TIPS pool not sending payments?
When did you request it? Sometimes it takes almost an hour.
Topic: [ANN][The Original Multipool - Scrypt/SHA256/Scrypt-N/X11] multipool.us - page 61. (Read 424294 times)
December 30, 2013, 05:53:44 PM
When did you request it? Sometimes it takes almost an hour.
December 30, 2013, 05:53:35 PM
I am using a scrypt miner with multipool. Maybe I am missing something but DOGE is not the most profitable coin. I mined at 1.5Gh yesterday and today. I split the miner's time between the multi port and the Worldcoin port.
DOGE = .008 BTC
WDC = .012 BTC
Am I missing something here?
DOGE = .008 BTC
WDC = .012 BTC
Am I missing something here?
December 30, 2013, 05:50:57 PM
December 30, 2013, 04:45:35 PM
Things are running much quicker on the new server... Thanks.
PS - Rolling out a new GUI in the midst of all the Moon Coin mayhem?? Someone is rocking some big brass balls!
PS - Rolling out a new GUI in the midst of all the Moon Coin mayhem?? Someone is rocking some big brass balls!
December 30, 2013, 04:43:26 PM
Something just happen the the website? It all went to a blue background??? The IP address where different also for mining? It appears to be back now. Was like that for a few minutes.
In any case, the website seems to be moving a lot faster. Last few nights I was on, took forever to move around the pages.
In any case, the website seems to be moving a lot faster. Last few nights I was on, took forever to move around the pages.
December 30, 2013, 03:55:17 PM
Exactly my question
December 30, 2013, 03:37:58 PM
Um... what happened to MOON blocks 50 through 1080? Did they not make it into the database?
I don't think any other pools were up during that time as all the other blocks during that time went to Multipool.
I don't think any other pools were up during that time as all the other blocks during that time went to Multipool.
December 30, 2013, 02:48:16 PM
Multipool acts as a sort of "pass-through" for p2pool when it's mining BTC, which has known issues with stratum_proxy (both .py and .exe, to my knowledge).
Until flound makes a separate BTC pool, to use multipool you'll have to use bfgminer's proxy or simply lock your mining to one of the other SHA-256 pools.
Until flound makes a separate BTC pool, to use multipool you'll have to use bfgminer's proxy or simply lock your mining to one of the other SHA-256 pools.
December 30, 2013, 02:13:42 PM
Dear readers,
I have been using multipool for a while now for scrypt-based mining and i`m very pleased with the result.
Today I`ve bought an asicminer cube (bargain), though I cant seem to get the stratum proxy to work.
All my stratum settings to the cube are correct since it works on btcguild's pool.
Below is the code of my .bat script to start the mining process, though it fails to connect.
Who could help me?
I have been using multipool for a while now for scrypt-based mining and i`m very pleased with the result.
Today I`ve bought an asicminer cube (bargain), though I cant seem to get the stratum proxy to work.
All my stratum settings to the cube are correct since it works on btcguild's pool.
Below is the code of my .bat script to start the mining process, though it fails to connect.
Code:
cd D:\Apps\Bitcoin_minen
Stratum_proxy.exe -o stratum+tcp://pool1.eu.multipool.us -p 8888
Stratum_proxy.exe -o stratum+tcp://pool1.eu.multipool.us -p 8888
Who could help me?
December 30, 2013, 08:33:37 AM
can't connect to stratum+tcp://pool1.us.multipool.us:3352.
stratum+tcp://pool1.eu.multipool.us:3352 works, but gives a lot of rejected shares :/
stratum+tcp://pool1.eu.multipool.us:3352 works, but gives a lot of rejected shares :/
Kinda opposite here.. and kinda same then again..
Us pool works giving only few rejects, but eu pool.. can give up 50% rejects pretty much randomly. One round more, other less. Changing to us pool fixes the problem, zero to some percentage of rejects.
Started mining today and have been fiddling with gpu settings.. being kinda difficult, as things seemed more or less random.
EDIT: Being mining on scrypt stratum multiports.
EDIT2: Eu pool also cutted connection quite regularly, so far us has being stable.
December 30, 2013, 07:41:07 AM
can't connect to stratum+tcp://pool1.us.multipool.us:3352.
stratum+tcp://pool1.eu.multipool.us:3352 works, but gives a lot of rejected shares :/
stratum+tcp://pool1.eu.multipool.us:3352 works, but gives a lot of rejected shares :/
December 30, 2013, 07:31:18 AM
Flound,
Do you know which port you will open the moon pool on?
To answer my own question: 3358Do you know which port you will open the moon pool on?
Announced at https://mooncoin.wordpress.com/
Id like to see official word from MP Admin. Those of us that have been using MP for a while now would trust it coming from MP Admins over the site of a new coin.
also waiting for a word of flound to set up my miners.
December 30, 2013, 04:41:50 AM
Server Stats - BTC
Pool Hash Rate 11,399.904 Gh/s
Pool Efficiency 87.21%
Maybe it's time to leave P2Pool? And go back to the dedicated pool that MP originally had, now that we have 11 TH/s
Pool Hash Rate 11,399.904 Gh/s
Pool Efficiency 87.21%
Maybe it's time to leave P2Pool? And go back to the dedicated pool that MP originally had, now that we have 11 TH/s
11 TH now is less than we started with when you take diff into account.
However, I will be setting up a second multiport that points at a dedicated BTC pool and let people switch over if they like. This should solve most of the issues with stales, and some ASICs, and hopefully allow the SHA-256 multiport to grow larger.
December 30, 2013, 01:37:06 AM
So why is cgminer showing the direct ports for WDC and Doge as dead?
Looks like people are still mining, but I can no longer connect.....
Looks like people are still mining, but I can no longer connect.....
December 30, 2013, 12:14:38 AM
Flound,
Do you know which port you will open the moon pool on?
To answer my own question: 3358Do you know which port you will open the moon pool on?
Announced at https://mooncoin.wordpress.com/
Id like to see official word from MP Admin. Those of us that have been using MP for a while now would trust it coming from MP Admins over the site of a new coin.
December 30, 2013, 12:01:18 AM
Server Stats - BTC
Pool Hash Rate 11,399.904 Gh/s
Pool Efficiency 87.21%
Maybe it's time to leave P2Pool? And go back to the dedicated pool that MP originally had, now that we have 11 TH/s
Pool Hash Rate 11,399.904 Gh/s
Pool Efficiency 87.21%
Maybe it's time to leave P2Pool? And go back to the dedicated pool that MP originally had, now that we have 11 TH/s
December 29, 2013, 10:22:33 PM
Flound,
Do you know which port you will open the moon pool on?
To answer my own question: 3358Do you know which port you will open the moon pool on?
Announced at https://mooncoin.wordpress.com/
December 29, 2013, 09:10:46 PM
Flound,
Do you know which port you will open the moon pool on?
Do you know which port you will open the moon pool on?
December 29, 2013, 03:46:29 PM
I've finally got my ASICMiner cube up and running with BFGminer and multipool using the following code in a .bat 
However I seem to be getting different hash rates in
a) the profit snapshot top left of multipool (at 32gh/s as it should be with my cube overclocked)
b) the worker hashrate (1min and 10 min)
c) my cubes config panel
d) BFGMiner (pics below)
Which one should I trust the most for an accurate value? At the moment I've no real idea how much hashing power I'm putting into the pool as different parts are saying different things ... only been connected about an hour or so and am new to BFGminer and my cubes config.
a)
b)
c)
d)
Code:
bfgminer.exe -o stratum+tcp://pool1.eu.multipool.us:8888 -u sytherz.1 -p x --http-port 8332
However I seem to be getting different hash rates in
a) the profit snapshot top left of multipool (at 32gh/s as it should be with my cube overclocked)
b) the worker hashrate (1min and 10 min)
c) my cubes config panel
d) BFGMiner (pics below)
Which one should I trust the most for an accurate value? At the moment I've no real idea how much hashing power I'm putting into the pool as different parts are saying different things ... only been connected about an hour or so and am new to BFGminer and my cubes config.
a)
b)
c)
d)
December 29, 2013, 11:47:35 AM
Hello. Around one week we almost all the time mained DGC, but other cryptocurrencies more profitable, for example right at this moment Diamond and Grand coin seriosly more profitable then Doge coin (check both plz, coinwarz and coinchoose). Please, explain why??
MP adjusts for stales and rejects. I do not think CoinWarz does and CoinChoose might. Flound explains it on the Help page.
Jump to: