Ok, its August now Bitmain. You said you'd have news about S1 and S2 upgrades in August.
What's the news ?
What's the news ?
BitMain said ..."August / September..."...
Sounds like more like first week of October to me...If we get lucky...
ZiG
Topic: ANTMINER S2 Discussion and Support Thread - page 21. (Read 355730 times)
BitMain said ..."August / September..."...
Sounds like more like first week of October to me...If we get lucky...
ZiG
Ok, its August now Bitmain. You said you'd have news about S1 and S2 upgrades in August.
What's the news ?
What's the news ?
Elapsed GH/S(5s) GH/S(avg) FoundBlocks Getworks Accepted Rejected HW Utility Discarded Stale LocalWork WU DiffA DiffR DiffS BestShare
17h29s 1070.89 1002.87 0 1426 13907 13 14968 13.63 813603 0 16752462 14009.91 14240768 115712 0 0
17h29s 1070.89 1002.87 0 1426 13907 13 14968 13.63 813603 0 16752462 14009.91 14240768 115712 0 0
looks good....GH, WU
ck says to ignore discarded shares
HW error just 0.104%
best share is sometimes not reported at all on some machines
I freak out, never saw more than 300 errors.
Thanks, will start calculating now based on that.
finally....... thanks !!
Elapsed GH/S(5s) GH/S(avg) FoundBlocks Getworks Accepted Rejected HW Utility Discarded Stale LocalWork WU DiffA DiffR DiffS BestShare
17h29s 1070.89 1002.87 0 1426 13907 13 14968 13.63 813603 0 16752462 14009.91 14240768 115712 0 0
17h29s 1070.89 1002.87 0 1426 13907 13 14968 13.63 813603 0 16752462 14009.91 14240768 115712 0 0
looks good....GH, WU
ck says to ignore discarded shares
HW error just 0.104%
best share is sometimes not reported at all on some machines
Elapsed GH/S(5s) GH/S(avg) FoundBlocks Getworks Accepted Rejected HW Utility Discarded Stale LocalWork WU DiffA DiffR DiffS BestShare
17h29s 1070.89 1002.87 0 1426 13907 13 14968 13.63 813603 0 16752462 14009.91 14240768 115712 0 0
17h29s 1070.89 1002.87 0 1426 13907 13 14968 13.63 813603 0 16752462 14009.91 14240768 115712 0 0
Can't find the way to paste the image here 
Lot of errors
Can't see any of your images. But I imagine that miner is broken, could sell it and try some s3's.
Lot of errors
My S2 was working fine for a week in eligius, after a payment delay decide to try Ghash, coincidence or not the HW errors went to sky, any suggestion?
I figured it out. Put in on btcguild and see what happens.
My S2 was working fine for a week in eligius, after a payment delay decide to try Ghash, coincidence or not the HW errors went to sky, any suggestion?
sick of a B4 rig that wont stop dwindling down to 8xx i started pulling cards out and checking the thermal paste.
so far 4 out of 4 have been absolutely terrible.
right now with those 4 redone, i am seeing 11xx instead of 8xx
i did not restart or reboot, just pulled the blade, did the job, stuck it back in.
i will continue doing the remaining 6 when i have some time but thought some of you might appreciate a heads up.
Also, while only running 9 blades i saw 980GH/s pretty stable (about 20 minutes to remove, cool, brush, unscrew, reapply etc)
so far 4 out of 4 have been absolutely terrible.
right now with those 4 redone, i am seeing 11xx instead of 8xx
i did not restart or reboot, just pulled the blade, did the job, stuck it back in.
i will continue doing the remaining 6 when i have some time but thought some of you might appreciate a heads up.
Also, while only running 9 blades i saw 980GH/s pretty stable (about 20 minutes to remove, cool, brush, unscrew, reapply etc)
Are you serious - popping boards in and out of a running system doesn't make the whole thing blow up? sounds very risky, no?
Placed an order of 6x S2 Antminers on 2014-06-16 and received 5 of them, but after more than 45 days one of them is never received!!!
All sent by EMS, I contacted local EMS and claimed for the shipment and contacted Bitmain to check with their local EMS several times but absolutely no results yet!
This is the EMS tracking number results after so long time:
I don't know what should I do!!!! 
All sent by EMS, I contacted local EMS and claimed for the shipment and contacted Bitmain to check with their local EMS several times but absolutely no results yet!
This is the EMS tracking number results after so long time:
I don't know what should I do!!!!
A short good news for the S2 buyer is that we will let the S2 to upgrade to 1.8TH/s or 2TH/s at very low cost which you can only image now in the August or September.
Could you please tell us will this upgrade require PSU replacement with more powerful unit? If so, what will be your recommendation about PSU power? Bitmain, any updates on the S2 upgrade option as discussed? A lot of us have paid a high amount of BTC/GHs for these, (at least I) with the understanding we will have options to increase hashing power very soon.
Right now the S3 is their priority ... as their online advert says "The S3 is selling like hot cakes". They are making big time right now on just one product.
I'm sure they will at some time bring S2 updates out, but I wonder if you would make ROI after including the initial purchase price ... and maybe you would need to purchase a better PSU to raise an S2 to 2TH/s+ ??. The S4 (or whatever it gets called) might be interesting, but I've decided to sell my S2's and wait. Somehow it feels safer, hopefully keeping ahead of the difficulty curve.
Bitmain, any updates on the S2 upgrade option as discussed? A lot of us have paid a high amount of BTC/GHs for these, (at least I) with the understanding we will have options to increase hashing power very soon.
sick of a B4 rig that wont stop dwindling down to 8xx i started pulling cards out and checking the thermal paste.
so far 4 out of 4 have been absolutely terrible.
right now with those 4 redone, i am seeing 11xx instead of 8xx
i did not restart or reboot, just pulled the blade, did the job, stuck it back in.
i will continue doing the remaining 6 when i have some time but thought some of you might appreciate a heads up.
Also, while only running 9 blades i saw 980GH/s pretty stable (about 20 minutes to remove, cool, brush, unscrew, reapply etc)
My trouble machine has be running at about 950 for a week, so I'm afraid to pull it out and reapply paste. Let us know the long term effect and I'll do it, though. so far 4 out of 4 have been absolutely terrible.
right now with those 4 redone, i am seeing 11xx instead of 8xx
i did not restart or reboot, just pulled the blade, did the job, stuck it back in.
i will continue doing the remaining 6 when i have some time but thought some of you might appreciate a heads up.
Also, while only running 9 blades i saw 980GH/s pretty stable (about 20 minutes to remove, cool, brush, unscrew, reapply etc)
And with Kano firmware will hit 3 th?
No, that's an erroneous reading. The S2 cannot hit 3TH.
Jump to: