[ANN] [XEMP] | [16M coins] | [EmpoCredits] | Backed by EmpoEX | 1 click MNodes. - page 12.

TonySon

sr. member

Activity: 396

Merit: 250

Welcome to The XEMP Faucet!

You can get up to (1 -10) XEMP
reward every 24 hours.

Please donate to keep this faucet running.

Donate XEMP

:

S7Gm5AV8APbJhVkQPPZV8mey7FxnXo8usU

Free XEMP Faucet!
* Minimal payout: 1 XEMP *
(Within the next 24 hours)

XEMP Faucet is funded solely by Members of EmpoCredits Community.

Please be aware:

General Information:
- Please make sure you enter your correct XEMP wallet address. We do not take responsibility for incorrect addresses being used for this faucet.

- We reserve the right to increase or decrease the payout amounts whenever we like. This is also to ensure a constant supply of XEMP.

WalletAddress:
- Wallets are not accepted from the same IP within 24 hours.

http://xempfaucet.blogspot.com/

Riseman

hero member

Activity: 690

Merit: 500

Quote from: magaura on September 20, 2015, 06:47:49 AM

The price is rising again..shake out copmpleted? Cheesy

#trollface

I think it's the same bot trading with itself. It just moved its orders higher because there are no "real" orders below 198 sats ATM. If you place a big enough sell order at 100 sats all this "action" will continue below this price.

magaura

legendary

Activity: 1029

Merit: 1000

The price is rising again..shake out copmpleted? Cheesy

#trollface

EmpoEX

sr. member

Activity: 419

Merit: 264

Quote from: dinca030 on September 16, 2015, 01:53:14 PM

constantly fake buy/sell on empoex.com Angry

We would like to let you know that we don't have anything to do with those buy and sell orders.
Users have access to our API, so they can trade faster than other users can trade manually.
If you consider lower fees, those users can trade for almost 0 fee, without having to lose any of their coins

Quote from: Riseman on September 16, 2015, 04:54:30 PM

Quote from: dinca030 on September 16, 2015, 01:53:14 PM

constantly fake buy/sell on empoex.com Angry

Also noticed this. 30-55K newly created orders only, every hour or so. Imitating 1-1.5 BTC daily volume.

Quote from: magaura on September 17, 2015, 04:46:54 AM

I'm not worried..just HODL Cheesy

You don't have to worry about anything. We have been working really hard in those 2 last months. We want to give a long term value to our exchange and XEMP. We do not want to have a pump and dump coin. Everything should work naturally.

Quote from: alexius89 on September 17, 2015, 04:48:52 AM

Quote from: magaura on September 17, 2015, 04:46:54 AM

I'm not worried..just HODL Cheesy

exactly. I'm am not worried at all. Looking forward for more, especially the new platform

Glad to hear that!

magaura

legendary

Activity: 1029

Merit: 1000

totally agree

alexius89

hero member

Activity: 709

Merit: 500

Gridcoin Foundation

Quote from: magaura on September 17, 2015, 04:46:54 AM

I'm not worried..just HODL Cheesy

exactly. I'm am not worried at all. Looking forward for more, especially the new platform

magaura

legendary

Activity: 1029

Merit: 1000

I'm not worried..just HODL Cheesy

Riseman

hero member

Activity: 690

Merit: 500

Quote from: dinca030 on September 16, 2015, 01:53:14 PM

constantly fake buy/sell on empoex.com Angry

Also noticed this. 30-55K newly created orders only, every hour or so. Imitating 1-1.5 BTC daily volume.

dinca030

newbie

Activity: 51

Merit: 0

constantly fake buy/sell on empoex.com Angry

catotune

sr. member

Activity: 422

Merit: 250

Meow

Has anyone successfully created a masternode? I am pretty experienced at creating masternodes, and I have not been able to get one to work for XEMP.

When I try, my node appears on the masternode list for a few minutes, but with the status of 0 and then it disappears. No other masternodes seem to be on the list, ever.

EDIT: I support this coin and am looking forward to checking out EmpoEx as an exchange. I just don't think the masternode functionality of XEMP works. Please let me know if any of you have had any success running a MN on main net.

EmpoEX

sr. member

Activity: 419

Merit: 264

Quote from: alexius89 on September 15, 2015, 12:12:56 AM

Quote from: EmpoEX on September 14, 2015, 05:34:20 AM

Hello, we have been a bit busy with coding.

We were about to start writing a HOWTO setup MasterNode tutorial, but in the mean time we found a few very detailed ones.

All of those tutorials are accurate.

If You are not sure how to setup a masternode, please take a look here:

1) https://bitcointalksearch.org/topic/m.11441576
2) https://bitcointalksearch.org/topic/m.11075558

When you setup you masternode(s), make sure you put "staking=0" in your conf file, so masternodes work correctly.

We did a small update in source/wallet. Please download the new wallet:
https://xemp.empoex.com/ (Get wallet)

Tweet: https://twitter.com/EmpoExchange/status/643406844770263040
Please RT if you use twitter.

Thanks!

Thanks for the update :-) appreciate that. Could you provide some visual on what are you working at the moment,. e.g. screenshots etc.?

Hello, alexius89

We didn't want to reveal anything before we finish BETA. But in this case, we will just show a screenshot. We wont be posting more screenshots.
Hope this will be a nice tease

Keep in mind, we haven't connected our database to the new/BETA platform. All figures are random.
This is BETA and we might do some changes in the future.

https://twitter.com/EmpoExchange/status/643745263182565377

alexius89

hero member

Activity: 709

Merit: 500

Gridcoin Foundation

Quote from: EmpoEX on September 14, 2015, 05:34:20 AM

Hello, we have been a bit busy with coding.

We were about to start writing a HOWTO setup MasterNode tutorial, but in the mean time we found a few very detailed ones.

All of those tutorials are accurate.

If You are not sure how to setup a masternode, please take a look here:

1) https://bitcointalksearch.org/topic/m.11441576
2) https://bitcointalksearch.org/topic/m.11075558

When you setup you masternode(s), make sure you put "staking=0" in your conf file, so masternodes work correctly.

We did a small update in source/wallet. Please download the new wallet:
https://xemp.empoex.com/ (Get wallet)

Tweet: https://twitter.com/EmpoExchange/status/643406844770263040
Please RT if you use twitter.

Thanks!

Thanks for the update :-) appreciate that. Could you provide some visual on what are you working at the moment,. e.g. screenshots etc.?

EmpoEX

sr. member

Activity: 419

Merit: 264

Hello, we have been a bit busy with coding.

We were about to start writing a HOWTO setup MasterNode tutorial, but in the mean time we found a few very detailed ones.

All of those tutorials are accurate.

If You are not sure how to setup a masternode, please take a look here:

1) https://bitcointalksearch.org/topic/m.11441576
2) https://bitcointalksearch.org/topic/m.11075558

When you setup you masternode(s), make sure you put "staking=0" in your conf file, so masternodes work correctly.

We did a small update in source/wallet. Please download the new wallet:
https://xemp.empoex.com/ (Get wallet)

Tweet: https://twitter.com/EmpoExchange/status/643406844770263040
Please RT if you use twitter.

Thanks!

alexius89

hero member

Activity: 709

Merit: 500

Gridcoin Foundation

Quote from: bcboilermaker on September 07, 2015, 10:49:52 AM

Quote from: EmpoEX on September 07, 2015, 07:23:49 AM

Quote from: bcboilermaker on September 07, 2015, 07:12:08 AM

Quote from: EmpoEX on September 07, 2015, 06:16:39 AM

Source has been updated: https://bitbucket.org/EmpoEX/empocredits/src
Wallet has been updated: https://xemp.empoex.com/ (Click on orange icon "Get Wallet")

Make sure you delete all content from your XEMP folder.

PoS will be active at block number 18000, so make sure you run the new wallet version before then! Otherwise your coins will be lost.

Masternode issue has been patched and it's works flawlessly!

Sorry for taking long, but we had to make sure it would work!

Please RT:
https://twitter.com/EmpoExchange/status/640846477514944512

ok, so can I open the old wallet and transfer coins into the exchange?
I'm little confused.
If I let the old wallet sync to 18000 then I lose coins?
how I get coins from old wallet, with out it syncing?

All you need to do right now is run the new wallet

Make sure you delete your old wallet, so you don't run it ever again.

Thanks, is there a tutorial coming out for masternode setup?
I do not know how to get that going

yes there will be a explaining tutorial how the masternodes are working and how to set it up properly.

bcboilermaker

newbie

Activity: 44

Merit: 0

Quote from: EmpoEX on September 07, 2015, 07:23:49 AM

Quote from: bcboilermaker on September 07, 2015, 07:12:08 AM

Quote from: EmpoEX on September 07, 2015, 06:16:39 AM

Source has been updated: https://bitbucket.org/EmpoEX/empocredits/src
Wallet has been updated: https://xemp.empoex.com/ (Click on orange icon "Get Wallet")

Make sure you delete all content from your XEMP folder.

PoS will be active at block number 18000, so make sure you run the new wallet version before then! Otherwise your coins will be lost.

Masternode issue has been patched and it's works flawlessly!

Sorry for taking long, but we had to make sure it would work!

Please RT:
https://twitter.com/EmpoExchange/status/640846477514944512

ok, so can I open the old wallet and transfer coins into the exchange?
I'm little confused.
If I let the old wallet sync to 18000 then I lose coins?
how I get coins from old wallet, with out it syncing?

All you need to do right now is run the new wallet

Make sure you delete your old wallet, so you don't run it ever again.

Thanks, is there a tutorial coming out for masternode setup?
I do not know how to get that going

faciallover

newbie

Activity: 1

Merit: 0

Quote from: rt99 on September 07, 2015, 10:16:42 AM

Just checking on how to run a masternode.
Do I press the create tab, or the create local tab?
Also, do I have to press the start or start all tab for it to work?
Does the masternode start at block 18000 as well, or does it work now?

As far as I know the blocks work now so the masternode wont start at 18000

rt99

full member

Activity: 134

Merit: 100

Just checking on how to run a masternode.
Do I press the create tab, or the create local tab?
Also, do I have to press the start or start all tab for it to work?
Does the masternode start at block 18000 as well, or does it work now?

EmpoEX

sr. member

Activity: 419

Merit: 264

Quote from: bcboilermaker on September 07, 2015, 07:12:08 AM

Quote from: EmpoEX on September 07, 2015, 06:16:39 AM

Source has been updated: https://bitbucket.org/EmpoEX/empocredits/src
Wallet has been updated: https://xemp.empoex.com/ (Click on orange icon "Get Wallet")

Make sure you delete all content from your XEMP folder.

PoS will be active at block number 18000, so make sure you run the new wallet version before then! Otherwise your coins will be lost.

Masternode issue has been patched and it's works flawlessly!

Sorry for taking long, but we had to make sure it would work!

Please RT:
https://twitter.com/EmpoExchange/status/640846477514944512

ok, so can I open the old wallet and transfer coins into the exchange?
I'm little confused.
If I let the old wallet sync to 18000 then I lose coins?
how I get coins from old wallet, with out it syncing?

All you need to do right now is run the new wallet

Make sure you delete your old wallet, so you don't run it ever again.

bcboilermaker

newbie

Activity: 44

Merit: 0

Quote from: EmpoEX on September 07, 2015, 06:16:39 AM

Source has been updated: https://bitbucket.org/EmpoEX/empocredits/src
Wallet has been updated: https://xemp.empoex.com/ (Click on orange icon "Get Wallet")

Make sure you delete all content from your XEMP folder.

PoS will be active at block number 18000, so make sure you run the new wallet version before then! Otherwise your coins will be lost.

Masternode issue has been patched and it's works flawlessly!

Sorry for taking long, but we had to make sure it would work!

Please RT:
https://twitter.com/EmpoExchange/status/640846477514944512

ok, so can I open the old wallet and transfer coins into the exchange?
I'm little confused.
If I let the old wallet sync to 18000 then I lose coins?
how I get coins from old wallet, with out it syncing?

EmpoEX

sr. member

Activity: 419

Merit: 264

Source has been updated: https://bitbucket.org/EmpoEX/empocredits/src
Wallet has been updated: https://xemp.empoex.com/ (Click on orange icon "Get Wallet")

Make sure you delete all content from your XEMP folder.

PoS will be active at block number 18000, so make sure you run the new wallet version before then! Otherwise your coins will be lost.

Masternode issue has been patched and it's works flawlessly!

Sorry for taking long, but we had to make sure it would work!

Please RT:
https://twitter.com/EmpoExchange/status/640846477514944512

Topic: [ANN] [XEMP] | [16M coins] | [EmpoCredits] | Backed by EmpoEX | 1 click MNodes. - page 12. (Read 39414 times)