girino, and new X15 BAMT version?
x15? those guys never learn? X13 is not any more secure than x11, just slower, and x15 shouldn't be any better. can you point me to any coin that do use this X15?
thanks.
Topic: [ANN][X11] X11/Darkcoin Gpu Miner - updated to use leaked binaries - even faster - page 3. (Read 102476 times)
June 28, 2014, 08:59:17 AM
x15? those guys never learn? X13 is not any more secure than x11, just slower, and x15 shouldn't be any better. can you point me to any coin that do use this X15?
thanks.
June 28, 2014, 08:33:18 AM
does girino 14.6 miner have an advantage over the free 14.6 miner that reachers 4 + kh/s on x-11 for a 280X?
June 28, 2014, 06:47:15 AM
girino, and new X15 BAMT version?
June 25, 2014, 01:13:24 AM
girino, what about X13 version for 14.6 driver?
June 24, 2014, 04:33:20 PM
Do you know what the speed increase is for X11 on the new 14.6 Drivers?
EDIT: Holy Hell Batman!!! Getting an extra MH on each of my 7950's with the new drivers! Great work Girino!!
EDIT: Holy Hell Batman!!! Getting an extra MH on each of my 7950's with the new drivers! Great work Girino!!
don't thank me, thank AMD. All I did is recompile the source with the new driver. The driver did the rest.
June 24, 2014, 10:20:08 AM
Do you know what the speed increase is for X11 on the new 14.6 Drivers?
EDIT: Holy Hell Batman!!! Getting an extra MH on each of my 7950's with the new drivers! Great work Girino!!
EDIT: Holy Hell Batman!!! Getting an extra MH on each of my 7950's with the new drivers! Great work Girino!!
June 24, 2014, 08:03:42 AM
(...)
How i can updrade it on BAMT?
I install 14.6 driver but have only HW ((
How i can updrade it on BAMT?
I install 14.6 driver but have only HW ((
You can't mine with 14.6. How did you upgrade to 14.6?/
Adapted my x11 version so it works with 14.6 too. Linux version available (same place as always, or this link): https://www.dropbox.com/s/vsq546ovvunqbri/x11-sgminer-bamt-AMD-BETA-DRIVERS-14.6-build2.tgz
Update: windows version available (not fully tested, please send feedback): https://www.dropbox.com/s/23c6k5erpc8p2oz/x11-sgminer-win-AMD-BETA-DRIVERS-14.6-mingw-build3.zip
Does this miner still have the Dev fee?
yes. this miner has dev fee of 2% (x11) and 1% (x13).
June 23, 2014, 10:16:40 PM
(...)
How i can updrade it on BAMT?
I install 14.6 driver but have only HW ((
How i can updrade it on BAMT?
I install 14.6 driver but have only HW ((
You can't mine with 14.6. How did you upgrade to 14.6?/
Adapted my x11 version so it works with 14.6 too. Linux version available (same place as always, or this link): https://www.dropbox.com/s/vsq546ovvunqbri/x11-sgminer-bamt-AMD-BETA-DRIVERS-14.6-build2.tgz
Update: windows version available (not fully tested, please send feedback): https://www.dropbox.com/s/23c6k5erpc8p2oz/x11-sgminer-win-AMD-BETA-DRIVERS-14.6-mingw-build3.zip
Does this miner still have the Dev fee?
June 23, 2014, 05:57:56 PM
(...)
How i can updrade it on BAMT?
I install 14.6 driver but have only HW ((
How i can updrade it on BAMT?
I install 14.6 driver but have only HW ((
You can't mine with 14.6. How did you upgrade to 14.6?/
Adapted my x11 version so it works with 14.6 too. Linux version available (same place as always, or this link): https://www.dropbox.com/s/vsq546ovvunqbri/x11-sgminer-bamt-AMD-BETA-DRIVERS-14.6-build2.tgz
Update: windows version available (not fully tested, please send feedback): https://www.dropbox.com/s/23c6k5erpc8p2oz/x11-sgminer-win-AMD-BETA-DRIVERS-14.6-mingw-build3.zip
June 19, 2014, 04:27:48 PM
Still Linux hashrate 20% lower.
For 7790 X13 algo:
800-1000kHs versus 1120Khs stable on Windows 8.1
Changing intensity=17 to xintensity=156 rised hashs to 900-1120Khs
. But its not stable yet.
For 7790 X13 algo:
800-1000kHs versus 1120Khs stable on Windows 8.1
Changing intensity=17 to xintensity=156 rised hashs to 900-1120Khs
. But its not stable yet.Differences between OSes are probably due to the version of the Driver. Check if you are using the same drivers on linux and windows. (and make sure you remove all the .bin files generated by the miner before running it again).
14.XX drivers are really faster than 13.XX. If you can upgrade your driver on BAMT or SMOS to 14.04 you should get a better performance.
I install 14.6 driver but have only HW ((
You can't mine with 14.6. How did you upgrade to 14.6?/
June 19, 2014, 04:20:25 PM
Has a failover option been added to this miner?
Thanks,
Martin
Thanks,
Martin
June 19, 2014, 11:34:34 AM
Still Linux hashrate 20% lower.
For 7790 X13 algo:
800-1000kHs versus 1120Khs stable on Windows 8.1
Changing intensity=17 to xintensity=156 rised hashs to 900-1120Khs. But its not stable yet.
For 7790 X13 algo:
800-1000kHs versus 1120Khs stable on Windows 8.1
Changing intensity=17 to xintensity=156 rised hashs to 900-1120Khs
. But its not stable yet.Differences between OSes are probably due to the version of the Driver. Check if you are using the same drivers on linux and windows. (and make sure you remove all the .bin files generated by the miner before running it again).
14.XX drivers are really faster than 13.XX. If you can upgrade your driver on BAMT or SMOS to 14.04 you should get a better performance.
I install 14.6 driver but have only HW ((
You can't mine with 14.6. How did you upgrade to 14.6?/
June 19, 2014, 11:06:52 AM
Still Linux hashrate 20% lower.
For 7790 X13 algo:
800-1000kHs versus 1120Khs stable on Windows 8.1
Changing intensity=17 to xintensity=156 rised hashs to 900-1120Khs. But its not stable yet.
For 7790 X13 algo:
800-1000kHs versus 1120Khs stable on Windows 8.1
Changing intensity=17 to xintensity=156 rised hashs to 900-1120Khs
. But its not stable yet.Differences between OSes are probably due to the version of the Driver. Check if you are using the same drivers on linux and windows. (and make sure you remove all the .bin files generated by the miner before running it again).
14.XX drivers are really faster than 13.XX. If you can upgrade your driver on BAMT or SMOS to 14.04 you should get a better performance.
I install 14.6 driver but have only HW ((
June 17, 2014, 08:30:54 PM
Still Linux hashrate 20% lower.
For 7790 X13 algo:
800-1000kHs versus 1120Khs stable on Windows 8.1
Changing intensity=17 to xintensity=156 rised hashs to 900-1120Khs. But its not stable yet.
For 7790 X13 algo:
800-1000kHs versus 1120Khs stable on Windows 8.1
Changing intensity=17 to xintensity=156 rised hashs to 900-1120Khs
. But its not stable yet.Differences between OSes are probably due to the version of the Driver. Check if you are using the same drivers on linux and windows. (and make sure you remove all the .bin files generated by the miner before running it again).
14.XX drivers are really faster than 13.XX. If you can upgrade your driver on BAMT or SMOS to 14.04 you should get a better performance.
June 17, 2014, 10:54:09 AM
Having issues on BAMT 1.6.2 and my R9 290's, both the engine and memclock will constantly adjust even though I put in a hard number. The memclock goes from 1250 to 150mhzandone, card stays at 150 resulting in a reset everyday. Anyone else having this problem?
June 17, 2014, 12:47:55 AM
Still Linux hashrate 20% lower.
For 7790 X13 algo:
800-1000kHs versus 1120Khs stable on Windows 8.1
Changing intensity=17 to xintensity=156 rised hashs to 900-1120Khs. But its not stable yet.
For 7790 X13 algo:
800-1000kHs versus 1120Khs stable on Windows 8.1
Changing intensity=17 to xintensity=156 rised hashs to 900-1120Khs
. But its not stable yet.Differences between OSes are probably due to the version of the Driver. Check if you are using the same drivers on linux and windows. (and make sure you remove all the .bin files generated by the miner before running it again).
June 16, 2014, 04:06:04 PM
Still Linux hashrate 20% lower.
For 7790 X13 algo:
800-1000kHs versus 1120Khs stable on Windows 8.1
Changing intensity=17 to xintensity=156 rised hashs to 900-1120Khs. But its not stable yet.
For 7790 X13 algo:
800-1000kHs versus 1120Khs stable on Windows 8.1
Changing intensity=17 to xintensity=156 rised hashs to 900-1120Khs
. But its not stable yet.Differences between OSes are probably due to the version of the Driver. Check if you are using the same drivers on linux and windows. (and make sure you remove all the .bin files generated by the miner before running it again).
June 16, 2014, 12:30:53 AM
Still Linux hashrate 20% lower.
For 7790 X13 algo:
800-1000kHs versus 1120Khs stable on Windows 8.1
Changing intensity=17 to xintensity=156 rised hashs to 900-1120Khs. But its not stable yet.
For 7790 X13 algo:
800-1000kHs versus 1120Khs stable on Windows 8.1
Changing intensity=17 to xintensity=156 rised hashs to 900-1120Khs
. But its not stable yet. June 09, 2014, 10:06:19 PM
whats the aveg. for 280x on your x13 miner ?
i use your 2% miner on x11 and im realy satisfied, hope you squeeze even more out of them soon.
reason i cant test myself is that my rigs are rented for whole week, and im realy interested whats the hash speed now
cheers
i use your 2% miner on x11 and im realy satisfied, hope you squeeze even more out of them soon.
reason i cant test myself is that my rigs are rented for whole week, and im realy interested whats the hash speed now
cheers
It will depend on how much Over Clock your board will support. People are reporting 6% speed increase compared with lasybears version. I measured about 4% on mine.
June 09, 2014, 06:35:54 PM
Guys i'm on Windows 8.1 with 2x290
i get HW errors 1-5 and not any accepted shares. Mh/s do climb to 3.0+ on both.
what can cause this? scrypt and scrypt-n is mining ok. just changed to these 2x290, i had 2x280x before and i changed the conf accordingly
thanks
EDIT: x11 not working aswell. HW 1 error. mh/s are ok
"intensity" : "18",
"vector" : "1",
"worksize" : "256",
"kernel" : "x13mod",
"thread-concurrency" : "32765",
"lookup-gap" : "2",
"gpu-threads" : "1",
"gpu-clock" : "947",
"gpu-memclock" : "0-1250"
i get HW errors 1-5 and not any accepted shares. Mh/s do climb to 3.0+ on both.
what can cause this? scrypt and scrypt-n is mining ok. just changed to these 2x290, i had 2x280x before and i changed the conf accordingly
thanks
EDIT: x11 not working aswell. HW 1 error. mh/s are ok
"intensity" : "18",
"vector" : "1",
"worksize" : "256",
"kernel" : "x13mod",
"thread-concurrency" : "32765",
"lookup-gap" : "2",
"gpu-threads" : "1",
"gpu-clock" : "947",
"gpu-memclock" : "0-1250"
This is not the right thread. My miner does not support ""kernel" " options. Each algorithm has it's own miner. please refer to the right thread or use my miner (slightly faster on x13, more stable, but charges a 1% fee on x13 and a 2% fee on x11). See first post.
whats the aveg. for 280x on your x13 miner ?
i use your 2% miner on x11 and im realy satisfied, hope you squeeze even more out of them soon.
reason i cant test myself is that my rigs are rented for whole week, and im realy interested whats the hash speed now
cheers
Jump to: