Any word on amd vega hash rates? - page 85.

bytiges

full member

Activity: 196

Merit: 100

Quote from: Permonik on November 01, 2017, 02:58:31 PM

Hi,
For now, rig is still stable for 22h and all 9 cards mining.
If its hold another 22h I started to thinking that the main issue is card/riser inside 16x slot... I had gen1 on all slots...
Gpu is 905 and mem 900. On the wall is about 1350W for whole system...

I removed the card from the x16 slot too. 2h stable now. Let's see if it holds.

Michael20

member

Activity: 118

Merit: 10

How much ram need for 2vega? Is 4gb ok, with enough virtual memory?

bytiges

full member

Activity: 196

Merit: 100

Quote from: Marvell2 on November 02, 2017, 03:41:00 AM

fuck me i bought 3 at 469 too fuck u newegg

Don't cry too much. Vega 56 best price in EU is 560$. We pay 20%+ VAT tax.
I would buy a truck load of Vega at $399 tough.

Marvell2

full member

Activity: 1148

Merit: 132

Quote from: Permonik on November 02, 2017, 02:41:13 AM

Quote from: rustin898 on November 01, 2017, 08:31:50 PM

Quote from: Permonik on November 01, 2017, 02:58:31 PM

For now, rig is still stable for 22h and all 9 cards mining.
If its hold another 22h I started to thinking that the main issue is card/riser inside 16x slot... I had gen1 on all slots...
Gpu is 905 and mem 900. On the wall is about 1350W for whole system...

Each card gives 2kh/s ? 9x Vega=18khs?

Hi,
No, it gives around 1,25 per card, because I did not find option in wattman for switching to compute mode.
For now its stable more than 33h.
I think that main problem with unstabillity was that 16x slot on mobo...

fuck me i bought 3 at 469 too fuck u newegg

bytiges

full member

Activity: 196

Merit: 100

399 is a hell of a price for the Vega56. For monero it'a a killer. But at this price it's good for ETH too

Permonik

member

Activity: 275

Merit: 11

Quote from: rustin898 on November 01, 2017, 08:31:50 PM

Quote from: Permonik on November 01, 2017, 02:58:31 PM

For now, rig is still stable for 22h and all 9 cards mining.
If its hold another 22h I started to thinking that the main issue is card/riser inside 16x slot... I had gen1 on all slots...
Gpu is 905 and mem 900. On the wall is about 1350W for whole system...

Each card gives 2kh/s ? 9x Vega=18khs?

Hi,
No, it gives around 1,25 per card, because I did not find option in wattman for switching to compute mode.
For now its stable more than 33h.
I think that main problem with unstabillity was that 16x slot on mobo...

tf2addict

full member

Activity: 675

Merit: 100

Quote from: Morgon on November 01, 2017, 10:49:55 PM

Quote from: P00P135 on November 01, 2017, 09:16:46 PM

They are 399
https://www.newegg.com/Product/Product.aspx?Item=N82E16814202302&

Holy hell, bought 4 of the Gigabyte branded ones 10 days ago. Sent an email to Newegg CS, I sure hope they honor their own price...

I bought one at $469 with a $20 rebate just three days ago! I am kind of pissed. I may just send it back. Let us know if they give you a refund for the difference. I suspect they won't.

Morgon

member

Activity: 75

Merit: 10

Quote from: P00P135 on November 01, 2017, 09:16:46 PM

They are 399
https://www.newegg.com/Product/Product.aspx?Item=N82E16814202302&

Holy hell, bought 4 of the Gigabyte branded ones 10 days ago. Sent an email to Newegg CS, I sure hope they honor their own price...

tf2addict

full member

Activity: 675

Merit: 100

Quote from: P00P135 on November 01, 2017, 09:16:46 PM

Quote from: tf2addict on November 01, 2017, 08:48:01 PM

Quote from: BlockMedx on October 31, 2017, 10:15:13 AM

But these Vega cards are sooooo expensive! I will be sticking with the 1080ti's for the foreseeable future. How long will it take to see ROI with the Vega's?

I just picked up a Vega 56 for $449 after rebate. That makes it very competitive, especially if you can get the 1850 H/s with Monero.

They are 399
https://www.newegg.com/Product/Product.aspx?Item=N82E16814202302&

Man the price dropped $50 since Sunday! My timing always sucks at EVERYTHING.

P00P135

full member

Activity: 1123

Merit: 136

Quote from: tf2addict on November 01, 2017, 08:48:01 PM

Quote from: BlockMedx on October 31, 2017, 10:15:13 AM

But these Vega cards are sooooo expensive! I will be sticking with the 1080ti's for the foreseeable future. How long will it take to see ROI with the Vega's?

I just picked up a Vega 56 for $449 after rebate. That makes it very competitive, especially if you can get the 1850 H/s with Monero.

They are 399
https://www.newegg.com/Product/Product.aspx?Item=N82E16814202302&

tf2addict

full member

Activity: 675

Merit: 100

Quote from: BlockMedx on October 31, 2017, 10:15:13 AM

But these Vega cards are sooooo expensive! I will be sticking with the 1080ti's for the foreseeable future. How long will it take to see ROI with the Vega's?

I just picked up a Vega 56 for $449 after rebate. That makes it very competitive, especially if you can get the 1850 H/s with Monero.

rustin898

newbie

Activity: 7

Merit: 0

Quote from: Permonik on November 01, 2017, 02:58:31 PM

For now, rig is still stable for 22h and all 9 cards mining.
If its hold another 22h I started to thinking that the main issue is card/riser inside 16x slot... I had gen1 on all slots...
Gpu is 905 and mem 900. On the wall is about 1350W for whole system...

Each card gives 2kh/s ? 9x Vega=18khs?

Permonik

member

Activity: 275

Merit: 11

Quote from: bytiges on November 01, 2017, 02:25:14 PM

Quote from: Permonik on October 31, 2017, 06:18:08 AM

Hi,
Someone told me that hanging of stak-xmr can be caused by gpu inside the 16x pci-e slot on asrock 110 btc, so I will try to connect the card to another slot.
I am experiencing the system freezing too, the longest run was 20h.
And today, I will try new driver with 10x vegas64.

I too have one of theh cards in the 16x pci-e slot of the H110. I had to set the slot Gen2 communication or I was having issues with the card going to stand at times.

Shall I go to Gen1 (using the risers) instead ?

Hi,
For now, rig is still stable for 22h and all 9 cards mining.
If its hold another 22h I started to thinking that the main issue is card/riser inside 16x slot... I had gen1 on all slots...
Gpu is 905 and mem 900. On the wall is about 1350W for whole system...

bytiges

full member

Activity: 196

Merit: 100

Quote from: Permonik on October 31, 2017, 06:18:08 AM

Hi,
Someone told me that hanging of stak-xmr can be caused by gpu inside the 16x pci-e slot on asrock 110 btc, so I will try to connect the card to another slot.
I am experiencing the system freezing too, the longest run was 20h.
And today, I will try new driver with 10x vegas64.

I too have one of theh cards in the 16x pci-e slot of the H110. I had to set the slot Gen2 communication or I was having issues with the card going to stand at times.

Shall I go to Gen1 (using the risers) instead ?

bytiges

full member

Activity: 196

Merit: 100

Quote from: BogdanCo on October 31, 2017, 12:35:26 PM

I also use Sapphire cards and yes stak-xmr uses more power than cast-xmr, I noticed also

If you lower the speed of HBM it's useless.
I found why my rig was shutting down (I think), I changed the power plan, monitor -> turn off - never; HDD -> turn off - never, and so on... Without these setting many times after 30 - 60 min since I closed the connection thru teamviewer, my rig either was shutting down or froze. I see now it's working, hope this was the issue.

So, I raised my voltages somewhat (920-930) and used cast-xmr. I did a straight 24h run with no issues.

I then reboot the rig and with the same settings I started stak-amd: within 30 minutes one card stopped mining and the whole rig hung. There is something definitely bad that stak amd brings up from my rig, but still cannot pinpoint it.

Now I'm back to lower voltages on cast xmr to see if it's stable.

BogdanCo

hero member

Activity: 729

Merit: 513

Quote from: Permonik on November 01, 2017, 01:06:21 AM

Quote from: MingMining on October 31, 2017, 11:29:57 PM

Quote from: Permonik on October 31, 2017, 07:04:21 PM

Hi guys, I am just, spent 9hours of installing 10x vegas 64 sapphire limited edition. I am was able to install only 9gpus, because of the asrock mobo 110 pro btc. 9 gpus just boot fine, but when 10gpus was installed the mobo just stop working, no booting no sign of anything. I am check everything, even the swapping of risers, gpus, slots was without succes...
But anyway 9gpus are in w10 and they are mining. 1350W on wall, but only 1150h for card. Even I did not saw the compute option in wattman! How it is possible? What about igpu as primary display?

Read the guide here:

https://www.reddit.com/r/MoneroMining/comments/74hjqn/monero_and_vega_the_definitive_guide/

and here:

https://bitcointalksearch.org/topic/m.23619746

Hope this help.

Hi,
Sure, that I red. This guide works fine, but only with the old blockchain driver and only for 8gpus.
What I want is 10x gpus working on single board, so I hope that new driver from last week will worked. But as I said, compute option in wattman missing for me... And whats really irritates me is asrock mobo I do not know why 9gpus working and 10gpus not. Is there someone with 10x vegas working on that board?

Compute option is not available for Vega yet. I also spent the last month installing and reinstalling drivers for my 8x Vega64 rig. The best config I get with the blockchain drivers and with the softpower mod.

keksov

newbie

Activity: 13

Merit: 0

Quote from: Permonik on October 30, 2017, 04:06:57 AM

Hi guys,
Someone try new drivers 17.10.3?
I am also curious if someone prepare new power tables.

Same as 17.10.2 -> 1300 H/s XMR

Permonik

member

Activity: 275

Merit: 11

Quote from: MingMining on October 31, 2017, 11:29:57 PM

Quote from: Permonik on October 31, 2017, 07:04:21 PM

Hi guys, I am just, spent 9hours of installing 10x vegas 64 sapphire limited edition. I am was able to install only 9gpus, because of the asrock mobo 110 pro btc. 9 gpus just boot fine, but when 10gpus was installed the mobo just stop working, no booting no sign of anything. I am check everything, even the swapping of risers, gpus, slots was without succes...
But anyway 9gpus are in w10 and they are mining. 1350W on wall, but only 1150h for card. Even I did not saw the compute option in wattman! How it is possible? What about igpu as primary display?

Read the guide here:

https://www.reddit.com/r/MoneroMining/comments/74hjqn/monero_and_vega_the_definitive_guide/

and here:

https://bitcointalksearch.org/topic/m.23619746

Hope this help.

Hi,
Sure, that I red. This guide works fine, but only with the old blockchain driver and only for 8gpus.
What I want is 10x gpus working on single board, so I hope that new driver from last week will worked. But as I said, compute option in wattman missing for me... And whats really irritates me is asrock mobo I do not know why 9gpus working and 10gpus not. Is there someone with 10x vegas working on that board?

Zakyn

newbie

Activity: 20

Merit: 0

Quote from: MingMining on October 31, 2017, 11:29:57 PM

Quote from: Permonik on October 31, 2017, 07:04:21 PM

Hi guys, I am just, spent 9hours of installing 10x vegas 64 sapphire limited edition. I am was able to install only 9gpus, because of the asrock mobo 110 pro btc. 9 gpus just boot fine, but when 10gpus was installed the mobo just stop working, no booting no sign of anything. I am check everything, even the swapping of risers, gpus, slots was without succes...
But anyway 9gpus are in w10 and they are mining. 1350W on wall, but only 1150h for card. Even I did not saw the compute option in wattman! How it is possible? What about igpu as primary display?

Read the guide here:

https://www.reddit.com/r/MoneroMining/comments/74hjqn/monero_and_vega_the_definitive_guide/

and here:

https://bitcointalksearch.org/topic/m.23619746

Hope this help.

Personally, I have stopped trying for any Vega over 8. I find it is semi flaky and increasing it to 9 or even 10 is really more for bragging rights. I have now gone to 7 / 8 card configuration.

MingMining

member

Activity: 202

Merit: 10

Eloncoin.org - Mars, here we come!

Quote from: Permonik on October 31, 2017, 07:04:21 PM

Hi guys, I am just, spent 9hours of installing 10x vegas 64 sapphire limited edition. I am was able to install only 9gpus, because of the asrock mobo 110 pro btc. 9 gpus just boot fine, but when 10gpus was installed the mobo just stop working, no booting no sign of anything. I am check everything, even the swapping of risers, gpus, slots was without succes...
But anyway 9gpus are in w10 and they are mining. 1350W on wall, but only 1150h for card. Even I did not saw the compute option in wattman! How it is possible? What about igpu as primary display?

Read the guide here:

https://www.reddit.com/r/MoneroMining/comments/74hjqn/monero_and_vega_the_definitive_guide/

and here:

https://bitcointalksearch.org/topic/m.23619746

Hope this help.

Topic: Any word on amd vega hash rates? - page 85. (Read 202725 times)