Omg ))
Topic: ANTMINER S3+ Discussion and Support Thread - page 44. (Read 710241 times)
Omg ))
*Edited message as it took up 1/2 page.
It appears to be at default speed so I don't think that is a issue. If it keeps coming back when doing reboot with it off for a few minutes there is a good chance it is just a dead chip. You can't really fix a dead chip
Some might try to flash firmware and see if it fixes it (chances are it wont). With reading your post's and your luck I would not suggest going firmware route.
No dont change . What is problem this x ? Why is low ghs ? What do i ?
It appears to be at default speed so I don't think that is a issue. If it keeps coming back when doing reboot with it off for a few minutes there is a good chance it is just a dead chip. You can't really fix a dead chip
Some might try to flash firmware and see if it fixes it (chances are it wont). With reading your post's and your luck I would not suggest going firmware route.
Okey i will make s3 rebot ,
You told me that chip is destroy ?
*Edited message as it took up 1/2 page.
It appears to be at default speed so I don't think that is a issue. If it keeps coming back when doing reboot with it off for a few minutes there is a good chance it is just a dead chip. You can't really fix a dead chip
Some might try to flash firmware and see if it fixes it (chances are it wont). With reading your post's and your luck I would not suggest going firmware route.
No dont change . What is problem this x ? Why is low ghs ? What do i ?
It appears to be at default speed so I don't think that is a issue. If it keeps coming back when doing reboot with it off for a few minutes there is a good chance it is just a dead chip. You can't really fix a dead chip
Some might try to flash firmware and see if it fixes it (chances are it wont). With reading your post's and your luck I would not suggest going firmware route.
If the miner runs non stop turn off your miner and turn it back on to see if you still get that x
no , i turn off miner and turn on but same ghs But when it comes back does it still have the X on the one chip? That is what really matters. (I cleaned up post so not so large)
what is X ?
On the asic status at bottom right. It's next to signature. If you cant find it just upload image.
You are starting to look spammy again just a FYI.
What are it X doing?
It's a chip not working right I think someone mentioned it a page ago. On status is there still a X in it?
is any problem ?
is any problem ?
Power off the miner for 5 minutes then restart it and see if the 'x' changes back to 'o'.
No dont change .
What is problem this x ?
Why is low ghs ?
What do i ?
If the miner runs non stop turn off your miner and turn it back on to see if you still get that x
no , i turn off miner and turn on but same ghs But when it comes back does it still have the X on the one chip? That is what really matters. (I cleaned up post so not so large)
what is X ?
On the asic status at bottom right. It's next to signature. If you cant find it just upload image.
You are starting to look spammy again just a FYI.
What are it X doing?
It's a chip not working right I think someone mentioned it a page ago. On status is there still a X in it?
is any problem ?
is any problem ?
Power off the miner for 5 minutes then restart it and see if the 'x' changes back to 'o'.
so im still having problems getting my one antminer s3+ and two s3's up and hashing after factory default resets. Every time i try and download the latest frimware, it appears to take to my mac but not on the antminers themselves. Anyone have a guide or a quick bit of some help to offer in that regard?? I have all three antminers on my network and connected to the mining pool the the miner status screen still looks as if it has the default worker login info in the boxes...... 
1) download firmware
2) log into miner
3) go to system, and select update firmware
4) follow prompts
5) update complete
There no "take to your mac" involved, not sure what you're getting at there. Make sure your pool information is entered on the config screen.
If the miner runs non stop turn off your miner and turn it back on to see if you still get that x
no , i turn off miner and turn on but same ghs But when it comes back does it still have the X on the one chip? That is what really matters. (I cleaned up post so not so large)
What do i ? How turn on second chip ?
Alone chip problem is ?
so im still having problems getting my one antminer s3+ and two s3's up and hashing after factory default resets. Every time i try and download the latest frimware, it appears to take to my mac but not on the antminers themselves. Anyone have a guide or a quick bit of some help to offer in that regard?? I have all three antminers on my network and connected to the mining pool the the miner status screen still looks as if it has the default worker login info in the boxes......
What do you mean by "Every time i try and download the latest frimware, it appears to take to my mac but not on the antminers themselves"? On firmware be VERY careful but downloading it to your mac will not update the miner. You would have to download to mac then update miner through web interface.
What happens when you put in your pool / user and click apply? Does it save it in configuration page?
Firmware here
https://bitmaintech.com/support.htm?pid=007201407180243004432lBQW28O0633
There should be an manual with firmware on bitmain website. refer to manual.
https://bitmaintech.com/files/download/Antminer%20S3%20Manual_EN_2014.7.16.pdf
so im still having problems getting my one antminer s3+ and two s3's up and hashing after factory default resets. Every time i try and download the latest frimware, it appears to take to my mac but not on the antminers themselves. Anyone have a guide or a quick bit of some help to offer in that regard?? I have all three antminers on my network and connected to the mining pool the the miner status screen still looks as if it has the default worker login info in the boxes......
What do you mean by "Every time i try and download the latest frimware, it appears to take to my mac but not on the antminers themselves"? On firmware be VERY careful but downloading it to your mac will not update the miner. You would have to download to mac then update miner through web interface.
What happens when you put in your pool / user and click apply? Does it save it in configuration page?
If the miner runs non stop turn off your miner and turn it back on to see if you still get that x
no , i turn off miner and turn on but same ghs But when it comes back does it still have the X on the one chip? That is what really matters. (I cleaned up post so not so large)
what is X ?
On the asic status at bottom right. It's next to signature. If you cant find it just upload image.
You are starting to look spammy again just a FYI.
What are it X doing?
It's a chip not working right I think someone mentioned it a page ago. On status is there still a X in it?
is any problem ?
is any problem ?
so im still having problems getting my one antminer s3+ and two s3's up and hashing after factory default resets. Every time i try and download the latest frimware, it appears to take to my mac but not on the antminers themselves. Anyone have a guide or a quick bit of some help to offer in that regard?? I have all three antminers on my network and connected to the mining pool the the miner status screen still looks as if it has the default worker login info in the boxes......
If the miner runs non stop turn off your miner and turn it back on to see if you still get that x
no , i turn off miner and turn on but same ghs But when it comes back does it still have the X on the one chip? That is what really matters. (I cleaned up post so not so large)
what is X ?
On the asic status at bottom right. It's next to signature. If you cant find it just upload image.
You are starting to look spammy again just a FYI.
What are it X doing?
It's a chip not working right I think someone mentioned it a page ago. On status is there still a X in it?
is any problem ?
If the miner runs non stop turn off your miner and turn it back on to see if you still get that x
no , i turn off miner and turn on but same ghs But when it comes back does it still have the X on the one chip? That is what really matters. (I cleaned up post so not so large)
what is X ?
On the asic status at bottom right. It's next to signature. If you cant find it just upload image.
You are starting to look spammy again just a FYI.
What are it X doing?
It's a chip not working right I think someone mentioned it a page ago. On status is there still a X in it?
If the miner runs non stop turn off your miner and turn it back on to see if you still get that x
no , i turn off miner and turn on but same ghs But when it comes back does it still have the X on the one chip? That is what really matters. (I cleaned up post so not so large)
what is X ?
On the asic status at bottom right. It's next to signature. If you cant find it just upload image.
You are starting to look spammy again just a FYI.
What are it X doing?
If the miner runs non stop turn off your miner and turn it back on to see if you still get that x
no , i turn off miner and turn on but same ghs But when it comes back does it still have the X on the one chip? That is what really matters. (I cleaned up post so not so large)
what is X ?
On the asic status at bottom right. It's next to **temperature. If you cant find it just upload image.
You are starting to look spammy again just a FYI.
If the miner runs non stop turn off your miner and turn it back on to see if you still get that x
no , i turn off miner and turn on but same ghs But when it comes back does it still have the X on the one chip? That is what really matters. (I cleaned up post so not so large)
what is X ?
If the miner runs non stop turn off your miner and turn it back on to see if you still get that x
no , i turn off miner and turn on but same ghs But when it comes back does it still have the X on the one chip? That is what really matters. (I cleaned up post so not so large)
Your hashrate dropped because one of the chips has stopped. It is the one with an X instead of an O, in the GUI.
thanks , this i undertood.
is any problem that i will overclock my s3 ?
it could be a sign of a bad power supply..
if you have x's at default speed, it will get worse if you try to overclock.
i have this pUS >
what will do i ?
https://www.google.com/search?client=opera&hs=uRP&biw=1920&bih=971&tbm=isch&sa=1&q=cooler+master+psu+thunder+700W&oq=cooler+master+psu+thunder+700W&gs_l=img.3...365.1092.0.1228.0.0.0.0.0.0.0.0..0.0.msedr...0...1c.1.64.img..0.0.0.aoa0h9Uxcjs#imgrc=redRjYIzK6hU8M%253A%3BbSs6hzYu8TORsM%3Bhttp%253A%252F%252Fi.ytimg.com%252Fvi%252F8v5mHcZtUKY%252Fmaxresdefault.jpg%3Bhttp%253A%252F%252Fwww.youtube.com%252Fwatch%253Fv%253D8v5mHcZtUKY%3B1920%3B1080
If the miner runs non stop turn off your miner and turn it back on to see if you still get that x
no , i turn off miner and turn on but same ghs
Your hashrate dropped because one of the chips has stopped. It is the one with an X instead of an O, in the GUI.
thanks , this i undertood.
is any problem that i will overclock my s3 ?
it could be a sign of a bad power supply..
if you have x's at default speed, it will get worse if you try to overclock.
i have this pUS >
what will do i ?
https://www.google.com/search?client=opera&hs=uRP&biw=1920&bih=971&tbm=isch&sa=1&q=cooler+master+psu+thunder+700W&oq=cooler+master+psu+thunder+700W&gs_l=img.3...365.1092.0.1228.0.0.0.0.0.0.0.0..0.0.msedr...0...1c.1.64.img..0.0.0.aoa0h9Uxcjs#imgrc=redRjYIzK6hU8M%253A%3BbSs6hzYu8TORsM%3Bhttp%253A%252F%252Fi.ytimg.com%252Fvi%252F8v5mHcZtUKY%252Fmaxresdefault.jpg%3Bhttp%253A%252F%252Fwww.youtube.com%252Fwatch%253Fv%253D8v5mHcZtUKY%3B1920%3B1080
If the miner runs non stop turn off your miner and turn it back on to see if you still get that x
my s3 ofter from 440GHS 350 GHS prior to drop .
why ?
why ?
We need more info. What pool are you mining on, how often does it happen?
Also if you could show configuration page, and status page when it happens that would help us be able to see what's happening.
As of now we cant say much to help.
Right now little is increase
It appears you did something wrong is setting up pool 2 and 3, this can explain the hashing rate loss. Anytime you have a problem connecting to pool 1, the miner will sit around and do nothing.
Also the diff on pool 1 is 1024, this mean hashrate will swing a lot. You might see hashrates of 250-650, in the 5s average. In the pic the accepts was small, so you may need to wait an hour to see what the true hashrate average is. But. fix things first.
Will remove pool 1 and pool 2 that will increase pool 1 ghs ?
lol make sure you have a live back up pool because one pool goes down an your miner thats how your losing hashs. If you simply just remove them nothing will change.
how ?
Jump to: