Pages:
Author

Topic: ANTMINER U3 Discussion and Support Thread - page 7. (Read 149415 times)

newbie
Activity: 2
Merit: 0
February 18, 2016, 05:25:19 PM
Help guys, I have 2 U3 antminer, 1 I bought from china, the other I got in my country. The chinese one came with original power supply conected to pc and tried on raspeberry pi 2, both with no success. Chinese from start didn't work, got steady light at led and tf1 (leds), sometimes rf1 blinks once and stops, cgminer doesn't detect u3, but windows does I followed instructions and used au3-freq 225 au3-volt 750, as described as default for the miner.  Chinese seller did extensive test over teamview an decided to send a new board.

It took 60days for the u3 to come, so more 60days with a new paper weigth, I got angry just tinking about it and bought another U3 in my country to mine while the board doesn't arive.

The new u3was the same model, I did the same config, worked for 1 day and stopped working. Now I only get a steady light at led, and rf1 blinks once no other.

Can any one help me understand or maybe fix, if its fixable?

Are you using same power supply? Do the two share any part's.  To have 2 dud's from different sources is unlikely.  I'm guessing there is a shared issue.

And I could be wrong but look at what the two share.   With windows Zadig can sometimes give problems.  So might look into driver.  With RPI though I would try more with it.  What issues did you run into with RPI?

The one that i got from china, arrived dead with original power supply, the one that I bought in my country came with a switch power supply.

Before the u3 from my country stop working, i tried tried both power supllies on it, both worked perfectly (so that would rule out power supply problem).

They never shared a part, only power supply and usb cable, so i could rule out bought as a faulty part. They didn't use the same power supply simultaneously. It couldn't be zadig, since i always used the raspeberry pi 2 too mine. About the led light i tried with different cables, different systems (pi and pc), different usb cables, different usb ports, different power supplies.
legendary
Activity: 1456
Merit: 1000
February 18, 2016, 03:13:15 PM
Help guys, I have 2 U3 antminer, 1 I bought from china, the other I got in my country. The chinese one came with original power supply conected to pc and tried on raspeberry pi 2, both with no success. Chinese from start didn't work, got steady light at led and tf1 (leds), sometimes rf1 blinks once and stops, cgminer doesn't detect u3, but windows does I followed instructions and used au3-freq 225 au3-volt 750, as described as default for the miner.  Chinese seller did extensive test over teamview an decided to send a new board.

It took 60days for the u3 to come, so more 60days with a new paper weigth, I got angry just tinking about it and bought another U3 in my country to mine while the board doesn't arive.

The new u3was the same model, I did the same config, worked for 1 day and stopped working. Now I only get a steady light at led, and rf1 blinks once no other.

Can any one help me understand or maybe fix, if its fixable?

Are you using same power supply? Do the two share any part's.  To have 2 dud's from different sources is unlikely.  I'm guessing there is a shared issue.

And I could be wrong but look at what the two share.   With windows Zadig can sometimes give problems.  So might look into driver.  With RPI though I would try more with it.  What issues did you run into with RPI?
newbie
Activity: 2
Merit: 0
February 18, 2016, 02:04:50 PM
Help guys, I have 2 U3 antminer, 1 I bought from china, the other I got in my country. The chinese one came with original power supply conected to pc and tried on raspeberry pi 2, both with no success. Chinese from start didn't work, got steady light at led and tf1 (leds), sometimes rf1 blinks once and stops, cgminer doesn't detect u3, but windows does I followed instructions and used au3-freq 225 au3-volt 750, as described as default for the miner.  Chinese seller did extensive test over teamview an decided to send a new board.

It took 60days for the u3 to come, so more 60days with a new paper weigth, I got angry just tinking about it and bought another U3 in my country to mine while the board doesn't arive.

The new u3was the same model, I did the same config, worked for 1 day and stopped working. Now I only get a steady light at led, and rf1 blinks once no other.

Can any one help me understand or maybe fix, if its fixable?
full member
Activity: 182
Merit: 107
February 07, 2016, 06:51:23 PM
Quick question -

Would a U3 be able to find me 1+ blocks a week running on the testnet and not the main network?

Not looking to mine for profit, looking to code for profit and just looking for way to easily generate my own test coins to work with, and maybe learn a little about the mining side of things at same time.
If you use testnet-in-a-box you can find blocks at diff 1, which makes these grossly overpowered for your own testnet.

I need to test interaction with coinbase - they use the standard testnet AFAIK.
-ck
legendary
Activity: 4088
Merit: 1631
Ruu \o/
February 07, 2016, 06:29:51 PM
Quick question -

Would a U3 be able to find me 1+ blocks a week running on the testnet and not the main network?

Not looking to mine for profit, looking to code for profit and just looking for way to easily generate my own test coins to work with, and maybe learn a little about the mining side of things at same time.
If you use testnet-in-a-box you can find blocks at diff 1, which makes these grossly overpowered for your own testnet.
full member
Activity: 182
Merit: 107
February 07, 2016, 05:40:31 PM
Quick question -

Would a U3 be able to find me 1+ blocks a week running on the testnet and not the main network?

Not looking to mine for profit, looking to code for profit and just looking for way to easily generate my own test coins to work with, and maybe learn a little about the mining side of things at same time.
zOU
hero member
Activity: 728
Merit: 500
★ these are stars ★
February 07, 2016, 02:00:06 PM
I think they made the U3 to sell off their leftover 1382 chips, hence the quick and poor design.
legendary
Activity: 1456
Merit: 1000
February 07, 2016, 01:57:25 PM
That's the answer i got from Bitmain after long email exchange with them:

Quote
HI

Sorry ,but all the U3 have out of warranty  .

If the miner still canto work well after the troubleshooting step provide to you .

That means the miner is dead .

Thank you (not) Bitmain....

I think the problem is they never solved the Zombie problem with U3's.  It seems in R1's they did good without zombie as far as 1 chip in router.  So I'm thinking it was not the greatest design, and I'm not sure they will mess with U series or not in future.  Compare that to a big miner... i'm guessing they are more interested in the bigger one with more profit.

As far as zombie, driver issues, not knowing command issues.   I still sugggest get a R1 and load it with crazy guy's custom firmware.  It' a amazing solution for a lot of the U3 problems.
zOU
hero member
Activity: 728
Merit: 500
★ these are stars ★
February 07, 2016, 01:40:37 PM
That's the answer i got from Bitmain after long email exchange with them:

Quote
HI

Sorry ,but all the U3 have out of warranty  .

If the miner still canto work well after the troubleshooting step provide to you .

That means the miner is dead .

Thank you (not) Bitmain....
full member
Activity: 157
Merit: 102
Always remember to be awesome.
February 07, 2016, 11:11:52 AM
My Antminer U3 never work properly, since day one. When I first unboxed it, it would always hash, but never accepting higher overclocks, no matter what I did. The max I could get was about 40GH/s, but when using these frequencies, it would always go ZOMBIE super fast. When I tried higher overclocking, the fan would spin slower and it would keep making very strange, high pitch sounds. The higher the frequency that didn't work, the higher the pich of the noise would be.

Then I ran it stable hashing at about 27GH/s for 6 to 5 weeks. It would still go ZOMBIE from time to time, but a reboot solved it.

Recently, however, it stopped working altogether. When I plug it to power, the fan will spin normally and the red leds light normally, but cgminer fails to detect it. Once it's plugged to USB it makes some very quiet, ticking sounds, while the fan spin at slower speeds. Then the ticking stops and the fan goes to normal speed, but the U3 isn't picked up by cgminer. On the rare occasions it is, it doesn't produce even a single valid share, slowly reducing reported hashrate on cgminer, until it finally goes ZOMBIE.

No matter what I do, I cannot get this device to produce even a single valid share. Is it really dead, or is there any salvation to it?

I'm using Ubuntu Linux as a Host, with cgminer 4.9.0, latest commit from bitmaintech's master branch. I also tried cgminer 4.9.2 from ckolivas' master branch, with the same unhappy results. I tried compiling with both static and dynamic libusb.

This is how the device is behaving right now:


Is there any official Bitmain support channel? Is there any debug/troubleshooting guide for this device? How can I confirm that this device has completed its transformation into a nerdy paperweight?

Thanks a lot!
newbie
Activity: 2
Merit: 0
February 04, 2016, 08:28:09 PM
I recently setup 2 U3 v2's and I have them running on my mac osx. I am using bfgminer, for some reason I can't get cgminer to work, and both u3's are going no faster than 5 gh/s, top speed i've seen has been 10 gh/s each. Whats the best way to overclock them on a mac?
zOU
hero member
Activity: 728
Merit: 500
★ these are stars ★
February 04, 2016, 02:30:24 AM
Seems like cgminer can't find the U3. Actually, the official manual explains the setup procedure quite well. Maybe you should go through all the steps once more and check if everything is done correctly.

I agree:

1- read the first post and follow the install procedure
2- run cgminer --benchmark to validate hashing
3- if fails, unplug/replug the U3 while cgminer is running
4- if fails: check you plug USB first, then power in the U3 while cgminer is running
5- if ok: check your pool settings
hero member
Activity: 690
Merit: 500
February 03, 2016, 07:48:14 PM
Seems like cgminer can't find the U3. Actually, the official manual explains the setup procedure quite well. Maybe you should go through all the steps once more and check if everything is done correctly.
newbie
Activity: 3
Merit: 0
February 03, 2016, 07:04:26 PM
Lots of errors at the end of your log about connecting to a pool, but that doesn't have anything to do with your U3.  What is your specific issue right now?  Have you tried other pools?

The problem still be load antminer U3.. they found, but some error occours that they dindt start do work..

i will sent anew log with a online pool, and another code with error section.
Tkz again!!

Code:
 [2016-02-03 21:47:29] Started cgminer 4.9.2
 [2016-02-03 21:47:29] USB scan devices: checking for AVA devices
 [2016-02-03 21:47:29] RES: thread starting
 [2016-02-03 21:47:29] AVA looking for BTB 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] AVA looking for BBF 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] AVA looking for AVA 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] AVA looking for BTB 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:29] AVA looking for BBF 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:29] AVA looking for AVA 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:29] AVA looking for BTB 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:29] AVA looking for BBF 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:29] AVA looking for AVA 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:29] AVA looking for BTB 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:29] AVA looking for BBF 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:29] AVA looking for AVA 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:29] AVA looking for BTB 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:29] AVA looking for BBF 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:29] AVA looking for AVA 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:29] AVA looking for BTB 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:29] AVA looking for BBF 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:29] AVA looking for AVA 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:29] USB scan devices: checking for AV2 devices
 [2016-02-03 21:47:29] AV2 looking for AV2 067b:2303 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] AV2 looking for AV2 067b:2303 but found 8087:0024 instead
 [2016-02-03 21:47:29] AV2 looking for AV2 067b:2303 but found 8086:1c2d instead
 [2016-02-03 21:47:29] AV2 looking for AV2 067b:2303 but found 8087:0024 instead
 [2016-02-03 21:47:29] AV2 looking for AV2 067b:2303 but found 1a40:0101 instead
 [2016-02-03 21:47:29] AV2 looking for AV2 067b:2303 but found 8086:1c26 instead
 [2016-02-03 21:47:29] USB scan devices: checking for AV4 devices
 [2016-02-03 21:47:29] AV4 looking for AV4 29f1:33f2 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] AV4 looking for AV4 29f1:33f2 but found 8087:0024 instead
 [2016-02-03 21:47:29] AV4 looking for AV4 29f1:33f2 but found 8086:1c2d instead
 [2016-02-03 21:47:29] AV4 looking for AV4 29f1:33f2 but found 8087:0024 instead
 [2016-02-03 21:47:29] AV4 looking for AV4 29f1:33f2 but found 1a40:0101 instead
 [2016-02-03 21:47:29] AV4 looking for AV4 29f1:33f2 but found 8086:1c26 instead
 [2016-02-03 21:47:29] USB scan devices: checking for BAS devices
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:29] USB scan devices: checking for BF1 devices
 [2016-02-03 21:47:29] BF1 looking for BF1 03eb:204b but found 10c4:ea60 instead
 [2016-02-03 21:47:29] BF1 looking for BXF 198c:b1f1 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] BF1 looking for OSM 198c:b1f1 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] BF1 looking for NFU 04d8:00de but found 10c4:ea60 instead
 [2016-02-03 21:47:29] BF1 looking for BXM 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] BF1 looking for BF1 03eb:204b but found 8087:0024 instead
 [2016-02-03 21:47:29] BF1 looking for BXF 198c:b1f1 but found 8087:0024 instead
 [2016-02-03 21:47:29] BF1 looking for OSM 198c:b1f1 but found 8087:0024 instead
 [2016-02-03 21:47:29] BF1 looking for NFU 04d8:00de but found 8087:0024 instead
 [2016-02-03 21:47:29] BF1 looking for BXM 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BF1 looking for BF1 03eb:204b but found 8086:1c2d instead
 [2016-02-03 21:47:29] BF1 looking for BXF 198c:b1f1 but found 8086:1c2d instead
 [2016-02-03 21:47:29] BF1 looking for OSM 198c:b1f1 but found 8086:1c2d instead
 [2016-02-03 21:47:29] BF1 looking for NFU 04d8:00de but found 8086:1c2d instead
 [2016-02-03 21:47:29] BF1 looking for BXM 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:29] BF1 looking for BF1 03eb:204b but found 8087:0024 instead
 [2016-02-03 21:47:29] BF1 looking for BXF 198c:b1f1 but found 8087:0024 instead
 [2016-02-03 21:47:29] BF1 looking for OSM 198c:b1f1 but found 8087:0024 instead
 [2016-02-03 21:47:29] BF1 looking for NFU 04d8:00de but found 8087:0024 instead
 [2016-02-03 21:47:29] BF1 looking for BXM 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BF1 looking for BF1 03eb:204b but found 1a40:0101 instead
 [2016-02-03 21:47:29] BF1 looking for BXF 198c:b1f1 but found 1a40:0101 instead
 [2016-02-03 21:47:29] BF1 looking for OSM 198c:b1f1 but found 1a40:0101 instead
 [2016-02-03 21:47:29] BF1 looking for NFU 04d8:00de but found 1a40:0101 instead
 [2016-02-03 21:47:29] BF1 looking for BXM 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:29] BF1 looking for BF1 03eb:204b but found 8086:1c26 instead
 [2016-02-03 21:47:29] BF1 looking for BXF 198c:b1f1 but found 8086:1c26 instead
 [2016-02-03 21:47:29] BF1 looking for OSM 198c:b1f1 but found 8086:1c26 instead
 [2016-02-03 21:47:29] BF1 looking for NFU 04d8:00de but found 8086:1c26 instead
 [2016-02-03 21:47:29] BF1 looking for BXM 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:29] USB scan devices: checking for CTA devices
 [2016-02-03 21:47:30] CTA looking for CTA 1cbe:0003 but found 10c4:ea60 instead
 [2016-02-03 21:47:30] CTA looking for CTA 1cbe:0003 but found 8087:0024 instead
 [2016-02-03 21:47:30] CTA looking for CTA 1cbe:0003 but found 8086:1c2d instead
 [2016-02-03 21:47:30] CTA looking for CTA 1cbe:0003 but found 8087:0024 instead
 [2016-02-03 21:47:30] CTA looking for CTA 1cbe:0003 but found 1a40:0101 instead
 [2016-02-03 21:47:30] CTA looking for CTA 1cbe:0003 but found 8086:1c26 instead
 [2016-02-03 21:47:30] USB scan devices: checking for HFA devices
 [2016-02-03 21:47:30] HFA looking for HFA 297c:0001 but found 10c4:ea60 instead
 [2016-02-03 21:47:30] HFA looking for HFA 297c:0001 but found 8087:0024 instead
 [2016-02-03 21:47:30] HFA looking for HFA 297c:0001 but found 8086:1c2d instead
 [2016-02-03 21:47:30] HFA looking for HFA 297c:0001 but found 8087:0024 instead
 [2016-02-03 21:47:30] HFA looking for HFA 297c:0001 but found 1a40:0101 instead
 [2016-02-03 21:47:30] HFA looking for HFA 297c:0001 but found 8086:1c26 instead
 [2016-02-03 21:47:30] USB scan devices: checking for HRO devices
 [2016-02-03 21:47:30] HRO looking for HRO 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 21:47:30] HRO looking for HRO 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:30] HRO looking for HRO 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:30] HRO looking for HRO 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:30] HRO looking for HRO 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:30] HRO looking for HRO 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:30] USB scan devices: checking for ICA devices
 [2016-02-03 21:47:30] ICA looking for ICA 067b:2303 but found 10c4:ea60 instead
 [2016-02-03 21:47:30] ICA looking for ICA 1fc9:0083 but found 10c4:ea60 instead
 [2016-02-03 21:47:30] ICA looking for and found AMU 10c4:ea60
 [2016-02-03 21:47:30] USB lock Icarus 1-2
 [2016-02-03 21:47:30] RES: Icarus (1:2) lock=1
 [2016-02-03 21:47:30] USB res lock Icarus 1-2
 [2016-02-03 21:47:30] RES: Icarus (1:2) lock ok=1
 [2016-02-03 21:47:30] USB init - AMU device 1:2 usbver=0110 prod='CP2102 USB to UART Bridge Controller' manuf='Silicon Labs' serial='0001'
 [2016-02-03 21:47:30] AMU 0: send_gold_nonce 4a548fe471fa3a9a1371144556c3f64d2500b4826008fe4bbf7698c94eba794600000000000000000000000000000000aa1ff055ce22a72f4f6726141a0b3287
 [2016-02-03 21:47:30] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:30] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:30] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:30] tries: 3
 [2016-02-03 21:47:30] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:30] Icarus Read: No data for 101 ms
 [2016-02-03 21:47:30] Rockminer nonce_bin: 00 00 00 00 00 00 00 00
 [2016-02-03 21:47:30] detect_one get_gold_nonce error, tries = 3
 [2016-02-03 21:47:30] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:30] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:30] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:30] tries: 2
 [2016-02-03 21:47:30] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:30] Icarus Read: No data for 101 ms
 [2016-02-03 21:47:30] Rockminer nonce_bin: 00 00 00 00 00 00 00 00
 [2016-02-03 21:47:30] detect_one get_gold_nonce error, tries = 2
 [2016-02-03 21:47:30] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:30] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:30] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:30] tries: 1
 [2016-02-03 21:47:31] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:31] Icarus Read: No data for 101 ms
 [2016-02-03 21:47:31] Rockminer nonce_bin: 00 00 00 00 00 00 00 00
 [2016-02-03 21:47:31] detect_one get_gold_nonce error, tries = 1
 [2016-02-03 21:47:31] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:31] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:31] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:31] tries: 0
 [2016-02-03 21:47:31] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:31] Icarus Read: No data for 101 ms
 [2016-02-03 21:47:31] Rockminer nonce_bin: 00 00 00 00 00 00 00 00
 [2016-02-03 21:47:31] detect_one get_gold_nonce error, tries = 0
 [2016-02-03 21:47:31] USB uninit AMU0
 [2016-02-03 21:47:31] USB free AMU
 [2016-02-03 21:47:31] USB unlock Icarus 1-2
 [2016-02-03 21:47:31] I [2CA 0lo16ok-i02n-03g 2 1for :4I7:31] CRA E0S: Ic67ab:2r3us0 (13:2 ) lock=0b
ut found 8087:0024 instead
 [2016-02-03 21:47:31] USB res unlock Icarus 1-2
 [2016-02-03 21:47:31] ICA looking for ICA 1fc9:0083 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for AMU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for LIN 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for ANU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for BLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for LLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for CMR 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for CMR 0403:8350 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for ICA 067b:2303 but found 8086:1c2d instead
 [2016-02-03 21:47:31] ICA looking for ICA 1fc9:0083 but found 8086:1c2d instead
 [2016-02-03 21:47:31] ICA looking for AMU 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 21:47:31] ICA looking for LIN 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 21:47:31] ICA looking for ANU 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 21:47:31] ICA looking for BLT 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:31] ICA looking for LLT 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:31] ICA looking for CMR 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:31] ICA looking for CMR 0403:8350 but found 8086:1c2d instead
 [2016-02-03 21:47:31] ICA looking for ICA 067b:2303 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for ICA 1fc9:0083 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for AMU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for LIN 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for ANU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for BLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for LLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for CMR 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for CMR 0403:8350 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for ICA 067b:2303 but found 1a40:0101 instead
 [2016-02-03 21:47:31] ICA looking for ICA 1fc9:0083 but found 1a40:0101 instead
 [2016-02-03 21:47:31] ICA looking for AMU 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 21:47:31] ICA looking for LIN 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 21:47:31] ICA looking for ANU 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 21:47:31] ICA looking for BLT 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:31] ICA looking for LLT 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:31] ICA looking for CMR 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:31] ICA looking for CMR 0403:8350 but found 1a40:0101 instead
 [2016-02-03 21:47:31] ICA looking for ICA 067b:2303 but found 8086:1c26 instead
 [2016-02-03 21:47:31] ICA looking for ICA 1fc9:0083 but found 8086:1c26 instead
 [2016-02-03 21:47:31] ICA looking for AMU 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 21:47:31] ICA looking for LIN 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 21:47:31] ICA looking for ANU 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 21:47:31] ICA looking for BLT 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:31] ICA looking for LLT 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:31] ICA looking for CMR 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:31] ICA looking for CMR 0403:8350 but found 8086:1c26 instead
 [2016-02-03 21:47:31] USB scan devices: checking for ICA devices
 [2016-02-03 21:47:31] ICA looking for ICA 067b:2303 but found 10c4:ea60 instead
 [2016-02-03 21:47:31] ICA looking for ICA 1fc9:0083 but found 10c4:ea60 instead
 [2016-02-03 21:47:31] ICA looking for and found AMU 10c4:ea60
 [2016-02-03 21:47:31] USB lock Icarus 1-2
 [2016-02-03 21:47:31] RES: Icarus (1:2) lock=1
 [2016-02-03 21:47:31] USB res lock Icarus 1-2
 [2016-02-03 21:47:31] RES: Icarus (1:2) lock ok=1
 [2016-02-03 21:47:31] USB init - AMU device 1:2 usbver=0110 prod='CP2102 USB to UART Bridge Controller' manuf='Silicon Labs' serial='0001'
 [2016-02-03 21:47:31] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:31] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:31] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:31] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:31] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:31] Icarus Read: No data for 301 ms
 [2016-02-03 21:47:31] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:31] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:31] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:31] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:32] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:32] Icarus Read: No data for 302 ms
 [2016-02-03 21:47:32] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:32] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:32] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:32] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:32] Send ANU voltage aab775de
 [2016-02-03 21:47:32] AMU 0: Send frequency 8208821c
 [2016-02-03 21:47:32] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:32] AMU 0: Send freq getstatus 84000400
 [2016-02-03 21:47:33] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:33] AU3 0: Detected Antminer U3
 [2016-02-03 21:47:33] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:33] Icarus Read: No data for 302 ms
 [2016-02-03 21:47:33] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:33] AU3: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:33] AU3: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:33] AU3: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:33] Send ANU voltage aab775de
 [2016-02-03 21:47:33] AU3 0: Send frequency 8208821c
 [2016-02-03 21:47:34] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:34] AU3 0: Send freq getstatus 84000400
 [2016-02-03 21:47:34] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:34] AU3 0: Detected Antminer U3
 [2016-02-03 21:47:34] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:34] Icarus Read: No data for 301 ms
 [2016-02-03 21:47:34] USB uninit AU30
 [2016-02-03 21:47:34] USB free AMU
 [2016-02-03 21:47:34] USB unlock Icarus 1-2
 [2016-02-03 21:47:34] ICA looking for ICA 067b:2303 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for ICA 1fc9:0083 but found 8087:0024 instead
 [2016-02-03 21:47:34] RES: Icarus (1:2) lock=0
 [2016-02-03 21:47:34] ICA looking for AMU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:34] USB res unlock Icarus 1-2
 [2016-02-03 21:47:34] ICA looking for LIN 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for ANU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for BLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for LLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for CMR 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for CMR 0403:8350 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for ICA 067b:2303 but found 8086:1c2d instead
 [2016-02-03 21:47:34] ICA looking for ICA 1fc9:0083 but found 8086:1c2d instead
 [2016-02-03 21:47:34] ICA looking for AMU 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 21:47:34] ICA looking for LIN 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 21:47:34] ICA looking for ANU 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 21:47:34] ICA looking for BLT 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:34] ICA looking for LLT 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:34] ICA looking for CMR 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:34] ICA looking for CMR 0403:8350 but found 8086:1c2d instead
 [2016-02-03 21:47:34] ICA looking for ICA 067b:2303 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for ICA 1fc9:0083 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for AMU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for LIN 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for ANU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for BLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for LLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for CMR 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for CMR 0403:8350 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for ICA 067b:2303 but found 1a40:0101 instead
 [2016-02-03 21:47:34] ICA looking for ICA 1fc9:0083 but found 1a40:0101 instead
 [2016-02-03 21:47:34] ICA looking for AMU 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 21:47:34] ICA looking for LIN 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 21:47:34] ICA looking for ANU 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 21:47:34] ICA looking for BLT 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:34] ICA looking for LLT 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:34] ICA looking for CMR 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:34] ICA looking for CMR 0403:8350 but found 1a40:0101 instead
 [2016-02-03 21:47:34] ICA looking for ICA 067b:2303 but found 8086:1c26 instead
 [2016-02-03 21:47:34] ICA looking for ICA 1fc9:0083 but found 8086:1c26 instead
 [2016-02-03 21:47:34] ICA looking for AMU 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 21:47:34] ICA looking for LIN 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 21:47:34] ICA looking for ANU 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 21:47:34] ICA looking for BLT 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:34] ICA looking for LLT 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:34] ICA looking for CMR 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:34] ICA looking for CMR 0403:8350 but found 8086:1c26 instead
 [2016-02-03 21:47:34] USB scan devices: checking for KLN devices
 [2016-02-03 21:47:34] KLN looking for KLN 04d8:f60a but found 10c4:ea60 instead
 [2016-02-03 21:47:34] KLN looking for KLI 04d8:f60a but found 10c4:ea60 instead
 [2016-02-03 21:47:34] KLN looking for KLN 04d8:f60a but found 8087:0024 instead
 [2016-02-03 21:47:34] KLN looking for KLI 04d8:f60a but found 8087:0024 instead
 [2016-02-03 21:47:34] KLN looking for KLN 04d8:f60a but found 8086:1c2d instead
 [2016-02-03 21:47:34] KLN looking for KLI 04d8:f60a but found 8086:1c2d instead
 [2016-02-03 21:47:34] KLN looking for KLN 04d8:f60a but found 8087:0024 instead
 [2016-02-03 21:47:34] KLN looking for KLI 04d8:f60a but found 8087:0024 instead
 [2016-02-03 21:47:34] KLN looking for KLN 04d8:f60a but found 1a40:0101 instead
 [2016-02-03 21:47:34] KLN looking for KLI 04d8:f60a but found 1a40:0101 instead
 [2016-02-03 21:47:34] KLN looking for KLN 04d8:f60a but found 8086:1c26 instead
 [2016-02-03 21:47:34] KLN looking for KLI 04d8:f60a but found 8086:1c26 instead
 [2016-02-03 21:47:34] USB scan devices: checking for DRB devices
 [2016-02-03 21:47:34] DRB looking for DRB 03eb:2404 but found 10c4:ea60 instead
 [2016-02-03 21:47:34] DRB looking for DRB 03eb:2404 but found 8087:0024 instead
 [2016-02-03 21:47:34] DRB looking for DRB 03eb:2404 but found 8086:1c2d instead
 [2016-02-03 21:47:34] DRB looking for DRB 03eb:2404 but found 8087:0024 instead
 [2016-02-03 21:47:34] DRB looking for DRB 03eb:2404 but found 1a40:0101 instead
 [2016-02-03 21:47:34] DRB looking for DRB 03eb:2404 but found 8086:1c26 instead
 [2016-02-03 21:47:34] No devices detected!
 [2016-02-03 21:47:34] Waiting for USB hotplug devices or press q to quit
 [2016-02-03 21:47:34] Probing for an alive pool
 [2016-02-03 21:47:34] Testing pool stratum+tcp://stratum.antpool.com:443
 [2016-02-03 21:47:35] Succeeded delayed connect
 [2016-02-03 21:47:35] Pool 0 stratum session id: 911200001
 [2016-02-03 21:47:35] Pool 0 difficulty changed to 1024
 [2016-02-03 21:47:35] Pool 0 coinbase 01000000010000000000000000000000000000000000000000000000000000000000000000ffffffff2b03180d061e4d696e656420627920416e74506f6f6c20757361343425939e2056b291d39112000000000000ffffffff0100f90295000000001976a9142ef12bd2ac1416406d0e132e5bc8d0b02df
 [2016-02-03 21:47:36] Stratum authorisation success for pool 0
 [2016-02-03 21:47:36] Pool 0 stratum+tcp://stratum.antpool.com:443 alive
 [2016-02-03 21:47:36] Pool 0 coinbase 01000000010000000000000000000000000000000000000000000000000000000000000000ffffffff2b03180d061e4d696e656420627920416e74506f6f6c20757361343425939e2056b291d39112000000000000ffffffff0100f90295000000001976a9142ef12bd2ac1416406d0e132e5bc8d0b02df
 [2016-02-03 21:47:36] Work update message received
 [2016-02-03 21:47:36]  [Sele2016-c02ti-n0g3 2 p1ool:47 0 :for3 work
6] API not running - API will not be available
 [2016-02-03 21:47:36] Generated stratum merkle b03fe4091c6b1d6c814b7db9e336761f3c2640fb518e8b35d66bbc602c9dc468
 [2016-02-03 21:47:36] Generated stratum header 00000004a1d30354997616cf18960e0c98aac71c8e9caa29008da55c0000000000000000b03fe4091c6b1d6c814b7db9e336761f3c2640fb518e8b35d66bbc602c9dc46856b291d3180928f0000000000000008000000000000000000000000000000000000000000000000000000000
 [2016-02-03 21:47:36] Work job_id 1454543315 4014 nonce2 0 ntime 56b291d3
 [2016-02-03 21:47:36] Generated target 000000000000000000000000000000000000000000000000c0ff3f0000000000
 [2016-02-03 21:47:36] Generated stratum work
 [2016-02-03 21:47:36] Pushing work from pool 0 to hash queue
 [2016-02-03 21:47:36] Network diff set to 120G
 [2016-02-03 21:47:36] New block: 0000000000000000008da55c8e9caa2998aac71c18960e0c997616cfa1d30354... diff 120G
 [2016-02-03 21:47:36] Selecting pool 0 for work
 [2016-02-03 21:47:36] Generated stratum merkle dc8d7fb02202b6df44f52f4ee5f920aaff3db73582b86559b14cf735fea0de54
 [2016-02-03 21:47:36] Generated stratum header 00000004a1d30354997616cf18960e0c98aac71c8e9caa29008da55c0000000000000000dc8d7fb02202b6df44f52f4ee5f920aaff3db73582b86559b14cf735fea0de5456b291d3180928f0000000000000008000000000000000000000000000000000000000000000000000000000
 [2016-02-03 21:47:36] Work job_id 1454543315 4014 nonce2 1 ntime 56b291d3
 [2016-02-03 21:47:36] Generated target 000000000000000000000000000000000000000000000000c0ff3f0000000000
 [2016-02-03 21:47:36] Generated stratum work
 [2016-02-03 21:47:36] Pushing work from pool 0 to hash queue
 [2016-02-03 21:47:38] Discarded work
 [2016-02-03 21:47:38] (5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s
 [2016-02-03 21:47:38] Selecting pool 0 for work
 [2016-02-03 21:47:38] Generated stratum merkle e14eedbffe5c2ab4988df7c2eac82c3b2a1db1a466c465252c83c5f534c568e7
 [2016-02-03 21:47:38] Generated stratum header 00000004a1d30354997616cf18960e0c98aac71c8e9caa29008da55c0000000000000000e14eedbffe5c2ab4988df7c2eac82c3b2a1db1a466c465252c83c5f534c568e756b291d3180928f0000000000000008000000000000000000000000000000000000000000000000000000000
 [2016-02-03 21:47:38] Work job_id 1454543315 4014 nonce2 2 ntime 56b291d3
 [2016-02-03 21:47:38] Generated target 000000000000000000000000000000000000000000000000c0ff3f0000000000
 [2016-02-03 21:47:38] Generated stratum work
 [2016-02-03 21:47:38] Pushing work from pool 0 to hash queue
 [2016-02-03 21:47:40] Discarded work
 [2016-02-03 21:47:40] Selecting pool 0 for work
 [2016-02-03 21:47:40] Generated stratum merkle 6089ca645c4af8cfd3363931d9c81655ad6fe52688e43ef225ccd79055e32531
 [2016-02-03 21:47:40] Generated stratum header 00000004a1d30354997616cf18960e0c98aac71c8e9caa29008da55c00000000000000006089ca645c4af8cfd3363931d9c81655ad6fe52688e43ef225ccd79055e3253156b291d3180928f0000000000000008000000000000000000000000000000000000000000000000000000000
 [2016-02-03 21:47:40] Work job_id 1454543315 4014 nonce2 3 ntime 56b291d3
 [2016-02-03 21:47:40] Generated target 000000000000000000000000000000000000000000000000c0ff3f0000000000
 [2016-02-03 21:47:40] Generated stratum work
 [2016-02-03 21:47:40] Pushing work from pool 0 to hash queue
 [2016-02-03 21:47:41] USB scan devices: checking for AVA devices
 [2016-02-03 21:47:41] AVA looking for BTB 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 21:47:41] AVA looking for BBF 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 21:47:41] AVA looking for AVA 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 21:47:41] AVA looking for BTB 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:41] AVA looking for BBF 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:41] AVA looking for AVA 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:41] AVA looking for BTB 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:41] AVA looking for BBF 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:41] AVA looking for AVA 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:41] AVA looking for BTB 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:41] AVA looking for BBF 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:41] AVA looking for AVA 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:41] AVA looking for BTB 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:41] AVA looking for BBF 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:41] AVA looking for AVA 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:41] AVA looking for BTB 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:41] AVA looking for BBF 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:41] AVA looking for AVA 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:41] USB scan devices: checking for AV2 devices
 [2016-02-03 21:47:42] AV2 looking for AV2 067b:2303 but found 10c4:ea60 instead
 [2016-02-03 21:47:42] AV2 looking for AV2 067b:2303 but found 8087:0024 instead
 [2016-02-03 21:47:42] AV2 looking for AV2 067b:2303 but found 8086:1c2d instead
 [2016-02-03 21:47:42] AV2 looking for AV2 067b:2303 but found 8087:0024 instead
 [2016-02-03 21:47:42] AV2 looking for AV2 067b:2303 but found 1a40:0101 instead
 [2016-02-03 21:47:42] AV2 looking for AV2 067b:2303 but found 8086:1c26 instead
 [2016-02-03 21:47:42] USB scan devices: checking for AV4 devices
 [2016-02-03 21:47:42] AV4 looking for AV4 29f1:33f2 but found 10c4:ea60 instead
 [2016-02-03 21:47:42] AV4 looking for AV4 29f1:33f2 but found 8087:0024 instead
 [2016-02-03 21:47:42] AV4 looking for AV4 29f1:33f2 but found 8086:1c2d instead
 [2016-02-03 21:47:42] AV4 looking for AV4 29f1:33f2 but found 8087:0024 instead
 [2016-02-03 21:47:42] AV4 looking for AV4 29f1:33f2 but found 1a40:0101 instead
 [2016-02-03 21:47:42] AV4 looking for AV4 29f1:33f2 but found 8086:1c26 instead
 [2016-02-03 21:47:42] USB scan devices: checking for BAS devices
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:42] USB scan devices: checking for BF1 devices
 [2016-02-03 21:47:42] Received kill message
 [2016-02-03 21:47:42] Killing off HotPlug thread
 [2016-02-03 21:47:42] Killing off watchpool thread
 [2016-02-03 21:47:42] Killing off watchdog thread
 [2016-02-03 21:47:42] Shutting down mining threads
 [2016-02-03 21:47:43] Killing off mining threads
 [2016-02-03 21:47:43] Killing off API thread
 [2016-02-03 21:47:43] Releasing all USB devices
 [2016-02-03 21:47:43] Killing off usbres thread
 [2016-02-03 21:47:43] Shutdown signal received.
 [2016-02-03 21:47:43]
Summary of runtime statistics:

 [2016-02-03 21:47:43] Started at [2016-02-03 21:47:36]
 [2016-02-03 21:47:43] Pool: stratum+tcp://stratum.antpool.com:443
 [2016-02-03 21:47:43] Runtime: 0 hrs : 0 mins : 6 secs
 [2016-02-03 21:47:43] Average hashrate: 0.0 Mhash/s
 [2016-02-03 21:47:43] Solved blocks: 0
 [2016-02-03 21:47:43] Best share difficulty: 0
 [2016-02-03 21:47:43] Share submissions: 0
 [2016-02-03 21:47:43] Accepted shares: 0
 [2016-02-03 21:47:43] Rejected shares: 0
 [2016-02-03 21:47:43] Accepted difficulty shares: 0
 [2016-02-03 21:47:43] Rejected difficulty shares: 0
 [2016-02-03 21:47:43] Hardware errors: 0
 [2016-02-03 21:47:43] Utility (accepted shares / min): 0.00/min
 [2016-02-03 21:47:43] Work Utility (diff1 shares solved / min): 0.00/min

 [2016-02-03 21:47:43] Stale submissions discarded due to new blocks: 0
 [2016-02-03 21:47:43] Unable to get work from server occasions: 0
 [2016-02-03 21:47:43] Work items generated locally: 4
 [2016-02-03 21:47:43] Submitting work remotely delay occasions: 0
 [2016-02-03 21:47:43] New blocks detected on network: 1

 [2016-02-03 21:47:43] Summary of per device statistics:

 [2016-02-03 21:47:43] 
 [2016-02-03 21:47:43] Timed out waiting for data on socket_full
 [2016-02-03 21:47:43] Stratum connection to pool 0 interrupted
 [2016-02-03 21:47:43] Cleared 2 work items due to stratum disconnect on pool 0
 [2016-02-03 21:47:43] Closing socket for stratum pool 0
 [2016-02-03 21:47:43] Failed to getaddrinfo for stratum.antpool.com:443
 [2016-02-03 21:47:43] Initiate stratum failed
 [2016-02-03 21:47:43] Pool 0 stratum+tcp://stratum.antpool.com:443  n[o2t0 1r6-e0s2p-o0n3d i2n1g:!4
7:43] Selecting pool 0 for work
 [2016-02-03 21:47:43] Selecting pool 0 for work

Code:
 [2016-02-03 21:47:31] ICA looking for CMR 0403:8350 but found 8086:1c26 instead
 [2016-02-03 21:47:31] USB scan devices: checking for ICA devices
 [2016-02-03 21:47:31] ICA looking for ICA 067b:2303 but found 10c4:ea60 instead
 [2016-02-03 21:47:31] ICA looking for ICA 1fc9:0083 but found 10c4:ea60 instead
 [2016-02-03 21:47:31] ICA looking for and found AMU 10c4:ea60
 [2016-02-03 21:47:31] USB lock Icarus 1-2
 [2016-02-03 21:47:31] RES: Icarus (1:2) lock=1
 [2016-02-03 21:47:31] USB res lock Icarus 1-2
 [2016-02-03 21:47:31] RES: Icarus (1:2) lock ok=1
 [2016-02-03 21:47:31] USB init - AMU device 1:2 usbver=0110 prod='CP2102 USB to UART Bridge Controller' manuf='Silicon Labs' serial='0001'
 [2016-02-03 21:47:31] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:31] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:31] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:31] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:31] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:31] Icarus Read: No data for 301 ms
 [2016-02-03 21:47:31] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:31] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:31] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:31] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:32] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:32] Icarus Read: No data for 302 ms
 [2016-02-03 21:47:32] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:32] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:32] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:32] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:32] Send ANU voltage aab775de
 [2016-02-03 21:47:32] AMU 0: Send frequency 8208821c
 [2016-02-03 21:47:32] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:32] AMU 0: Send freq getstatus 84000400
 [2016-02-03 21:47:33] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:33] AU3 0: Detected Antminer U3
 [2016-02-03 21:47:33] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:33] Icarus Read: No data for 302 ms
 [2016-02-03 21:47:33] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:33] AU3: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:33] AU3: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:33] AU3: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:33] Send ANU voltage aab775de
 [2016-02-03 21:47:33] AU3 0: Send frequency 8208821c
 [2016-02-03 21:47:34] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:34] AU3 0: Send freq getstatus 84000400
 [2016-02-03 21:47:34] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:34] AU3 0: Detected Antminer U3
 [2016-02-03 21:47:34] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:34] Icarus Read: No data for 301 ms
 [2016-02-03 21:47:34] USB uninit AU30
 [2016-02-03 21:47:34] USB free AMU
 [2016-02-03 21:47:34] USB unlock Icarus 1-2
 [2016-02-03 21:47:34] ICA looking for ICA 067b:2303 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for ICA 1fc9:0083 but found 8087:0024 instead
 [2016-02-03 21:47:34] RES: Icarus (1:2) lock=0
 [2016-02-03 21:47:34] ICA looking for AMU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:34] USB res unlock Icarus 1-2
 [2016-02-03 21:47:34] ICA looking for LIN 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for ANU 10c4:ea60 but found 8087:0024 instead
...
 [2016-02-03 21:47:34] No devices detected!
 [2016-02-03 21:47:34] Waiting for USB hotplug devices or press q to quit
legendary
Activity: 1274
Merit: 1000
February 03, 2016, 06:23:36 PM
Lots of errors at the end of your log about connecting to a pool, but that doesn't have anything to do with your U3.  What is your specific issue right now?  Have you tried other pools?
newbie
Activity: 3
Merit: 0
February 03, 2016, 05:40:36 PM
Some one can help me with my U3?
cgminer can't load it.
Did you run zadig?  Did it install the driver properly?  Can you see the U3 in your device manager?

Use the latest release of cgminer, 4.9.2.

zadig = yes
Did it install the driver properly = i hope so
Can you see the U3 in your device manager = yes

Follow bellow log listing drivers and using CGIMiner 4.9.2 Smiley thanks for help!!

Code:
PS C:\Users\fabia> gwmi Win32_USBControllerDevice |%{[wmi]($_.Dependent)} | Sort Description,DeviceID | ft Description,D
eviceID -auto

Description                          DeviceID
-----------                          --------
CP2102 USB to UART Bridge Controller USB\VID_10C4&PID_EA60\0001
Generic USB Hub                      USB\VID_1A40&PID_0101\6&1464158D&0&2
Generic USB Hub                      USB\VID_8087&PID_0024\5&353609BF&0&1
Generic USB Hub                      USB\VID_8087&PID_0024\5&7DF0F0E&0&1
USB Root Hub                         USB\ROOT_HUB20\4&69E0C5A&0
USB Root Hub                         USB\ROOT_HUB20\4&BAA89A0&0

                                                                                                                     
Code:
 [2016-02-03 20:34:49] Started cgminer 4.9.2
 [2016-02-03 20:34:49] USB scan devices: checking for AVA devices
 [2016-02-03 20:34:49] RES: thread starting
 [2016-02-03 20:34:49] AVA looking for BTB 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 20:34:49] AVA looking for BBF 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 20:34:49] AVA looking for AVA 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 20:34:49] AVA looking for BTB 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:49] AVA looking for BBF 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:49] AVA looking for AVA 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:49] AVA looking for BTB 0403:6001 but found 8086:1c2d instead
 [2016-02-03 20:34:49] AVA looking for BBF 0403:6001 but found 8086:1c2d instead
 [2016-02-03 20:34:49] AVA looking for AVA 0403:6001 but found 8086:1c2d instead
 [2016-02-03 20:34:49] AVA looking for BTB 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:49] AVA looking for BBF 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:49] AVA looking for AVA 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:49] AVA looking for BTB 0403:6001 but found 1a40:0101 instead
 [2016-02-03 20:34:49] AVA looking for BBF 0403:6001 but found 1a40:0101 instead
 [2016-02-03 20:34:49] AVA looking for AVA 0403:6001 but found 1a40:0101 instead
 [2016-02-03 20:34:49] AVA looking for BTB 0403:6001 but found 8086:1c26 instead
 [2016-02-03 20:34:49] AVA looking for BBF 0403:6001 but found 8086:1c26 instead
 [2016-02-03 20:34:49] AVA looking for AVA 0403:6001 but found 8086:1c26 instead
 [2016-02-03 20:34:49] USB scan devices: checking for AV2 devices
 [2016-02-03 20:34:50] AV2 looking for AV2 067b:2303 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] AV2 looking for AV2 067b:2303 but found 8087:0024 instead
 [2016-02-03 20:34:50] AV2 looking for AV2 067b:2303 but found 8086:1c2d instead
 [2016-02-03 20:34:50] AV2 looking for AV2 067b:2303 but found 8087:0024 instead
 [2016-02-03 20:34:50] AV2 looking for AV2 067b:2303 but found 1a40:0101 instead
 [2016-02-03 20:34:50] AV2 looking for AV2 067b:2303 but found 8086:1c26 instead
 [2016-02-03 20:34:50] USB scan devices: checking for AV4 devices
 [2016-02-03 20:34:50] AV4 looking for AV4 29f1:33f2 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] AV4 looking for AV4 29f1:33f2 but found 8087:0024 instead
 [2016-02-03 20:34:50] AV4 looking for AV4 29f1:33f2 but found 8086:1c2d instead
 [2016-02-03 20:34:50] AV4 looking for AV4 29f1:33f2 but found 8087:0024 instead
 [2016-02-03 20:34:50] AV4 looking for AV4 29f1:33f2 but found 1a40:0101 instead
 [2016-02-03 20:34:50] AV4 looking for AV4 29f1:33f2 but found 8086:1c26 instead
 [2016-02-03 20:34:50] USB scan devices: checking for BAS devices
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 8086:1c2d instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 8086:1c2d instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8086:1c2d instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8086:1c2d instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8086:1c2d instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 1a40:0101 instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 1a40:0101 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 1a40:0101 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 1a40:0101 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 1a40:0101 instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 8086:1c26 instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 8086:1c26 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8086:1c26 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8086:1c26 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8086:1c26 instead
 [2016-02-03 20:34:50] USB scan devices: checking for BF1 devices
 [2016-02-03 20:34:50] BF1 looking for BF1 03eb:204b but found 10c4:ea60 instead
 [2016-02-03 20:34:50] BF1 looking for BXF 198c:b1f1 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] BF1 looking for OSM 198c:b1f1 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] BF1 looking for NFU 04d8:00de but found 10c4:ea60 instead
 [2016-02-03 20:34:50] BF1 looking for BXM 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] BF1 looking for BF1 03eb:204b but found 8087:0024 instead
 [2016-02-03 20:34:50] BF1 looking for BXF 198c:b1f1 but found 8087:0024 instead
 [2016-02-03 20:34:50] BF1 looking for OSM 198c:b1f1 but found 8087:0024 instead
 [2016-02-03 20:34:50] BF1 looking for NFU 04d8:00de but found 8087:0024 instead
 [2016-02-03 20:34:50] BF1 looking for BXM 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BF1 looking for BF1 03eb:204b but found 8086:1c2d instead
 [2016-02-03 20:34:50] BF1 looking for BXF 198c:b1f1 but found 8086:1c2d instead
 [2016-02-03 20:34:50] BF1 looking for OSM 198c:b1f1 but found 8086:1c2d instead
 [2016-02-03 20:34:50] BF1 looking for NFU 04d8:00de but found 8086:1c2d instead
 [2016-02-03 20:34:50] BF1 looking for BXM 0403:6014 but found 8086:1c2d instead
 [2016-02-03 20:34:50] BF1 looking for BF1 03eb:204b but found 8087:0024 instead
 [2016-02-03 20:34:50] BF1 looking for BXF 198c:b1f1 but found 8087:0024 instead
 [2016-02-03 20:34:50] BF1 looking for OSM 198c:b1f1 but found 8087:0024 instead
 [2016-02-03 20:34:50] BF1 looking for NFU 04d8:00de but found 8087:0024 instead
 [2016-02-03 20:34:50] BF1 looking for BXM 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BF1 looking for BF1 03eb:204b but found 1a40:0101 instead
 [2016-02-03 20:34:50] BF1 looking for BXF 198c:b1f1 but found 1a40:0101 instead
 [2016-02-03 20:34:50] BF1 looking for OSM 198c:b1f1 but found 1a40:0101 instead
 [2016-02-03 20:34:50] BF1 looking for NFU 04d8:00de but found 1a40:0101 instead
 [2016-02-03 20:34:50] BF1 looking for BXM 0403:6014 but found 1a40:0101 instead
 [2016-02-03 20:34:50] BF1 looking for BF1 03eb:204b but found 8086:1c26 instead
 [2016-02-03 20:34:50] BF1 looking for BXF 198c:b1f1 but found 8086:1c26 instead
 [2016-02-03 20:34:50] BF1 looking for OSM 198c:b1f1 but found 8086:1c26 instead
 [2016-02-03 20:34:50] BF1 looking for NFU 04d8:00de but found 8086:1c26 instead
 [2016-02-03 20:34:50] BF1 looking for BXM 0403:6014 but found 8086:1c26 instead
 [2016-02-03 20:34:50] USB scan devices: checking for CTA devices
 [2016-02-03 20:34:50] CTA looking for CTA 1cbe:0003 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] CTA looking for CTA 1cbe:0003 but found 8087:0024 instead
 [2016-02-03 20:34:50] CTA looking for CTA 1cbe:0003 but found 8086:1c2d instead
 [2016-02-03 20:34:50] CTA looking for CTA 1cbe:0003 but found 8087:0024 instead
 [2016-02-03 20:34:50] CTA looking for CTA 1cbe:0003 but found 1a40:0101 instead
 [2016-02-03 20:34:50] CTA looking for CTA 1cbe:0003 but found 8086:1c26 instead
 [2016-02-03 20:34:50] USB scan devices: checking for HFA devices
 [2016-02-03 20:34:50] HFA looking for HFA 297c:0001 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] HFA looking for HFA 297c:0001 but found 8087:0024 instead
 [2016-02-03 20:34:50] HFA looking for HFA 297c:0001 but found 8086:1c2d instead
 [2016-02-03 20:34:50] HFA looking for HFA 297c:0001 but found 8087:0024 instead
 [2016-02-03 20:34:50] HFA looking for HFA 297c:0001 but found 1a40:0101 instead
 [2016-02-03 20:34:50] HFA looking for HFA 297c:0001 but found 8086:1c26 instead
 [2016-02-03 20:34:50] USB scan devices: checking for HRO devices
 [2016-02-03 20:34:51] HRO looking for HRO 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 20:34:51] HRO looking for HRO 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:51] HRO looking for HRO 0403:6001 but found 8086:1c2d instead
 [2016-02-03 20:34:51] HRO looking for HRO 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:51] HRO looking for HRO 0403:6001 but found 1a40:0101 instead
 [2016-02-03 20:34:51] HRO looking for HRO 0403:6001 but found 8086:1c26 instead
 [2016-02-03 20:34:51] USB scan devices: checking for ICA devices
 [2016-02-03 20:34:51] ICA looking for ICA 067b:2303 but found 10c4:ea60 instead
 [2016-02-03 20:34:51] ICA looking for ICA 1fc9:0083 but found 10c4:ea60 instead
 [2016-02-03 20:34:51] ICA looking for and found AMU 10c4:ea60
 [2016-02-03 20:34:51] USB lock Icarus 1-2
 [2016-02-03 20:34:51] RES: Icarus (1:2) lock=1
 [2016-02-03 20:34:51] USB res lock Icarus 1-2
 [2016-02-03 20:34:51] RES: Icarus (1:2) lock ok=1
 [2016-02-03 20:34:51] USB init - AMU device 1:2 usbver=0110 prod='CP2102 USB to UART Bridge Controller' manuf='Silicon Labs' serial='0001'
 [2016-02-03 20:34:51] AMU 0: send_gold_nonce 4a548fe471fa3a9a1371144556c3f64d2500b4826008fe4bbf7698c94eba794600000000000000000000000000000000aa1ff055ce22a72f4f6726141a0b3287
 [2016-02-03 20:34:51] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 20:34:51] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 20:34:51] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 20:34:51] tries: 3
 [2016-02-03 20:34:51] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:51] Icarus Read: No data for 101 ms
 [2016-02-03 20:34:51] Rockminer nonce_bin: 00 00 00 00 00 00 00 00
 [2016-02-03 20:34:51] detect_one get_gold_nonce error, tries = 3
 [2016-02-03 20:34:51] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 20:34:51] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 20:34:51] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 20:34:51] tries: 2
 [2016-02-03 20:34:51] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:51] Icarus Read: No data for 102 ms
 [2016-02-03 20:34:51] Rockminer nonce_bin: 00 00 00 00 00 00 00 00
 [2016-02-03 20:34:51] detect_one get_gold_nonce error, tries = 2
 [2016-02-03 20:34:51] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 20:34:51] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 20:34:51] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 20:34:51] tries: 1
 [2016-02-03 20:34:51] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:51] Icarus Read: No data for 101 ms
 [2016-02-03 20:34:51] Rockminer nonce_bin: 00 00 00 00 00 00 00 00
 [2016-02-03 20:34:51] detect_one get_gold_nonce error, tries = 1
 [2016-02-03 20:34:51] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 20:34:51] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 20:34:51] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 20:34:51] tries: 0
 [2016-02-03 20:34:51] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:51] Icarus Read: No data for 102 ms
 [2016-02-03 20:34:51] Rockminer nonce_bin: 00 00 00 00 00 00 00 00
 [2016-02-03 20:34:51] detect_one get_gold_nonce error, tries = 0
 [2016-02-03 20:34:51] USB uninit AMU0
 [2016-02-03 20:34:51] USB free AMU
 [2016-02-03 20:34:51] USB unlock Icarus 1-2
 [2016-02-03 20:34:51] ICA looking for ICA 067b:2303 but found 8087:0024 instead
 [2016-02-03 20:34:51 [2016-02-0] 3 2RES: Icarus (0:34:51]1:2) lock=0
ICA looking for ICA 1fc9:0083 but found 8087:0024 instead
 [2016-02-03 20:34:51] USB res unlock Icarus 1-2
 [2016-02-03 20:34:51] ICA looking for AMU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for LIN 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for ANU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for BLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for LLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for CMR 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for CMR 0403:8350 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for ICA 067b:2303 but found 8086:1c2d instead
 [2016-02-03 20:34:51] ICA looking for ICA 1fc9:0083 but found 8086:1c2d instead
 [2016-02-03 20:34:51] ICA looking for AMU 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 20:34:51] ICA looking for LIN 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 20:34:51] ICA looking for ANU 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 20:34:51] ICA looking for BLT 0403:6001 but found 8086:1c2d instead
 [2016-02-03 20:34:51] ICA looking for LLT 0403:6001 but found 8086:1c2d instead
 [2016-02-03 20:34:51] ICA looking for CMR 0403:6014 but found 8086:1c2d instead
 [2016-02-03 20:34:51] ICA looking for CMR 0403:8350 but found 8086:1c2d instead
 [2016-02-03 20:34:51] ICA looking for ICA 067b:2303 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for ICA 1fc9:0083 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for AMU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for LIN 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for ANU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for BLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for LLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for CMR 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for CMR 0403:8350 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for ICA 067b:2303 but found 1a40:0101 instead
 [2016-02-03 20:34:51] ICA looking for ICA 1fc9:0083 but found 1a40:0101 instead
 [2016-02-03 20:34:51] ICA looking for AMU 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 20:34:51] ICA looking for LIN 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 20:34:51] ICA looking for ANU 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 20:34:51] ICA looking for BLT 0403:6001 but found 1a40:0101 instead
 [2016-02-03 20:34:51] ICA looking for LLT 0403:6001 but found 1a40:0101 instead
 [2016-02-03 20:34:51] ICA looking for CMR 0403:6014 but found 1a40:0101 instead
 [2016-02-03 20:34:51] ICA looking for CMR 0403:8350 but found 1a40:0101 instead
 [2016-02-03 20:34:51] ICA looking for ICA 067b:2303 but found 8086:1c26 instead
 [2016-02-03 20:34:51] ICA looking for ICA 1fc9:0083 but found 8086:1c26 instead
 [2016-02-03 20:34:51] ICA looking for AMU 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 20:34:51] ICA looking for LIN 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 20:34:51] ICA looking for ANU 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 20:34:51] ICA looking for BLT 0403:6001 but found 8086:1c26 instead
 [2016-02-03 20:34:51] ICA looking for LLT 0403:6001 but found 8086:1c26 instead
 [2016-02-03 20:34:51] ICA looking for CMR 0403:6014 but found 8086:1c26 instead
 [2016-02-03 20:34:51] ICA looking for CMR 0403:8350 but found 8086:1c26 instead
 [2016-02-03 20:34:51] USB scan devices: checking for ICA devices
 [2016-02-03 20:34:51] ICA looking for ICA 067b:2303 but found 10c4:ea60 instead
 [2016-02-03 20:34:51] ICA looking for ICA 1fc9:0083 but found 10c4:ea60 instead
 [2016-02-03 20:34:51] ICA looking for and found AMU 10c4:ea60
 [2016-02-03 20:34:51] USB lock Icarus 1-2
 [2016-02-03 20:34:51] RES: Icarus (1:2) lock=1
 [2016-02-03 20:34:51] USB res lock Icarus 1-2
 [2016-02-03 20:34:51] RES: Icarus (1:2) lock ok=1
 [2016-02-03 20:34:52] USB init - AMU device 1:2 usbver=0110 prod='CP2102 USB to UART Bridge Controller' manuf='Silicon Labs' serial='0001'
 [2016-02-03 20:34:52] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:52] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 20:34:52] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 20:34:52] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 20:34:52] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:52] Icarus Read: No data for 302 ms
 [2016-02-03 20:34:52] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:52] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 20:34:52] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 20:34:52] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 20:34:52] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:52] Icarus Read: No data for 301 ms
 [2016-02-03 20:34:52] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:52] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 20:34:52] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 20:34:52] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 20:34:52] Send ANU voltage aab775de
 [2016-02-03 20:34:53] AMU 0: Send frequency 8208821c
 [2016-02-03 20:34:53] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:53] AMU 0: Send freq getstatus 84000400
 [2016-02-03 20:34:53] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:53] AU3 0: Detected Antminer U3
 [2016-02-03 20:34:53] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:53] Icarus Read: No data for 301 ms
 [2016-02-03 20:34:54] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:54] AU3: cgid 0 EnableUART got err 0
 [2016-02-03 20:34:54] AU3: cgid 0 SetDataCtrl got err 0
 [2016-02-03 20:34:54] AU3: cgid 0 SetBaud got err 4
 [2016-02-03 20:34:54] Send ANU voltage aab775de
 [2016-02-03 20:34:54] AU3 0: Send frequency 8208821c
 [2016-02-03 20:34:54] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:54] AU3 0: Send freq getstatus 84000400
 [2016-02-03 20:34:54] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:54] AU3 0: Detected Antminer U3
 [2016-02-03 20:34:55] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:55] Icarus Read: No data for 302 ms
 [2016-02-03 20:34:55] USB uninit AU30
 [2016-02-03 20:34:55] USB free AMU
 [2016-02-03 20:34:55] USB unlock Icarus 1-2
 [2016-02-03 20:34:55] ICA looking for ICA 067b:2303 but found 8087:0024 instead
 [2016-02-03 20:34:55] RES: Icarus (1:2) lock=0
 [2016-02-03 20:34:55] ICA looking for ICA 1fc9:0083 but found 8087:0024 instead
 [2016-02-03 20:34:55] USB res unlock Icarus 1-2
 [2016-02-03 20:34:55] ICA looking for AMU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for LIN 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for ANU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for BLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for LLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for CMR 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for CMR 0403:8350 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for ICA 067b:2303 but found 8086:1c2d instead
 [2016-02-03 20:34:55] ICA looking for ICA 1fc9:0083 but found 8086:1c2d instead
 [2016-02-03 20:34:55] ICA looking for AMU 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 20:34:55] ICA looking for LIN 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 20:34:55] ICA looking for ANU 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 20:34:55] ICA looking for BLT 0403:6001 but found 8086:1c2d instead
 [2016-02-03 20:34:55] ICA looking for LLT 0403:6001 but found 8086:1c2d instead
 [2016-02-03 20:34:55] ICA looking for CMR 0403:6014 but found 8086:1c2d instead
 [2016-02-03 20:34:55] ICA looking for CMR 0403:8350 but found 8086:1c2d instead
 [2016-02-03 20:34:55] ICA looking for ICA 067b:2303 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for ICA 1fc9:0083 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for AMU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for LIN 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for ANU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for BLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for LLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for CMR 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for CMR 0403:8350 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for ICA 067b:2303 but found 1a40:0101 instead
 [2016-02-03 20:34:55] ICA looking for ICA 1fc9:0083 but found 1a40:0101 instead
 [2016-02-03 20:34:55] ICA looking for AMU 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 20:34:55] ICA looking for LIN 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 20:34:55] ICA looking for ANU 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 20:34:55] ICA looking for BLT 0403:6001 but found 1a40:0101 instead
 [2016-02-03 20:34:55] ICA looking for LLT 0403:6001 but found 1a40:0101 instead
 [2016-02-03 20:34:55] ICA looking for CMR 0403:6014 but found 1a40:0101 instead
 [2016-02-03 20:34:55] ICA looking for CMR 0403:8350 but found 1a40:0101 instead
 [2016-02-03 20:34:55] ICA looking for ICA 067b:2303 but found 8086:1c26 instead
 [2016-02-03 20:34:55] ICA looking for ICA 1fc9:0083 but found 8086:1c26 instead
 [2016-02-03 20:34:55] ICA looking for AMU 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 20:34:55] ICA looking for LIN 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 20:34:55] ICA looking for ANU 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 20:34:55] ICA looking for BLT 0403:6001 but found 8086:1c26 instead
 [2016-02-03 20:34:55] ICA looking for LLT 0403:6001 but found 8086:1c26 instead
 [2016-02-03 20:34:55] ICA looking for CMR 0403:6014 but found 8086:1c26 instead
 [2016-02-03 20:34:55] ICA looking for CMR 0403:8350 but found 8086:1c26 instead
 [2016-02-03 20:34:55] USB scan devices: checking for KLN devices
 [2016-02-03 20:34:55] KLN looking for KLN 04d8:f60a but found 10c4:ea60 instead
 [2016-02-03 20:34:55] KLN looking for KLI 04d8:f60a but found 10c4:ea60 instead
 [2016-02-03 20:34:55] KLN looking for KLN 04d8:f60a but found 8087:0024 instead
 [2016-02-03 20:34:55] KLN looking for KLI 04d8:f60a but found 8087:0024 instead
 [2016-02-03 20:34:55] KLN looking for KLN 04d8:f60a but found 8086:1c2d instead
 [2016-02-03 20:34:55] KLN looking for KLI 04d8:f60a but found 8086:1c2d instead
 [2016-02-03 20:34:55] KLN looking for KLN 04d8:f60a but found 8087:0024 instead
 [2016-02-03 20:34:55] KLN looking for KLI 04d8:f60a but found 8087:0024 instead
 [2016-02-03 20:34:55] KLN looking for KLN 04d8:f60a but found 1a40:0101 instead
 [2016-02-03 20:34:55] KLN looking for KLI 04d8:f60a but found 1a40:0101 instead
 [2016-02-03 20:34:55] KLN looking for KLN 04d8:f60a but found 8086:1c26 instead
 [2016-02-03 20:34:55] KLN looking for KLI 04d8:f60a but found 8086:1c26 instead
 [2016-02-03 20:34:55] USB scan devices: checking for DRB devices
 [2016-02-03 20:34:55] DRB looking for DRB 03eb:2404 but found 10c4:ea60 instead
 [2016-02-03 20:34:55] DRB looking for DRB 03eb:2404 but found 8087:0024 instead
 [2016-02-03 20:34:55] DRB looking for DRB 03eb:2404 but found 8086:1c2d instead
 [2016-02-03 20:34:55] DRB looking for DRB 03eb:2404 but found 8087:0024 instead
 [2016-02-03 20:34:55] DRB looking for DRB 03eb:2404 but found 1a40:0101 instead
 [2016-02-03 20:34:55] DRB looking for DRB 03eb:2404 but found 8086:1c26 instead
 [2016-02-03 20:34:55] No devices detected!
 [2016-02-03 20:34:55] Waiting for USB hotplug devices or press q to quit
 [2016-02-03 20:34:55] Probing for an alive pool
 [2016-02-03 20:34 [2016-02-03 :520:34:55] Testing pool s5tratum+tcp://p2p.ant] pool.com:25
Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-03 20:34:56] Select timeout/failed connect
 [2016-02-03 20:34:56] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-03 20:34:56] Initiate stratum failed
 [2016-02-03 20:34:57] Select timeout/failed connect
 [2016-02-03 20:34:58] Select timeout/failed connect
 [2016-02-03 20:34:58] Failed to connect to stratum on stratum.antpool.com:3336
 [2016-02-03 20:34:58] Initiate stratum failed
 [2016-02-03 20:35:01] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-03 20:35:02] Select timeout/failed connect
 [2016-02-03 20:35:02] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-03 20:35:02] Initiate stratum failed
 [2016-02-03 20:35:03] Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-03 20:35:04] Select timeout/failed connect
 [2016-02-03 20:35:05] Select timeout/failed connect
 [2016-02-03 20:35:05] Failed to connect to stratum on stratum.antpool.com:3336
 [2016-02-03 20:35:05] Initiate stratum failed
 [2016-02-03 20:35:07] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-03 20:35:08] Select timeout/failed connect
 [2016-02-03 20:35:08] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-03 20:35:08] Initiate stratum failed
 [2016-02-03 20:35:10] Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-03 20:35:11] Select timeout/failed connect
 [2016-02-03 20:35:12] Select timeout/failed connect
 [2016-02-03 20:35:12] Failed to connect to stratum on stratum.antpool.com:3336
 [2016-02-03 20:35:12] Initiate stratum failed
 [2016-02-03 20:35:13] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-03 20:35:14] Select timeout/failed connect
 [2016-02-03 20:35:14] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-03 20:35:14] Initiate stratum failed
 [2016-02-03 20:35:17] Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-03 20:35:18] Select timeout/failed connect
 [2016-02-03 20:35:19] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-03 20:35:19] Select timeout/failed connect
 [2016-02-03 20:35:19] Failed to connect to stratum on stratum.antpool.com:3336
 [2016-02-03 20:35:19] Initiate stratum failed
 [2016-02-03 20:35:20] Select timeout/failed connect
 [2016-02-03 20:35:20] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-03 20:35:20] Initiate stratum failed
 [2016-02-03 20:35:24] Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-03 20:35:25] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-03 20:35:26] Select timeout/failed connect
 [2016-02-03 20:35:26] Select timeout/failed connect
 [2016-02-03 20:35:26] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-03 20:35:26] Initiate stratum failed
 [2016-02-03 20:35:27] Select timeout/failed connect
 [2016-02-03 20:35:27] Failed to connect to stratum on stratum.antpool.com:3336
 [2016-02-03 20:35:27] Initiate stratum failed
 [2016-02-03 20:35:31] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-03 20:35:32] Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-03 20:35:32] Select timeout/failed connect
 [2016-02-03 20:35:32] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-03 20:35:32] Initiate stratum failed
 [2016-02-03 20:35:33] Select timeout/failed connect
 [2016-02-03 20:35:34] Select timeout/failed connect
 [2016-02-03 20:35:34] Failed to connect to stratum on stratum.antpool.com:3336
 [2016-02-03 20:35:34] Initiate stratum failed
 [2016-02-03 20:35:37] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-03 20:35:38] Select timeout/failed connect
 [2016-02-03 20:35:38] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-03 20:35:38] Initiate stratum failed
 [2016-02-03 20:35:39] Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-03 20:35:40] Select timeout/failed connect
 [2016-02-03 20:35:41] Select timeout/failed connect
 [2016-02-03 20:35:41] Failed to connect to stratum on stratum.antpool.com:3336
 [2016-02-03 20:35:41] Initiate stratum failed
 [2016-02-03 20:35:43] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-03 20:35:44] Select timeout/failed connect
 [2016-02-03 20:35:44] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-03 20:35:44] Initiate stratum failed
 [2016-02-03 20:35:46] Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-03 20:35:47] Select timeout/failed connect
 [2016-02-03 20:35:48] Select timeout/failed connect
 [2016-02-03 20:35:48] Failed to connect to stratum on stratum.antpool.com:3336
 [2016-02-03 20:35:48] Initiate stratum failed
 [2016-02-03 20:35:49] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-03 20:35:50] Select timeout/failed connect
 [2016-02-03 20:35:50] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-03 20:35:50] Initiate stratum failed
 [2016-02-03 20:35:53] Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-03 20:35:54] Select timeout/failed connect
 [2016-02-03 20:35:55] No servers were found that could be used to get work from.
 [2016-02-03 20:35:55] Please check the details from the list below of the servers you have input
 [2016-02-03 20:35:55] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
 [2016-02-03 20:35:55] Pool: 0  URL: stratum+tcp://stratum.antpool.com:3336  User: antminer_1  Password:
 [2016-02-03 20:35:55] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-03 20:35:55] Pool: 1  URL: stratum+tcp://p2p.antpool.com:25  User: antminer_2  Password:
 [2016-02-03 20:35:55] Press any key to exit, or cgminer will wait indefinitely for an alive pool.
 [2016-02-03 20:35:55] No servers could be used! Exiting.
zOU
hero member
Activity: 728
Merit: 500
★ these are stars ★
February 03, 2016, 12:25:00 PM
[2016-02-01 16:44:17] Started cgminer 4.8.0

use 4.9.2 Smiley
legendary
Activity: 1274
Merit: 1000
February 03, 2016, 12:24:31 PM
Some one can help me with my U3?
cgminer can't load it.
Did you run zadig?  Did it install the driver properly?  Can you see the U3 in your device manager?

Use the latest release of cgminer, 4.9.2.
newbie
Activity: 3
Merit: 0
February 03, 2016, 12:13:59 PM
Some one can help me with my U3?
cgminer can't load it.

Follow log

Code:
[2016-02-01 16:44:17] Started cgminer 4.8.0
 [2016-02-01 16:44:17] USB scan devices: checking for BTM devices
 [2016-02-01 16:44:17] RES: thread starting
 [2016-02-01 16:44:18] BTM looking for ICA 067b:2303 but found 10c4:ea60 instead
 [2016-02-01 16:44:18] BTM looking for and found AMU 10c4:ea60
 [2016-02-01 16:44:18] USB lock Bitmain 1-1
 [2016-02-01 16:44:18] RES: Bitmain (1:1) lock=1
 [2016-02-01 16:44:18] USB res lock Bitmain 1-1
 [2016-02-01 16:44:18] RES: Bitmain (1:1) lock ok=1
 [2016-02-01 16:44:18] USB init - AMU device 1:1 usbver=0110 prod='CP2102 USB to UART Bridge Controller' manuf='Silicon Labs' serial='0001'
 [2016-02-01 16:44:18] AMU: cgid 0 EnableUART got err 0
 [2016-02-01 16:44:18] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-01 16:44:18] AMU: cgid 0 SetBaud got err 4
 [2016-02-01 16:44:18] ---------------------start voltage----------------------
 [2016-02-01 16:44:18] Send voltage aab755c2
 [2016-02-01 16:44:18] Send voltage ok
 [2016-02-01 16:44:18] Device detect freq parameter=0882
 [2016-02-01 16:44:18] Set_frequency cmd_buf[1]{08}cmd_buf[2]{82}
 [2016-02-01 16:44:18] -----------------start freq-------------------
 [2016-02-01 16:44:19] Send frequency 8208821c
 [2016-02-01 16:44:19] Send frequency ok
 [2016-02-01 16:44:20] Send freq getstatus 84000400
 [2016-02-01 16:44:20] AMU0: GetResults (amt=0 err=-7 ern=0)
 [2016-02-01 16:44:20] AMU0: GetResults (amt=0 err=-7 ern=0)
 [2016-02-01 16:44:20] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:20] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:20] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:21] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:21] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:21] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:21] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:22] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:22] Send freq getstatus ok
 [2016-02-01 16:44:22] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:22] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:22] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:22] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:23] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:23] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:23] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:23] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:24] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:24] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:24] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:24] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:24] Send freq getstatus 84000400
 [2016-02-01 16:44:24] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:25] Send freq getstatus ok
 [2016-02-01 16:44:25] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:25] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:25] ------recv freq getstatus no data finish------
 [2016-02-01 16:44:26] -----------------start nonce------------------
 [2016-02-01 16:44:26] Bmsc send golden nonce1
 [2016-02-01 16:44:26] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:26] Bmsc Read: No data for 565 ms
 [2016-02-01 16:44:26] Bmsc recv golden nonce timeout
 [2016-02-01 16:44:27] AMU: cgid 0 EnableUART got err 0
 [2016-02-01 16:44:27] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-01 16:44:27] AMU: cgid 0 SetBaud got err 4
 [2016-02-01 16:44:27] ---------------------start voltage----------------------
 [2016-02-01 16:44:27] Send voltage aab755c2
 [2016-02-01 16:44:27] Send voltage ok
 [2016-02-01 16:44:27] Device detect freq parameter=0882
 [2016-02-01 16:44:27] Set_frequency cmd_buf[1]{08}cmd_buf[2]{82}
 [2016-02-01 16:44:27] -----------------start freq-------------------
 [2016-02-01 16:44:28] Send frequency 8208821c
 [2016-02-01 16:44:28] Send frequency ok
 [2016-02-01 16:44:28] Send freq getstatus 84000400
 [2016-02-01 16:44:28] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:29] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:29] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:30] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:30] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:30] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:31] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:31] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:31] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:31] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:32] Send freq getstatus ok
 [2016-02-01 16:44:32] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:32] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:32] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:32] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:33] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:33] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:33] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:33] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:33] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:33] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:34] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:34] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:34] ------recv freq getstatus no data finish------
 [2016-02-01 16:44:35] -----------------start nonce------------------
 [2016-02-01 16:44:35] Bmsc send golden nonce1
 [2016-02-01 16:44:35] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:35] Bmsc Read: No data for 709 ms
 [2016-02-01 16:44:36] Bmsc recv golden nonce timeout
 [2016-02-01 16:44:36] USB uninit AMU0
 [2016-02-01 16:44:36] USB free AMU
 [2016-02-01 16:44:36] USB unlock Bitmain 1-1
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 8086:265c instead
 [2016-02-01 16:44:36] RES: Bitmain (1:1) lock=0
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 8086:265c instead
 [2016-02-01 16:44:36] USB res unlock Bitmain 1-1
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 8086:265c instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 8086:265c instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 8086:265c instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 8086:265c instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 8086:265c instead
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 1033:0194 instead
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 1033:0194 instead
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 1033:0194 instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 1033:0194 instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 1033:0194 instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 1033:0194 instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 1033:0194 instead
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 8086:2658 instead
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 8086:2658 instead
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 8086:2658 instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 8086:2658 instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 8086:2658 instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 8086:2658 instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 8086:2658 instead
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 203a:fffa instead
 [2016-02-01 16:44:36] No devices detected!
 [2016-02-01 16:44:36] Waiting for USB hotplug devices or press q to quit
 [2016-02-01 16:44:36] Probing for an alive pool
 [2016-02-01 16:44:36] Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-01 16:44:36] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-01 16:44:37] Select timeout/failed connect
 [2016-02-01 16:44:37] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-01 16:44:37] Initiate stratum failed
 [2016-02-01 16:44:37] Select timeout/failed connect
 [2016-02-01 16:44:38] Select timeout/failed connect
 [2016-02-01 16:44:38] Failed to connect to stratum on stratum.antpool.com:3336
 [2016-02-01 16:44:38] Initiate stratum failed
 [2016-02-01 16:44:42] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-01 16:44:43] Select timeout/failed connect
 [2016-02-01 16:44:43] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-01 16:44:43] Initiate stratum failed
 [2016-02-01 16:44:43] Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-01 16:44:44] Select timeout/failed connect
 [2016-02-01 16:44:45] Select timeout/failed connect
 [2016-02-01 16:44:45] Failed to connect to stratum on stratum.antpool.com:3336
 [2016-02-01 16:44:45] Initiate stratum failed

Really thanks for help!
legendary
Activity: 1456
Merit: 1000
February 02, 2016, 10:38:23 PM
Hello.

I have two U3 with raspberry powered via PSU standard.

I had got a lot of problem (zombie, low hash,... ) until I compiled de bitmain cgminer version: https://github.com/bitmaintech/cgminer

After compiling and executing that version the U3 works flawlessly, no zombies and stable hashing...



When you say no zombies how long has it been up?  Long term was hat I always had issues with when I had 3, although I don't think I tried that version.

Thanks for sharing though.

I had the antminer u3 from about 2015 august with no zombies at all and very stable hashing.

Well you are very lucky and one of very few with out automation.  To be honest it's kinda hard to believe months of it hashing without zombies.   Just most of these did not fair that well with zombies.
Pages:
Jump to: