[ANN][YAC] YACoin ongoing development - page 114.

Joe_Bauers

hero member

Activity: 802

Merit: 1003

GCVMMWH

Quote from: anonymous_acc on November 01, 2013, 10:39:08 AM

Code:

$ make -f makefile.unix 
/bin/sh ../share/genbuild.sh obj/build.h
gcc -c -O3 -msse2 -pthread -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -I/usr/src/coins/yacoin/src -I/usr/src/coins/yacoin/src/obj -DUSE_UPNP=0 -DUSE_IPV6=1 -DSCRYPT_KECCAK512 -DSCRYPT_CHACHA -DSCRYPT_CHOOSE_COMPILETIME -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2  -MMD -o obj/scrypt-jane.o scrypt-jane/scrypt-jane.c
scrypt-jane/scrypt-jane.c:10:8: error: expected identifier or ‘(’ before string constant
make: *** [obj/scrypt-jane.o] Error 1

Could some body provide me with true flags to build this coin?

You can probably use this as a starting point: https://github.com/yacoin/yacoin/blob/master/src/makefile.mingw

anonymous_acc

sr. member

Activity: 322

Merit: 250

Code:

$ make -f makefile.unix 
/bin/sh ../share/genbuild.sh obj/build.h
gcc -c -O3 -msse2 -pthread -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -I/usr/src/coins/yacoin/src -I/usr/src/coins/yacoin/src/obj -DUSE_UPNP=0 -DUSE_IPV6=1 -DSCRYPT_KECCAK512 -DSCRYPT_CHACHA -DSCRYPT_CHOOSE_COMPILETIME -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2  -MMD -o obj/scrypt-jane.o scrypt-jane/scrypt-jane.c
scrypt-jane/scrypt-jane.c:10:8: error: expected identifier or ‘(’ before string constant
make: *** [obj/scrypt-jane.o] Error 1

Could some body provide me with true flags to build this coin?

BChydro

hero member

Activity: 1426

Merit: 506

Quote from: ivanlabrie on October 25, 2013, 10:47:53 PM

Quote from: Beave162 on October 25, 2013, 06:54:16 PM

Anyone mining this thing on a cloud?

Probably some botnet guy...I have yet to found a profitable vps provider for mining.

I doubt there are any botnets YAC mining. It's more profitable to CPU mine QRK or XPM. I'm guessing most of the YAC network is still GPU farms.

ivanlabrie

hero member

Activity: 812

Merit: 1000

Quote from: Beave162 on October 25, 2013, 06:54:16 PM

Anyone mining this thing on a cloud?

Probably some botnet guy...I have yet to found a profitable vps provider for mining.

Beave162

hero member

Activity: 809

Merit: 501

Anyone mining this thing on a cloud?

Joe_Bauers

hero member

Activity: 802

Merit: 1003

GCVMMWH

Quote from: ivanlabrie on October 23, 2013, 01:17:43 AM

Quote from: bitdwarf on October 23, 2013, 12:54:43 AM

You can get today more YAC for a fraction of a BTC that I got mining at launch. Entry point is now as fair as it gets.

Yeah, +1...price is too darn cheap right now, and me without btc. :/

No doubt. The most annoying thing about the current price to me is that I don't have BTC to buy more YAC's

ivanlabrie

hero member

Activity: 812

Merit: 1000

Quote from: bitdwarf on October 23, 2013, 12:54:43 AM

You can get today more YAC for a fraction of a BTC that I got mining at launch. Entry point is now as fair as it gets.

Yeah, +1...price is too darn cheap right now, and me without btc. :/

bitdwarf

sr. member

Activity: 406

Merit: 250

The cryptocoin watcher

You can get today more YAC for a fraction of a BTC that I got mining at launch. Entry point is now as fair as it gets.

ivanlabrie

hero member

Activity: 812

Merit: 1000

Quote from: ?? on ??

Quote from: ivanlabrie on October 22, 2013, 06:58:51 PM

Quote from: BChydro on October 22, 2013, 04:05:15 PM

Quote from: bitdwarf on October 22, 2013, 09:14:32 AM

Only PoS and low intensity CPU mining here.

Is YAC CPU mining as profitable as XPM mining?

Not sure, I just hold and mint pos atm...yac used to be more profitable than anything, for a long long time, but few people knew.

"premine" sure.

huh!?

I was talking recently, not at the beggining of the coin's life.

darksoft

sr. member

Activity: 275

Merit: 250

Quote from: BChydro on October 22, 2013, 03:50:37 PM

Quote from: darksoft on October 21, 2013, 07:26:35 PM

Quote from: BChydro on October 21, 2013, 03:35:57 PM

How is everyone doing with GPU mining? I feel like I'm trying to dig holes with a tooth brush. HW errors are out of control, but I can't crank the thread concurrency too high or the GPUs become unstable. Best I can do is about 7.6 diff 1 shares/min per 7950. Can anyone do any better?

yacminer --scrypt -w 256 -I 11 --lookup-gap 2 -o http://yacp.coinmine.pl:8088 -u myusername -p mypassword --thread-concurrency 41216

yields appx 9k/sec on my 7950's...

Do you get any HW errors? After accounting for HW errors I get 8.3 kh/s per card. I can't seem to crank my TC that high when lookup gap is only 2, maybe it's because I use WF3s with the lower voltage FW.

No HW errors, that's why my intensity is at 11... I only need turn down intensity during each N change...

ivanlabrie

hero member

Activity: 812

Merit: 1000

Quote from: BChydro on October 22, 2013, 04:05:15 PM

Quote from: bitdwarf on October 22, 2013, 09:14:32 AM

Only PoS and low intensity CPU mining here.

Is YAC CPU mining as profitable as XPM mining?

Not sure, I just hold and mint pos atm...yac used to be more profitable than anything, for a long long time, but few people knew.

bitdwarf

sr. member

Activity: 406

Merit: 250

The cryptocoin watcher

I don't care, I'm not a coinhopper.

BChydro

hero member

Activity: 1426

Merit: 506

Quote from: bitdwarf on October 22, 2013, 09:14:32 AM

Only PoS and low intensity CPU mining here.

Is YAC CPU mining as profitable as XPM mining?

BChydro

hero member

Activity: 1426

Merit: 506

Quote from: darksoft on October 21, 2013, 07:26:35 PM

Quote from: BChydro on October 21, 2013, 03:35:57 PM

How is everyone doing with GPU mining? I feel like I'm trying to dig holes with a tooth brush. HW errors are out of control, but I can't crank the thread concurrency too high or the GPUs become unstable. Best I can do is about 7.6 diff 1 shares/min per 7950. Can anyone do any better?

yacminer --scrypt -w 256 -I 11 --lookup-gap 2 -o http://yacp.coinmine.pl:8088 -u myusername -p mypassword --thread-concurrency 41216

yields appx 9k/sec on my 7950's...

Do you get any HW errors? After accounting for HW errors I get 8.3 kh/s per card. I can't seem to crank my TC that high when lookup gap is only 2, maybe it's because I use WF3s with the lower voltage FW.

Joe_Bauers

hero member

Activity: 802

Merit: 1003

GCVMMWH

Quote from: bitdwarf on October 22, 2013, 09:34:56 AM

I tried to compile WindMaster's last code, but src/scrypt-jane/scrypt-jane.c is wrapped into a extern "C" block that makes it fail. This block wasn't in the older versions, and commenting it out let me compile. Could this be a bug?

No sorry, I just didn't push the latest code to override the extern if compiling the Qt client. It's updated now.

Code:

#if !defined( QT_GUI )
extern "C" {
#endif

bitdwarf

sr. member

Activity: 406

Merit: 250

The cryptocoin watcher

I tried to compile WindMaster's last code, but src/scrypt-jane/scrypt-jane.c is wrapped into a extern "C" block that makes it fail. This block wasn't in the older versions, and commenting it out let me compile. Could this be a bug?

bitdwarf

sr. member

Activity: 406

Merit: 250

The cryptocoin watcher

Only PoS and low intensity CPU mining here.

aso118

legendary

Activity: 1918

Merit: 1012

★Nitrogensports.eu★

Anyone mining with 7970's? And care to share their settings? I'm only getting about 4.5-5 khash/s on each of my cards. Undecided

ivanlabrie

hero member

Activity: 812

Merit: 1000

Quote from: darksoft on October 21, 2013, 07:26:35 PM

Quote from: BChydro on October 21, 2013, 03:35:57 PM

How is everyone doing with GPU mining? I feel like I'm trying to dig holes with a tooth brush. HW errors are out of control, but I can't crank the thread concurrency too high or the GPUs become unstable. Best I can do is about 7.6 diff 1 shares/min per 7950. Can anyone do any better?

yacminer --scrypt -w 256 -I 11 --lookup-gap 2 -o http://yacp.coinmine.pl:8088 -u myusername -p mypassword --thread-concurrency 41216

yields appx 9k/sec on my 7950's...

Gonna try that with my next card/s.
Thanks!

darksoft

sr. member

Activity: 275

Merit: 250

Quote from: BChydro on October 21, 2013, 03:35:57 PM

How is everyone doing with GPU mining? I feel like I'm trying to dig holes with a tooth brush. HW errors are out of control, but I can't crank the thread concurrency too high or the GPUs become unstable. Best I can do is about 7.6 diff 1 shares/min per 7950. Can anyone do any better?

yacminer --scrypt -w 256 -I 11 --lookup-gap 2 -o http://yacp.coinmine.pl:8088 -u myusername -p mypassword --thread-concurrency 41216

yields appx 9k/sec on my 7950's...

Topic: [ANN][YAC] YACoin ongoing development - page 114. (Read 379983 times)