Topic: Any word on amd vega hash rates? - page 89. (Read 202748 times)
@MoneroCrusher: It seems that both you and me have downloaded the 32bit exe into a 64bit system. Downloaded the correct one and it's working great (removed the necessity to run as admin as well).
start the batch with admin rights !
I'm having problems with the script. The manual disable/enable works fine.
output of script:
C:\Users\monero\Desktop>devcon.exe disable "PCI\VEN_1002&DEV_687F"
PCI\VEN_1002&DEV_687F&SUBSYS_0B361002&REV_C3\6&2AF6ADFE&0&000000E6: Disable failed
PCI\VEN_1002&DEV_687F&SUBSYS_0B361002&REV_C3\6&2C451A81&0&000000E0: Disable failed
PCI\VEN_1002&DEV_687F&SUBSYS_0B361002&REV_C3\6&21DB5B6B&0&00000008: Disable failed
PCI\VEN_1002&DEV_687F&SUBSYS_0B361002&REV_C3\6&9C9E801&0&000000EB: Disable failed
No matching devices found.
C:\Users\monero\Desktop>timeout /t 5
Obviously it found 4 Cards but was not able to disable it?
I'm on build 1703 and I downloaded devcon.exe the following way:
https[Suspicious link removed]
Thanks for your awesome contribution Mythic
output of script:
C:\Users\monero\Desktop>devcon.exe disable "PCI\VEN_1002&DEV_687F"
PCI\VEN_1002&DEV_687F&SUBSYS_0B361002&REV_C3\6&2AF6ADFE&0&000000E6: Disable failed
PCI\VEN_1002&DEV_687F&SUBSYS_0B361002&REV_C3\6&2C451A81&0&000000E0: Disable failed
PCI\VEN_1002&DEV_687F&SUBSYS_0B361002&REV_C3\6&21DB5B6B&0&00000008: Disable failed
PCI\VEN_1002&DEV_687F&SUBSYS_0B361002&REV_C3\6&9C9E801&0&000000EB: Disable failed
No matching devices found.
C:\Users\monero\Desktop>timeout /t 5
Obviously it found 4 Cards but was not able to disable it?
I'm on build 1703 and I downloaded devcon.exe the following way:
https[Suspicious link removed]
Thanks for your awesome contribution Mythic
having the same issue. Anyone managed to solve this?
Hello!
I need a help with power table.
I set 850 mV for P0-P7 and 850 mV for P3 HBM memory.
But in GPU-Z Sensors - VDDC 1 V or more.
Why?
I need a help with power table.
I set 850 mV for P0-P7 and 850 mV for P3 HBM memory.
But in GPU-Z Sensors - VDDC 1 V or more.
Why?
Because lowering voltages past a certain point in the power play table doesn't actually do anything. Use OverdriveNTool to apply the voltages. Also remember that memory voltage is actually core voltage floor, so make sure it's equal to or lower than your desired core voltage.
Hello!
I need a help with power table.
I set 850 mV for P0-P7 and 850 mV for P3 HBM memory.
But in GPU-Z Sensors - VDDC 1 V or more.
Why?
I need a help with power table.
I set 850 mV for P0-P7 and 850 mV for P3 HBM memory.
But in GPU-Z Sensors - VDDC 1 V or more.
Why?
Ledipaa, Your calculator is wrong. Two rx on eth in dual with dcr currently gives ~$90/month. While unstable working Vega 56 on monero ~85.
I see claims with 140 watts for 2000 hash on vega's doing monero
I
What settings were used?
Code:
"PP_PhmSoftPowerPlayTable"=hex:B6,02,08,01,00,5C,00,E1,06,00,00,EE,2B,00,00,1B,\
00,48,00,00,00,80,A9,03,00,F0,49,02,00,8E,00,08,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,02,01,5C,00,4F,02,46,02,94,00,9E,01,BE,00,28,01,7A,00,8C,00,\
BC,01,00,00,00,00,72,02,00,00,90,00,A8,02,6D,01,43,01,97,01,F0,49,02,00,71,\
02,02,02,00,00,00,00,00,00,08,00,00,00,00,00,00,00,05,00,07,00,03,00,05,00,\
00,00,00,00,00,00,01,08,84,03,84,03,84,03,84,03,84,03,84,03,84,03,89,03,01,\
01,46,05,01,01,84,03,00,08,60,EA,00,00,00,40,19,01,00,01,80,38,01,00,02,DC,\
4A,01,00,03,90,5F,01,00,04,00,77,01,00,05,90,91,01,00,06,【6C,B0,01】,00,07,01,\
08,D0,4C,01,00,00,00,80,00,00,00,00,00,00,1C,83,01,00,01,00,00,00,00,00,00,\
00,00,70,A7,01,00,02,00,00,00,00,00,00,00,00,88,BC,01,00,03,00,00,00,00,00,\
00,00,00,38,C1,01,00,04,00,00,00,00,00,00,00,00,88,D5,01,00,05,00,00,00,00,\
01,00,00,00,70,D9,01,00,06,00,00,00,00,01,00,00,00,00,26,02,00,07,00,00,00,\
00,01,00,00,00,00,05,60,EA,00,00,00,40,19,01,00,00,80,38,01,00,00,DC,4A,01,\
00,00,90,5F,01,00,00,00,08,28,6E,00,00,00,2C,C9,00,00,01,F8,0B,01,00,02,80,\
38,01,00,03,90,5F,01,00,04,F4,91,01,00,05,D0,B0,01,00,06,C0,D4,01,00,07,00,\
08,6C,39,00,00,00,24,5E,00,00,01,FC,85,00,00,02,AC,BC,00,00,03,34,D0,00,00,\
04,68,6E,01,00,05,08,97,01,00,06,EC,A3,01,00,07,00,01,68,3C,01,00,00,01,04,\
3C,41,00,00,00,00,00,50,C3,00,00,00,00,00,80,38,01,00,02,00,00,B0,AD,01,00,\
04,00,00,01,08,00,98,85,00,00,40,B5,00,00,60,EA,00,00,50,C3,00,00,01,80,BB,\
00,00,60,EA,00,00,94,0B,01,00,50,C3,00,00,02,00,E1,00,00,94,0B,01,00,40,19,\
01,00,50,C3,00,00,03,78,FF,00,00,40,19,01,00,88,26,01,00,50,C3,00,00,04,40,\
19,01,00,80,38,01,00,80,38,01,00,50,C3,00,00,05,80,38,01,00,DC,4A,01,00,DC,\
4A,01,00,50,C3,00,00,06,00,77,01,00,00,77,01,00,90,5F,01,00,50,C3,00,00,07,\
90,91,01,00,90,91,01,00,00,77,01,00,50,C3,00,00,01,18,00,00,00,00,00,00,00,\
0B,E4,12,60,09,60,09,4B,00,0A,00,54,03,90,01,90,01,90,01,90,01,90,01,90,01,\
90,01,00,00,00,00,00,02,04,31,07,DC,00,DC,00,DC,00,90,01,00,00,59,00,69,00,\
4A,00,4A,00,5F,00,73,00,73,00,64,00,40,00,90,92,97,60,96,00,90,55,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,02,02,D4,30,00,00,02,10,60,EA,00,\
00,02,10
Quote
This is correct by you don't want to disable the iGPU on rigs that use it (like mine).
You can instead call
This is enable/disable ALL devices that match the prefix.
Just my 2p
You can instead call
Code:
devcon.exe disable "PCI\VEN_1002&DEV_687F"
timeout /t 2
devcon.exe enable "PCI\VEN_1002&DEV_687F"
Just my 2p
I think this also works:
Code:
devcon.exe restart "*PCI\VEN_1002&DEV_687F*"
Ledipaa, Your calculator is wrong. Two rx on eth in dual with dcr currently gives ~$90/month. While unstable working Vega 56 on monero ~85.
power used for 2 rx on eth with dcr vs power used for 1x 56 mining monero
I see claims with 140 watts for 2000 hash on vega's doing monero
I know 2x rx 470's 480's 570's or 580's will use more then 140 watts
so form factor a good board could do very well with vega 56's
I have this board on order. comes on monday
seems really good to run 4 vega 56's with endless spacing for cooling
but right now I am almost all nvidia mostly because of a few more coin choices
Ledipaa, Your calculator is wrong. Two rx on eth in dual with dcr currently gives ~$90/month. While unstable working Vega 56 on monero ~85.
Don't forget that vega's doing 44 mh/s eth @ 150W, what other cards can do this?
On another note... Did anyone tried Myriad-Groestl? How is Vega performing on that algo?
P.S.: Too many hashing powers on all altcoins that cause low profit with 1+ year ROI
Monero is still way more profitable. Those 2 polaris cards would need to be able to mine at 74m/s (combined) to match 1 vega on monero. But if you say vega on monero is not a good deal, why would anyone even mine anything
how to improve SoC Clock with Block chain driver?
where are value to change?
stock 6C,B0,01 = 110700where are value to change?
i got it. thank you.
Q: If I wanted to donate some pizza money to the broke ass college student that typed this up, how would I do so?
A: You ask the best questions! I doubt I'll get anything before more well known people/websites copy everything I just said (with no credit, obviously), but here are some addresses just in case.
XMR: 42e8AWjcirkBDzCNnSjPxeGJeht71kFfWcoxxCWsxe8HZqP29NruDsxcvVSjbKw17AUDepopK7ZYCUn mRvcGS9kBT5XWhMQ
ETH: 0x74Ed2CA095Dd3aE98D88d5ca1dDb77E752152938
Want to send 0.5XMR but it seem wrong address
how to improve SoC Clock with Block chain driver?
where are value to change?
stock 6C,B0,01 = 110700 where are value to change?
how to improve SoC Clock with Block chain driver?
where are value to change?
where are value to change?
From pm discussions 4 vega 56's can be had for about 1700-1800 usd put in with a ryzen 1700 and a proper mobo.
Build is about 2200. it will do 8000-8500 for cryptonight/monero under 700 watts. so roi is under a year.
how good is that? I am not sure. What I don't like is if xmr tanks the card does not have a lot of value.
The price is coming down to the MSRP, which means that Vega cards should hold their value better going forward. I was really hoping for an ebay bucks promo this week with those Newegg Sapphire 56's at $419, but didn't happen, not for me at least. They're selling quite a bit at that price - I'm a little worried they'll raise it before another promo comes in. Either way, I see it as a good buy right now - XMR is pretty undervalued imo, and would only really tank along with a more widespread alt crash. And it's showing promise with other algos - I think this card has a lot of potential once miner developers have had more time to work with it.
I can get 4x 56's for under 1700. I have a few mobos empty.
I can move my 1080i's from my ryzen 1800 board and put 4x amd 56's mine all xmr.
Not sure if I will but I may do this.
I right clicked the batch file and run it as admin, yes.
Anything else I couldve missed?
Try running from an elevated cmd prompt. Your error looks like you're not running as admin ... really.Anything else I couldve missed?
Also try the commands by hand from the same elevated prompt.
Other than that I can only think that your devcon is not compatible (use a recent one for windows 10).
Don't forget that vega's doing 44 mh/s eth @ 150W, what other cards can do this?
On another note... Did anyone tried Myriad-Groestl? How is Vega performing on that algo?
P.S.: Too many hashing powers on all altcoins that cause low profit with 1+ year ROI
From pm discussions 4 vega 56's can be had for about 1700-1800 usd put in with a ryzen 1700 and a proper mobo.
Build is about 2200. it will do 8000-8500 for cryptonight/monero under 700 watts. so roi is under a year.
how good is that? I am not sure. What I don't like is if xmr tanks the card does not have a lot of value.
The price is coming down to the MSRP, which means that Vega cards should hold their value better going forward. I was really hoping for an ebay bucks promo this week with those Newegg Sapphire 56's at $419, but didn't happen, not for me at least. They're selling quite a bit at that price - I'm a little worried they'll raise it before another promo comes in. Either way, I see it as a good buy right now - XMR is pretty undervalued imo, and would only really tank along with a more widespread alt crash. And it's showing promise with other algos - I think this card has a lot of potential once miner developers have had more time to work with it.
Jump to: