[ANN][The Original Multipool - Scrypt/SHA256/Scrypt-N/X11] multipool.us - page 59.

flound1129

hero member

Activity: 938

Merit: 1000

www.multipool.us

Quote from: Gasai Yuno on January 01, 2014, 10:36:26 AM

Quote from: crazyivan on January 01, 2014, 10:33:54 AM

I am getting quite high % of reject on each of my 3 rigs, about 15%, I get message (STALE SHARE previous job 1).

Can someone help me with this pls.

Thx

i also leaved because of high rejected value.

there s something wrong with multipool.us i switched to an other pool and im getting only %1 rejected.
it was %30 at multipool.us.

Heavy load lately combined with DDOS attacks. I am opening the new east coast pool server tomorrow which will double our US capacity.

flound1129

hero member

Activity: 938

Merit: 1000

www.multipool.us

Quote from: TheFuneral on January 02, 2014, 01:51:09 AM

why did you decide to add mooncoin with no exchange? I believe this is the first time I've seen you do this with a coin.

Thanks again for all your hard work. I appreciate you service!

That's not true we also added TIPS without an exchange.

I don't necessarily need an exchange to add a coin, I only need an exchange to add it to the Multiport.

sirejoe

newbie

Activity: 12

Merit: 0

Quote from: Spiffy_1 on January 02, 2014, 04:12:11 AM

It was a predetermined launch deal for moon. To have an established large pool to start the blockchain from the block 1 while other pools had to compile and setup before mining. The result they wanted was an established blockchain at low difficulty to prevent forks in the chain. To say the release was problematic was an understatement. Being the only pool we suffered from an incredible surge of miners as well as a few DDOS attacks from lesser people. I don't know if it will be added to an exchange any time soon but you can bet that if its profitable, flound will throw it on the multipool in the future.

Its on coinex.pw. Its an exchange of sorts. You can trade it on there anyways. So early days and it got on an exchange, not bad I think. But yes, a horrid start.

Spiffy_1

full member

Activity: 235

Merit: 100

It was a predetermined launch deal for moon. To have an established large pool to start the blockchain from the block 1 while other pools had to compile and setup before mining. The result they wanted was an established blockchain at low difficulty to prevent forks in the chain. To say the release was problematic was an understatement. Being the only pool we suffered from an incredible surge of miners as well as a few DDOS attacks from lesser people. I don't know if it will be added to an exchange any time soon but you can bet that if its profitable, flound will throw it on the multipool in the future.

TheFuneral

sr. member

Activity: 356

Merit: 250

why did you decide to add mooncoin with no exchange? I believe this is the first time I've seen you do this with a coin.

Thanks again for all your hard work. I appreciate you service!

stuartrgreene

newbie

Activity: 14

Merit: 0

I have a post in the newbies thread, but now I guess I can post here. I have DroidBTCminer on my Kindle fire conected to the getwork address on multipool. The miner says I've been successfully mining 200-500 khash/sec and giving me yays every couple seconds, but I haven't seen an update on multipools site at all. It's been 15+ hours and I'm not sure if it's me or the site. Please help.

https://bitcointalksearch.org/topic/m.4263131

lolanonlol

newbie

Activity: 22

Merit: 0

multipool has always been the best for me.

Dosmas

full member

Activity: 162

Merit: 100

Have been mining WDC for the past 4 hours but it seems I haven't received any of them. I don't see my summed khashrate at the topleft but the individual workers do show that they are busy on wdc.

Any actions concerned since is that I have change from EUlink to USlink. Since this last one works in my setup.

How should I proceed?

phaddie

sr. member

Activity: 308

Merit: 250

Quote from: mdude77 on January 01, 2014, 07:05:21 AM

Quote from: phaddie on January 01, 2014, 12:00:12 AM

Can someone assist me in setting my worker difficulty? I have been playing with it but I am not sure it is making much difference.

I have just a single r9 290 and right now it is set at 192. Everything seems to be going well but I am not sure where my difficulty should be any of the others pools I have joined I was not setting the worker difficulty myself.

Thank you for any assistance.

Phad

192 is probably a bit high for one video card. Maybe try 96?

Also don't expect your miner to register the change immediately. For some reason it takes a bit to propagate through.

M

Thanx mate.

Symbiont

full member

Activity: 210

Merit: 100

Hi, I need some help, please.

I mined mooncoin since 4h with +/- 6000KH/s. Est. coins/Hour are +/- 89.000. Est. Coins/Block atm are 6883.69.

My payouts:

Recent Payouts
Time         Block   Amount
Jan 01 4:29 PM   3632   3101.29
Jan 01 4:29 PM   3631   5925.97
Jan 01 4:29 PM   3630   3692.26
Jan 01 4:29 PM   3628   4500.2
Jan 01 4:05 PM   3623   398.582
Jan 01 4:05 PM   3622   1123.96
Jan 01 4:05 PM   3621   2772.77
Jan 01 4:05 PM   3620   1212.88
Jan 01 4:05 PM   3619   5109.33
Jan 01 3:55 PM   3617   4344.81
Total:            32182.052

Between 400 and 5900 Coin/Block!!!

In the last 4h I got 108,048.48150635 coins (confirmed and unconfirmed).

It should be +/- 360.000. I´m missing 250.000 coins for the last 4h.

Where are the coins?

At the moment my rate is:

10 Minute Hash Rate   6201 Kh/s
Valid Round Shares   170816
Invalid Round Shares   448
Your Efficiency   99.74%
Est. Coins/Block   6883.69
Est. Coins/Day   2158575.936
Lifetime Total MOON Earned   64795.347

Gasai Yuno

full member

Activity: 154

Merit: 100

Yukki Yukki Yukki!

Quote from: crazyivan on January 01, 2014, 10:33:54 AM

I am getting quite high % of reject on each of my 3 rigs, about 15%, I get message (STALE SHARE previous job 1).

Can someone help me with this pls.

Thx

i also leaved because of high rejected value.

there s something wrong with multipool.us i switched to an other pool and im getting only %1 rejected.
it was %30 at multipool.us.

crazyivan

legendary

Activity: 1652

Merit: 1007

DMD Diamond Making Money 4+ years! Join us!

I am getting quite high % of reject on each of my 3 rigs, about 15%, I get message (STALE SHARE previous job 1).

Can someone help me with this pls.

Thx

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: phaddie on January 01, 2014, 12:00:12 AM

Can someone assist me in setting my worker difficulty? I have been playing with it but I am not sure it is making much difference.

I have just a single r9 290 and right now it is set at 192. Everything seems to be going well but I am not sure where my difficulty should be any of the others pools I have joined I was not setting the worker difficulty myself.

Thank you for any assistance.

Phad

192 is probably a bit high for one video card. Maybe try 96?

Also don't expect your miner to register the change immediately. For some reason it takes a bit to propagate through.

M

spherix

newbie

Activity: 13

Merit: 0

hi,

i am using the API as is now.
But i'm noticing what seems to be a bug.
The return per coin is something like this :
,"cap":{"confirmed_rewards":"0","hashrate":"0","estimated_rewards":"0","payout_history":"0","pool_hashrate":4111,"round_shares":false,"block_shares":"57874715"}

I think estimated_rewards is supposed to be filled with 'Per-block estimate'
but it seems that estimated_rewards is filled with the value from
Per-Block Estimate when that value > 0.
but when Per-Block Estimate = 0 , then it is filled with the value from unconfirmed.
It would be great if it would always be filled in the same way and an extra field for the unconfirmed
or have 2 extra fields in the api-return : unconfirmed_rewards & block_estimate.

kind regards,
spherix

phaddie

sr. member

Activity: 308

Merit: 250

Can someone assist me in setting my worker difficulty? I have been playing with it but I am not sure it is making much difference.

I have just a single r9 290 and right now it is set at 192. Everything seems to be going well but I am not sure where my difficulty should be any of the others pools I have joined I was not setting the worker difficulty myself.

Thank you for any assistance.

Phad

Chuvanan.org

newbie

Activity: 50

Merit: 0

Please check for me !
Withdraw from multipool.us to coinex.pw:
MOON Jan 01 8:56 AM 2JvLriaxBfSqN2bHi8xfUTDzBaqzdE6VrV 30,641.10620000 2ae52339de49f379e75a9a37064e6c22820724218805d6a0b148aae625e08a47 => OK (Confirmed)
MOON Jan 01 8:05 AM 2JvLriaxBfSqN2bHi8xfUTDzBaqzdE6VrV 267,690.16267000 c5c945ed7cd0eb6d6e3127b370138e03c0a6fcfb1396e0ccd5013e7b4d6961d3 => ?? ?? ?? ?? ?? ?? ?? (don't show on coinex.pw)

User: Lamnguyen (multipool.us)

worldlybedouin

sr. member

Activity: 376

Merit: 250

Quote from: worldlybedouin on December 31, 2013, 06:41:48 PM

Any idea on what's delaying the cashout of MOON? I've requested my withdrawl and it's still "pending". I've never experienced this type of delay before...

Nevermind...spoke 2secs too soon. Tongue

worldlybedouin

sr. member

Activity: 376

Merit: 250

Any idea on what's delaying the cashout of MOON? I've requested my withdrawl and it's still "pending". I've never experienced this type of delay before...

mdude77

legendary

Activity: 1540

Merit: 1001

We just switched to ARG. It isn't working so well. Detecting a new block every 2 to 5 seconds, I keep getting rejects because they can't get submitted fast enough.

Code:

[2013-12-31 13:37:09] Stratum from pool 0 detected new block
[2013-12-31 13:37:13] Stratum from pool 0 detected new block
[2013-12-31 13:37:17] Stratum from pool 0 detected new block
[2013-12-31 13:37:20] Stratum from pool 0 detected new block
[2013-12-31 13:37:22] Stratum from pool 0 detected new block
[2013-12-31 13:37:26] Stratum from pool 0 detected new block
[2013-12-31 13:37:28] Stratum from pool 0 detected new block
[2013-12-31 13:37:30] Accepted 2e1cbb12 Diff 1.42K/96 GPU 0 pool 0
[2013-12-31 13:37:31] Stratum from pool 0 detected new block
[2013-12-31 13:37:31] Rejected 01f8d130 Diff 130/96 GPU 0 pool 0 (STALE SHARE (Previous Job '1
[2013-12-31 13:37:33] Stratum from pool 0 detected new block
[2013-12-31 13:37:36] Stratum from pool 0 detected new block
[2013-12-31 13:37:38] Stratum from pool 0 detected new block
[2013-12-31 13:37:43] Stratum from pool 0 detected new block
[2013-12-31 13:37:44] Rejected 021fce01 Diff 121/96 GPU 0 pool 0 (STALE SHARE (Previous Job '1
[2013-12-31 13:37:46] Stratum from pool 0 detected new block
[2013-12-31 13:37:48] Stratum from pool 0 detected new block
[2013-12-31 13:37:52] Stratum from pool 0 detected new block
[2013-12-31 13:37:56] Stratum from pool 0 detected new block
[2013-12-31 13:38:00] Accepted 1284730e Diff 3.54K/96 GPU 0 pool 0
[2013-12-31 13:38:02] Stratum from pool 0 detected new block
[2013-12-31 13:38:04] Stratum from pool 0 detected new block
[2013-12-31 13:38:05] Accepted 85a05a7b Diff 490/96 GPU 0 pool 0
[2013-12-31 13:38:07] Stratum from pool 0 detected new block
[2013-12-31 13:38:09] Stratum from pool 0 detected new block
[2013-12-31 13:38:09] Accepted 022367df Diff 120/96 GPU 0 pool 0
[2013-12-31 13:38:14] Stratum from pool 0 detected new block
[2013-12-31 13:38:15] Rejected d8a2ee81 Diff 303/96 GPU 0 pool 0 (STALE SHARE (Previous Job '1
[2013-12-31 13:38:15] Accepted 35a46d62 Diff 1.22K/96 GPU 0 pool 0
[2013-12-31 13:38:20] Stratum from pool 0 detected new block
[2013-12-31 13:38:23] Stratum from pool 0 detected new block
[2013-12-31 13:38:24] Rejected 023977f4 Diff 115/96 GPU 0 pool 0 (STALE SHARE (Previous Job '1
[2013-12-31 13:38:24] Accepted 022d9a64 Diff 118/96 GPU 0 pool 0
[2013-12-31 13:38:25] Stratum from pool 0 detected new block

M

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: Vampire_sumy on December 31, 2013, 08:34:02 AM

I wonder does anybody know how many confirmations needed for doge and dmd on cryptsy and vircurex ?

Hard to predict for cryptsy. I'm sure there's a set number, but whether the exchange is working right or not and makes them accessible is a different story.

Vircurex should have it listed. But I just looked, I don't see it.

I believe Coins-e is 10 or less. (It's what I use.)

M

Topic: [ANN][The Original Multipool - Scrypt/SHA256/Scrypt-N/X11] multipool.us - page 59. (Read 424294 times)