Any word on amd vega hash rates? - page 88.

bytiges

full member

Activity: 196

Merit: 100

Quote from: ingyenfrag on October 30, 2017, 10:52:26 AM

Quote from: bytiges on October 30, 2017, 10:31:51 AM

I have one of the Vega cards showing a green led when initialized. It cannot be used for mining. Anyone knows what this green led is ? (it's on the right of the blue/red stripe of leds).

The card works normally when used alone. It's making this thing when used with others.

What do you mean cannot be used for mining? What's happening when you try multi card mining?

I mean the card cannot be used/initialized: it's there but blocks when accessed.

I fixed the problem. It was the card in the x16 slot of the mobo. The fix was to use Gen2 protocol and not Gen3. I think the problem is the driver. It would do this "green" led when the card was activated and there were other cards activated too. it started doing it after a hard reset (lockup).

Nevermind, we're all waiting for better drivers, until then life is what it is

I would not mind knowing what that green led means. It's normally off but seems to light up on issues.

l1xx

member

Activity: 115

Merit: 10

Quote from: bytiges on October 30, 2017, 10:31:51 AM

I have one of the Vega cards showing a green led when initialized. It cannot be used for mining. Anyone knows what this green led is ? (it's on the right of the blue/red stripe of leds).

The card works normally when used alone. It's making this thing when used with others.

I've seen this only when its powered, but not connected to the board.

ingyenfrag

newbie

Activity: 84

Merit: 0

Quote from: bytiges on October 30, 2017, 10:31:51 AM

I have one of the Vega cards showing a green led when initialized. It cannot be used for mining. Anyone knows what this green led is ? (it's on the right of the blue/red stripe of leds).

The card works normally when used alone. It's making this thing when used with others.

What do you mean cannot be used for mining? What's happening when you try multi card mining?

bytiges

full member

Activity: 196

Merit: 100

I have one of the Vega cards showing a green led when initialized. It cannot be used for mining. Anyone knows what this green led is ? (it's on the right of the blue/red stripe of leds).

The card works normally when used alone. It's making this thing when used with others.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: jadefalke on October 30, 2017, 06:01:16 AM

Quote from: philipma1957 on October 28, 2017, 05:55:26 PM

Quote from: xs.over on October 28, 2017, 05:39:19 PM

Ledipaa, Your calculator is wrong. Two rx on eth in dual with dcr currently gives ~$90/month. While unstable working Vega 56 on monero ~85.

power used for 2 rx on eth with dcr vs power used for 1x 56 mining monero

I see claims with 140 watts for 2000 hash on vega's doing monero

I know 2x rx 470's 480's 570's or 580's will use more then 140 watts

so form factor a good board could do very well with vega 56's

I have this board on order. comes on monday

seems really good to run 4 vega 56's with endless spacing for cooling

but right now I am almost all nvidia mostly because of a few more coin choices

interesting, where did you order that one and for which price? Could only find a chinese Page.

It is due today if it is any good I am buying 10-15.

the sample was

120 = mobo
50 = dhl
8 = paypal fee

178 usd china to new jersey usa

if I buy 15 I will be selling some.

review will be here

https://bitcointalk.org/index.php?topic=2138550.1020

jadefalke

legendary

Activity: 1456

Merit: 1014

Quote from: philipma1957 on October 28, 2017, 05:55:26 PM

Quote from: xs.over on October 28, 2017, 05:39:19 PM

Ledipaa, Your calculator is wrong. Two rx on eth in dual with dcr currently gives ~$90/month. While unstable working Vega 56 on monero ~85.

power used for 2 rx on eth with dcr vs power used for 1x 56 mining monero

I see claims with 140 watts for 2000 hash on vega's doing monero

I know 2x rx 470's 480's 570's or 580's will use more then 140 watts

so form factor a good board could do very well with vega 56's

I have this board on order. comes on monday

seems really good to run 4 vega 56's with endless spacing for cooling

but right now I am almost all nvidia mostly because of a few more coin choices

interesting, where did you order that one and for which price? Could only find a chinese Page.

car1999

full member

Activity: 350

Merit: 100

I need a command line tool to get vega GPU temp and fan speed on windows, is there anyone?

blevotron

newbie

Activity: 226

Merit: 0

Well let's hope miner optimization (looking at your claymore Wink ) and either some bios changes or memory tweaks help...

I got 3 orders to go through today. Hopefully they all ship. A couple orders of my orders got cancelled due to the 1 per household limit.

Thankfully ebay prices are currently through the roof. If I get them in hand, I may dump them...

superzebra

newbie

Activity: 10

Merit: 0

In general - so it is not revolution and usless =( Epяe is understood after 1 hour of reading

Permonik

member

Activity: 275

Merit: 11

Hi guys,
Someone try new drivers 17.10.3?
I am also curious if someone prepare new power tables.

car1999

full member

Activity: 350

Merit: 100

Quote from: Mythic on October 29, 2017, 02:01:25 AM

Quote from: aid77 on October 29, 2017, 01:44:50 AM

Hello!

I need a help with power table.

I set 850 mV for P0-P7 and 850 mV for P3 HBM memory.

But in GPU-Z Sensors - VDDC 1 V or more.

Why?

Because lowering voltages past a certain point in the power play table doesn't actually do anything. Use OverdriveNTool to apply the voltages. Also remember that memory voltage is actually core voltage floor, so make sure it's equal to or lower than your desired core voltage.

Mythic, do you mean we can change clock and voltage using OverdriveNTool, registry mod power play table is unnecessary?

car1999

full member

Activity: 350

Merit: 100

Quote from: duketasos on October 29, 2017, 06:50:47 AM

very very interesting mobo, bit worried about the space left in each gpu (how to cool them enough? it's tighter than a topmodel's bra!) also where did you find that @$#@# devcon.exe i downloaded from small diy files to the entire visual studio and still nothing...

I get devcon.exe from https://docs.microsoft.com/en-us/windows-hardware/drivers/devtest/devcon

I've installed visual studio 2017 days ago to build xmr-stak-amd, not Sure if visual studio is required for devcon.exe.

shinjunobi09

member

Activity: 126

Merit: 14

Should have use gaming console parts in your computer like higher video its very compatible to all mining software especially these one to avoid any further delay and lagging. And try using UPS for backup purpose in case there is brown out occurring.

car1999

full member

Activity: 350

Merit: 100

Quote from: kolopro on October 20, 2017, 12:29:23 PM

Quote from: cryptonist on October 20, 2017, 11:12:09 AM

Guys, I'm still dropping to 1500 per card (two vega 64s with 16GB RAM) after 20-24 hours. Am forced to restart everything to get back to 1900 per card. Can anyone share their insights as to what I might be missing? I have the cards running on a rig I remote into, so no displays attached at all (not even to the onboard video). Maybe I need dummy HDMI dongles? Thanks for any help.

I had the same issue with hashrate going to 1700 and had to restart the miner. I noticed that was happening while i was running anything else than the miner that had to do with the gpu ( HWinfo, afterburner). What i did was to lower a bit the oc settings and i was just fine..

I have similer issue, 2 vega56 with stock bios and identical settings(use registry mod, 1350core@850mv, 935mem@850mv), the first card which is pluged into main PCIEx16 slot keeps 1850H/s, but the second card begins at 1850H/s and drops to 1600H/s after a few minutes run.
it isn't due to hige temp, both of the 2 cards are under 53C.
Windows 10 fall update, blockchine driver, xmr-stak-amd.

Bare

member

Activity: 130

Merit: 11

I guess that mobo is designed for blower type cooled graphic cards in mind...

bytiges

full member

Activity: 196

Merit: 100

Quote from: Ledipaa on October 29, 2017, 08:03:33 AM

Quote from: duketasos on October 29, 2017, 06:50:47 AM

very very interesting mobo, bit worried about the space left in each gpu (how to cool them enough? it's tighter than a topmodel's bra!) also where did you find that @$#@# devcon.exe i downloaded from small diy files to the entire visual studio and still nothing...

Obviously thats not for living room use Cheesy

Fans closer 100% and its sure cool, even loud as a jet Cheesy

You need to close it in a box and force fresh air between the cards with fans (rack style).

Ledipaa

newbie

Activity: 62

Merit: 0

Quote from: duketasos on October 29, 2017, 06:50:47 AM

very very interesting mobo, bit worried about the space left in each gpu (how to cool them enough? it's tighter than a topmodel's bra!) also where did you find that @$#@# devcon.exe i downloaded from small diy files to the entire visual studio and still nothing...

Obviously thats not for living room use Cheesy

Fans closer 100% and its sure cool, even loud as a jet Cheesy

espen83

newbie

Activity: 9

Merit: 0

Seems like one has to put the power limit somewhat higher with the new drivers. Used to have it at -24 in wattman, but now i have to run it about -10 in order to get over 40mhs in eth.

duketasos

newbie

Activity: 28

Merit: 0

very very interesting mobo, bit worried about the space left in each gpu (how to cool them enough? it's tighter than a topmodel's bra!) also where did you find that @$#@# devcon.exe i downloaded from small diy files to the entire visual studio and still nothing...

Zakyn

newbie

Activity: 20

Merit: 0

Quote from: philipma1957 on October 28, 2017, 05:55:26 PM

Quote from: xs.over on October 28, 2017, 05:39:19 PM

Ledipaa, Your calculator is wrong. Two rx on eth in dual with dcr currently gives ~$90/month. While unstable working Vega 56 on monero ~85.

power used for 2 rx on eth with dcr vs power used for 1x 56 mining monero

I see claims with 140 watts for 2000 hash on vega's doing monero

I know 2x rx 470's 480's 570's or 580's will use more then 140 watts

so form factor a good board could do very well with vega 56's

I have this board on order. comes on monday

seems really good to run 4 vega 56's with endless spacing for cooling

but right now I am almost all nvidia mostly because of a few more coin choices

https://i.imgur.com/rTThCzf.png

The chinese board is actually quite interesting. If you see the few PCI E slots at the bottom, they are labelled 8 till 12, but the official specifications only list it as having 8 pci slots.

http://www.onda.cn/MotherBoard_Specifications.aspx?id=373

Topic: Any word on amd vega hash rates? - page 88. (Read 202748 times)