Does anyone else have problems with the worker 1 min hash rates not showing up?
Topic: [ANN][The Original Multipool - Scrypt/SHA256/Scrypt-N/X11] multipool.us - page 58. (Read 424287 times)
January 03, 2014, 11:16:27 AM
January 03, 2014, 10:25:45 AM
Cryptsy is one of the worst exchanges I've personally used. They charge 3% to sell, + another 1% if you use their automatic sell on deposit option. My coins can take anywhere from 12 hours to 6 hours to show up. It can take 2-4 hours to get my BTC out of that place. Compare that to Vircurex, they charge 2% and my coins show up in 10 confirms, literally 5 minutes wait. When I withdraw my BTC from Vircurex. It hits my coinbase account before I can even refresh the page. You can make your own decision as to what you prefer. Vircurex's prices are usually a little bit lower than Cryptsy, but by the time you add back the 2% your saving it works out to the be the same. Plus you don't need to pop a blood vessel trying to place a trade 
Cryptsy certainly has its problems, but they don't charge 3% to sell - it's 0.3%. And the autosell is not 1%, it's 0.1%. That doesn't seem to egregious to me, but to each his own.
The timelines are also not as bad as what you say anymore, but still slower than I'd like for the most part. Usually it takes 30 mins for coins to show for me anymore. Getting BTC out does seem to take up to a couple of hours at times, however.
January 03, 2014, 09:23:36 AM
According to dustcoin.com digitalcoin is 333% more profitable then all other crypto's.
Why doesn't DGC show up on multipool as one of the more profitable coins?
Why doesn't DGC show up on multipool as one of the more profitable coins?
If you go to http://www.coinchoose.com/
DGC (2100%) is less profitable than LTC (2220%).
I see DGC 2420% and LTC 2050%
Anyway, could multipool also support barbecue coin?
January 03, 2014, 08:13:28 AM
According to dustcoin.com digitalcoin is 333% more profitable then all other crypto's.
Why doesn't DGC show up on multipool as one of the more profitable coins?
Why doesn't DGC show up on multipool as one of the more profitable coins?
If you go to http://www.coinchoose.com/
DGC (2100%) is less profitable than LTC (2220%).
January 03, 2014, 07:56:06 AM
According to dustcoin.com digitalcoin is 333% more profitable then all other crypto's.
Why doesn't DGC show up on multipool as one of the more profitable coins?
Why doesn't DGC show up on multipool as one of the more profitable coins?
January 03, 2014, 06:12:27 AM
Hi,
Since 2 days, i have big problem with dynamic pool.
If i connect pool1.us.multipool.us:7777 or pool1.eu.multipool.us:7777 I can't validate any share and i have this error message:
I use cudaminer.
But, if I connect server on the specific coin adresse like pool1.eu.multipool.us:3352 all is right.
Since 2 days, i have big problem with dynamic pool.
If i connect pool1.us.multipool.us:7777 or pool1.eu.multipool.us:7777 I can't validate any share and i have this error message:
Code:
[2014-01-03 12:08:07] Starting Stratum on stratum+tcp://pool1.us.multipool.us:7777
[2014-01-03 12:08:08] Stratum detected new block
[2014-01-03 12:08:08] GPU #0: GeForce 8800 GT with compute capability 1.1
[2014-01-03 12:08:08] GPU #0: interactive: 0, tex-cache: 0 , single-alloc: 0
[2014-01-03 12:08:08] GPU #0: Performing auto-tuning (Patience...)
[2014-01-03 12:08:08] GPU #0: maximum warps: 114
[2014-01-03 12:08:31] Stratum detected new block
[2014-01-03 12:08:32] GPU #0: 27.83 khash/s with configuration L28x3
[2014-01-03 12:08:32] GPU #0: using launch configuration L28x3
[2014-01-03 12:08:32] GPU #0: GeForce 8800 GT, 2688 hashes, 0.11 khash/s
[2014-01-03 12:08:32] GPU #0: GeForce 8800 GT, 8064 hashes, 20.02 khash/s
[2014-01-03 12:09:01] stratum_recv_line failed
[2014-01-03 12:09:01] Disconnecting stratum connection...
[2014-01-03 12:09:01] Stratum connection interrupted
[2014-01-03 12:09:01] GPU #0: GeForce 8800 GT, 760704 hashes, 26.59 khash/s
[2014-01-03 12:09:02] Stratum detected new block
[2014-01-03 12:09:05] Stratum detected new block
[2014-01-03 12:09:05] GPU #0: GeForce 8800 GT, 67200 hashes, 26.69 khash/s
[2014-01-03 12:09:09] GPU #0: GeForce 8800 GT, 104832 hashes, 26.02 khash/s
[2014-01-03 12:09:13] Stratum detected new block
[2014-01-03 12:09:13] GPU #0: GeForce 8800 GT, 115584 hashes, 26.09 khash/s
[2014-01-03 12:09:48] stratum_recv_line failed
[2014-01-03 12:09:48] Disconnecting stratum connection...
[2014-01-03 12:09:48] Stratum connection interrupted
[2014-01-03 12:09:48] GPU #0: GeForce 8800 GT, 940800 hashes, 26.61 khash/s
[2014-01-03 12:09:49] Stratum detected new block
[2014-01-03 12:10:19] stratum_recv_line failed
[2014-01-03 12:10:19] Disconnecting stratum connection...
[2014-01-03 12:10:19] Stratum connection interrupted
[2014-01-03 12:10:19] GPU #0: GeForce 8800 GT, 782208 hashes, 26.69 khash/s
[2014-01-03 12:10:19] Stratum detected new block
[2014-01-03 12:10:19] Stratum detected new block
[2014-01-03 12:10:33] Stratum detected new block
[2014-01-03 12:10:33] GPU #0: GeForce 8800 GT, 362880 hashes, 26.69 khash/s
[2014-01-03 12:10:37] Stratum detected new block
[2014-01-03 12:10:37] GPU #0: GeForce 8800 GT, 96768 hashes, 25.97 khash/s
I use cudaminer.
But, if I connect server on the specific coin adresse like pool1.eu.multipool.us:3352 all is right.
January 03, 2014, 05:34:25 AM
Did the pool update the DGC/ARG wallets?
Just checking..
https://bitcointalksearch.org/topic/m.4254408
https://bitcointalksearch.org/topic/m.4044501
Just checking..
https://bitcointalksearch.org/topic/m.4254408
https://bitcointalksearch.org/topic/m.4044501
January 02, 2014, 08:06:51 PM
Adapted from my intro post:
Wondering why DMD listed but "Not enabled"?
The other night, CoinWarz reported that it was up to $50/day! I know that profitability fluctuates, but its been on DOGE non-stop for days. I think it should have switched to DMD, at least for the burst, then switched back to DOGE, so that we can collect more of the various coins? Otherwise, it's just a DOGE pool.
Also, I've been watching CoinWarz pretty closely, and have noticed a trend: Netcoin is in the Top 5 for profitability most of the time! Why isn't this one added to Multipool?
Thanks for the great service!
Wondering why DMD listed but "Not enabled"?
The other night, CoinWarz reported that it was up to $50/day! I know that profitability fluctuates, but its been on DOGE non-stop for days. I think it should have switched to DMD, at least for the burst, then switched back to DOGE, so that we can collect more of the various coins? Otherwise, it's just a DOGE pool.
Also, I've been watching CoinWarz pretty closely, and have noticed a trend: Netcoin is in the Top 5 for profitability most of the time! Why isn't this one added to Multipool?
Thanks for the great service!
January 02, 2014, 07:30:57 PM
PPC confirms take ages. It will be worthless by the time we get a payout?
?
?It's possible that it falls below BTC profitability at payout, but no one can predict the market
You can still use the BTC port to be safe if you don't want to take chances.
January 02, 2014, 07:29:05 PM
Looks like the stratum "recv line failed, isconnecting errors" are coming back again. was going good for a bit.
January 02, 2014, 06:47:47 PM
PPC confirms take ages. It will be worthless by the time we get a payout??
? 
January 02, 2014, 06:44:33 PM
US East pool server is up at us-east.multipool.us
Added new A record for US West pool us-west.multipool.us
pool1.us will now DNS load balance between east and west. If you want to make sure you go to a particular area, please change your miners to point at that pool directly.
Added new A record for US West pool us-west.multipool.us
pool1.us will now DNS load balance between east and west. If you want to make sure you go to a particular area, please change your miners to point at that pool directly.
I pointed one miner to east. Been there ~20 mins or so. cgminer says this:
Code:
Pool: stratum+tcp://us-east.multipool.us:7777
Queued work requests: 21
Share submissions: 99
Accepted shares: 98
Rejected shares: 1
Accepted difficulty shares: 9408
Rejected difficulty shares: 96
Reject ratio: 1.0%
Items worked on: 82
Discarded work due to new blocks: 38
Stale submissions discarded due to new blocks: 0
Unable to get work from server occasions: 4
Submitting work remotely delay occasions: 0
That unable to get work part is the concerning part. Here's another server I've been on for 24 hours:
Code:
Pool: stratum+tcp://stratum.dogehouse.org:3333
Queued work requests: 2601
Share submissions: 3961
Accepted shares: 3901
Rejected shares: 60
Accepted difficulty shares: 954452
Rejected difficulty shares: 15915
Reject ratio: 1.5%
Items worked on: 8133
Discarded work due to new blocks: 5211
Stale submissions discarded due to new blocks: 0
Unable to get work from server occasions: 0
Submitting work remotely delay occasions: 0
Is this just the nature of being multiport?
M
January 02, 2014, 06:24:33 PM
They don't do auto sell, one nice thing I do like.
And most sites I find don't want you to send from your mining account to there site. They want it from wallet only.
I look at it as a growing market. Only been around for a few years, stock market been around for 200. I hope with time, will come improvements to the sites and better trading.
And most sites I find don't want you to send from your mining account to there site. They want it from wallet only.
I look at it as a growing market. Only been around for a few years, stock market been around for 200. I hope with time, will come improvements to the sites and better trading.
January 02, 2014, 05:33:19 PM
I wonder does anybody know how many confirmations needed for doge and dmd on cryptsy and vircurex ?
Hard to predict for cryptsy. I'm sure there's a set number, but whether the exchange is working right or not and makes them accessible is a different story.
Vircurex should have it listed. But I just looked, I don't see it.
I believe Coins-e is 10 or less. (It's what I use.)
M
For me it's all over the place. Right now I have 3 stuck - 539, 383, 274 confirmations from Jan 1st. I see it as low so far as 26, and as high as the 539. I had one sitting from Dec 31's and that one went today in the afternoon. I did send a email a while ago to ask them, and they said there was no hard number. Just "network turn-around time". I call bull, but what ever.
Cryptsy is one of the worst exchanges I've personally used. They charge 3% to sell, + another 1% if you use their automatic sell on deposit option. My coins can take anywhere from 12 hours to 6 hours to show up. It can take 2-4 hours to get my BTC out of that place. Compare that to Vircurex, they charge 2% and my coins show up in 10 confirms, literally 5 minutes wait. When I withdraw my BTC from Vircurex. It hits my coinbase account before I can even refresh the page. You can make your own decision as to what you prefer. Vircurex's prices are usually a little bit lower than Cryptsy, but by the time you add back the 2% your saving it works out to the be the same. Plus you don't need to pop a blood vessel trying to place a trade
January 02, 2014, 04:34:42 PM
I wonder does anybody know how many confirmations needed for doge and dmd on cryptsy and vircurex ?
Hard to predict for cryptsy. I'm sure there's a set number, but whether the exchange is working right or not and makes them accessible is a different story.
Vircurex should have it listed. But I just looked, I don't see it.
I believe Coins-e is 10 or less. (It's what I use.)
M
For me it's all over the place. Right now I have 3 stuck - 539, 383, 274 confirmations from Jan 1st. I see it as low so far as 26, and as high as the 539. I had one sitting from Dec 31's and that one went today in the afternoon. I did send a email a while ago to ask them, and they said there was no hard number. Just "network turn-around time". I call bull, but what ever.
January 02, 2014, 04:29:44 PM
US East pool server is up at us-east.multipool.us
Added new A record for US West pool us-west.multipool.us
pool1.us will now DNS load balance between east and west. If you want to make sure you go to a particular area, please change your miners to point at that pool directly.
Added new A record for US West pool us-west.multipool.us
pool1.us will now DNS load balance between east and west. If you want to make sure you go to a particular area, please change your miners to point at that pool directly.
I am really loving these new US servers. My GPU farm runs at 34Mh/s but I could never get more than 28-29/Mh/s from the stats page. Now it shows me running at 33.8Mh/s!!! Finally I can spend a little less time solo mining.
On a side note, I did really well on WDC last night. I hit 7 blocks in 10 hours. I'd rather be able to be part of a pool though.
Other than the blistering new speeds, I did have one problem. I had one of my workers temporarily banned. Fortunately my automation scripts provide a unique worker name for each rig, otherwise I would have been really SOL. The problem seems to have cleared up for now. I have it set to not submit stale shares, so not sure why it was misbehaving.
January 02, 2014, 03:29:21 PM
US East pool server is up at us-east.multipool.us
Added new A record for US West pool us-west.multipool.us
pool1.us will now DNS load balance between east and west. If you want to make sure you go to a particular area, please change your miners to point at that pool directly.
Added new A record for US West pool us-west.multipool.us
pool1.us will now DNS load balance between east and west. If you want to make sure you go to a particular area, please change your miners to point at that pool directly.
January 02, 2014, 11:57:16 AM
Similar issue as a few others it seems....tried to withdraw MOON last night....coin is gone..but no TXID yet? shows in my recent withdrawals...but not in the all withdrawals page....sent an email...just waiting...
Tracked it down...
Tracked it down...
January 02, 2014, 11:44:15 AM
I'm having problems connecting to the US SHA-256 server. I can connect to the EU server just fine. I seem to only have this problem on new connections, not on proxies that are already connected and getting work.
Anyone else experiencing this?
Anyone else experiencing this?
Seems to be working now.
January 02, 2014, 11:01:40 AM
I'm having problems connecting to the US SHA-256 server. I can connect to the EU server just fine. I seem to only have this problem on new connections, not on proxies that are already connected and getting work.
Anyone else experiencing this?
Anyone else experiencing this?
Jump to: