back to the avalon 4.1 my second one is on its way. I have a dhl number. I will post a 2x miner setup soon on my thread.
https://bitcointalksearch.org/topic/review-of-avalon-41-951758
Topic: Avalon ASIC users thread - page 12. (Read 438575 times)
You are welcome.
I get usually 3.6 to 4.2 gh/s with them on BTCGuild and about 3.4 to 3.8 gh/s on AntPool.
If you have a fan on them so they stay cooler they get the higher speeds.
I get usually 3.6 to 4.2 gh/s with them on BTCGuild and about 3.4 to 3.8 gh/s on AntPool.
If you have a fan on them so they stay cooler they get the higher speeds.
I use this one with BFGMiner.
http://www.lpcware.com/system/files/lpcopen_examples_windows_usb_drivers_v1_10_0.zip
Thanks I got it to work. what should it do 3- 4gh? as I am getting about 3.4gh. on mmpool
http://www.lpcware.com/system/files/lpcopen_examples_windows_usb_drivers_v1_10_0.zip
Thanks I got it to work. what should it do 3- 4gh? as I am getting about 3.4gh. on mmpool
Check this guys
https://mega.co.nz/#!aEEyhZyB!4t8mnLiymhlvBsHH_uSUs1C0pYDXWLvGuYb95T4abL4
There is a video inside the folder explaining everything.
Work perfectly for me. Around 4 gh.
Cheer
Valkir
I am trying that now https://mega.co.nz/#!aEEyhZyB!4t8mnLiymhlvBsHH_uSUs1C0pYDXWLvGuYb95T4abL4
There is a video inside the folder explaining everything.
Work perfectly for me. Around 4 gh.
Cheer
Valkir
Check this guys
https://mega.co.nz/#!aEEyhZyB!4t8mnLiymhlvBsHH_uSUs1C0pYDXWLvGuYb95T4abL4
There is a video inside the folder explaining everything.
Work perfectly for me. Around 4 gh.
Cheer
Valkir
https://mega.co.nz/#!aEEyhZyB!4t8mnLiymhlvBsHH_uSUs1C0pYDXWLvGuYb95T4abL4
There is a video inside the folder explaining everything.
Work perfectly for me. Around 4 gh.
Cheer
Valkir
I use this one with BFGMiner.
http://www.lpcware.com/system/files/lpcopen_examples_windows_usb_drivers_v1_10_0.zip
Thanks I got it to work. what should it do 3- 4gh? as I am getting about 3.4gh. on mmpool
http://www.lpcware.com/system/files/lpcopen_examples_windows_usb_drivers_v1_10_0.zip
Thanks I got it to work. what should it do 3- 4gh? as I am getting about 3.4gh. on mmpool
I use this one with BFGMiner.
http://www.lpcware.com/system/files/lpcopen_examples_windows_usb_drivers_v1_10_0.zip
what driver does the stick need?
http://www.lpcware.com/system/files/lpcopen_examples_windows_usb_drivers_v1_10_0.zip
The Nano is fun and works great with bfgminer when the right driver is installed. I'm not sure if like in Minera you can run a 2nd Miner on the RPi with the wrt image.
That might work.
I can try this weekend and let you know.
I do have Nanos running ok with MultiMiner node as well.
this link should have info somewhere. I have a 4.1 800-1000gh miner. But they gifted a usb to me.
I have not done an usb in 1 year So If you figure out how to I would run mine as well as my 4.1
That might work.
I can try this weekend and let you know.
I do have Nanos running ok with MultiMiner node as well.
Notsure if this is the right place but can i use a Raspberry Pi with the Avalon Nano usb?
Edit: using Raspbian as os
Edit: using Raspbian as os
this link should have info somewhere. I have a 4.1 800-1000gh miner. But they gifted a usb to me.
I have not done an usb in 1 year So If you figure out how to I would run mine as well as my 4.1
what driver does the stick need?
The Nano is fun and works great with bfgminer when the right driver is installed. I'm not sure if like in Minera you can run a 2nd Miner on the RPi with the wrt image.
That might work.
I can try this weekend and let you know.
I do have Nanos running ok with MultiMiner node as well.
this link should have info somewhere. I have a 4.1 800-1000gh miner. But they gifted a usb to me.
I have not done an usb in 1 year So If you figure out how to I would run mine as well as my 4.1
That might work.
I can try this weekend and let you know.
I do have Nanos running ok with MultiMiner node as well.
Notsure if this is the right place but can i use a Raspberry Pi with the Avalon Nano usb?
Edit: using Raspbian as os
Edit: using Raspbian as os
this link should have info somewhere. I have a 4.1 800-1000gh miner. But they gifted a usb to me.
I have not done an usb in 1 year So If you figure out how to I would run mine as well as my 4.1
what driver does the stick need?
The Nano is fun and works great with bfgminer when the right driver is installed. I'm not sure if like in Minera you can run a 2nd Miner on the RPi with the wrt image.
That might work.
I can try this weekend and let you know.
I do have Nanos running ok with MultiMiner node as well.
this link should have info somewhere. I have a 4.1 800-1000gh miner. But they gifted a usb to me.
I have not done an usb in 1 year So If you figure out how to I would run mine as well as my 4.1
That might work.
I can try this weekend and let you know.
I do have Nanos running ok with MultiMiner node as well.
Notsure if this is the right place but can i use a Raspberry Pi with the Avalon Nano usb?
Edit: using Raspbian as os
Edit: using Raspbian as os
this link should have info somewhere. I have a 4.1 800-1000gh miner. But they gifted a usb to me.
I have not done an usb in 1 year So If you figure out how to I would run mine as well as my 4.1
Notsure if this is the right place but can i use a Raspberry Pi with the Avalon Nano usb?
Edit: using Raspbian as os
Edit: using Raspbian as os
this link should have info somewhere. I have a 4.1 800-1000gh miner. But they gifted a usb to me.
I have not done an usb in 1 year So If you figure out how to I would run mine as well as my 4.1
Notsure if this is the right place but can i use a Raspberry Pi with the Avalon Nano usb?
Edit: using Raspbian as os
Edit: using Raspbian as os
Good to know I will try it right now.
Thanks for the link.
Thanks for the link.
I was able to flash an 8gb sdcard with this link
Firmware Details:
RPi/703N Firmware
http://downloads.canaan-creative.com/software/avalon4/openwrt/20150213_0800/
pretty good numbers so far.
Firmware Details:
RPi/703N Firmware
http://downloads.canaan-creative.com/software/avalon4/openwrt/20150213_0800/
pretty good numbers so far.
I was able to flash an 8gb sdcard with this link
Firmware Details:
RPi/703N Firmware
http://downloads.canaan-creative.com/software/avalon4/openwrt/20150213_0800/
pretty good numbers so far.
Firmware Details:
RPi/703N Firmware
http://downloads.canaan-creative.com/software/avalon4/openwrt/20150213_0800/
pretty good numbers so far.
New MM firmware released for Avalon4, Hardware model: MM-4.1, Version: 411502-d517e210
Firmware Details:
http://downloads.canaan-creative.com/software/avalon4/mm41/2015-02-14/
ChangeLog:
* Add a bootloader feature, auto reboot after download
* Feed watchdog when get package because it's a block function
* Fix system crash when modify the miner_id by unintentionally
* Change compile flag from MBOOT to BOOTLOADER
* Support mm config load & save
Fengling
Firmware Details:
http://downloads.canaan-creative.com/software/avalon4/mm41/2015-02-14/
ChangeLog:
* Add a bootloader feature, auto reboot after download
* Feed watchdog when get package because it's a block function
* Fix system crash when modify the miner_id by unintentionally
* Change compile flag from MBOOT to BOOTLOADER
* Support mm config load & save
Fengling
New firmware released for Avalon4 RPi/703N, Version: Canaan A4-20150213
Firmware Details:
RPi/703N Firmware
http://downloads.canaan-creative.com/software/avalon4/openwrt/20150213_0800/
ChangeLog:
* Increase the voltage adjustment range for individual PMU
* Display voltage refrence in CGMiner status when CGMiner run with debug
* Add mining mode option for Avalon4
* Fix cutoff for individual voltage adjustment
* Fix hash counter when used a broken Avalon4 (DH almost 100%)
* Change voltage adjust interval from 8m to 30s (Support all MM4.1 and MM4.0 >= 401501-4778d610)
* Add freeze safe mode function
* Update frequency table (Step:125)
* Rewrite mm-tools, it will not compatile with the old one
Happy Spring Festival
Fengling
Firmware Details:
RPi/703N Firmware
http://downloads.canaan-creative.com/software/avalon4/openwrt/20150213_0800/
ChangeLog:
* Increase the voltage adjustment range for individual PMU
* Display voltage refrence in CGMiner status when CGMiner run with debug
* Add mining mode option for Avalon4
* Fix cutoff for individual voltage adjustment
* Fix hash counter when used a broken Avalon4 (DH almost 100%)
* Change voltage adjust interval from 8m to 30s (Support all MM4.1 and MM4.0 >= 401501-4778d610)
* Add freeze safe mode function
* Update frequency table (Step:125)
* Rewrite mm-tools, it will not compatile with the old one
Happy Spring Festival
Fengling
I will flash a sd card and try with my rasp pi. I will use a different sdcard so that if I load it wrong I will still have a good card.
try it as you like, you can also upgrade you avalon4 machine with the new raspberry pi firmware.
New firmware released for Avalon4 RPi/703N, Version: Canaan A4-20150213
Firmware Details:
RPi/703N Firmware
http://downloads.canaan-creative.com/software/avalon4/openwrt/20150213_0800/
ChangeLog:
* Increase the voltage adjustment range for individual PMU
* Display voltage refrence in CGMiner status when CGMiner run with debug
* Add mining mode option for Avalon4
* Fix cutoff for individual voltage adjustment
* Fix hash counter when used a broken Avalon4 (DH almost 100%)
* Change voltage adjust interval from 8m to 30s (Support all MM4.1 and MM4.0 >= 401501-4778d610)
* Add freeze safe mode function
* Update frequency table (Step:125)
* Rewrite mm-tools, it will not compatile with the old one
Happy Spring Festival
Fengling
Firmware Details:
RPi/703N Firmware
http://downloads.canaan-creative.com/software/avalon4/openwrt/20150213_0800/
ChangeLog:
* Increase the voltage adjustment range for individual PMU
* Display voltage refrence in CGMiner status when CGMiner run with debug
* Add mining mode option for Avalon4
* Fix cutoff for individual voltage adjustment
* Fix hash counter when used a broken Avalon4 (DH almost 100%)
* Change voltage adjust interval from 8m to 30s (Support all MM4.1 and MM4.0 >= 401501-4778d610)
* Add freeze safe mode function
* Update frequency table (Step:125)
* Rewrite mm-tools, it will not compatile with the old one
Happy Spring Festival
Fengling
I will flash a sd card and try with my rasp pi. I will use a different sdcard so that if I load it wrong I will still have a good card.
New MM firmware released for Avalon4, Hardware model: MM-4.0, Version: 401502-d517e210
Firmware Details:
http://downloads.canaan-creative.com/software/avalon4/mm/2015-02-14/
ChangeLog:
* Add a bootloader feature, auto reboot after download
* Feed watchdog when get package because it's a block function
* Fix system crash when modify the miner_id by unintentionally
* Change compile flag from MBOOT to BOOTLOADER
* Support mm config load & save
Fengling
Firmware Details:
http://downloads.canaan-creative.com/software/avalon4/mm/2015-02-14/
ChangeLog:
* Add a bootloader feature, auto reboot after download
* Feed watchdog when get package because it's a block function
* Fix system crash when modify the miner_id by unintentionally
* Change compile flag from MBOOT to BOOTLOADER
* Support mm config load & save
Fengling
New firmware released for Avalon4 RPi/703N, Version: Canaan A4-20150213
Firmware Details:
RPi/703N Firmware
http://downloads.canaan-creative.com/software/avalon4/openwrt/20150213_0800/
ChangeLog:
* Increase the voltage adjustment range for individual PMU
* Display voltage refrence in CGMiner status when CGMiner run with debug
* Add mining mode option for Avalon4
* Fix cutoff for individual voltage adjustment
* Fix hash counter when used a broken Avalon4 (DH almost 100%)
* Change voltage adjust interval from 8m to 30s (Support all MM4.1 and MM4.0 >= 401501-4778d610)
* Add freeze safe mode function
* Update frequency table (Step:125)
* Rewrite mm-tools, it will not compatile with the old one
Happy Spring Festival
Fengling
Firmware Details:
RPi/703N Firmware
http://downloads.canaan-creative.com/software/avalon4/openwrt/20150213_0800/
ChangeLog:
* Increase the voltage adjustment range for individual PMU
* Display voltage refrence in CGMiner status when CGMiner run with debug
* Add mining mode option for Avalon4
* Fix cutoff for individual voltage adjustment
* Fix hash counter when used a broken Avalon4 (DH almost 100%)
* Change voltage adjust interval from 8m to 30s (Support all MM4.1 and MM4.0 >= 401501-4778d610)
* Add freeze safe mode function
* Update frequency table (Step:125)
* Rewrite mm-tools, it will not compatile with the old one
Happy Spring Festival
Fengling
I think dogie may be able to help you. looks like he did.
https://bitcointalksearch.org/topic/review-avalon-4-1000ghs694w-938679
https://bitcointalksearch.org/topic/review-avalon-4-1000ghs694w-938679
Can you help?
I got this.
Sorry, there is no sysupgrade support present, a new firmware image must be flashed manually. Please refer to the OpenWrt wiki for device specific install instructions.
How can I upgrade my firmware? My avalon4 is not mining?
I got this.
Sorry, there is no sysupgrade support present, a new firmware image must be flashed manually. Please refer to the OpenWrt wiki for device specific install instructions.
How can I upgrade my firmware? My avalon4 is not mining?
Jump to: