Brilliant! However, there were only a few people that ordered or had EVGA 1600 Gold or Plat, hence problems. In addition, unless you install a 220v circuit, you are limited to oven/dryer outlet with Bitmains's PSU (in US at least).
Hardly. I'm USA based and simply dropped (2) 30amp 220V circuits onto a wall and run PDUs from them. Bought some power cords to match online and have been riding golden on my mining equipment every since.
well, you did install 30amp 220v circuits-exactly like I said above. I talked to electrician and he said that the wire gauge in my house is less than needed for 20-30amp circuits. I forgot the exact number-14 needed, I think. I hope that you have the right wire, but I don't-I could price it with electrician, of course, but did not get to it yet.
I ran mine straight from the panel, with the 10 gauge wire required for a 30 amp circuit, into a new 30 amp 220V breaker.
FYI: Within a US household and associated typical run lengths:
14 gauge wire (often with a white covering) is rated for 15 amps
12 gauge wire (often with a yellow covering) is rated for 20 amps
10 gauge wire (typically with a black covering) is rated for 30 amps
voltage doesn't matter with regards to wire thickness - at least at the voltages we are talking about.
All of this, including how to install such a circuit, is available in a ~$10 book on wiring available in most Home Depots or Lowes type stores. Of course, only do what you are comfortable doing.
