Topic: [ANN][AMS] AmsterdamCoin™ | 100% PoS, Masternodes, Obfuscation, Seesaw - page 136. (Read 272368 times)
August 05, 2017, 07:35:26 AM
A new official bootstrap is required in the interim before the new wallet is released.
August 05, 2017, 07:09:08 AM
any reason for this coin being as cheap as it is? Just from glancing at the last page, there are wallet problems, but swap is on the way right? any info on it? swap ratio etc...
As far as i know Swap should be 1:1 (if there is a swap) and 100000 coins for a masternode
August 05, 2017, 07:04:42 AM
In recent days ams/btc, on yobit, had a larger volume than the previous six months.
August 05, 2017, 06:50:55 AM
any reason for this coin being as cheap as it is? Just from glancing at the last page, there are wallet problems, but swap is on the way right? any info on it? swap ratio etc...
August 05, 2017, 05:43:43 AM
Any idea when masternodes are coming out?
Master Nodes are out on the current wallet but I think AMS is going to be doing a coin swap to a new block chain.
Can we get a confirmation of a swap or any update there as well?
I want to get my wallet syncing and be prepared to move them on an exchange when necessary.
Want to know this too, to be prepared.
August 05, 2017, 02:01:01 AM
i still need help about synchronizing my wallet,any help pls?
download the bootstrap from the official website and make sure to paste it inside roaming folder for Amsterdam coin. here the link
http://www.amsterdamcoin.com/download/bootstrap.zip
August 05, 2017, 01:28:02 AM
i still need help about synchronizing my wallet,any help pls?
August 05, 2017, 12:21:31 AM
hi. can i get a nodes list. its not syncing at all.. thanks!
Code:
?
[
{
"addr" : "46.4.64.68:61510",
"services" : "00000001",
"lastsend" : 1501908011,
"lastrecv" : 1501908021,
"bytessent" : 2742485,
"bytesrecv" : 3727123,
"conntime" : 1501097642,
"timeoffset" : 0,
"pingtime" : 0.21875200,
"version" : 61403,
"subversion" : "/KeesdeWit:3.1.0/",
"inbound" : false,
"startingheight" : 1262326,
"banscore" : 0,
"syncnode" : true
},
{
"addr" : "81.169.178.19:61510",
"services" : "00000001",
"lastsend" : 1501908008,
"lastrecv" : 1501908021,
"bytessent" : 2760801,
"bytesrecv" : 5135294,
"conntime" : 1501097671,
"timeoffset" : 0,
"pingtime" : 0.30219300,
"version" : 61403,
"subversion" : "/KeesdeWit:3.1.0/",
"inbound" : false,
"startingheight" : 1262326,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "148.251.45.66:61510",
"services" : "00000001",
"lastsend" : 1501908021,
"lastrecv" : 1501908018,
"bytessent" : 3452337,
"bytesrecv" : 2572109,
"conntime" : 1501098378,
"timeoffset" : 0,
"pingtime" : 0.21873700,
"version" : 61403,
"subversion" : "/KeesdeWit:3.1.0/",
"inbound" : false,
"startingheight" : 1262341,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "60.225.35.163:61510",
"services" : "00000001",
"lastsend" : 1501908021,
"lastrecv" : 1501908021,
"bytessent" : 2533061,
"bytesrecv" : 2414692,
"conntime" : 1501279945,
"timeoffset" : 0,
"pingtime" : 0.43748800,
"version" : 61403,
"subversion" : "/KeesdeWit:3.1.0/",
"inbound" : false,
"startingheight" : 1267853,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "84.162.242.84:61510",
"services" : "00000001",
"lastsend" : 1501908021,
"lastrecv" : 1501908021,
"bytessent" : 1845312,
"bytesrecv" : 3276699,
"conntime" : 1501380932,
"timeoffset" : 0,
"pingtime" : 0.89061900,
"version" : 61403,
"subversion" : "/KeesdeWit:3.1.0/",
"inbound" : false,
"startingheight" : 1270882,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "51.15.74.115:61510",
"services" : "00000001",
"lastsend" : 1501908027,
"lastrecv" : 1501908027,
"bytessent" : 1395789,
"bytesrecv" : 3028006,
"conntime" : 1501502299,
"timeoffset" : 0,
"pingtime" : 0.21875400,
"version" : 61403,
"subversion" : "/KeesdeWit:3.1.0/",
"inbound" : false,
"startingheight" : 1274570,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "178.62.107.55:61510",
"services" : "00000001",
"lastsend" : 1501908017,
"lastrecv" : 1501908021,
"bytessent" : 1065290,
"bytesrecv" : 2733628,
"conntime" : 1501601355,
"timeoffset" : 0,
"pingtime" : 0.21875200,
"version" : 61403,
"subversion" : "/KeesdeWit:3.1.0/",
"inbound" : false,
"startingheight" : 1277573,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "213.108.119.84:61510",
"services" : "00000001",
"lastsend" : 1501908024,
"lastrecv" : 1501908024,
"bytessent" : 938180,
"bytesrecv" : 1166982,
"conntime" : 1501672566,
"timeoffset" : 0,
"pingtime" : 0.21875300,
"version" : 61403,
"subversion" : "/KeesdeWit:3.1.0/",
"inbound" : false,
"startingheight" : 1279802,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "98.230.78.71:61510",
"services" : "00000001",
"lastsend" : 1501908026,
"lastrecv" : 1501908025,
"bytessent" : 687181,
"bytesrecv" : 825945,
"conntime" : 1501732257,
"timeoffset" : 0,
"pingtime" : 1.09376700,
"version" : 61403,
"subversion" : "/KeesdeWit:3.1.0/",
"inbound" : false,
"startingheight" : 1281318,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "46.101.125.91:61510",
"services" : "00000001",
"lastsend" : 1501908019,
"lastrecv" : 1501908023,
"bytessent" : 277588,
"bytesrecv" : 511632,
"conntime" : 1501844510,
"timeoffset" : 0,
"pingtime" : 0.21875200,
"version" : 61403,
"subversion" : "/KeesdeWit:3.1.0/",
"inbound" : false,
"startingheight" : 1283101,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "149.210.193.140:61510",
"services" : "00000001",
"lastsend" : 1501908023,
"lastrecv" : 1501908024,
"bytessent" : 277380,
"bytesrecv" : 511848,
"conntime" : 1501845444,
"timeoffset" : 0,
"pingtime" : 0.30221500,
"version" : 61403,
"subversion" : "/KeesdeWit:3.1.0/",
"inbound" : false,
"startingheight" : 1283113,
"banscore" : 0,
"syncnode" : false
},
{
"addr" : "185.41.187.170:61510",
"services" : "00000001",
"lastsend" : 1501908017,
"lastrecv" : 1501908021,
"bytessent" : 37430,
"bytesrecv" : 82016,
"conntime" : 1501897906,
"timeoffset" : 0,
"pingtime" : 0.21875300,
"version" : 61403,
"subversion" : "/KeesdeWit:3.1.0/",
"inbound" : false,
"startingheight" : 1284411,
"banscore" : 0,
"syncnode" : false
}
]
August 05, 2017, 12:19:02 AM
Any idea when masternodes are coming out?
Master Nodes are out on the current wallet but I think AMS is going to be doing a coin swap to a new block chain.
Can we get a confirmation of a swap or any update there as well?
I want to get my wallet syncing and be prepared to move them on an exchange when necessary.
August 04, 2017, 11:24:45 PM
hi. can i get a nodes list. its not syncing at all.. thanks!
August 04, 2017, 07:19:25 PM
Any idea when masternodes are coming out?
Master Nodes are out on the current wallet but I think AMS is going to be doing a coin swap to a new block chain.
August 04, 2017, 06:45:14 PM
Open up the File Explorer
Go to your profile (The folder that is usually your name or whatever your username for win10 is)
--- On the top of the file explorer folder under the tab called VIEW there should be a tickbox for hidden items - tick this.
Open the hidden folder "AppData"
Then open "Roaming" folder
Find the folder called amsterdamcoin2 (it might be name slightly different on Windows - but it'll be obvious which folder is for Amsterdam Coin)
Put Bootstrap.dat in that folder.
Load the program.
If the program is still stuck and not loading blocks -- close it and repeat the above process, but when you put Bootstrap into the folder, delete all the files in it EXCEPT WALLET.dat
Restart the program and it will start to sync blocks.
Go to your profile (The folder that is usually your name or whatever your username for win10 is)
--- On the top of the file explorer folder under the tab called VIEW there should be a tickbox for hidden items - tick this.
Open the hidden folder "AppData"
Then open "Roaming" folder
Find the folder called amsterdamcoin2 (it might be name slightly different on Windows - but it'll be obvious which folder is for Amsterdam Coin)
Put Bootstrap.dat in that folder.
Load the program.
If the program is still stuck and not loading blocks -- close it and repeat the above process, but when you put Bootstrap into the folder, delete all the files in it EXCEPT WALLET.dat
Restart the program and it will start to sync blocks.
This still did not work. Tried several different things here and still stuck on 11 weeks.
August 04, 2017, 04:56:29 PM
Hi!
The password that is used in this file must match the password that the wallet is encrypted with?
Example Amsterdamcoin.Conf
listen=1
server=1
daemon=1
rpcuser=[An very long username]
rpcpassword=[An incredible strong pasword]
rpcallowip=127.0.0.1
The password that is used in this file must match the password that the wallet is encrypted with?
Example Amsterdamcoin.Conf
listen=1
server=1
daemon=1
rpcuser=[An very long username]
rpcpassword=[An incredible strong pasword]
rpcallowip=127.0.0.1
August 04, 2017, 03:10:54 PM
It seems like the wallet stops synchronising after a certain amount of time left alone and needs to be closed and re-opened for it to continue to sync.
August 04, 2017, 02:39:17 PM
Any idea when masternodes are coming out?
August 04, 2017, 12:35:25 PM
is there any telegram group for this coin to get connect with devs ?
Nothin of any sort....This is the only place...
We desparately need a community channel...Anyone hearing here....
August 04, 2017, 12:19:03 PM
Open up the File Explorer
Go to your profile (The folder that is usually your name or whatever your username for win10 is)
--- On the top of the file explorer folder under the tab called VIEW there should be a tickbox for hidden items - tick this.
Open the hidden folder "AppData"
Then open "Roaming" folder
Find the folder called amsterdamcoin2 (it might be name slightly different on Windows - but it'll be obvious which folder is for Amsterdam Coin)
Put Bootstrap.dat in that folder.
Load the program.
If the program is still stuck and not loading blocks -- close it and repeat the above process, but when you put Bootstrap into the folder, delete all the files in it EXCEPT WALLET.dat
Restart the program and it will start to sync blocks.
Go to your profile (The folder that is usually your name or whatever your username for win10 is)
--- On the top of the file explorer folder under the tab called VIEW there should be a tickbox for hidden items - tick this.
Open the hidden folder "AppData"
Then open "Roaming" folder
Find the folder called amsterdamcoin2 (it might be name slightly different on Windows - but it'll be obvious which folder is for Amsterdam Coin)
Put Bootstrap.dat in that folder.
Load the program.
If the program is still stuck and not loading blocks -- close it and repeat the above process, but when you put Bootstrap into the folder, delete all the files in it EXCEPT WALLET.dat
Restart the program and it will start to sync blocks.
It worked after copying (and replacing) all of the bootstrap files to the amsterdamcoin2 folder.
August 04, 2017, 10:44:33 AM
Open up the File Explorer
Go to your profile (The folder that is usually your name or whatever your username for win10 is)
--- On the top of the file explorer folder under the tab called VIEW there should be a tickbox for hidden items - tick this.
Open the hidden folder "AppData"
Then open "Roaming" folder
Find the folder called amsterdamcoin2 (it might be name slightly different on Windows - but it'll be obvious which folder is for Amsterdam Coin)
Put Bootstrap.dat in that folder.
Load the program.
If the program is still stuck and not loading blocks -- close it and repeat the above process, but when you put Bootstrap into the folder, delete all the files in it EXCEPT WALLET.dat
Restart the program and it will start to sync blocks.
Go to your profile (The folder that is usually your name or whatever your username for win10 is)
--- On the top of the file explorer folder under the tab called VIEW there should be a tickbox for hidden items - tick this.
Open the hidden folder "AppData"
Then open "Roaming" folder
Find the folder called amsterdamcoin2 (it might be name slightly different on Windows - but it'll be obvious which folder is for Amsterdam Coin)
Put Bootstrap.dat in that folder.
Load the program.
If the program is still stuck and not loading blocks -- close it and repeat the above process, but when you put Bootstrap into the folder, delete all the files in it EXCEPT WALLET.dat
Restart the program and it will start to sync blocks.
August 04, 2017, 10:25:53 AM
How does the bootstrap work in general? I've extracted the bootstrap folder to where the wallet application is held. Nothing changed when I open the wallet though.
Hey what Operating System are you using?
It is the windows wallet. I am running Windows 10 (64-bit). Thanks
August 04, 2017, 10:03:29 AM
How does the bootstrap work in general? I've extracted the bootstrap folder to where the wallet application is held. Nothing changed when I open the wallet though.
Hey what Operating System are you using?
Jump to: