@philipma1957,
Please check your mail!!
Please check your mail!!
I sent a reply this morning. I was tired last night.
Topic: ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH - page 19. (Read 528110 times)
April 26, 2016, 06:47:33 AM
I sent a reply this morning. I was tired last night.
April 26, 2016, 06:47:04 AM
it was the FAN sensor!
although running like a freight train, the single fan shipped with my new S7 had a bad sensor so showed null fan speed, which apparently kept cgminer from hashing.
swapped in an old s3 fan and under clocked a bunch to maintain temps and she is happily hashing away.
450Mhz getting a hair over 3TH/s from most recent batch.
does anyone think bitrmain will somehow compensate me if i send in the old fan? aside from sending me a replacement?
i ordered a bunch of parts for some trial and error troubleshooting on my own accord, but i am really only concerned with the two weeks of mining i missed out on.
although running like a freight train, the single fan shipped with my new S7 had a bad sensor so showed null fan speed, which apparently kept cgminer from hashing.
swapped in an old s3 fan and under clocked a bunch to maintain temps and she is happily hashing away.
450Mhz getting a hair over 3TH/s from most recent batch.
does anyone think bitrmain will somehow compensate me if i send in the old fan? aside from sending me a replacement?
i ordered a bunch of parts for some trial and error troubleshooting on my own accord, but i am really only concerned with the two weeks of mining i missed out on.
That's why i bought a spare factory fan at my last purchase!!!
Has anyone purchased and received the new ANTMINER S7 BATCH 16 with One Fan? If so, let us know the stats on this machine, especially temps.
I have found that the batch 12 run about 10 degrees calculus hotter than previous models. Does anyone else see this same condition?
I have found that the batch 12 run about 10 degrees calculus hotter than previous models. Does anyone else see this same condition?
Yesterday i purchased a Batch16 S7 with a second FAN thanks to your coupon
As sson as i get it, i'll post the performance with SINGLEFAN usage and DUALFAN usage
Great Information. I bought a couple of the B16s and am hoping not to have this issue. I am really curious about the temperature in comparison to the other batches.
April 26, 2016, 01:59:36 AM
it was the FAN sensor!
although running like a freight train, the single fan shipped with my new S7 had a bad sensor so showed null fan speed, which apparently kept cgminer from hashing.
swapped in an old s3 fan and under clocked a bunch to maintain temps and she is happily hashing away.
450Mhz getting a hair over 3TH/s from most recent batch.
does anyone think bitrmain will somehow compensate me if i send in the old fan? aside from sending me a replacement?
i ordered a bunch of parts for some trial and error troubleshooting on my own accord, but i am really only concerned with the two weeks of mining i missed out on.
although running like a freight train, the single fan shipped with my new S7 had a bad sensor so showed null fan speed, which apparently kept cgminer from hashing.
swapped in an old s3 fan and under clocked a bunch to maintain temps and she is happily hashing away.
450Mhz getting a hair over 3TH/s from most recent batch.
does anyone think bitrmain will somehow compensate me if i send in the old fan? aside from sending me a replacement?
i ordered a bunch of parts for some trial and error troubleshooting on my own accord, but i am really only concerned with the two weeks of mining i missed out on.
That's why i bought a spare factory fan at my last purchase!!!
Has anyone purchased and received the new ANTMINER S7 BATCH 16 with One Fan? If so, let us know the stats on this machine, especially temps.
I have found that the batch 12 run about 10 degrees calculus hotter than previous models. Does anyone else see this same condition?
I have found that the batch 12 run about 10 degrees calculus hotter than previous models. Does anyone else see this same condition?
Yesterday i purchased a Batch16 S7 with a second FAN thanks to your coupon
As sson as i get it, i'll post the performance with SINGLEFAN usage and DUALFAN usage
April 25, 2016, 11:00:21 PM
i've set it to 60% to account for warmer days.. its currently room temperature and the miner is steady at 62 for chain one.. and mid/high 50's for the other chains..
would love to start playing with under volting but after two weeks sitting idle waiting on new parts from china its finally running and i don't want to brick it.
fan rpm is 2880 btw.
would love to start playing with under volting but after two weeks sitting idle waiting on new parts from china its finally running and i don't want to brick it.
fan rpm is 2880 btw.
2880rpm with the old S1/S3 fan is very quiet. Its what the Antminer S3 ran on average at my place when it was 25C ambient.
Also the S3 had dual fans and not just one fan.
The S3 used like less than 400 watts and the S7 uses like 1200 watts, how is it possible to move 3 times the wattage with the same type of fan?
Do you know how much wattage you are using from the wall ?
April 25, 2016, 10:18:47 PM
@philipma1957,
Please check your mail!!
Please check your mail!!
I will check it in a bit.
Thanks.
April 25, 2016, 10:10:05 PM
@philipma1957,
Please check your mail!!
Please check your mail!!
April 25, 2016, 08:00:26 PM
i've set it to 60% to account for warmer days.. its currently room temperature and the miner is steady at 62 for chain one.. and mid/high 50's for the other chains..
would love to start playing with under volting but after two weeks sitting idle waiting on new parts from china its finally running and i don't want to brick it.
fan rpm is 2880 btw.
would love to start playing with under volting but after two weeks sitting idle waiting on new parts from china its finally running and i don't want to brick it.
fan rpm is 2880 btw.
April 25, 2016, 07:52:33 PM
it was the FAN sensor!
although running like a freight train, the single fan shipped with my new S7 had a bad sensor so showed null fan speed, which apparently kept cgminer from hashing.
swapped in an old s3 fan and under clocked a bunch to maintain temps and she is happily hashing away.
450Mhz getting a hair over 3TH/s from most recent batch.
does anyone think bitrmain will somehow compensate me if i send in the old fan? aside from sending me a replacement?
i ordered a bunch of parts for some trial and error troubleshooting on my own accord, but i am really only concerned with the two weeks of mining i missed out on.
although running like a freight train, the single fan shipped with my new S7 had a bad sensor so showed null fan speed, which apparently kept cgminer from hashing.
swapped in an old s3 fan and under clocked a bunch to maintain temps and she is happily hashing away.
450Mhz getting a hair over 3TH/s from most recent batch.
does anyone think bitrmain will somehow compensate me if i send in the old fan? aside from sending me a replacement?
i ordered a bunch of parts for some trial and error troubleshooting on my own accord, but i am really only concerned with the two weeks of mining i missed out on.
What temps are you getting with your old S3 fan ? How fast is that fan running, doesn't seem like it can provide enough airflow.
April 25, 2016, 07:31:45 PM
it was the FAN sensor!
although running like a freight train, the single fan shipped with my new S7 had a bad sensor so showed null fan speed, which apparently kept cgminer from hashing.
swapped in an old s3 fan and under clocked a bunch to maintain temps and she is happily hashing away.
450Mhz getting a hair over 3TH/s from most recent batch.
does anyone think bitrmain will somehow compensate me if i send in the old fan? aside from sending me a replacement?
i ordered a bunch of parts for some trial and error troubleshooting on my own accord, but i am really only concerned with the two weeks of mining i missed out on.
although running like a freight train, the single fan shipped with my new S7 had a bad sensor so showed null fan speed, which apparently kept cgminer from hashing.
swapped in an old s3 fan and under clocked a bunch to maintain temps and she is happily hashing away.
450Mhz getting a hair over 3TH/s from most recent batch.
does anyone think bitrmain will somehow compensate me if i send in the old fan? aside from sending me a replacement?
i ordered a bunch of parts for some trial and error troubleshooting on my own accord, but i am really only concerned with the two weeks of mining i missed out on.
April 25, 2016, 10:42:59 AM
Can you at least make it to the login page or the initial password screen, then to this main page with blank data?
If so, you have a few options
1st be to factory reset the S7 with a paperclip. There is a pin hole next to the Ethernet connector and use a paperclip and press and hold the button for about 10 seconds and let it go and wait for about 30 seconds and then physically reboot the S7. This may restore it to the factory default setting.
If this does not help, you may want to go find 8gb microSD card, and create a bootable MicroSD card and insert it into the microSD slot of the S7 and power it off and power it back on. Let the S7 complete the boot process and if possible, let it run as is for about 5 minutes then your Beagle Bone Black may be restored to the factory default setting.
Image and Imaging Tool:
https://bitmaintech.com/support.htm?pid=007201604120945219855QObfk20066C
If none of these works, your Beagle Bone Black or the Control PCB may be damaged.
Nice to see you returnIf so, you have a few options
1st be to factory reset the S7 with a paperclip. There is a pin hole next to the Ethernet connector and use a paperclip and press and hold the button for about 10 seconds and let it go and wait for about 30 seconds and then physically reboot the S7. This may restore it to the factory default setting.
If this does not help, you may want to go find 8gb microSD card, and create a bootable MicroSD card and insert it into the microSD slot of the S7 and power it off and power it back on. Let the S7 complete the boot process and if possible, let it run as is for about 5 minutes then your Beagle Bone Black may be restored to the factory default setting.
Image and Imaging Tool:
https://bitmaintech.com/support.htm?pid=007201604120945219855QObfk20066C
If none of these works, your Beagle Bone Black or the Control PCB may be damaged.
Antminer S7 B10 not connecting to the setup page. Nothing is configurable, miner is inaccesible.
http://imgur.com/yDMsOzb
Someone told me they fixed this in a new firmware update. Is this true? Im afraid to do a firmware update and that my miner will brick.
http://imgur.com/yDMsOzb
Someone told me they fixed this in a new firmware update. Is this true? Im afraid to do a firmware update and that my miner will brick.
https://bitcointalksearch.org/topic/m.14645057
https://bitcointalksearch.org/topic/m.14644921
https://bitcointalksearch.org/topic/m.14644846
All April 23rd dates above.
and this is:
A Jan 14th date
https://bitcointalksearch.org/topic/m.13548650
So you have been gone for 100 days.
A) I hope you stick around and help people with s-7 gear.
B) please solve my s-7 batch 1 issue it under preformed and you never sent me any compensation for it.
C) based on the compensation you gave to us at li's group it should be 67 USD.
So send me
67 USD worth of BTC here is my address
1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje
I have talked to yoshi months ago and sent a lot of emails asking for this money
no money.
I even said send me a coupon when I buy my next s-7
I purchased 17 of them no coupon.
Do not say the 100 dollar coupon counts as it is not any bigger then the ones sent with out my bad batch 1
Frankly it would need to be a 167 dollar coupon not a 100.
I don't understand a company like yours . I gave you 50,000 usd in business I supported you gear. At this moment I am trying to help a few people with bad s-7s'
https://bitcointalksearch.org/topic/from-4750-to-3200-1423701
And you blew me off for 67 USD that is truly dumb on the part of your company. really bad business.
It has reached the point that I wrote some truly nasty posts.
That is not my nature. I rather you fix this issue for me then chase after you and other bitmaintech workers.
Good luck Phil on getting this resolved. I have been following this and am waiting to see if you get whats due to you.
It is truly amazingly terrible business on their part.
But this crypto coin business has had these type of issues.
Like the exchange vircurex. taking 167,000 dev coins from me about 0.007 btc
Never answering an email. So I stopped using them.
Meanwhile I have been a 3 ½ year customer with them. Paying close to .5 btc in fees with trades.
So for the sake of stealing my 167,000 dev coins from me worth 0.007 btc they will no longer get my steady business. which was worth .5 btc to them.
Truly dysfunctional business practice.
So my biggest problem now in the world of crypto coins is only one piece of gear for sha256 the Avalon 6.
So no gear gets purchased for now.
One less exchange to use. Vircurex (0.007 btc is cheap)
This kills coins most likely the actions above will slowly kill the game.
I sold off a lot of coins the last week and I will wind gear down for the summer.
April 25, 2016, 10:39:51 AM
Can you at least make it to the login page or the initial password screen, then to this main page with blank data?
If so, you have a few options
1st be to factory reset the S7 with a paperclip. There is a pin hole next to the Ethernet connector and use a paperclip and press and hold the button for about 10 seconds and let it go and wait for about 30 seconds and then physically reboot the S7. This may restore it to the factory default setting.
If this does not help, you may want to go find 8gb microSD card, and create a bootable MicroSD card and insert it into the microSD slot of the S7 and power it off and power it back on. Let the S7 complete the boot process and if possible, let it run as is for about 5 minutes then your Beagle Bone Black may be restored to the factory default setting.
Image and Imaging Tool:
https://bitmaintech.com/support.htm?pid=007201604120945219855QObfk20066C
If none of these works, your Beagle Bone Black or the Control PCB may be damaged.
If so, you have a few options
1st be to factory reset the S7 with a paperclip. There is a pin hole next to the Ethernet connector and use a paperclip and press and hold the button for about 10 seconds and let it go and wait for about 30 seconds and then physically reboot the S7. This may restore it to the factory default setting.
If this does not help, you may want to go find 8gb microSD card, and create a bootable MicroSD card and insert it into the microSD slot of the S7 and power it off and power it back on. Let the S7 complete the boot process and if possible, let it run as is for about 5 minutes then your Beagle Bone Black may be restored to the factory default setting.
Image and Imaging Tool:
https://bitmaintech.com/support.htm?pid=007201604120945219855QObfk20066C
If none of these works, your Beagle Bone Black or the Control PCB may be damaged.
Antminer S7 B10 not connecting to the setup page. Nothing is configurable, miner is inaccesible.
http://imgur.com/yDMsOzb
Someone told me they fixed this in a new firmware update. Is this true? Im afraid to do a firmware update and that my miner will brick.
http://imgur.com/yDMsOzb
Someone told me they fixed this in a new firmware update. Is this true? Im afraid to do a firmware update and that my miner will brick.
Ive tried resetting multiple times with no success, I can get to the login page but after 2-3 minutes I only get the blank page. I will try the bootable microSD option tomorrow and will report back. Thank you
April 25, 2016, 10:31:11 AM
step 1) release $100 off coupons to drum up new business
step 2) take down site which is responsible for confirming network connectivity in bitmain cgminer script so miners arrive doa
strep 3) await slew of foolish americans re-ordering parts to troubleshoot because they know support will take weeks to sort out any issues.
step 4) Profit!
anyone wanna buy some spare io and bb boards?
step 2) take down site which is responsible for confirming network connectivity in bitmain cgminer script so miners arrive doa
strep 3) await slew of foolish americans re-ordering parts to troubleshoot because they know support will take weeks to sort out any issues.
step 4) Profit!
anyone wanna buy some spare io and bb boards?
That code is only active in the older miners. I have a batch 8 with original Dec 2 firmware that has this code commented out so they haven't been selling miners with this issue in 5 months. Also the site in question never belonged to bitmain so they didn't take it down. It was (maybe still is) a DNS for a chinese ISP which is probably only used because it is easy to remember just like 8.8.8.8 in the US.
April 25, 2016, 04:30:01 AM
Can you at least make it to the login page or the initial password screen, then to this main page with blank data?
If so, you have a few options
1st be to factory reset the S7 with a paperclip. There is a pin hole next to the Ethernet connector and use a paperclip and press and hold the button for about 10 seconds and let it go and wait for about 30 seconds and then physically reboot the S7. This may restore it to the factory default setting.
If this does not help, you may want to go find 8gb microSD card, and create a bootable MicroSD card and insert it into the microSD slot of the S7 and power it off and power it back on. Let the S7 complete the boot process and if possible, let it run as is for about 5 minutes then your Beagle Bone Black may be restored to the factory default setting.
Image and Imaging Tool:
https://bitmaintech.com/support.htm?pid=007201604120945219855QObfk20066C
If none of these works, your Beagle Bone Black or the Control PCB may be damaged.
Nice to see you returnIf so, you have a few options
1st be to factory reset the S7 with a paperclip. There is a pin hole next to the Ethernet connector and use a paperclip and press and hold the button for about 10 seconds and let it go and wait for about 30 seconds and then physically reboot the S7. This may restore it to the factory default setting.
If this does not help, you may want to go find 8gb microSD card, and create a bootable MicroSD card and insert it into the microSD slot of the S7 and power it off and power it back on. Let the S7 complete the boot process and if possible, let it run as is for about 5 minutes then your Beagle Bone Black may be restored to the factory default setting.
Image and Imaging Tool:
https://bitmaintech.com/support.htm?pid=007201604120945219855QObfk20066C
If none of these works, your Beagle Bone Black or the Control PCB may be damaged.
Antminer S7 B10 not connecting to the setup page. Nothing is configurable, miner is inaccesible.
http://imgur.com/yDMsOzb
Someone told me they fixed this in a new firmware update. Is this true? Im afraid to do a firmware update and that my miner will brick.
http://imgur.com/yDMsOzb
Someone told me they fixed this in a new firmware update. Is this true? Im afraid to do a firmware update and that my miner will brick.
https://bitcointalksearch.org/topic/m.14645057
https://bitcointalksearch.org/topic/m.14644921
https://bitcointalksearch.org/topic/m.14644846
All April 23rd dates above.
and this is:
A Jan 14th date
https://bitcointalksearch.org/topic/m.13548650
So you have been gone for 100 days.
A) I hope you stick around and help people with s-7 gear.
B) please solve my s-7 batch 1 issue it under preformed and you never sent me any compensation for it.
C) based on the compensation you gave to us at li's group it should be 67 USD.
So send me
67 USD worth of BTC here is my address
1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje
I have talked to yoshi months ago and sent a lot of emails asking for this money
no money.
I even said send me a coupon when I buy my next s-7
I purchased 17 of them no coupon.
Do not say the 100 dollar coupon counts as it is not any bigger then the ones sent with out my bad batch 1
Frankly it would need to be a 167 dollar coupon not a 100.
I don't understand a company like yours . I gave you 50,000 usd in business I supported you gear. At this moment I am trying to help a few people with bad s-7s'
https://bitcointalksearch.org/topic/from-4750-to-3200-1423701
And you blew me off for 67 USD that is truly dumb on the part of your company. really bad business.
It has reached the point that I wrote some truly nasty posts.
That is not my nature. I rather you fix this issue for me then chase after you and other bitmaintech workers.
Good luck Phil on getting this resolved. I have been following this and am waiting to see if you get whats due to you.
April 25, 2016, 12:25:51 AM
S7 Hashboards - Voltage binning from factory?
RadekG's work on repairing regulated S7 hashboards after their PICs die (https://bitcointalksearch.org/topic/cheap-and-simple-repair-of-s7-hash-board-1420909) inspired me to investigate the hashboard voltage behavior a little, and I have initial evidence that the PIC and digital pot on the hashboards are used for voltage binning:
https://bitcointalksearch.org/topic/m.14655895
Pretty pictures are fun, so here's a teaser from that post:
I've only looked at three boards so far - 2 were set for 10.26V (pot value of 21) and 1 for 10.38V (pot value of 16). All three started up at 9.18 before the pot value was set.
RadekG's work on repairing regulated S7 hashboards after their PICs die (https://bitcointalksearch.org/topic/cheap-and-simple-repair-of-s7-hash-board-1420909) inspired me to investigate the hashboard voltage behavior a little, and I have initial evidence that the PIC and digital pot on the hashboards are used for voltage binning:
https://bitcointalksearch.org/topic/m.14655895
Pretty pictures are fun, so here's a teaser from that post:
I've only looked at three boards so far - 2 were set for 10.26V (pot value of 21) and 1 for 10.38V (pot value of 16). All three started up at 9.18 before the pot value was set.
April 24, 2016, 05:47:44 PM
step 1) release $100 off coupons to drum up new business
step 2) take down site which is responsible for confirming network connectivity in bitmain cgminer script so miners arrive doa
strep 3) await slew of foolish americans re-ordering parts to troubleshoot because they know support will take weeks to sort out any issues.
step 4) Profit!
anyone wanna buy some spare io and bb boards?
step 2) take down site which is responsible for confirming network connectivity in bitmain cgminer script so miners arrive doa
strep 3) await slew of foolish americans re-ordering parts to troubleshoot because they know support will take weeks to sort out any issues.
step 4) Profit!
anyone wanna buy some spare io and bb boards?
But this will slow the sale of s-7s.
I have to think it may not be planned
April 24, 2016, 05:10:10 PM
step 1) release $100 off coupons to drum up new business
step 2) take down site which is responsible for confirming network connectivity in bitmain cgminer script so miners arrive doa
strep 3) await slew of foolish americans re-ordering parts to troubleshoot because they know support will take weeks to sort out any issues.
step 4) Profit!
anyone wanna buy some spare io and bb boards?
step 2) take down site which is responsible for confirming network connectivity in bitmain cgminer script so miners arrive doa
strep 3) await slew of foolish americans re-ordering parts to troubleshoot because they know support will take weeks to sort out any issues.
step 4) Profit!
anyone wanna buy some spare io and bb boards?
April 24, 2016, 10:34:50 AM
So, today I rebooted all 6 of my S7 Batch 1 asic's. They had been up for 50 days since last reboot. They where all hashing before reboot.
The thing is, now none of them will hash.
I can't see any of the hashingboards under the "Miner Status" tab.
I've tried changing PSU's.
It's really weird that all of the machines stopped working at the same time.. after a reboot.
What to do? :S Any advice would be appreciated
Edit:
When you start or restart cgminer the cgminer.sh script (/etc/init.d/cgminer.sh) checks that the connectivity to 114.114.114.114 is up.
I guess it is a one of bitmain ip.
Today this IP (114.114.114.114) is down, so all of Bitmain gear (S3, S4, S5, and S7) will refuse to restart cgminer if you restart the miner or change your configuration.
If 114.114.114.114 is not up, the cgminer.sh script exits and does not start cgminer.
Seems like 114.114.114.114 is down.. hopefully this is the problem!
Edit 2:
This was the problem. Upgraded from oct to dec firmware, fixed it.
The thing is, now none of them will hash.
I can't see any of the hashingboards under the "Miner Status" tab.
I've tried changing PSU's.
It's really weird that all of the machines stopped working at the same time.. after a reboot.
What to do? :S Any advice would be appreciated
Edit:
When you start or restart cgminer the cgminer.sh script (/etc/init.d/cgminer.sh) checks that the connectivity to 114.114.114.114 is up.
I guess it is a one of bitmain ip.
Today this IP (114.114.114.114) is down, so all of Bitmain gear (S3, S4, S5, and S7) will refuse to restart cgminer if you restart the miner or change your configuration.
If 114.114.114.114 is not up, the cgminer.sh script exits and does not start cgminer.
Seems like 114.114.114.114 is down.. hopefully this is the problem!
Edit 2:
This was the problem. Upgraded from oct to dec firmware, fixed it.
April 24, 2016, 09:37:28 AM
Can you at least make it to the login page or the initial password screen, then to this main page with blank data?
If so, you have a few options
1st be to factory reset the S7 with a paperclip. There is a pin hole next to the Ethernet connector and use a paperclip and press and hold the button for about 10 seconds and let it go and wait for about 30 seconds and then physically reboot the S7. This may restore it to the factory default setting.
If this does not help, you may want to go find 8gb microSD card, and create a bootable MicroSD card and insert it into the microSD slot of the S7 and power it off and power it back on. Let the S7 complete the boot process and if possible, let it run as is for about 5 minutes then your Beagle Bone Black may be restored to the factory default setting.
Image and Imaging Tool:
https://bitmaintech.com/support.htm?pid=007201604120945219855QObfk20066C
If none of these works, your Beagle Bone Black or the Control PCB may be damaged.
Nice to see you returnIf so, you have a few options
1st be to factory reset the S7 with a paperclip. There is a pin hole next to the Ethernet connector and use a paperclip and press and hold the button for about 10 seconds and let it go and wait for about 30 seconds and then physically reboot the S7. This may restore it to the factory default setting.
If this does not help, you may want to go find 8gb microSD card, and create a bootable MicroSD card and insert it into the microSD slot of the S7 and power it off and power it back on. Let the S7 complete the boot process and if possible, let it run as is for about 5 minutes then your Beagle Bone Black may be restored to the factory default setting.
Image and Imaging Tool:
https://bitmaintech.com/support.htm?pid=007201604120945219855QObfk20066C
If none of these works, your Beagle Bone Black or the Control PCB may be damaged.
Antminer S7 B10 not connecting to the setup page. Nothing is configurable, miner is inaccesible.
http://imgur.com/yDMsOzb
Someone told me they fixed this in a new firmware update. Is this true? Im afraid to do a firmware update and that my miner will brick.
http://imgur.com/yDMsOzb
Someone told me they fixed this in a new firmware update. Is this true? Im afraid to do a firmware update and that my miner will brick.
https://bitcointalksearch.org/topic/m.14645057
https://bitcointalksearch.org/topic/m.14644921
https://bitcointalksearch.org/topic/m.14644846
All April 23rd dates above.
and this is:
A Jan 14th date
https://bitcointalksearch.org/topic/m.13548650
So you have been gone for 100 days.
A) I hope you stick around and help people with s-7 gear.
B) please solve my s-7 batch 1 issue it under preformed and you never sent me any compensation for it.
C) based on the compensation you gave to us at li's group it should be 67 USD.
So send me
67 USD worth of BTC here is my address
1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje
I have talked to yoshi months ago and sent a lot of emails asking for this money
no money.
I even said send me a coupon when I buy my next s-7
I purchased 17 of them no coupon.
Do not say the 100 dollar coupon counts as it is not any bigger then the ones sent with out my bad batch 1
Frankly it would need to be a 167 dollar coupon not a 100.
I don't understand a company like yours . I gave you 50,000 usd in business I supported you gear. At this moment I am trying to help a few people with bad s-7s'
https://bitcointalksearch.org/topic/from-4750-to-3200-1423701
And you blew me off for 67 USD that is truly dumb on the part of your company. really bad business.
It has reached the point that I wrote some truly nasty posts.
That is not my nature. I rather you fix this issue for me then chase after you and other bitmaintech workers.
April 24, 2016, 07:32:39 AM
Have one S7 running for 14 days now, excellent performance. Average 4.7 THs at 700 MHz. Buying a few more soon.
How much in those 14 days have you made in bitcoin? I am starting to garner interest in mining, but thought it maybe a lost cause for trying to get bitcoin and might start doing it for an alt coin or even litecoin.But want to know first what I can get in 2 weeks running one of these as they sell for $700 each as of now.
Thanks if you can answer this simply question of mine.
April 24, 2016, 07:28:39 AM
Have one S7 running for 14 days now, excellent performance. Average 4.7 THs at 700 MHz. Buying a few more soon.
Jump to: