ASICMINER Auction: 50 Block Erupter Blades CHECK OP FOR PAYMENT - page 15.

michelet

full member

Activity: 170

Merit: 100

www.easyha.sh

Quote from: dogie on May 03, 2013, 06:45:09 PM

Mine is on a plane from HK to Europe as we speak, but won't be in my hands until Tuesday?! Sad

[I called to ask]

All the cabling and wiring ready, I can be up and running in 2 minutes once I have my blades.

Same to me, they say it will arrive Tuesday. I am in Europe too.

drlatino999

sr. member

Activity: 335

Merit: 250

Quote from: drlatino999 on May 03, 2013, 10:22:27 PM

Mine will be hear monday afternoon, called DHL Customer Service and got my shipping information corrected.

Damn it, now the world will see I can't choose the correct here/hear.

drlatino999

sr. member

Activity: 335

Merit: 250

Mine will be hear monday afternoon, called DHL Customer Service and got my shipping information corrected.

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: Caesium on May 03, 2013, 06:56:48 PM

Yeah, they'll land in Germany or something first I guess, move to the UK over the weekend with some luck, but then Bank Holiday on Monday, so Tuesday is the earliest we can hope for.

What number did you call for info, I'll check too

http://www.dhl.co.uk/en/contact_centre/contact_express.html

bclcjunkie

hero member

Activity: 833

Merit: 1001

Thanks! Appreciate the answer!

Quote from: lan787 on May 03, 2013, 12:59:58 PM

Quote from: bclcjunkie on May 03, 2013, 11:03:08 AM

hey guys,

can anyone point me in the right direction in terms of electrically wiring this board?

https://docs.google.com/document/d/1VMO3VfIBy3KIwUaaQ8XhKrSVEbXeeMEqsVhhk6Bz9io/edit?pli=1

so the doc says this:

1. The two poles for the positive polarity are identical when cabling from the PSU, so are those for the negative polarity.

i'll be getting myself a psu with 12v/10a output so when i bare the wires, how will i know which wire goes into which hole? the picture below belongs to LainZ and i'm trying to figure out how to wire the board when it arrives...

look at another side of the blade. You will see "+ + - -" marks. So + goes to + and - to -.

Noitev

hero member

Activity: 812

Merit: 505

The Last NXT Founder

Quote from: radiumsoup on May 03, 2013, 07:40:07 PM

Quote from: Noitev on May 03, 2013, 07:18:49 PM

For some awesome reason, I'm getting mine on monday. Strange considering I'm literally as far away from china as you can be...

Argentina? (The Moon?)

I'd answer, but the light won't reach you until tomorrow.

radiumsoup

sr. member

Activity: 356

Merit: 255

Quote from: Noitev on May 03, 2013, 07:18:49 PM

For some awesome reason, I'm getting mine on monday. Strange considering I'm literally as far away from china as you can be...

Argentina? (The Moon?)

Noitev

hero member

Activity: 812

Merit: 505

The Last NXT Founder

Quote from: dogie on May 03, 2013, 06:45:09 PM

Mine is on a plane from HK to Europe as we speak, but won't be in my hands until Tuesday?! Sad

[I called to ask]

All the cabling and wiring ready, I can be up and running in 2 minutes once I have my blades.

For some awesome reason, I'm getting mine on monday. Strange considering I'm literally as far away from china as you can be...

Caesium

hero member

Activity: 546

Merit: 500

Yeah, they'll land in Germany or something first I guess, move to the UK over the weekend with some luck, but then Bank Holiday on Monday, so Tuesday is the earliest we can hope for.

What number did you call for info, I'll check too

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Mine is on a plane from HK to Europe as we speak, but won't be in my hands until Tuesday?! Sad

[I called to ask]

All the cabling and wiring ready, I can be up and running in 2 minutes once I have my blades.

desired_username

hero member

Activity: 886

Merit: 1013

Quote from: lightbox on May 02, 2013, 03:55:08 PM

Quote from: desired_username on April 30, 2013, 11:35:11 AM

I think it would be benefical if we don't pursue this matter further. It's just pointless noise.

Can anyone please confirm the dimensions of the block erupters?

Did you find out the dimensions? i too would like to know before they arrive

Thanks!

That's what I found:

Hasher size: 233mm x 116mm with a 227mm x 100mm x 19mm heat sink attached to its back
  Power module size: 192mm x 89mm
  Ethernet controller size: 86mm x 40mm

teek

hero member

Activity: 667

Merit: 500

Quote from: teek on May 03, 2013, 03:25:48 PM

Quote from: Pinwheel on May 03, 2013, 01:47:43 PM

Quote from: teek on May 03, 2013, 10:41:58 AM

anyone elses shipment "on hold" ? also i signed up for e-mail notification and did not receive a more detailed e-mail as some are saying..

were is your shipment on hold? You got 10 blades, right. Is it been shipped in single box?

e-mail notifications - waste of time, it will not provide more detailed info then you can see on web site.

yeah friedcat confirmed there is some customs issue and he is dealing with it.. hope it gets moving asap!

actually i just checked again, he must have got it sorted out because it appears to be on the move now

candoo

hero member

Activity: 602

Merit: 500

Vertrau in Gott

My DHL Tracking:

Quote

Thu, 02.05.2013 22:56 h
--
Processed at
Thu, 02.05.2013 23:39 h
--
Departed Facility in
Fri, 03.05.2013 10:37 h
SHENZHEN, China
Departed Facility in SHENZHEN
Fri, 03.05.2013 12:27 h
HONG KONG, Hong Kong
Arrived at sort facility in HONG KONG
Fri, 03.05.2013 12:43 h
HONG KONG, Hong Kong
Processed at HONG KONG
Fri, 03.05.2013 12:43 h
HONG KONG, Hong Kong
Clearance Processing complete at HONG KONG

teek

hero member

Activity: 667

Merit: 500

Quote from: Pinwheel on May 03, 2013, 01:47:43 PM

Quote from: teek on May 03, 2013, 10:41:58 AM

anyone elses shipment "on hold" ? also i signed up for e-mail notification and did not receive a more detailed e-mail as some are saying..

were is your shipment on hold? You got 10 blades, right. Is it been shipped in single box?

e-mail notifications - waste of time, it will not provide more detailed info then you can see on web site.

yeah friedcat confirmed there is some customs issue and he is dealing with it.. hope it gets moving asap!

Omen1855

member

Activity: 111

Merit: 10

Bitcoin Entrepreneur

Mine is also still in Hong Kong. I called DHL for upgrading to weekend shipping, but seems to be impossible to arrange as the receiver. I tried to bribe, beg, plead, threaten and sob

I'll just need to be a bit more patient I guess.

Man I really hope I don't screw up anything with the PSU. That'll be a thrill.

Pinwheel

sr. member

Activity: 378

Merit: 250

Quote from: teek on May 03, 2013, 10:41:58 AM

anyone elses shipment "on hold" ? also i signed up for e-mail notification and did not receive a more detailed e-mail as some are saying..

were is your shipment on hold? You got 10 blades, right. Is it been shipped in single box?

e-mail notifications - waste of time, it will not provide more detailed info then you can see on web site.

Pinwheel

sr. member

Activity: 378

Merit: 250

One advise, do not test right now your blade on btcguild, they are not giving any work to newly registered asic miners at the moment. So, you may get confused, when you will connect your blade and then it will be zero zero everywhere. one pool which is relatively Ok at the moment bitcoin.cz. If you want to see more or less correct hash rate you can go to mmpool.bitparking.com/pool

lan787

member

Activity: 106

Merit: 10

I think I am missing something important here.

https://docs.google.com/document/d/1VMO3VfIBy3KIwUaaQ8XhKrSVEbXeeMEqsVhhk6Bz9io/edit?usp=sharing&pli=1#

That link is all we have about configuring the blade?

I mean I figured that the blade has ip 192.168.1.254 and web interface at port 8000. But for that I had to run tcpdump and nmap. That is too hardcore.
And how am I supposed to know that I need 12V current?
It took me half an hour to figure that the blade starts only if the red "thing" is inserted into blade.

lan787

member

Activity: 106

Merit: 10

Quote from: bclcjunkie on May 03, 2013, 11:03:08 AM

hey guys,

can anyone point me in the right direction in terms of electrically wiring this board?

https://docs.google.com/document/d/1VMO3VfIBy3KIwUaaQ8XhKrSVEbXeeMEqsVhhk6Bz9io/edit?pli=1

so the doc says this:

1. The two poles for the positive polarity are identical when cabling from the PSU, so are those for the negative polarity.

i'll be getting myself a psu with 12v/10a output so when i bare the wires, how will i know which wire goes into which hole? the picture below belongs to LainZ and i'm trying to figure out how to wire the board when it arrives...

look at another side of the blade. You will see "+ + - -" marks. So + goes to + and - to -.

Caesium

hero member

Activity: 546

Merit: 500

damn, no movement after hong kong yet for me Sad

I can only hope its on a plane heading into Europe Cheesy

Topic: ASICMINER Auction: 50 Block Erupter Blades CHECK OP FOR PAYMENT - page 15. (Read 138630 times)