hmmmmm ok so i keep doing this but it doesent seem to change from .0.0.0.0
http://postimg.org/image/s05evk981/cb94797c/
Topic: ANTMINER S3+ Discussion and Support Thread - page 41. (Read 710241 times)
yes but you cant leave domain name server 0.0.0.0
make it 8.8.8.8
http://postimg.org/image/vdn08d6jd/671d88f1/
i belive this shows its already set a .2 correct?
and idk if you can pick this up or not... but where it says lan and wan setup in my netgear router.... those two options are not actually clickable hyperlinks... i cant access that page :/
http://postimg.org/image/kxi11bj6r/
i belive this shows its already set a .2 correct?
and idk if you can pick this up or not... but where it says lan and wan setup in my netgear router.... those two options are not actually clickable hyperlinks... i cant access that page :/
http://postimg.org/image/kxi11bj6r/
yeah but you dont want to keep it dhcp as it could change and throw off your whole network.
so set it static, and keep that ip and gateway and subnet.
under dns make it 8.8.8.8
ok done
re pinging and such would be next step yes? headed to try that now... still looks to be showing same connection status
hmm still bad adress on ping and same story on nslookup
http://postimg.org/image/e2m6ijmtt/3798cafa/
you have to reboot everything.. to make the ips all match up.
http://postimg.org/image/vdn08d6jd/671d88f1/
i belive this shows its already set a .2 correct?
and idk if you can pick this up or not... but where it says lan and wan setup in my netgear router.... those two options are not actually clickable hyperlinks... i cant access that page :/
http://postimg.org/image/kxi11bj6r/
i belive this shows its already set a .2 correct?
and idk if you can pick this up or not... but where it says lan and wan setup in my netgear router.... those two options are not actually clickable hyperlinks... i cant access that page :/
http://postimg.org/image/kxi11bj6r/
yeah but you dont want to keep it dhcp as it could change and throw off your whole network.
so set it static, and keep that ip and gateway and subnet.
under dns make it 8.8.8.8
ok done
re pinging and such would be next step yes? headed to try that now... still looks to be showing same connection status
hmm still bad adress on ping and same story on nslookup
http://postimg.org/image/e2m6ijmtt/3798cafa/
something appears to have changed here however
http://postimg.org/image/qizo5q17j/76c47bfd/
http://postimg.org/image/vdn08d6jd/671d88f1/
i belive this shows its already set a .2 correct?
and idk if you can pick this up or not... but where it says lan and wan setup in my netgear router.... those two options are not actually clickable hyperlinks... i cant access that page :/
http://postimg.org/image/kxi11bj6r/
i belive this shows its already set a .2 correct?
and idk if you can pick this up or not... but where it says lan and wan setup in my netgear router.... those two options are not actually clickable hyperlinks... i cant access that page :/
http://postimg.org/image/kxi11bj6r/
yeah but you dont want to keep it dhcp as it could change and throw off your whole network.
so set it static, and keep that ip and gateway and subnet.
under dns make it 8.8.8.8
http://postimg.org/image/vdn08d6jd/671d88f1/
i belive this shows its already set a .2 correct?
and idk if you can pick this up or not... but where it says lan and wan setup in my netgear router.... those two options are not actually clickable hyperlinks... i cant access that page :/
http://postimg.org/image/kxi11bj6r/
i belive this shows its already set a .2 correct?
and idk if you can pick this up or not... but where it says lan and wan setup in my netgear router.... those two options are not actually clickable hyperlinks... i cant access that page :/
http://postimg.org/image/kxi11bj6r/
happily!
im struggling to get you pictures easy enough to understand as well..... this is a big mess more or less I can unplug everything unnecessary as well alot of stuffs plugged in rn...but obviously im trying to solve this one at a time.......
so from the port labeled internet on my netgear i have it connected to the first port on my comcast.... are you saying switch that so it doesent go into the designated internet port on netgear? jus run comcast into one of the general lan ports??
https://mail.google.com/mail/u/0/?ui=2&ik=b04ade0cad&view=att&th=14d0afaa8edac208&attid=0.1&disp=safe&zw
https://mail.google.com/mail/u/0/?ui=2&ik=b04ade0cad&view=att&th=14d0afaa8edac208&attid=0.3&disp=safe&zw
https://mail.google.com/mail/u/0/?ui=2&ik=b04ade0cad&view=att&th=14d0afaa8edac208&attid=0.5&disp=safe&zw
https://mail.google.com/mail/u/0/?ui=2&ik=b04ade0cad&view=att&th=14d0afaa8edac208&attid=0.7&disp=safe&zw
hopefully the format of those pics is acceptable if you dont wanna dl them i completley understand ill reformat in postimage jus let me kno....
I realize how comical this setup probably looks to.... lol... with that ghetto ass supercharger fan setup i have... but yea
im struggling to get you pictures easy enough to understand as well..... this is a big mess more or less I can unplug everything unnecessary as well alot of stuffs plugged in rn...but obviously im trying to solve this one at a time.......
so from the port labeled internet on my netgear i have it connected to the first port on my comcast.... are you saying switch that so it doesent go into the designated internet port on netgear? jus run comcast into one of the general lan ports??
https://mail.google.com/mail/u/0/?ui=2&ik=b04ade0cad&view=att&th=14d0afaa8edac208&attid=0.1&disp=safe&zw
https://mail.google.com/mail/u/0/?ui=2&ik=b04ade0cad&view=att&th=14d0afaa8edac208&attid=0.3&disp=safe&zw
https://mail.google.com/mail/u/0/?ui=2&ik=b04ade0cad&view=att&th=14d0afaa8edac208&attid=0.5&disp=safe&zw
https://mail.google.com/mail/u/0/?ui=2&ik=b04ade0cad&view=att&th=14d0afaa8edac208&attid=0.7&disp=safe&zw
hopefully the format of those pics is acceptable if you dont wanna dl them i completley understand ill reformat in postimage jus let me kno....
I realize how comical this setup probably looks to.... lol... with that ghetto ass supercharger fan setup i have... but yea
ok i cant see your mail attachments but YES, you cant have 2 internet WAN ports connected together..
ok so lets make your LAN work.
is your comcast a modem or a router? im guessing since your comcast has an IP its a router..
so lets hook it up like this..
COMCAST to LAN1 on the netgear..
S3 to LAN2 on the netgear.
leave the internet port on the netgear open. im sure there is a spot in the ui that says something like assign lan to wan, but we can work on that later.
in the netgear router, under LAN..
assign it ip 192.168.1.2 < this is important as the comcast and netgear cant have the same ip.
also turn off DHCP server on the netgear, you cant have 2 and the comcast one should be enabled by default.
you might have to reboot the netgear router for these changes.
happily!
im struggling to get you pictures easy enough to understand as well..... this is a big mess more or less I can unplug everything unnecessary as well alot of stuffs plugged in rn...but obviously im trying to solve this one at a time.......
so from the port labeled internet on my netgear i have it connected to the first port on my comcast.... are you saying switch that so it doesent go into the designated internet port on netgear? jus run comcast into one of the general lan ports??
https://mail.google.com/mail/u/0/?ui=2&ik=b04ade0cad&view=att&th=14d0afaa8edac208&attid=0.1&disp=safe&zw
https://mail.google.com/mail/u/0/?ui=2&ik=b04ade0cad&view=att&th=14d0afaa8edac208&attid=0.3&disp=safe&zw
https://mail.google.com/mail/u/0/?ui=2&ik=b04ade0cad&view=att&th=14d0afaa8edac208&attid=0.5&disp=safe&zw
https://mail.google.com/mail/u/0/?ui=2&ik=b04ade0cad&view=att&th=14d0afaa8edac208&attid=0.7&disp=safe&zw
hopefully the format of those pics is acceptable if you dont wanna dl them i completley understand ill reformat in postimage jus let me kno....
I realize how comical this setup probably looks to.... lol... with that ghetto ass supercharger fan setup i have... but yea
im struggling to get you pictures easy enough to understand as well..... this is a big mess more or less I can unplug everything unnecessary as well alot of stuffs plugged in rn...but obviously im trying to solve this one at a time.......
so from the port labeled internet on my netgear i have it connected to the first port on my comcast.... are you saying switch that so it doesent go into the designated internet port on netgear? jus run comcast into one of the general lan ports??
https://mail.google.com/mail/u/0/?ui=2&ik=b04ade0cad&view=att&th=14d0afaa8edac208&attid=0.1&disp=safe&zw
https://mail.google.com/mail/u/0/?ui=2&ik=b04ade0cad&view=att&th=14d0afaa8edac208&attid=0.3&disp=safe&zw
https://mail.google.com/mail/u/0/?ui=2&ik=b04ade0cad&view=att&th=14d0afaa8edac208&attid=0.5&disp=safe&zw
https://mail.google.com/mail/u/0/?ui=2&ik=b04ade0cad&view=att&th=14d0afaa8edac208&attid=0.7&disp=safe&zw
hopefully the format of those pics is acceptable if you dont wanna dl them i completley understand ill reformat in postimage jus let me kno....
I realize how comical this setup probably looks to.... lol... with that ghetto ass supercharger fan setup i have... but yea
it was... I bought a netgear router in the midst of all this thinking that would help so as of now since ultimately id like to have a few of these up and running im just trying to set them all up through that as opposed to my comcast router
heres a few screeens from that gui
http://postimg.org/image/4ctzauvx7/49a5c4a5/
http://postimg.org/image/h339l2a6z/7405386b/
ok i think i understand now.. so you got something like this..
S3 (ip 192.168.1.5) > netgear router (ip 192.168.1.2) > comcast router (ip 192.168.1.1) > internet?
if this is the case, im also guessing you plugged the comcast router into the "internet" part of the netgear router.. this wont work.. replug that cat5e into a regular lan port..
can you take a pic of how you got everything connected..
it might could be something else is using the IP?
how do you have the s3 connected?
you have more then one s3?
try pushing the nslookup button and seeing what that says.
heres what i got
if i did it right?
http://postimg.org/image/yspqf6maf/29ea310d/
yeah its not finding internet..
let me see your computers network status.
in windows 7 go into network and sharing, then change adapter settings, then right click and choose status, then hit details.
heres the real mindblower.......
Im on a mac :/ lol
and at that a pre-2010 mac book air with no ehthernet port to connect via a one to one setting
yea i have three
but only the one im trying to get up and runnng is powered on and such at the moment......
this is my network settings tab i have more info under advanced to if this doesent tell you enough( which i feel like it couldent possibly) lol
http://postimg.org/image/dt6nn8idx/62c5c8b9/
ok thats not a problem. perhaps your router can give some answers.. can you log into 192.168.1.1?
im guessing the s3 is plugged directly into the router?
it was... I bought a netgear router in the midst of all this thinking that would help so as of now since ultimately id like to have a few of these up and running im just trying to set them all up through that as opposed to my comcast router
heres a few screeens from that gui
http://postimg.org/image/4ctzauvx7/49a5c4a5/
http://postimg.org/image/h339l2a6z/7405386b/
the 1.1. is my comcast router.
1.4 is my macbook air i beilve
1.5 is my one were troubleshooting
and the 67. adress is the new default it shot one box two when i connected two on network at the .99 adress.... i just have to default reset that one at the point im ready to bring it back online.... if that info helps at all
it might could be something else is using the IP?
how do you have the s3 connected?
you have more then one s3?
try pushing the nslookup button and seeing what that says.
heres what i got
if i did it right?
http://postimg.org/image/yspqf6maf/29ea310d/
yeah its not finding internet..
let me see your computers network status.
in windows 7 go into network and sharing, then change adapter settings, then right click and choose status, then hit details.
heres the real mindblower.......
Im on a mac :/ lol
and at that a pre-2010 mac book air with no ehthernet port to connect via a one to one setting
yea i have three
but only the one im trying to get up and runnng is powered on and such at the moment......
this is my network settings tab i have more info under advanced to if this doesent tell you enough( which i feel like it couldent possibly) lol
http://postimg.org/image/dt6nn8idx/62c5c8b9/
ok thats not a problem. perhaps your router can give some answers.. can you log into 192.168.1.1?
im guessing the s3 is plugged directly into the router?
it might could be something else is using the IP?
how do you have the s3 connected?
you have more then one s3?
try pushing the nslookup button and seeing what that says.
heres what i got
if i did it right?
http://postimg.org/image/yspqf6maf/29ea310d/
yeah its not finding internet..
let me see your computers network status.
in windows 7 go into network and sharing, then change adapter settings, then right click and choose status, then hit details.
heres the real mindblower.......
Im on a mac :/ lol
and at that a pre-2010 mac book air with no ehthernet port to connect via a one to one setting
yea i have three
but only the one im trying to get up and runnng is powered on and such at the moment......
this is my network settings tab i have more info under advanced to if this doesent tell you enough( which i feel like it couldent possibly) lol
http://postimg.org/image/dt6nn8idx/62c5c8b9/
it might could be something else is using the IP?
how do you have the s3 connected?
you have more then one s3?
try pushing the nslookup button and seeing what that says.
yea i have three
but only the one im trying to get up and runnng is powered on and such at the moment......
heres what i got
if i did it right?
http://postimg.org/image/yspqf6maf/29ea310d/
yeah its not finding internet..
let me see your computers network status.
in windows 7 go into network and sharing, then change adapter settings, then right click and choose status, then hit details.
it might could be something else is using the IP?
how do you have the s3 connected?
you have more then one s3?
try pushing the nslookup button and seeing what that says.
yea i have three
but only the one im trying to get up and runnng is powered on and such at the moment......
heres what i got
if i did it right?
http://postimg.org/image/yspqf6maf/29ea310d/
it might could be something else is using the IP?
how do you have the s3 connected?
you have more then one s3?
try pushing the nslookup button and seeing what that says.
sorry I did uncheck it and the same result here
http://postimg.org/image/5b3l2rwmx/197cdd35/
i think i just took that screenshot before but i went back right after and hit unable dhcp
does that all look right?
http://postimg.org/image/5b3l2rwmx/197cdd35/
i think i just took that screenshot before but i went back right after and hit unable dhcp
does that all look right?
yeah, now go back to diagnostic and put the pool in and hit ping.
sorry I did uncheck it and the same result here
http://postimg.org/image/5b3l2rwmx/197cdd35/
i think i just took that screenshot before but i went back right after and hit unable dhcp
does that all look right?
http://postimg.org/image/5b3l2rwmx/197cdd35/
i think i just took that screenshot before but i went back right after and hit unable dhcp
does that all look right?
ON THE WAN TAB..
ok turn it off DHCP and put it on static, then input these numbers
IPv4 address 192.168.1.5
ipv4 netmask 255.255.255.0
ipv4 gateway 192.168.1.1
ipv4 broadcast 192.168.1.255
custom DNS servers 8.8.8.8
then check the box that says disable the dhcp.
hit save and apply.
on the LAN TAB leave it on dhcp client. dont change anything on the LAN tabs..
ok turn it off DHCP and put it on static, then input these numbers
IPv4 address 192.168.1.5
ipv4 netmask 255.255.255.0
ipv4 gateway 192.168.1.1
ipv4 broadcast 192.168.1.255
custom DNS servers 8.8.8.8
then check the box that says disable the dhcp.
hit save and apply.
on the LAN TAB leave it on dhcp client. dont change anything on the LAN tabs..
ok here we go
http://postimg.org/image/icvik43dr/3e78d579/
http://postimg.org/image/x581gl42l/75c991c5/
you didnt check the bottom box to disable dhcp
Jump to: