknet-docs/blob/master/blocknetDXservice-node.md
Use port 14333 instead for XC.
So are there two chains right now? Which one is novaexchange on??
January 20, 2018, 11:15:57 AM
I have collected required number of coins couple of days ago on novaexchange in dip, to run node. I am still waiting for the road to be cleared for XC but reason of staying fully strong is side project of the developer where he is busy. Once that is done this one is going to skies.
January 19, 2018, 10:28:48 AM
Is there a MAC version of the wallet?
Mac version : https://github.com/XCurrency/xc/releases/download/v3.0.04/xcurrency-3.0.04-osx-unsigned.dmg
XC3 explorer online : https://chainz.cryptoid.info/xc3/
it's swap or hardfork ?
A swap to new wallet.
Releases : https://github.com/XCurrency/xc/releases
1 - backup wallet.dat
2 - copy wallet.dat into new xc3 data directory
3 - run xc3, you will receive a warning about keys
4 - check to see if you have the privatekeys from old wallet
If you get this message :
"Warning: error reading wallet.dat! All keys read correctly,
but transaction data or address book entries might be missing or incorrect."
then your allset, if you get :
"wallet.dat corrupt salvage failed"
Use command dumpprivkey adressname in the old XC wallet to get the private key.
Use importprivkey with that key in the new XC wallet.
Explorer : https://chainz.cryptoid.info/xc/#
Old : https://chainz.cryptoid.info/xc2/
If you need the old wallet :
Linux : https://github.com/atcsecure/XC2
Windows : https://mega.nz/#!lDQ2yCYK!73s7J4JPwsjxfaPjqd0b25aoE2M7oR7feqoetqz9UJM
Mac : https://mega.nz/#!VDgBEa5K!4cq0KP94NEkeVwnamsedR7UJM8x1pt6yEk6QuK_edfc
Snapshot : https://mega.nz/#!oS51RQrR!FNDN_j2spU1a3hBChKIx0JHU3MVDKDbjuYOJECaW_jI
Use these instructions to setup your servicenode. 5000XC needed.
https://github.com/BlocknetDX/blocknet-docs/blob/master/blocknetDXservice-node.md
Use port 14333 instead for XC.
January 19, 2018, 10:09:03 AM
Is there a MAC version of the wallet?
Mac version : https://github.com/XCurrency/xc/releases/download/v3.0.04/xcurrency-3.0.04-osx-unsigned.dmg
XC3 explorer online : https://chainz.cryptoid.info/xc3/
it's swap or hardfork ?
January 18, 2018, 10:05:30 AM
Is there a MAC version of the wallet?
Mac version : https://github.com/XCurrency/xc/releases/download/v3.0.04/xcurrency-3.0.04-osx-unsigned.dmg
XC3 explorer online : https://chainz.cryptoid.info/xc3/
January 18, 2018, 09:05:32 AM
Is there a MAC version of the wallet?
January 18, 2018, 06:04:07 AM
Follow instructions download wallet : https://github.com/XCurrency/xc/releases
Windows version is done rest will follow.
There wont be any funds until the swap is complete tomorrow.
1 - backup wallet.dat
2 - copy wallet.dat into new xc3 data directory
3 - run xc3, you will receive a warning about keys
4 - check to see if you have the privatekeys from old wallet
balances will be zero until after the swap tomorrow 0800 EST.
If you get this message :
"Warning: error reading wallet.dat! All keys read correctly,
but transaction data or address book entries might be missing or incorrect."
then your allset, if you get :
"wallet.dat corrupt salvage failed"
Use command dumpprivkey adressname in the old XC wallet to get the private key.
Use importprivkey with that key in the new XC wallet.
Check your recieve adress in file-recieve adress menu.
Or use command listreceivedbyaddress 0 true.
Verify adress : https://chainz.cryptoid.info/xc/#
Windows version is done rest will follow.
There wont be any funds until the swap is complete tomorrow.
1 - backup wallet.dat
2 - copy wallet.dat into new xc3 data directory
3 - run xc3, you will receive a warning about keys
4 - check to see if you have the privatekeys from old wallet
balances will be zero until after the swap tomorrow 0800 EST.
If you get this message :
"Warning: error reading wallet.dat! All keys read correctly,
but transaction data or address book entries might be missing or incorrect."
then your allset, if you get :
"wallet.dat corrupt salvage failed"
Use command dumpprivkey adressname in the old XC wallet to get the private key.
Use importprivkey with that key in the new XC wallet.
Check your recieve adress in file-recieve adress menu.
Or use command listreceivedbyaddress 0 true.
Verify adress : https://chainz.cryptoid.info/xc/#
Also when I check my adress through https://chainz.cryptoid.info/xc/# , I see a balance of 0
This while I currently have about 4000 XC in my old wallet.
Is there an explanation for this ?
Im not sure someone had same issue waiting for answer...
Ok, cool. If that's in Slack btw then that's me as well
Will probably be the new chain in the explorer and balance will appear after swap.
That's what I'm hoping for at least
January 18, 2018, 05:38:28 AM
Follow instructions download wallet : https://github.com/XCurrency/xc/releases
Windows version is done rest will follow.
There wont be any funds until the swap is complete tomorrow.
1 - backup wallet.dat
2 - copy wallet.dat into new xc3 data directory
3 - run xc3, you will receive a warning about keys
4 - check to see if you have the privatekeys from old wallet
balances will be zero until after the swap tomorrow 0800 EST.
If you get this message :
"Warning: error reading wallet.dat! All keys read correctly,
but transaction data or address book entries might be missing or incorrect."
then your allset, if you get :
"wallet.dat corrupt salvage failed"
Use command dumpprivkey adressname in the old XC wallet to get the private key.
Use importprivkey with that key in the new XC wallet.
Check your recieve adress in file-recieve adress menu.
Or use command listreceivedbyaddress 0 true.
Verify adress : https://chainz.cryptoid.info/xc/#
Windows version is done rest will follow.
There wont be any funds until the swap is complete tomorrow.
1 - backup wallet.dat
2 - copy wallet.dat into new xc3 data directory
3 - run xc3, you will receive a warning about keys
4 - check to see if you have the privatekeys from old wallet
balances will be zero until after the swap tomorrow 0800 EST.
If you get this message :
"Warning: error reading wallet.dat! All keys read correctly,
but transaction data or address book entries might be missing or incorrect."
then your allset, if you get :
"wallet.dat corrupt salvage failed"
Use command dumpprivkey adressname in the old XC wallet to get the private key.
Use importprivkey with that key in the new XC wallet.
Check your recieve adress in file-recieve adress menu.
Or use command listreceivedbyaddress 0 true.
Verify adress : https://chainz.cryptoid.info/xc/#
Also when I check my adress through https://chainz.cryptoid.info/xc/# , I see a balance of 0
This while I currently have about 4000 XC in my old wallet.
Is there an explanation for this ?
Im not sure someone had same issue waiting for answer...
January 18, 2018, 05:33:06 AM
It was very surprising for me to see XCurrency has been removed from coinmarketcap. I went there to get information about existing markets to check what is going on but it isn't anymore there. I understand it was planned to be rebranded but thread is silent for this thing for quite some time.
January 18, 2018, 05:32:47 AM
Follow instructions download wallet : https://github.com/XCurrency/xc/releases
Windows version is done rest will follow.
There wont be any funds until the swap is complete tomorrow.
1 - backup wallet.dat
2 - copy wallet.dat into new xc3 data directory
3 - run xc3, you will receive a warning about keys
4 - check to see if you have the privatekeys from old wallet
balances will be zero until after the swap tomorrow 0800 EST.
If you get this message :
"Warning: error reading wallet.dat! All keys read correctly,
but transaction data or address book entries might be missing or incorrect."
then your allset, if you get :
"wallet.dat corrupt salvage failed"
Use command dumpprivkey adressname in the old XC wallet to get the private key.
Use importprivkey with that key in the new XC wallet.
Check your recieve adress in file-recieve adress menu.
Or use command listreceivedbyaddress 0 true.
Verify adress : https://chainz.cryptoid.info/xc/#
Windows version is done rest will follow.
There wont be any funds until the swap is complete tomorrow.
1 - backup wallet.dat
2 - copy wallet.dat into new xc3 data directory
3 - run xc3, you will receive a warning about keys
4 - check to see if you have the privatekeys from old wallet
balances will be zero until after the swap tomorrow 0800 EST.
If you get this message :
"Warning: error reading wallet.dat! All keys read correctly,
but transaction data or address book entries might be missing or incorrect."
then your allset, if you get :
"wallet.dat corrupt salvage failed"
Use command dumpprivkey adressname in the old XC wallet to get the private key.
Use importprivkey with that key in the new XC wallet.
Check your recieve adress in file-recieve adress menu.
Or use command listreceivedbyaddress 0 true.
Verify adress : https://chainz.cryptoid.info/xc/#
Also when I check my adress through https://chainz.cryptoid.info/xc/# , I see a balance of 0
This while I currently have about 4000 XC in my old wallet.
Is there an explanation for this ?
January 18, 2018, 05:24:53 AM
Follow instructions download wallet : https://github.com/XCurrency/xc/releases
Windows version is done rest will follow.
There wont be any funds until the swap is complete tomorrow.
1 - backup wallet.dat
2 - copy wallet.dat into new xc3 data directory
3 - run xc3, you will receive a warning about keys
4 - check to see if you have the privatekeys from old wallet
balances will be zero until after the swap tomorrow 0800 EST.
If you get this message :
"Warning: error reading wallet.dat! All keys read correctly,
but transaction data or address book entries might be missing or incorrect."
then your allset, if you get :
"wallet.dat corrupt salvage failed"
Use command dumpprivkey adressname in the old XC wallet to get the private key.
Use importprivkey with that key in the new XC wallet.
Check your recieve adress in file-recieve adress menu.
Or use command listreceivedbyaddress 0 true.
Verify adress : https://chainz.cryptoid.info/xc/#
Windows version is done rest will follow.
There wont be any funds until the swap is complete tomorrow.
1 - backup wallet.dat
2 - copy wallet.dat into new xc3 data directory
3 - run xc3, you will receive a warning about keys
4 - check to see if you have the privatekeys from old wallet
balances will be zero until after the swap tomorrow 0800 EST.
If you get this message :
"Warning: error reading wallet.dat! All keys read correctly,
but transaction data or address book entries might be missing or incorrect."
then your allset, if you get :
"wallet.dat corrupt salvage failed"
Use command dumpprivkey adressname in the old XC wallet to get the private key.
Use importprivkey with that key in the new XC wallet.
Check your recieve adress in file-recieve adress menu.
Or use command listreceivedbyaddress 0 true.
Verify adress : https://chainz.cryptoid.info/xc/#
Thanks m8 ! Looks like I'm all set.
Only thing I don't understand is your remark to check the receive adress.
Do I need to generate a new receive adress from the XC3 wallet ?
Or can I still use my old receive adress ?
And how can I verify this adress ?
January 17, 2018, 11:39:39 AM
Follow instructions download wallet : https://github.com/XCurrency/xc/releases
Windows version is done rest will follow.
There wont be any funds until the swap is complete tomorrow.
1 - backup wallet.dat
2 - copy wallet.dat into new xc3 data directory
3 - run xc3, you will receive a warning about keys
4 - check to see if you have the privatekeys from old wallet
balances will be zero until after the swap tomorrow 0800 EST.
If you get this message :
"Warning: error reading wallet.dat! All keys read correctly,
but transaction data or address book entries might be missing or incorrect."
then your allset, if you get :
"wallet.dat corrupt salvage failed"
Use command dumpprivkey adressname in the old XC wallet to get the private key.
Use importprivkey with that key in the new XC wallet.
Check your recieve adress in file-recieve adress menu.
Or use command listreceivedbyaddress 0 true.
Verify adress : https://chainz.cryptoid.info/xc/#
Windows version is done rest will follow.
There wont be any funds until the swap is complete tomorrow.
1 - backup wallet.dat
2 - copy wallet.dat into new xc3 data directory
3 - run xc3, you will receive a warning about keys
4 - check to see if you have the privatekeys from old wallet
balances will be zero until after the swap tomorrow 0800 EST.
If you get this message :
"Warning: error reading wallet.dat! All keys read correctly,
but transaction data or address book entries might be missing or incorrect."
then your allset, if you get :
"wallet.dat corrupt salvage failed"
Use command dumpprivkey adressname in the old XC wallet to get the private key.
Use importprivkey with that key in the new XC wallet.
Check your recieve adress in file-recieve adress menu.
Or use command listreceivedbyaddress 0 true.
Verify adress : https://chainz.cryptoid.info/xc/#
January 17, 2018, 11:16:24 AM
So this is very good news !! Novaexchange not closing their doors after all.
So at least we still have an exchange to buy and sell our XC
Now if only ATCSecure would give us a nice update...
ATCsecure just updated on Slack that the builds are kicking off now, osx, arm, windows and linux will all be posted to the repo shortly
https://github.com/XCurrency/xc
The swap will be started 0800 EST thursday January 18th.
Step by step guide :
1 - backup wallet.dat
2 - copy wallet.dat into new xc3 data directory
3 - run xc3, you will receive a warning about keys
4 - check to see if you have the privatekeys from old wallet
balances will be zero until after the swap
If you get this message :
"Warning: error reading wallet.dat! All keys read correctly,
but transaction data or address book entries might be missing or incorrect."
then your allset, if you get :
"wallet.dat corrupt salvage failed" then you just need export/import your private keys
info on exporting/importing keys will follow.
Join XC Slack : https://xcurrency-slack.herokuapp.com/
how to swap old xc to new xc?
January 17, 2018, 09:49:46 AM
So this is very good news !! Novaexchange not closing their doors after all.
So at least we still have an exchange to buy and sell our XC
Now if only ATCSecure would give us a nice update...
ATCsecure just updated on Slack that the builds are kicking off now, osx, arm, windows and linux will all be posted to the repo shortly
https://github.com/XCurrency/xc/releases
The swap will be started 0800 EST thursday January 18th.
Step by step guide :
1 - backup wallet.dat
2 - copy wallet.dat into new xc3 data directory
3 - run xc3, you will receive a warning about keys
4 - check to see if you have the privatekeys from old wallet
balances will be zero until after the swap
If you get this message :
"Warning: error reading wallet.dat! All keys read correctly,
but transaction data or address book entries might be missing or incorrect."
then your allset, if you get :
"wallet.dat corrupt salvage failed" then you just need export/import your private keys
info on exporting/importing keys will follow.
Join XC Slack : https://xcurrency-slack.herokuapp.com/
January 16, 2018, 10:42:52 AM
So this is very good news !! Novaexchange not closing their doors after all.
So at least we still have an exchange to buy and sell our XC
Now if only ATCSecure would give us a nice update...
January 15, 2018, 05:53:07 AM
January 12, 2018, 07:53:03 PM
is it been listed on a exchange?
January 12, 2018, 06:19:15 PM
Hey all, I had used the latest wallet in the summer to sync and stake without probs, what further actions need I take apart from downloading new wallet when its out and using old wallet dat? Thank you.
You are ready
Jump to: