ASICPuppy.net - Terminus, Moonlander 2, 2pacs in Stock! BTC,LTC,ETH,BCH - page 28.

fractalbc

full member

Activity: 192

Merit: 100

Quote from: CrazyGuy on June 18, 2014, 08:08:57 PM

I recommend switching back to the custom 4.3.3 build of cgminer if you are having issues with cgminer 4.4.0 or bfgminer 4.2.0. Both official builds are having reported issues reliably detecting the RBOX.

+1 to this!

Can you put it in the OP? It would save people a lot of grief.

It is a bit of a hassle to run multiple miners if you have multiple different devices, but bfgminer is not stable with these boxes.

BTCJoe

newbie

Activity: 38

Merit: 0

CG,

Dropped you a PM about those 10 if you have them I'll take them

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Quote from: CrazyGuy on June 18, 2014, 08:47:15 PM

Quote from: mstrongbow on June 18, 2014, 08:41:56 PM

Quote from: CrazyGuy on June 18, 2014, 08:08:57 PM

Price updated. Free ATX breakout board with each 10 units purchased through Sunday.

I recommend switching back to the custom 4.3.3 build of cgminer if you are having issues with cgminer 4.4.0 or bfgminer 4.2.0. Both official builds are having reported issues reliably detecting the RBOX.

Also, if you are using the ATX breakout board, you'll note that the 8 pin PCIE connectors are actually 8 pin CPU connectors. You will be able to connect 6 of 8 pins, and that's all you need. I have ten running on one breakout board with no issues. Do not try plugging a cpu connector into the pcie connectors, as the polarity is reversed and may damage the board.

The breakout boards have BOTH 8pin CPU and 8pin PCIE headers...
The 8pin CPU connector (header) is the white colored, VERTICAL connector directly next to the 20+4pin ATX connector (header).
The black, horizontal 8pin connectors (headers) are the PCIE connectors and will accept 6pin OR 8pin without issues.
DO NOT PLUG MORE THAN 1 PSU INTO THESE BOARDS! Bad things happen.

I currently have my breakout boards supplying power using just the 20+4pin ATX and the 8 pin CPU headers. I am powering 7x R-Box units between 2 breakout boards (5 on one, 2 on the other). The breakout boards also serve as a power switch for the PSU supplying power, in my case, the PSU is also supplying power to part of my S1 farm.

Perhaps they just messed up on my board and another customer's. I have 1 8 pin CPU header(white) and 2 8pin CPU headers(black) that are labled as pciex. I know they are CPU headers because the extra two ground connectors to the left of the 6 pin do not fit, but a CPU molex does. It doesn't really matter much either way, as I am only using 2x6 pins and they work just fine with my 10 RBOX units. The 12v from ATX, CPU, and 2 6 pin PCIE connectors is more than enough for 10 units.

I will double check and inspect the black colored headers on my 2 boards...I have seen GPU's with the 8pin CPU headers on them before...mixup at the factory perhaps? (they received wrong headers but no-one noticed?)

Thanks for the heads up and I will let ya know what I find out. (I plan on using non-powered adapters to test the fitment of the 2x 8pin "PCIE" headers on my 2 boards...I wouldn't want to screw something up trying to plug in a live adapter. heh

CrazyGuy

legendary

Activity: 1973

Merit: 1007

Quote from: mstrongbow on June 18, 2014, 08:41:56 PM

Quote from: CrazyGuy on June 18, 2014, 08:08:57 PM

Price updated. Free ATX breakout board with each 10 units purchased through Sunday.

I recommend switching back to the custom 4.3.3 build of cgminer if you are having issues with cgminer 4.4.0 or bfgminer 4.2.0. Both official builds are having reported issues reliably detecting the RBOX.

Also, if you are using the ATX breakout board, you'll note that the 8 pin PCIE connectors are actually 8 pin CPU connectors. You will be able to connect 6 of 8 pins, and that's all you need. I have ten running on one breakout board with no issues. Do not try plugging a cpu connector into the pcie connectors, as the polarity is reversed and may damage the board.

The breakout boards have BOTH 8pin CPU and 8pin PCIE headers...
The 8pin CPU connector (header) is the white colored, VERTICAL connector directly next to the 20+4pin ATX connector (header).
The black, horizontal 8pin connectors (headers) are the PCIE connectors and will accept 6pin OR 8pin without issues.
DO NOT PLUG MORE THAN 1 PSU INTO THESE BOARDS! Bad things happen.

I currently have my breakout boards supplying power using just the 20+4pin ATX and the 8 pin CPU headers. I am powering 7x R-Box units between 2 breakout boards (5 on one, 2 on the other). The breakout boards also serve as a power switch for the PSU supplying power, in my case, the PSU is also supplying power to part of my S1 farm.

Perhaps they just messed up on my board and another customer's. I have 1 8 pin CPU header(white) and 2 8pin CPU headers(black) that are labled as pciex. I know they are CPU headers because the extra two ground connectors to the left of the 6 pin do not fit, but a CPU molex does. It doesn't really matter much either way, as I am only using 2x6 pins and they work just fine with my 10 RBOX units. The 12v from ATX, CPU, and 2 6 pin PCIE connectors is more than enough for 10 units.

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Quote from: CrazyGuy on June 18, 2014, 08:08:57 PM

Price updated. Free ATX breakout board with each 10 units purchased through Sunday.

I recommend switching back to the custom 4.3.3 build of cgminer if you are having issues with cgminer 4.4.0 or bfgminer 4.2.0. Both official builds are having reported issues reliably detecting the RBOX.

Also, if you are using the ATX breakout board, you'll note that the 8 pin PCIE connectors are actually 8 pin CPU connectors. You will be able to connect 6 of 8 pins, and that's all you need. I have ten running on one breakout board with no issues. Do not try plugging a cpu connector into the pcie connectors, as the polarity is reversed and may damage the board.

The breakout boards have BOTH 8pin CPU and 8pin PCIE headers...
The 8pin CPU connector (header) is the white colored, VERTICAL connector directly next to the 20+4pin ATX connector (header).
The black, horizontal 8pin connectors (headers) are the PCIE connectors and will accept 6pin OR 8pin without issues.
DO NOT PLUG MORE THAN 1 PSU INTO THESE BOARDS! Bad things happen.

I currently have my breakout boards supplying power using just the 20+4pin ATX and the 8pin CPU headers. I am powering 7x R-Box units between 2 breakout boards (5 on one, 2 on the other). The breakout boards also serve as a power switch for the PSU supplying power, in my case, the PSU is also supplying power to part of my S1 farm.

CrazyGuy

legendary

Activity: 1973

Merit: 1007

Price updated. Free ATX breakout board with each 10 units purchased through Sunday.

I recommend switching back to the custom 4.3.3 build of cgminer if you are having issues with cgminer 4.4.0 or bfgminer 4.2.0. Both official builds are having reported issues reliably detecting the RBOX.

Also, if you are using the ATX breakout board, you'll note that the 8 pin PCIE connectors are actually 8 pin CPU connectors. You will be able to connect 6 of 8 pins, and that's all you need. I have ten running on one breakout board with no issues. Do not try plugging a cpu connector into the pcie connectors, as the polarity is reversed and may damage the board.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: mstrongbow on June 16, 2014, 01:01:45 PM

Quote from: CrazyGuy on June 16, 2014, 12:53:41 PM

Quote from: philipma1957 on June 16, 2014, 07:22:18 AM

Crazy the breakout board comes today.

I Will post some tests of it. I have a question did you get any of the printed cases for it yet. I think mStrongbow built the cases?

No, I haven't yet but I need to pick up a few, they are really nice. He's also making an RBOX mounting plate. I would definitely recommend anyone interested in either contact mstrongbow directly for purchase.

PM your shipping address mate...I have a little something to send you for testing/reviewing. Wink

I sent a pm with info you need to ship it. thanks

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Quote from: CrazyGuy on June 16, 2014, 12:53:41 PM

Quote from: philipma1957 on June 16, 2014, 07:22:18 AM

Crazy the breakout board comes today.

I Will post some tests of it. I have a question did you get any of the printed cases for it yet. I think mStrongbow built the cases?

No, I haven't yet but I need to pick up a few, they are really nice. He's also making an RBOX mounting plate. I would definitely recommend anyone interested in either contact mstrongbow directly for purchase.

PM your shipping address mate...I have a little something to send you for testing/reviewing. Wink

CrazyGuy

legendary

Activity: 1973

Merit: 1007

Quote from: philipma1957 on June 16, 2014, 07:22:18 AM

Crazy the breakout board comes today.

I Will post some tests of it. I have a question did you get any of the printed cases for it yet. I think mStrongbow built the cases?

No, I haven't yet but I need to pick up a few, they are really nice. He's also making an RBOX mounting plate. I would definitely recommend anyone interested in either contact mstrongbow directly for purchase.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Crazy the breakout board comes today.

I Will post some tests of it. I have a question did you get any of the printed cases for it yet. I think mStrongbow built the cases?

CrazyGuy

legendary

Activity: 1973

Merit: 1007

Cgminer 4.4.0 released with official support for RBOX.
https://bitcointalksearch.org/topic/m.7336366

Free ATX board with 6+ promo ends tonight.

xzempt

hero member

Activity: 504

Merit: 500

Quote from: ManeBjorn on June 13, 2014, 09:39:40 PM

LOL Dude you are killing me. My wife thinks I am insane but that is one of the funniest images of the day.
I am literally putting the finishing touches on the review. I should use that image for comparison.

Quote from: CrazyGuy on June 13, 2014, 09:21:08 PM

Free ATX Breakout board for every 6 orders continued through the weekend. This deal is cumilative, so if you've ordered an RBOX from me in the past, you don't have to order 6 more for a breakout board. Breakout boards are also available for individual sale @$21.99

I understand there is some interest in Gen 1 Cube conversion kits… I'm happy to announce the first kit is now available for purchase!

ASICPuppy.net

Lol... funny.... Would be nice to see cubes with the new gen chips for real

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Still in processing. I will check it on sunday morning .

Zeta0S

legendary

Activity: 1890

Merit: 1031

How to Install The Rockminer video: http://youtu.be/uxeVj4lQsQM
( Website www.bitcoinupdate.nl )

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

I got my cables from cablez. They work nicely cablez made up 2 sets for me. They fit well and he shrink wrapped them in yellow to allow for easy difference with his grid seed cables.

These are 16 gauge and 3 per pcie cable.

so if you run only 3 r-boxes they are a good choice.

My break out board comes on monday. I will post the cables in a few. the break out board next week.

here is one of the two pcie cables note yellow shrink wrap to stop confusion with these and my gridseed cables

here is a shot of the same type for gridseed. note the black shrink wrap

CrazyGuy

legendary

Activity: 1973

Merit: 1007

All orders have been shipped for the weekend. Any new orders will be shipped Monday. ATX breakout board promotion runs through Sunday night.

Chris_Sabian

legendary

Activity: 896

Merit: 1001

Quote from: CrazyGuy on June 14, 2014, 10:45:17 AM

Quote from: philipma1957 on June 14, 2014, 09:56:44 AM

Quote from: CrazyGuy on June 14, 2014, 09:26:27 AM

Thanks for posting the guides, I need to brush up on my German.

All orders placed before 10 AM CST will be shipped today.

Any info on the rx box other then june 25th as an arrival /shipping date?

It's my understanding that the RXBox will not be shipping June 25th, but at a later date. The Rocket-Box is still scheduled to ship June 25th.

Ahhh.. So many new miners with similar names makes life a little confusing at time... Roll Eyes

CrazyGuy

legendary

Activity: 1973

Merit: 1007

Quote from: philipma1957 on June 14, 2014, 09:56:44 AM

Quote from: CrazyGuy on June 14, 2014, 09:26:27 AM

Thanks for posting the guides, I need to brush up on my German.

All orders placed before 10 AM CST will be shipped today.

Any info on the rx box other then june 25th as an arrival /shipping date?

It's my understanding that the RXBox will not be shipping June 25th, but at a later date. The Rocket-Box is still scheduled to ship June 25th.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: CrazyGuy on June 14, 2014, 09:26:27 AM

Thanks for posting the guides, I need to brush up on my German.

All orders placed before 10 AM CST will be shipped today.

Any info on the rx box other then june 25th as an arrival /shipping date?

CrazyGuy

legendary

Activity: 1973

Merit: 1007

Thanks for posting the guides, I need to brush up on my German.

All orders placed before 10 AM CST will be shipped today.

Topic: ASICPuppy.net - Terminus, Moonlander 2, 2pacs in Stock! BTC,LTC,ETH,BCH - page 28. (Read 105480 times)