Topic: Avalon ASIC users thread - page 16. (Read 438516 times)
ok
it's a p2pool node, there is other hardware hashing on it already
ok what are you trying to mine?
And if you are solo mining then you know that the new Version of CGminer that that uses gets your hashrate off the Shares accepted by the pool
and you only get accepted shares from blocks you find when solo mining
And if you are solo mining then you know that the new Version of CGminer that that uses gets your hashrate off the Shares accepted by the pool
and you only get accepted shares from blocks you find when solo mining
it's kinda frustrating, and i can find zero info as to the cause 
root@OpenWrt:~# cgminer -S /dev/ttyUSB0 --avalon2-voltage 10000 --avalon2-freq 1
500 --avalon2-fan 90
[2014-05-01 20:47:51]
Summary of runtime statistics:
[2014-05-01 20:47:51] Started at [2014-05-01 20:47:50]
[2014-05-01 20:47:51] Pool: http://192.168.100.75:9332
[2014-05-01 20:47:51] Runtime: 0 hrs : 0 mins : 0 secs
[2014-05-01 20:47:51] Average hashrate: 0.0 Mhash/s
[2014-05-01 20:47:51] Solved blocks: 0
[2014-05-01 20:47:51] Best share difficulty: 0
[2014-05-01 20:47:51] Share submissions: 0
[2014-05-01 20:47:51] Accepted shares: 0
[2014-05-01 20:47:51] Rejected shares: 0
[2014-05-01 20:47:51] Accepted difficulty shares: 0
[2014-05-01 20:47:51] Rejected difficulty shares: 0
[2014-05-01 20:47:51] Hardware errors: 0
[2014-05-01 20:47:51] Utility (accepted shares / min): 0.00/min
[2014-05-01 20:47:51] Work Utility (diff1 shares solved / min): 0.00/min
[2014-05-01 20:47:51] Stale submissions discarded due to new blocks: 0
[2014-05-01 20:47:51] Unable to get work from server occasions: 0
[2014-05-01 20:47:51] Work items generated locally: 5
[2014-05-01 20:47:51] Submitting work remotely delay occasions: 0
[2014-05-01 20:47:51] New blocks detected on network: 1
[2014-05-01 20:47:51] Summary of per device statistics:
[2014-05-01 20:47:51] AV20 (5s):0.000 (avg):0.000h/s | A:0 R:0 HW:0 WU:0.0/m
[2014-05-01 20:47:51]
root@OpenWrt:~#
500 --avalon2-fan 90
[2014-05-01 20:47:51]
Summary of runtime statistics:
[2014-05-01 20:47:51] Started at [2014-05-01 20:47:50]
[2014-05-01 20:47:51] Pool: http://192.168.100.75:9332
[2014-05-01 20:47:51] Runtime: 0 hrs : 0 mins : 0 secs
[2014-05-01 20:47:51] Average hashrate: 0.0 Mhash/s
[2014-05-01 20:47:51] Solved blocks: 0
[2014-05-01 20:47:51] Best share difficulty: 0
[2014-05-01 20:47:51] Share submissions: 0
[2014-05-01 20:47:51] Accepted shares: 0
[2014-05-01 20:47:51] Rejected shares: 0
[2014-05-01 20:47:51] Accepted difficulty shares: 0
[2014-05-01 20:47:51] Rejected difficulty shares: 0
[2014-05-01 20:47:51] Hardware errors: 0
[2014-05-01 20:47:51] Utility (accepted shares / min): 0.00/min
[2014-05-01 20:47:51] Work Utility (diff1 shares solved / min): 0.00/min
[2014-05-01 20:47:51] Stale submissions discarded due to new blocks: 0
[2014-05-01 20:47:51] Unable to get work from server occasions: 0
[2014-05-01 20:47:51] Work items generated locally: 5
[2014-05-01 20:47:51] Submitting work remotely delay occasions: 0
[2014-05-01 20:47:51] New blocks detected on network: 1
[2014-05-01 20:47:51] Summary of per device statistics:
[2014-05-01 20:47:51] AV20 (5s):0.000 (avg):0.000h/s | A:0 R:0 HW:0 WU:0.0/m
[2014-05-01 20:47:51]
root@OpenWrt:~#
root@OpenWrt:~# cgminer -S /dev/ttyUSB0
[2014-05-01 20:43:23]
Summary of runtime statistics:
[2014-05-01 20:43:23] Started at [2014-05-01 20:43:23]
[2014-05-01 20:43:23] Pool: http://192.168.100.75:9332
[2014-05-01 20:43:23] Runtime: 0 hrs : 0 mins : 0 secs
[2014-05-01 20:43:23] Average hashrate: 0.0 Mhash/s
[2014-05-01 20:43:23] Solved blocks: 0
[2014-05-01 20:43:23] Best share difficulty: 0
[2014-05-01 20:43:23] Share submissions: 0
[2014-05-01 20:43:23] Accepted shares: 0
[2014-05-01 20:43:23] Rejected shares: 0
[2014-05-01 20:43:23] Accepted difficulty shares: 0
[2014-05-01 20:43:23] Rejected difficulty shares: 0
[2014-05-01 20:43:23] Hardware errors: 0
[2014-05-01 20:43:23] Utility (accepted shares / min): 0.00/min
[2014-05-01 20:43:23] Work Utility (diff1 shares solved / min): 0.00/min
[2014-05-01 20:43:23] Stale submissions discarded due to new blocks: 0
[2014-05-01 20:43:23] Unable to get work from server occasions: 0
[2014-05-01 20:43:23] Work items generated locally: 5
[2014-05-01 20:43:23] Submitting work remotely delay occasions: 0
[2014-05-01 20:43:23] New blocks detected on network: 1
[2014-05-01 20:43:23] Summary of per device statistics:
[2014-05-01 20:43:23] AV20 (5s):0.000 (avg):0.000h/s | A:0 R:0 HW:0 WU:0.0/m
[2014-05-01 20:43:23]
[2014-05-01 20:43:23]
Summary of runtime statistics:
[2014-05-01 20:43:23] Started at [2014-05-01 20:43:23]
[2014-05-01 20:43:23] Pool: http://192.168.100.75:9332
[2014-05-01 20:43:23] Runtime: 0 hrs : 0 mins : 0 secs
[2014-05-01 20:43:23] Average hashrate: 0.0 Mhash/s
[2014-05-01 20:43:23] Solved blocks: 0
[2014-05-01 20:43:23] Best share difficulty: 0
[2014-05-01 20:43:23] Share submissions: 0
[2014-05-01 20:43:23] Accepted shares: 0
[2014-05-01 20:43:23] Rejected shares: 0
[2014-05-01 20:43:23] Accepted difficulty shares: 0
[2014-05-01 20:43:23] Rejected difficulty shares: 0
[2014-05-01 20:43:23] Hardware errors: 0
[2014-05-01 20:43:23] Utility (accepted shares / min): 0.00/min
[2014-05-01 20:43:23] Work Utility (diff1 shares solved / min): 0.00/min
[2014-05-01 20:43:23] Stale submissions discarded due to new blocks: 0
[2014-05-01 20:43:23] Unable to get work from server occasions: 0
[2014-05-01 20:43:23] Work items generated locally: 5
[2014-05-01 20:43:23] Submitting work remotely delay occasions: 0
[2014-05-01 20:43:23] New blocks detected on network: 1
[2014-05-01 20:43:23] Summary of per device statistics:
[2014-05-01 20:43:23] AV20 (5s):0.000 (avg):0.000h/s | A:0 R:0 HW:0 WU:0.0/m
[2014-05-01 20:43:23]
[MOD EDIT: Put into code tags]
Code:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.10.34 ([email protected]) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.01 r40351) ) #2 Wed Apr 23 13:55:07 CST 2014
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: BCM2708
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] free_area_init_node: node 0, pgdat c0390718, node_mem_map c03f9000
[ 0.000000] Normal zone: 896 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 114688 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708.boardrev=0xd bcm2708.serial=0x293d8688 smsc95xx.macaddr=B8:27:EB:3D:86:88 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 rpitestmode=1 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 448MB = 448MB total
[ 0.000000] Memory: 450644k/450644k available, 8108k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdc800000 - 0xff000000 ( 552 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc036eef0 (3484 kB)
[ 0.000000] .init : 0xc036f000 - 0xc0388d30 ( 104 kB)
[ 0.000000] .data : 0xc038a000 - 0xc03af328 ( 149 kB)
[ 0.000000] .bss : 0xc03af328 - 0xc03f8ec8 ( 295 kB)
[ 0.000000] NR_IRQS:330
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.000766] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[ 0.000811] pid_max: default: 32768 minimum: 301
[ 0.000956] Mount-cache hash table entries: 512
[ 0.001603] CPU: Testing write buffer coherency: ok
[ 0.001947] Setting up static identity map for 0xc000f4b8 - 0xc000f514
[ 0.003009] devtmpfs: initialized
[ 0.004395] NET: Registered protocol family 16
[ 0.009190] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.009938] bcm2708.uart_clock = 0
[ 0.011267] mailbox: Broadcom VideoCore Mailbox driver
[ 0.011361] bcm2708_vcio: mailbox at f200b880
[ 0.011451] bcm_power: Broadcom power driver
[ 0.011483] bcm_power_open() -> 0
[ 0.011503] bcm_power_request(0, 8)
[ 0.512205] bcm_mailbox_read -> 00000080, 0
[ 0.512240] bcm_power_request -> 0
[ 0.512261] Serial: AMBA PL011 UART driver
[ 0.512382] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[ 0.796179] console [ttyAMA0] enabled
[ 0.818004] bio: create slab at 0
[ 0.822968] SCSI subsystem initialized
[ 0.826983] usbcore: registered new interface driver usbfs
[ 0.832554] usbcore: registered new interface driver hub
[ 0.838070] usbcore: registered new device driver usb
[ 0.844334] Switching to clocksource stc
[ 0.859757] NET: Registered protocol family 2
[ 0.864875] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.872123] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.878665] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.885096] TCP: reno registered
[ 0.888376] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.894236] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.900841] NET: Registered protocol family 1
[ 0.905794] bcm2708_dma: DMA manager at f2007000
[ 0.910589] bcm2708_gpio: bcm2708_gpio_probe c03935b8
[ 0.915985] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 0.924645] major device number 253
[ 0.924665] vma list size 12, page list size 2008, page size 4096
[ 0.924684] allocated dma channel 2 (f2007200), initial state 00000008
[ 0.924694] post-reset 00000008
[ 0.926197] msgmni has been set to 880
[ 0.930889] io scheduler noop registered
[ 0.934843] io scheduler deadline registered
[ 0.939234] io scheduler cfq registered (default)
[ 0.944263] BCM2708FB: allocated DMA memory 5b8f0000
[ 0.949304] BCM2708FB: allocated DMA channel 0 @ f2007000
[ 0.966855] Console: switching to colour frame buffer device 82x26
[ 0.984788] brd: module loaded
[ 0.993290] loop: module loaded
[ 0.998005] vchiq: vchiq_init_state: slot_zero = 0xdc804000, is_master = 0
[ 1.007134] usbcore: registered new interface driver smsc95xx
[ 1.014526] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.222045] Core Release: 2.80a
[ 1.226512] Setting default values for core params
[ 1.232622] Finished setting default values for core params
[ 1.439522] Using Buffer DMA mode
[ 1.444086] Periodic Transfer Interrupt Enhancement - disabled
[ 1.451194] Multiprocessor Interrupt Enhancement - disabled
[ 1.458035] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.463650] Dedicated Tx FIFOs mode
[ 1.468540] dwc_otg: Microframe scheduler enabled
[ 1.468596] dwc_otg bcm2708_usb: DWC OTG Controller
[ 1.474758] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 1.483315] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 1.490118] Init: Port Power? op_state=1
[ 1.495308] Init: Power Port (0)
[ 1.499892] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.508003] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.516560] usb usb1: Product: DWC OTG Controller
[ 1.522576] usb usb1: Manufacturer: Linux 3.10.34 dwc_otg_hcd
[ 1.529671] usb usb1: SerialNumber: bcm2708_usb
[ 1.536295] hub 1-0:1.0: USB hub found
[ 1.541423] hub 1-0:1.0: 1 port detected
[ 1.546949] dwc_otg: FIQ enabled
[ 1.546966] dwc_otg: NAK holdoff enabled
[ 1.546976] dwc_otg: FIQ split fix enabled
[ 1.546997] Module dwc_common_port init
[ 1.547341] usbcore: registered new interface driver usb-storage
[ 1.555076] mousedev: PS/2 mouse device common for all mice
[ 1.562178] bcm2708 watchdog, heartbeat=10 sec (nowayout=0)
[ 1.569067] cpuidle: using governor ladder
[ 1.574395] cpuidle: using governor menu
[ 1.579587] sdhci: Secure Digital Host Controller Interface driver
[ 1.586978] sdhci: Copyright(c) Pierre Ossman
[ 1.592634] sdhci: Enable low-latency mode
[ 1.638458] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[ 1.648748] mmc0: BCM2708 SDHC host at 0x20300000 DMA 4 IRQ 20
[ 1.655912] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.663540] TCP: cubic registered
[ 1.668176] NET: Registered protocol family 17
[ 1.674034] 8021q: 802.1Q VLAN Support v1.8
[ 1.679947] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 1.693655] Waiting for root device /dev/mmcblk0p2...
[ 1.738489] Indeed it is in host mode hprt0 = 00021501
[ 1.840977] mmc0: read SD Status register (SSR) after 4 attempts
[ 1.855638] mmc0: new high speed SDHC card at address 1234
[ 1.863088] mmcblk0: mmc0:1234 SA04G 3.63 GiB
[ 1.870939] mmcblk0: p1 p2
[ 1.918873] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.926961] Indeed it is in host mode hprt0 = 00001101
[ 2.004464] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
[ 2.015025] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 2.022977] Freeing unused kernel memory: 100K (c036f000 - c0388000)
[ 2.129312] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 2.137666] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.149335] hub 1-1:1.0: USB hub found
[ 2.155402] hub 1-1:1.0: 3 ports detected
[ 2.438707] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 2.559086] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 2.567432] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.580438] smsc95xx v1.0.4
[ 2.643663] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:3d:86:88
[ 2.738562] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
[ 2.859223] usb 1-1.3: New USB device found, idVendor=1a40, idProduct=0201
[ 2.867573] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.876340] usb 1-1.3: Product: USB 2.0 Hub [MTT]
[ 2.883593] hub 1-1.3:1.0: USB hub found
[ 2.889243] hub 1-1.3:1.0: 7 ports detected
[ 3.168636] usb 1-1.3.2: new high-speed USB device number 5 using dwc_otg
[ 3.289417] usb 1-1.3.2: New USB device found, idVendor=1a40, idProduct=0201
[ 3.297849] usb 1-1.3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.307974] usb 1-1.3.2: Product: USB 2.0 Hub [MTT]
[ 3.315374] hub 1-1.3.2:1.0: USB hub found
[ 3.321300] hub 1-1.3.2:1.0: 7 ports detected
[ 3.408534] usb 1-1.3.3: new high-speed USB device number 6 using dwc_otg
[ 3.519419] usb 1-1.3.3: New USB device found, idVendor=1a40, idProduct=0201
[ 3.527974] usb 1-1.3.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.538181] usb 1-1.3.3: Product: USB 2.0 Hub [MTT]
[ 3.545585] hub 1-1.3.3:1.0: USB hub found
[ 3.551489] hub 1-1.3.3:1.0: 7 ports detected
[ 3.858601] usb 1-1.3.3.3: new full-speed USB device number 7 using dwc_otg
[ 3.984448] usb 1-1.3.3.3: New USB device found, idVendor=067b, idProduct=2303
[ 3.993083] usb 1-1.3.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.003297] usb 1-1.3.3.3: Product: USB-Serial Controller D
[ 4.010245] usb 1-1.3.3.3: Manufacturer: Prolific Technology Inc.
[ 6.403893] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 8.054296] NET: Registered protocol family 10
[ 8.093359] nf_conntrack version 0.5.0 (7042 buckets, 28168 max)
[ 8.105781] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.136034] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.170803] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.195549] usbcore: registered new interface driver usbhid
[ 8.202531] usbhid: USB HID core driver
[ 8.210845] usbcore: registered new interface driver usbserial
[ 8.218142] usbcore: registered new interface driver usbserial_generic
[ 8.226079] usbserial: USB Serial support registered for generic
[ 8.250016] xt_time: kernel timezone is -0000
[ 8.257793] usbcore: registered new interface driver ftdi_sio
[ 8.265044] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 8.280962] usbcore: registered new interface driver pl2303
[ 8.287976] usbserial: USB Serial support registered for pl2303
[ 8.295283] pl2303 1-1.3.3.3:1.0: pl2303 converter detected
[ 8.312087] usb 1-1.3.3.3: pl2303 converter now attached to ttyUSB0
[ 8.322465] PPP generic driver version 2.4.2
[ 8.329799] NET: Registered protocol family 24
[ 11.722317] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 11.731652] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.760936] device eth0 entered promiscuous mode
[ 11.774753] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 13.231871] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xD1E1
[ 13.256036] br-lan: port 1(eth0) entered forwarding state
[ 13.263126] br-lan: port 1(eth0) entered forwarding state
[ 13.270061] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.285361] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 15.258380] br-lan: port 1(eth0) entered forwarding state
Kernel log, if it's any use[ 0.000000] Linux version 3.10.34 ([email protected]) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.01 r40351) ) #2 Wed Apr 23 13:55:07 CST 2014
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: BCM2708
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] free_area_init_node: node 0, pgdat c0390718, node_mem_map c03f9000
[ 0.000000] Normal zone: 896 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 114688 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708.boardrev=0xd bcm2708.serial=0x293d8688 smsc95xx.macaddr=B8:27:EB:3D:86:88 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 rpitestmode=1 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 448MB = 448MB total
[ 0.000000] Memory: 450644k/450644k available, 8108k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdc800000 - 0xff000000 ( 552 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc036eef0 (3484 kB)
[ 0.000000] .init : 0xc036f000 - 0xc0388d30 ( 104 kB)
[ 0.000000] .data : 0xc038a000 - 0xc03af328 ( 149 kB)
[ 0.000000] .bss : 0xc03af328 - 0xc03f8ec8 ( 295 kB)
[ 0.000000] NR_IRQS:330
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.000766] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[ 0.000811] pid_max: default: 32768 minimum: 301
[ 0.000956] Mount-cache hash table entries: 512
[ 0.001603] CPU: Testing write buffer coherency: ok
[ 0.001947] Setting up static identity map for 0xc000f4b8 - 0xc000f514
[ 0.003009] devtmpfs: initialized
[ 0.004395] NET: Registered protocol family 16
[ 0.009190] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.009938] bcm2708.uart_clock = 0
[ 0.011267] mailbox: Broadcom VideoCore Mailbox driver
[ 0.011361] bcm2708_vcio: mailbox at f200b880
[ 0.011451] bcm_power: Broadcom power driver
[ 0.011483] bcm_power_open() -> 0
[ 0.011503] bcm_power_request(0, 8)
[ 0.512205] bcm_mailbox_read -> 00000080, 0
[ 0.512240] bcm_power_request -> 0
[ 0.512261] Serial: AMBA PL011 UART driver
[ 0.512382] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[ 0.796179] console [ttyAMA0] enabled
[ 0.818004] bio: create slab
[ 0.822968] SCSI subsystem initialized
[ 0.826983] usbcore: registered new interface driver usbfs
[ 0.832554] usbcore: registered new interface driver hub
[ 0.838070] usbcore: registered new device driver usb
[ 0.844334] Switching to clocksource stc
[ 0.859757] NET: Registered protocol family 2
[ 0.864875] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.872123] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.878665] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.885096] TCP: reno registered
[ 0.888376] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.894236] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.900841] NET: Registered protocol family 1
[ 0.905794] bcm2708_dma: DMA manager at f2007000
[ 0.910589] bcm2708_gpio: bcm2708_gpio_probe c03935b8
[ 0.915985] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 0.924645] major device number 253
[ 0.924665] vma list size 12, page list size 2008, page size 4096
[ 0.924684] allocated dma channel 2 (f2007200), initial state 00000008
[ 0.924694] post-reset 00000008
[ 0.926197] msgmni has been set to 880
[ 0.930889] io scheduler noop registered
[ 0.934843] io scheduler deadline registered
[ 0.939234] io scheduler cfq registered (default)
[ 0.944263] BCM2708FB: allocated DMA memory 5b8f0000
[ 0.949304] BCM2708FB: allocated DMA channel 0 @ f2007000
[ 0.966855] Console: switching to colour frame buffer device 82x26
[ 0.984788] brd: module loaded
[ 0.993290] loop: module loaded
[ 0.998005] vchiq: vchiq_init_state: slot_zero = 0xdc804000, is_master = 0
[ 1.007134] usbcore: registered new interface driver smsc95xx
[ 1.014526] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.222045] Core Release: 2.80a
[ 1.226512] Setting default values for core params
[ 1.232622] Finished setting default values for core params
[ 1.439522] Using Buffer DMA mode
[ 1.444086] Periodic Transfer Interrupt Enhancement - disabled
[ 1.451194] Multiprocessor Interrupt Enhancement - disabled
[ 1.458035] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.463650] Dedicated Tx FIFOs mode
[ 1.468540] dwc_otg: Microframe scheduler enabled
[ 1.468596] dwc_otg bcm2708_usb: DWC OTG Controller
[ 1.474758] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 1.483315] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 1.490118] Init: Port Power? op_state=1
[ 1.495308] Init: Power Port (0)
[ 1.499892] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.508003] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.516560] usb usb1: Product: DWC OTG Controller
[ 1.522576] usb usb1: Manufacturer: Linux 3.10.34 dwc_otg_hcd
[ 1.529671] usb usb1: SerialNumber: bcm2708_usb
[ 1.536295] hub 1-0:1.0: USB hub found
[ 1.541423] hub 1-0:1.0: 1 port detected
[ 1.546949] dwc_otg: FIQ enabled
[ 1.546966] dwc_otg: NAK holdoff enabled
[ 1.546976] dwc_otg: FIQ split fix enabled
[ 1.546997] Module dwc_common_port init
[ 1.547341] usbcore: registered new interface driver usb-storage
[ 1.555076] mousedev: PS/2 mouse device common for all mice
[ 1.562178] bcm2708 watchdog, heartbeat=10 sec (nowayout=0)
[ 1.569067] cpuidle: using governor ladder
[ 1.574395] cpuidle: using governor menu
[ 1.579587] sdhci: Secure Digital Host Controller Interface driver
[ 1.586978] sdhci: Copyright(c) Pierre Ossman
[ 1.592634] sdhci: Enable low-latency mode
[ 1.638458] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[ 1.648748] mmc0: BCM2708 SDHC host at 0x20300000 DMA 4 IRQ 20
[ 1.655912] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.663540] TCP: cubic registered
[ 1.668176] NET: Registered protocol family 17
[ 1.674034] 8021q: 802.1Q VLAN Support v1.8
[ 1.679947] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 1.693655] Waiting for root device /dev/mmcblk0p2...
[ 1.738489] Indeed it is in host mode hprt0 = 00021501
[ 1.840977] mmc0: read SD Status register (SSR) after 4 attempts
[ 1.855638] mmc0: new high speed SDHC card at address 1234
[ 1.863088] mmcblk0: mmc0:1234 SA04G 3.63 GiB
[ 1.870939] mmcblk0: p1 p2
[ 1.918873] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.926961] Indeed it is in host mode hprt0 = 00001101
[ 2.004464] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
[ 2.015025] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 2.022977] Freeing unused kernel memory: 100K (c036f000 - c0388000)
[ 2.129312] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 2.137666] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.149335] hub 1-1:1.0: USB hub found
[ 2.155402] hub 1-1:1.0: 3 ports detected
[ 2.438707] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 2.559086] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 2.567432] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.580438] smsc95xx v1.0.4
[ 2.643663] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:3d:86:88
[ 2.738562] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
[ 2.859223] usb 1-1.3: New USB device found, idVendor=1a40, idProduct=0201
[ 2.867573] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.876340] usb 1-1.3: Product: USB 2.0 Hub [MTT]
[ 2.883593] hub 1-1.3:1.0: USB hub found
[ 2.889243] hub 1-1.3:1.0: 7 ports detected
[ 3.168636] usb 1-1.3.2: new high-speed USB device number 5 using dwc_otg
[ 3.289417] usb 1-1.3.2: New USB device found, idVendor=1a40, idProduct=0201
[ 3.297849] usb 1-1.3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.307974] usb 1-1.3.2: Product: USB 2.0 Hub [MTT]
[ 3.315374] hub 1-1.3.2:1.0: USB hub found
[ 3.321300] hub 1-1.3.2:1.0: 7 ports detected
[ 3.408534] usb 1-1.3.3: new high-speed USB device number 6 using dwc_otg
[ 3.519419] usb 1-1.3.3: New USB device found, idVendor=1a40, idProduct=0201
[ 3.527974] usb 1-1.3.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.538181] usb 1-1.3.3: Product: USB 2.0 Hub [MTT]
[ 3.545585] hub 1-1.3.3:1.0: USB hub found
[ 3.551489] hub 1-1.3.3:1.0: 7 ports detected
[ 3.858601] usb 1-1.3.3.3: new full-speed USB device number 7 using dwc_otg
[ 3.984448] usb 1-1.3.3.3: New USB device found, idVendor=067b, idProduct=2303
[ 3.993083] usb 1-1.3.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.003297] usb 1-1.3.3.3: Product: USB-Serial Controller D
[ 4.010245] usb 1-1.3.3.3: Manufacturer: Prolific Technology Inc.
[ 6.403893] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 8.054296] NET: Registered protocol family 10
[ 8.093359] nf_conntrack version 0.5.0 (7042 buckets, 28168 max)
[ 8.105781] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.136034] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.170803] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.195549] usbcore: registered new interface driver usbhid
[ 8.202531] usbhid: USB HID core driver
[ 8.210845] usbcore: registered new interface driver usbserial
[ 8.218142] usbcore: registered new interface driver usbserial_generic
[ 8.226079] usbserial: USB Serial support registered for generic
[ 8.250016] xt_time: kernel timezone is -0000
[ 8.257793] usbcore: registered new interface driver ftdi_sio
[ 8.265044] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 8.280962] usbcore: registered new interface driver pl2303
[ 8.287976] usbserial: USB Serial support registered for pl2303
[ 8.295283] pl2303 1-1.3.3.3:1.0: pl2303 converter detected
[ 8.312087] usb 1-1.3.3.3: pl2303 converter now attached to ttyUSB0
[ 8.322465] PPP generic driver version 2.4.2
[ 8.329799] NET: Registered protocol family 24
[ 11.722317] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 11.731652] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.760936] device eth0 entered promiscuous mode
[ 11.774753] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 13.231871] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xD1E1
[ 13.256036] br-lan: port 1(eth0) entered forwarding state
[ 13.263126] br-lan: port 1(eth0) entered forwarding state
[ 13.270061] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.285361] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 15.258380] br-lan: port 1(eth0) entered forwarding state
It was hashing before only at around 70Gh, then i upgraded the firmware and now nothing:(
Hmmmm
man it is hard to say was the unit hashing before and just stop or did you just get the unit?
man it is hard to say was the unit hashing before and just stop or did you just get the unit?
NTP Service(Default: ASIA) OpenWrtDefault
i've got this error inthe kernel log;
Thu May 1 20:15:45 2014 user.emerg syslog: Error: Failed to connect to ubus
then further down;
Thu May 1 20:16:20 2014 user.emerg syslog: ntpd: reply from 109.74.192.97: reach 0xff offset 0.083699 delay 0.020919 status 0x24 strat 3 refid 0x0d7612b2 rootdelay 0.003235
Thu May 1 20:16:20 2014 user.emerg syslog: - init complete -
Thu May 1 20:18:01 2014 cron.info crond[321]: crond: USER root pid 563 cmd /usr/bin/cgminer-monitor
Time zone is good
ip is static
system set to Failover
Chip Frequency(Avalon2: 1500, Avalon3: 450) 1500
Chip Voltage(Avalon2: 10000, Avalon3: 6625) 10000
Fan%(Default: 90%) 90
API Allow(Default: W:127.0.0.1) W:127.0.0.1
More Options(Default: --quiet) --real-quiet
Thu May 1 20:15:45 2014 user.emerg syslog: Error: Failed to connect to ubus
then further down;
Thu May 1 20:16:20 2014 user.emerg syslog: ntpd: reply from 109.74.192.97: reach 0xff offset 0.083699 delay 0.020919 status 0x24 strat 3 refid 0x0d7612b2 rootdelay 0.003235
Thu May 1 20:16:20 2014 user.emerg syslog: - init complete -
Thu May 1 20:18:01 2014 cron.info crond[321]: crond: USER root pid 563 cmd /usr/bin/cgminer-monitor
Time zone is good
ip is static
system set to Failover
Chip Frequency(Avalon2: 1500, Avalon3: 450) 1500
Chip Voltage(Avalon2: 10000, Avalon3: 6625) 10000
Fan%(Default: 90%) 90
API Allow(Default: W:127.0.0.1) W:127.0.0.1
More Options(Default: --quiet) --real-quiet
it's a customized debian.
ntp synch is ok, all network diagnostics are ok. I dont get it
ntp synch is ok, all network diagnostics are ok. I dont get it
do you have your time zone set correctly on the unit?
Do you have your unit set to DHCP or to a static IP?
What are your settings for Chip Freq, Voltage, all the settings below the Pool related options
it's a customized debian.
ntp synch is ok, all network diagnostics are ok. I dont get it
ntp synch is ok, all network diagnostics are ok. I dont get it
dpkg: error processing teamviewer_linux.deb (--install):
package architecture (i386) does not match system (amd64)
Errors were encountered while processing:
teamviewer_linux.deb
package architecture (i386) does not match system (amd64)
Errors were encountered while processing:
teamviewer_linux.deb
What flavor of Linux you running
if it's any help, i've ssh'd on and can see /dev/ttyUSB0 ok
cgminer just crashes with no error message when i try to start it manually
cgminer just crashes with no error message when i try to start it manually
dpkg: error processing teamviewer_linux.deb (--install):
package architecture (i386) does not match system (amd64)
Errors were encountered while processing:
teamviewer_linux.deb
package architecture (i386) does not match system (amd64)
Errors were encountered while processing:
teamviewer_linux.deb
If you are running ubuntu No matter if you are running the 64bit os you have to install the 32bit version
it can be a mix of issues that can keep the unit from hashing
it can be a mix of issues that can keep the unit from hashing
Hi, I'm having problems installing teamviewer on my linux, 32/64bit issues
can you just point me in the right direction or is it a complicated fix?
can you just point me in the right direction or is it a complicated fix?
Hi,
I have an Avalon2 Single Module – 105
This is my error;
[Firmware Version] => 20140423
cgminer: 2077365
cgminer-openwrt-packages: 4565c9d
luci: dfa7134
Socket connect failed: Connection refused
Raspi build from here; http://downloads.canaan-creative.com/software/avalon2/latest/
Am i running the wrong software?
I have an Avalon2 Single Module – 105
This is my error;
[Firmware Version] => 20140423
cgminer: 2077365
cgminer-openwrt-packages: 4565c9d
luci: dfa7134
Socket connect failed: Connection refused
Raspi build from here; http://downloads.canaan-creative.com/software/avalon2/latest/
Am i running the wrong software?
Most likely not But if you have teamviewer I can help you get this unit running
That unit is My Specialty
Hi,
I have an Avalon2 Single Module – 105
This is my error;
[Firmware Version] => 20140423
cgminer: 2077365
cgminer-openwrt-packages: 4565c9d
luci: dfa7134
Socket connect failed: Connection refused
Raspi build from here; http://downloads.canaan-creative.com/software/avalon2/latest/
Am i running the wrong software?
I have an Avalon2 Single Module – 105
This is my error;
[Firmware Version] => 20140423
cgminer: 2077365
cgminer-openwrt-packages: 4565c9d
luci: dfa7134
Socket connect failed: Connection refused
Raspi build from here; http://downloads.canaan-creative.com/software/avalon2/latest/
Am i running the wrong software?
Jump to: