ASICMINER Fixed-Price Auction: 50 Block Erupter Blades -everyone won, SEE OP-

muyuu

donator

Activity: 980

Merit: 1000

Quote from: lunokhod on October 31, 2013, 12:57:20 AM

Quote from: ssateneth on October 30, 2013, 06:21:34 AM

Quote from: lunokhod on October 29, 2013, 10:45:33 PM

I've been looking through the threads about the Block Erupter Blade ASIC boards and can't seem to find a definite answer.

Do they require fans on both sides of the ASIC board, are there ASICs on both sides? Is there a heatsink on both sides?

Lunokhod

Jesus, whats with all the thread necros lately?

ASICs are located on one side of the board, heatsink is on the other side. May seem weird, but because of how the chip is packaged, it will dissipate more heat through the PCB and vias than through the plastic coating on the chip. Active cooling is mandatory, but only heatsink side.

Thanks for the info. I thought that putting this question on the end of a related thread would have been OK. My bad! Next time I will consider start a new one.

Guide here
https://bitcointalksearch.org/topic/guide-dogies-comprehensive-asicminer-blade-setup-205369

lunokhod

newbie

Activity: 13

Merit: 0

Quote from: ssateneth on October 30, 2013, 06:21:34 AM

Quote from: lunokhod on October 29, 2013, 10:45:33 PM

I've been looking through the threads about the Block Erupter Blade ASIC boards and can't seem to find a definite answer.

Do they require fans on both sides of the ASIC board, are there ASICs on both sides? Is there a heatsink on both sides?

Lunokhod

Jesus, whats with all the thread necros lately?

ASICs are located on one side of the board, heatsink is on the other side. May seem weird, but because of how the chip is packaged, it will dissipate more heat through the PCB and vias than through the plastic coating on the chip. Active cooling is mandatory, but only heatsink side.

Thanks for the info. I thought that putting this question on the end of a related thread would have been OK. My bad! Next time I will consider start a new one.

ssateneth

legendary

Activity: 1344

Merit: 1004

Quote from: lunokhod on October 29, 2013, 10:45:33 PM

I've been looking through the threads about the Block Erupter Blade ASIC boards and can't seem to find a definite answer.

Do they require fans on both sides of the ASIC board, are there ASICs on both sides? Is there a heatsink on both sides?

Lunokhod

Jesus, whats with all the thread necros lately?

ASICs are located on one side of the board, heatsink is on the other side. May seem weird, but because of how the chip is packaged, it will dissipate more heat through the PCB and vias than through the plastic coating on the chip. Active cooling is mandatory, but only heatsink side.

lunokhod

newbie

Activity: 13

Merit: 0

I've been looking through the threads about the Block Erupter Blade ASIC boards and can't seem to find a definite answer.

Do they require fans on both sides of the ASIC board, are there ASICs on both sides? Is there a heatsink on both sides?

Lunokhod

bitjoint

sr. member

Activity: 333

Merit: 250

Commander of the Hodl Legions

Hey guys, I'm selling my blade here in this auction https://bitcointalksearch.org/topic/auction-13ghs-asicminer-block-erupter-blade-starts-41btc-236520

Let me know if you are interested...

SwissMiner

sr. member

Activity: 294

Merit: 250

51.99 BTC plus shipping Huh

All my blades are coming from here within two days by DHL:

http://www.cardreaderfactory.com/shop/asicminer-block-erupter-blade.html

finlof

hero member

Activity: 630

Merit: 500

Quote from: mc_lovin on June 01, 2013, 08:10:10 PM

We have the blades in stock at WTCR.ca!

USBs are coming in the next couple of days. Order away!

how many do you have in-stock? what's the delivery time to NY?

wpgdeez

hero member

Activity: 728

Merit: 500

Quote from: mc_lovin on June 01, 2013, 08:10:10 PM

We have the blades in stock at WTCR.ca!

USBs are coming in the next couple of days. Order away!

Just bought 2 in person

Thanks for the help guys, can't wait to get these running tonight!

mc_lovin

legendary

Activity: 1190

Merit: 1000

www.bitcointrading.com

We have the blades in stock at WTCR.ca!

USBs are coming in the next couple of days. Order away!

klrgoten

newbie

Activity: 46

Merit: 0

any more blades being sold?

candoo

hero member

Activity: 602

Merit: 500

Vertrau in Gott

Quote from: Lucky - Luciano on May 31, 2013, 08:06:27 AM

Quote from: Lucky - Luciano on May 30, 2013, 01:44:56 PM

Quote from: tadakaluri on May 28, 2013, 06:31:45 AM

I would like to get one.

https://bitcointalksearch.org/topic/guide-dogies-comprehensive-asicminer-blade-setup-205369

Damn, I did not write this post! Someone hacked account! Is there another explanation?

Guess you were drunk last night?

Lucky - Luciano

hero member

Activity: 711

Merit: 500

Quote from: Lucky - Luciano on May 30, 2013, 01:44:56 PM

Quote from: tadakaluri on May 28, 2013, 06:31:45 AM

I would like to get one.

https://bitcointalksearch.org/topic/guide-dogies-comprehensive-asicminer-blade-setup-205369

Damn, I did not write this post! Someone hacked account! Is there another explanation?

Lucky - Luciano

hero member

Activity: 711

Merit: 500

Quote from: tadakaluri on May 28, 2013, 06:31:45 AM

I would like to get one.

https://bitcointalksearch.org/topic/guide-dogies-comprehensive-asicminer-blade-setup-205369

tadakaluri

hero member

Activity: 616

Merit: 500

I would like to get one.

rammy2k2

legendary

Activity: 1974

Merit: 1003

i said chip boards and worked with no problems

WinTame2012

sr. member

Activity: 315

Merit: 250

Official sponsor of Microsoft Corp.

Quote from: Pinwheel on May 27, 2013, 02:49:24 PM

what price to declare is tricky question. what is OK for one country can be overpay for another, and they cant declare to Chines custom different value for same kind of goods each time they ship. I think it is not a price what trigger custom attention, but description of good "BE PCB board" maybe it suits friedcat for passing Chinese custom, but may sound puzzling for Wester customs. If description of goods will be for example as "Computer parts/components" that may help to pass custom with better success

I'd vote for 'computer parts', it worked for me many times.

Pinwheel

sr. member

Activity: 378

Merit: 250

what price to declare is tricky question. what is OK for one country can be overpay for another, and they cant declare to Chines custom different value for same kind of goods each time they ship. I think it is not a price what trigger custom attention, but description of good "BE PCB board" maybe it suits friedcat for passing Chinese custom, but may sound puzzling for Wester customs. If description of goods will be for example as "Computer parts/components" that may help to pass custom with better success

cchan

sr. member

Activity: 379

Merit: 250

Quote from: cchan on May 23, 2013, 05:10:09 AM

My blade restarted after 3 days' continous mining.
I'm not sure if there are any problems with it. Hope it is ok.

restart after 1 day mining in BTC Guild. last time it was mining in slush pool.

cimpex

sr. member

Activity: 588

Merit: 252

don't use too low values - customs won't believe that will ask for a payment statement.
if they want a statement for the payment and you have paid in bitcoins only...wish you good luck explaining them your bitcoin payment. as statement not only paypal statements could be used. they just want a statement for a money transfer in FIAT (paypal, skrill, bank account,...).

prophetx

legendary

Activity: 1666

Merit: 1010

he who has the gold makes the rules

Quote from: Lucky - Luciano on May 25, 2013, 05:52:47 AM

Quote from: Jazeon on May 25, 2013, 05:02:11 AM

Maybe the solution is the price of 1 USD + 49 BTC?
We have proof of payment for 1 USD and customs are happy

Good idea. I would suggest 49.5 BTC + $ 39.

lol then they charge you 20% vat on that... no...

try looking up sample invoices online, fill it out with $39 and the details of the company in china or whatever and send it to them

Topic: ASICMINER Fixed-Price Auction: 50 Block Erupter Blades -everyone won, SEE OP- (Read 59642 times)