Topic: [ANN][X11] X11/Darkcoin Gpu Miner - updated to use leaked binaries - even faster - page 30. (Read 102461 times)
May 21, 2014, 05:34:47 AM
Why --gpu-vddc don't work on Windows?
May 21, 2014, 05:28:40 AM
Can't seem to get cgwatcher
Get Cygcurl-4.dll error.
Not sure how to set the path
Get Cygcurl-4.dll error.
Not sure how to set the path
add this:
set PATH=%PATH%;./dlls
set TERMINFO=.\dlls\terminfo
to the start of the .bat file
I don't have a Bat file, Cgwatcher does it for me. do I stick that in ''Miner Arguments'' or to the conf.file?
Just run 'run.bat' which comes with sgminer and dll files while your CGWatcher is on, it will detect and ask you whether to set the running sgminer as another Profile ? Then make a profile and edit it.
CGWatcher Won't detect the profile when its running...
Delete your (not-working) kirino-sphsgminer profile first, then run "run.bat".
let it run few seconds, accept some shares then close it.
CGWatcher should pop up "'Profile not found' The miner that is currently running is not used in any profiles, would you like to create a profile for it now"
Where would I Find ''Delete your (not-working) kirino-sphsgminer profile first''
As I am runnning CGWatcher 1.35
Just downloaded and installed 1.38, that has no profiles.
And won't detect SGminer working
May 21, 2014, 05:07:57 AM
Not stable miner. Crushes, no temp&fan control (Win7+8).. back to Sgh miner.
OP we waiting for sources - peoples can help with temp and fan, in other case - it`s another auto-dev-donator like was on smelter`s quark.
5 hours. No crush. Will update stable len later.OP we waiting for sources - peoples can help with temp and fan, in other case - it`s another auto-dev-donator like was on smelter`s quark.
Upd: Still no crush.
May 21, 2014, 05:02:37 AM
Can't seem to get cgwatcher
Get Cygcurl-4.dll error.
Not sure how to set the path
Get Cygcurl-4.dll error.
Not sure how to set the path
add this:
set PATH=%PATH%;./dlls
set TERMINFO=.\dlls\terminfo
to the start of the .bat file
I don't have a Bat file, Cgwatcher does it for me. do I stick that in ''Miner Arguments'' or to the conf.file?
Just run 'run.bat' which comes with sgminer and dll files while your CGWatcher is on, it will detect and ask you whether to set the running sgminer as another Profile ? Then make a profile and edit it.
CGWatcher Won't detect the profile when its running...
Delete your (not-working) kirino-sphsgminer profile first, then run "run.bat".
let it run few seconds, accept some shares then close it.
CGWatcher should pop up "'Profile not found' The miner that is currently running is not used in any profiles, would you like to create a profile for it now"
May 21, 2014, 04:53:39 AM
Not stable miner. Crushes, no temp&fan control (Win7+8).. back to Sgh miner.
OP we waiting for sources - peoples can help with temp and fan, in other case - it`s another auto-dev-donator like was on smelter`s quark.
OP we waiting for sources - peoples can help with temp and fan, in other case - it`s another auto-dev-donator like was on smelter`s quark.
This miner crashes a lot.
May 21, 2014, 04:45:01 AM
Not stable miner. Crushes, no temp&fan control (Win7+8).. back to Sgh miner.
OP we waiting for sources - peoples can help with temp and fan, in other case - it`s another auto-dev-donator like was on smelter`s quark.
OP we waiting for sources - peoples can help with temp and fan, in other case - it`s another auto-dev-donator like was on smelter`s quark.
May 21, 2014, 04:30:56 AM
Can't seem to get cgwatcher
Get Cygcurl-4.dll error.
Not sure how to set the path
Get Cygcurl-4.dll error.
Not sure how to set the path
add this:
set PATH=%PATH%;./dlls
set TERMINFO=.\dlls\terminfo
to the start of the .bat file
I don't have a Bat file, Cgwatcher does it for me. do I stick that in ''Miner Arguments'' or to the conf.file?
Just run 'run.bat' which comes with sgminer and dll files while your CGWatcher is on, it will detect and ask you whether to set the running sgminer as another Profile ? Then make a profile and edit it.
CGWatcher Won't detect the profile when its running...
May 21, 2014, 04:14:41 AM
Can't seem to get cgwatcher
Get Cygcurl-4.dll error.
Not sure how to set the path
Get Cygcurl-4.dll error.
Not sure how to set the path
add this:
set PATH=%PATH%;./dlls
set TERMINFO=.\dlls\terminfo
to the start of the .bat file
I don't have a Bat file, Cgwatcher does it for me. do I stick that in ''Miner Arguments'' or to the conf.file?
Just run 'run.bat' which comes with sgminer and dll files while your CGWatcher is on, it will detect and ask you whether to set the running sgminer as another Profile ? Then make a profile and edit it.
May 21, 2014, 03:38:27 AM
Can't seem to get cgwatcher
Get Cygcurl-4.dll error.
Not sure how to set the path
Get Cygcurl-4.dll error.
Not sure how to set the path
add this:
set PATH=%PATH%;./dlls
set TERMINFO=.\dlls\terminfo
to the start of the .bat file
I don't have a Bat file, Cgwatcher does it for me. do I stick that in ''Miner Arguments'' or to the conf.file?
May 21, 2014, 03:34:31 AM
Can't seem to get cgwatcher
Get Cygcurl-4.dll error.
Not sure how to set the path
Get Cygcurl-4.dll error.
Not sure how to set the path
add this:
set PATH=%PATH%;./dlls
set TERMINFO=.\dlls\terminfo
to the start of the .bat file
I don't have a Bat file, Cgwatcher does it for me. do I stick that in ''Miner Arguments'' or to the conf.file?
May 21, 2014, 03:32:14 AM
Can't seem to get cgwatcher
Get Cygcurl-4.dll error.
Not sure how to set the path
Get Cygcurl-4.dll error.
Not sure how to set the path
add this:
set PATH=%PATH%;./dlls
set TERMINFO=.\dlls\terminfo
to the start of the .bat file
May 21, 2014, 03:20:55 AM
https://www.dropbox.com/sh/zhfbr8xh6zw0gi0/AAATwfkebZL4vZbo0S38Q5YYa/x11-sgminer-win-cygwin64-build1.zip
temperatures don'tn work - win 7 - 64
temperatures don'tn work - win 7 - 64
Sorry my bad, I downloaded the wrong version
Looks like the mingw version has proper fan control. May 21, 2014, 03:19:43 AM
Can't seem to get cgwatcher working
Get Cygcurl-4.dll error.
Not sure how to set the path
Get Cygcurl-4.dll error.
Not sure how to set the path
May 21, 2014, 03:11:50 AM
A full night mining a know pool and definitely went from 10.5mh/ to 15mh/s from 5x 280x's, same temps, haven't checked consumption still.
CGWatcher does fine monitoring, pool the sane, around 15mh.
Problem is SGwatcher crashes sgminer everytime it tries to switch to girino's pool.
CGWatcher does fine monitoring, pool the sane, around 15mh.
Problem is SGwatcher crashes sgminer everytime it tries to switch to girino's pool.
May 21, 2014, 03:06:01 AM
5970 from 2.4mh/s to 2.72mh/s
270x from 1.2mh/s to 1.88mh/s
not bad
270x from 1.2mh/s to 1.88mh/s
not bad
May 21, 2014, 02:44:30 AM
Is there any performance difference in the new version? or just the temps reading?
May 21, 2014, 02:43:30 AM
Good work! But I unlock 2% fee when I see the source code... Until 2% = 0%.
Sorry.
Sorry.
apparently you can remove it with IFMI Pool Manager, a guy said so some post above
May 21, 2014, 02:27:40 AM
I was able to drop the 2% fee using ...
Originally it loads a Pool 0 with a set p2p pool and quota. ... showed a fair share of accepted/rejected for this pool. Once I ran the steps below I'm at 600 accepted for my pool1 and 0 accepted shares for the fee Pool0
...
Originally it loads a Pool 0 with a set p2p pool and quota. ... showed a fair share of accepted/rejected for this pool. Once I ran the steps below I'm at 600 accepted for my pool1 and 0 accepted shares for the fee Pool0
...
Quoted for epicness
So, colleagues, There is alot of ways to deny pool 0, but are you really need it? It's only 2% not 20, not 10, not even 5 (like xpm devs). please remove your messages, in other case i think dev won't work for optimization couse he cant get profit...
May 21, 2014, 02:26:16 AM
Good work! But I unlock 2% fee when I see the source code... Until 2% = 0%.
Sorry.
Sorry.
May 21, 2014, 02:02:38 AM
Nice work. Now if you could only make it faster! My 280x's are at 65C and the fans are barely spinninng.
Jump to: