I am giving some $100 coupons away for the s-7.
2 per id pm me if you want 1 or 2 coupons .
Topic: ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH - page 16. (Read 528110 times)
May 04, 2016, 12:11:29 AM
May 03, 2016, 10:55:30 PM
@Prelude,
Colorado can do factory level repair, however, it is fee based. Can you send email to [email protected] with photos of front and back of the PCB that need repair? Do you see any visual burn or smell of something melted?
Repair cost and possibility of repair is unknown until fully diagnosed. If half the PCB is burnt, we probably can not fix that but may have to offer you the replacement!!
Colorado can do factory level repair, however, it is fee based. Can you send email to [email protected] with photos of front and back of the PCB that need repair? Do you see any visual burn or smell of something melted?
Repair cost and possibility of repair is unknown until fully diagnosed. If half the PCB is burnt, we probably can not fix that but may have to offer you the replacement!!
May 03, 2016, 09:40:57 PM
firmware wise, please update when you have to (need to), other wise, let it be. Leave Ants Alone if it is working for you!
Glad to see you posting again. Can you handle returns on defective S7 hash boards in Colorado, or do they need to be sent to China? (1X defective B8, 2X defective B1)
I've personally sent parts to Colorado for repair. They do a great job and are awesome to work with.
May 03, 2016, 09:28:17 PM
firmware wise, please update when you have to (need to), other wise, let it be. Leave Ants Alone if it is working for you!
Glad to see you posting again. Can you handle returns on defective S7 hash boards in Colorado, or do they need to be sent to China? (1X defective B8, 2X defective B1)
May 03, 2016, 08:30:15 PM
.
How to get out from Antminer S7 controller B.B.B. software ?
File System Version - Tue Sep 15 16:50:19 CST 2015
It still works great with the 6 x S7 blades.
This version has never been downloadable from Bitmain page.
How to get out from Antminer S7 controller B.B.B. software ?
File System Version - Tue Sep 15 16:50:19 CST 2015
It still works great with the 6 x S7 blades.
This version has never been downloadable from Bitmain page.
how are you guys obtaining these extra blades? can you buy an io board from s5+ and just spare blades? cause they arent listed in bitmains page.
i have confirmed an unpowered and unplugged hashing board does not appear in miner status page, no --- just not existant so logic would dictate adding a board is the matter of just plugging it in.. or there would be a decent chance of this working.
what about cooling?
It wont let me update the firmware cause it wont let me access the gui after a few minutes (maybe 2 minutes)
have you tried unplugging the boards power and data cable so just the io board and bb are plugged in to network and power? they are all that need the update really.
May 03, 2016, 08:06:16 PM
firmware wise, please update when you have to (need to), other wise, let it be. Leave Ants Alone if it is working for you!
It wont let me update the firmware cause it wont let me access the gui after a few minutes (maybe 2 minutes)
May 03, 2016, 07:44:45 PM
Received my first S7-F1 today. Unfortunately it arrived DOA. Not off to a good start with the single fan units.
May 03, 2016, 07:07:21 PM
In the interest of safety, I was thinking about changing the point at which the S7 stops from 80 Celsius down to something like 70 Celsius. Has anyone come across where that value of 80 is stored?
I found some stuff in /config that was close, but not it. I really don't want to do a grep of 80 on the entire filesystem or anything else like that
I found some stuff in /config that was close, but not it. I really don't want to do a grep of 80 on the entire filesystem or anything else like that
May 03, 2016, 06:12:47 PM
firmware wise, please update when you have to (need to), other wise, let it be. Leave Ants Alone if it is working for you!
May 03, 2016, 05:01:58 PM
You should update to the latest firmware on all your S7 miners as soon as possible.
May 03, 2016, 12:52:47 PM
Possible to take some pictures what the S7 is doing?
Thank you!
Thank you!
Hi guys, i have bought several s7 in the last months, but im having problems with one of them
The miner sometimes try to powerup, it shows the green and orange led, and the red led behind the lan port, but then it stop flashing the lights, and sometimes just stop, doesnt do anything else. Sometimes it doesnt power up at all, or just powerup and stop flashing the lights
I dont know what to think, it was working fine, then this happened. (i had never tried to update it)
What can i do?
Greetings to all
The miner sometimes try to powerup, it shows the green and orange led, and the red led behind the lan port, but then it stop flashing the lights, and sometimes just stop, doesnt do anything else. Sometimes it doesnt power up at all, or just powerup and stop flashing the lights
I dont know what to think, it was working fine, then this happened. (i had never tried to update it)
What can i do?
Greetings to all
Will do that today, maybe i should upload a video?
And no, ive never updated the firmware, i always try to apply "if its working fine dont fix it"
May 03, 2016, 11:55:31 AM
Hi guys, i have bought several s7 in the last months, but im having problems with one of them
The miner sometimes try to powerup, it shows the green and orange led, and the red led behind the lan port, but then it stop flashing the lights, and sometimes just stop, doesnt do anything else. Sometimes it doesnt power up at all, or just powerup and stop flashing the lights
I dont know what to think, it was working fine, then this happened. (i had never tried to update it)
What can i do?
Greetings to all
The miner sometimes try to powerup, it shows the green and orange led, and the red led behind the lan port, but then it stop flashing the lights, and sometimes just stop, doesnt do anything else. Sometimes it doesnt power up at all, or just powerup and stop flashing the lights
I dont know what to think, it was working fine, then this happened. (i had never tried to update it)
What can i do?
Greetings to all
Are you running the latest firmware?
May 03, 2016, 08:27:54 AM
Possible to take some pictures what the S7 is doing?
Thank you!
Thank you!
Hi guys, i have bought several s7 in the last months, but im having problems with one of them
The miner sometimes try to powerup, it shows the green and orange led, and the red led behind the lan port, but then it stop flashing the lights, and sometimes just stop, doesnt do anything else. Sometimes it doesnt power up at all, or just powerup and stop flashing the lights
I dont know what to think, it was working fine, then this happened. (i had never tried to update it)
What can i do?
Greetings to all
The miner sometimes try to powerup, it shows the green and orange led, and the red led behind the lan port, but then it stop flashing the lights, and sometimes just stop, doesnt do anything else. Sometimes it doesnt power up at all, or just powerup and stop flashing the lights
I dont know what to think, it was working fine, then this happened. (i had never tried to update it)
What can i do?
Greetings to all
May 03, 2016, 08:01:44 AM
Hi guys, i have bought several s7 in the last months, but im having problems with one of them
The miner sometimes try to powerup, it shows the green and orange led, and the red led behind the lan port, but then it stop flashing the lights, and sometimes just stop, doesnt do anything else. Sometimes it doesnt power up at all, or just powerup and stop flashing the lights
I dont know what to think, it was working fine, then this happened. (i had never tried to update it)
What can i do?
Greetings to all
The miner sometimes try to powerup, it shows the green and orange led, and the red led behind the lan port, but then it stop flashing the lights, and sometimes just stop, doesnt do anything else. Sometimes it doesnt power up at all, or just powerup and stop flashing the lights
I dont know what to think, it was working fine, then this happened. (i had never tried to update it)
What can i do?
Greetings to all
May 03, 2016, 04:50:46 AM
Hey guys,
Anyone got $100 coupons?
Need 3 coupons only asap gonna order more miners.
Thanks
Anyone got $100 coupons?
Need 3 coupons only asap gonna order more miners.
Thanks
PM me your Bitmain ID and I will send you some.
May 03, 2016, 04:15:40 AM
.
How to get out from Antminer S7 controller B.B.B. software ?
File System Version - Tue Sep 15 16:50:19 CST 2015
It still works great with the 6 x S7 blades.
This version has never been downloadable from Bitmain page.
.
How to get out from Antminer S7 controller B.B.B. software ?
File System Version - Tue Sep 15 16:50:19 CST 2015
It still works great with the 6 x S7 blades.
This version has never been downloadable from Bitmain page.
.
May 03, 2016, 04:08:08 AM
Thank you Tupsu.
Tupsu I know you did a lot with running multiple blades with one controller and if I remember correctly you mentioned the October firmware is the most recent you can run more than three with. Is that correct?
Yes. They working with 6 blades until 22 April.
Now, only 15 september firmware works with 6 blades.
I have left only 5 x 6 blades Antminer S7
The other is all with own controller and aprilll 2016 firmware.
May 03, 2016, 02:34:50 AM
damn s7 so heavy it will cost alot of money for international shipping
May 03, 2016, 12:55:00 AM
Software update!
Man, such a pain for the s7... and they fuck up the miner with the s7- from batch 8 on(and the previous batch with less chips)
..........
Man, such a pain for the s7... and they fuck up the miner with the s7- from batch 8 on(and the previous batch with less chips)
..........
May 03, 2016, 12:32:45 AM
Does anyone know what`s new in the 20.04 update ?
Jump to: