Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 613. (Read 703766 times)
January 29, 2017, 02:58:26 PM
I Just bought it and for now I can say I'm happy with it!
January 28, 2017, 10:47:11 AM
You cannot power cycle an A4 rig from the PI unless you are using some sort of Switched PDU. I have an APC version which allows me to remotely power on/off each of 16 C14 ports from a web interface. I think its an APC-7911
January 26, 2017, 12:15:27 PM
Hi Patrike,
Will the next update have Bitmain T9 support ?
Could you please send me an API-report (by mail) for a T9 miner so I can compare with S9? Many thanks!Will the next update have Bitmain T9 support ?
You got it in your "info" e-mail
January 26, 2017, 11:32:35 AM
Hi Patrike,
Will the next update have Bitmain T9 support ?
Could you please send me an API-report (by mail) for a T9 miner so I can compare with S9? Many thanks! Will the next update have Bitmain T9 support ?
January 26, 2017, 05:01:22 AM
Hi.
I have succesfully setup Awesome miner with my A4-s (changing pool groups + profit switching).
I only have 1 major problem left.
Sometimes when miner reset itself, there can be 2 problem scenarios:
1.) Only 3 out of 4 devices are recognized wthin a miner (I can setup a trigger to reset the miner if average hash rate too low and usually it is fixed)
2.) The devices are working with normal hashrate but are not accepting ( In this case I can also target miner temperature)
BUT In 30% of the case the manual on/off PSU power cycle is needed for miners to start working normally and start accepting.
My question is: Is there a way/know-how that Awesome miner can send a command via ssh to raspberry pi to power cycle the miner automatically?
Please advise,
Regards
Congratulations, you have an A4! Unfortunately this is normal behaviour (especially on Multipools like nicehash) and has nothing to do with Awesome Miner.I have succesfully setup Awesome miner with my A4-s (changing pool groups + profit switching).
I only have 1 major problem left.
Sometimes when miner reset itself, there can be 2 problem scenarios:
1.) Only 3 out of 4 devices are recognized wthin a miner (I can setup a trigger to reset the miner if average hash rate too low and usually it is fixed)
2.) The devices are working with normal hashrate but are not accepting ( In this case I can also target miner temperature)
BUT In 30% of the case the manual on/off PSU power cycle is needed for miners to start working normally and start accepting.
My question is: Is there a way/know-how that Awesome miner can send a command via ssh to raspberry pi to power cycle the miner automatically?
Please advise,
Regards
Awesome Miner only makes it easier to monitor this. You can find dozens of posts about that A4 issue in this forum.
January 26, 2017, 02:53:46 AM
Hi Patrike,
Will the next update have Bitmain T9 support ?
Will the next update have Bitmain T9 support ?
January 25, 2017, 06:13:10 PM
Hi.
I have succesfully setup Awesome miner with my A4-s (changing pool groups + profit switching).
I only have 1 major problem left.
Sometimes when miner reset itself, there can be 2 problem scenarios:
1.) Only 3 out of 4 devices are recognized wthin a miner (I can setup a trigger to reset the miner if average hash rate too low and usually it is fixed)
2.) The devices are working with normal hashrate but are not accepting ( In this case I can also target miner temperature)
BUT In 30% of the case the manual on/off PSU power cycle is needed for miners to start working normally and start accepting.
My question is: Is there a way/know-how that Awesome miner can send a command via ssh to raspberry pi to power cycle the miner automatically?
Please advise,
Regards
I have succesfully setup Awesome miner with my A4-s (changing pool groups + profit switching).
I only have 1 major problem left.
Sometimes when miner reset itself, there can be 2 problem scenarios:
1.) Only 3 out of 4 devices are recognized wthin a miner (I can setup a trigger to reset the miner if average hash rate too low and usually it is fixed)
2.) The devices are working with normal hashrate but are not accepting ( In this case I can also target miner temperature)
BUT In 30% of the case the manual on/off PSU power cycle is needed for miners to start working normally and start accepting.
My question is: Is there a way/know-how that Awesome miner can send a command via ssh to raspberry pi to power cycle the miner automatically?
Please advise,
Regards
January 25, 2017, 02:22:29 PM
Can Awesome miner manage the Antminer L3 Scrypt miner? Also does AM support Claymore XMR miner? I downloaded the free trial of AM, but finding it is too limited to know if this is going to work for me. You should offer a 30 day trial license of the licensed products so that we can try it to see if it is going to work.
I am interested in figuring out how to manage the L3's and how to setup profit switching in this software to mange both GPU rigs and scrypt ASIC miners. If you can recommend a tutorial on how to do this that would be great. Thanks.
Update: I tried adding an L3 to the demo copy and it reports the hash rate as 250GH instead of MH. So I don't know if it is something I set incorrectly or there is something that needs to be tweaked in AM.
Claymore XMR miner is not supported today, but will be added. Please contact me by e-mail (you will find the address in the about box of the software), and we can discuss a trial license - it's fully possible.I am interested in figuring out how to manage the L3's and how to setup profit switching in this software to mange both GPU rigs and scrypt ASIC miners. If you can recommend a tutorial on how to do this that would be great. Thanks.
Update: I tried adding an L3 to the demo copy and it reports the hash rate as 250GH instead of MH. So I don't know if it is something I set incorrectly or there is something that needs to be tweaked in AM.
The general concepts of profit switching in Awesome Miner can be found here:
http://awesomeminer.com/guide/awesomeprofit.aspx
Could you send me an API report for the L3 Scrypt Miner? Select the miner in the main window of Awesome Miner, go to the toolbar: Tools -> API Report. This will help me to figure out why the hashrate is reported incorrectly. Thanks!
Thanks I will email you later with this info. Glad to hear that a trial is available.
January 25, 2017, 11:24:26 AM
Is there any way to display temps in Fahrenheit?
That is not supported today. It's a good request, so I will consider it for the future versions of the software. January 25, 2017, 11:23:11 AM
Can Awesome miner manage the Antminer L3 Scrypt miner? Also does AM support Claymore XMR miner? I downloaded the free trial of AM, but finding it is too limited to know if this is going to work for me. You should offer a 30 day trial license of the licensed products so that we can try it to see if it is going to work.
I am interested in figuring out how to manage the L3's and how to setup profit switching in this software to mange both GPU rigs and scrypt ASIC miners. If you can recommend a tutorial on how to do this that would be great. Thanks.
Update: I tried adding an L3 to the demo copy and it reports the hash rate as 250GH instead of MH. So I don't know if it is something I set incorrectly or there is something that needs to be tweaked in AM.
Claymore XMR miner is not supported today, but will be added. Please contact me by e-mail (you will find the address in the about box of the software), and we can discuss a trial license - it's fully possible.I am interested in figuring out how to manage the L3's and how to setup profit switching in this software to mange both GPU rigs and scrypt ASIC miners. If you can recommend a tutorial on how to do this that would be great. Thanks.
Update: I tried adding an L3 to the demo copy and it reports the hash rate as 250GH instead of MH. So I don't know if it is something I set incorrectly or there is something that needs to be tweaked in AM.
The general concepts of profit switching in Awesome Miner can be found here:
http://awesomeminer.com/guide/awesomeprofit.aspx
Could you send me an API report for the L3 Scrypt Miner? Select the miner in the main window of Awesome Miner, go to the toolbar: Tools -> API Report. This will help me to figure out why the hashrate is reported incorrectly. Thanks!
January 25, 2017, 07:20:28 AM
Is there any way to display temps in Fahrenheit?
January 22, 2017, 02:28:10 PM
Can Awesome miner manage the Antminer L3 Scrypt miner? Also does AM support Claymore XMR miner? I downloaded the free trial of AM, but finding it is too limited to know if this is going to work for me. You should offer a 30 day trial license of the licensed products so that we can try it to see if it is going to work.
I am interested in figuring out how to manage the L3's and how to setup profit switching in this software to mange both GPU rigs and scrypt ASIC miners. If you can recommend a tutorial on how to do this that would be great. Thanks.
Update: I tried adding an L3 to the demo copy and it reports the hash rate as 250GH instead of MH. So I don't know if it is something I set incorrectly or there is something that needs to be tweaked in AM.
I am interested in figuring out how to manage the L3's and how to setup profit switching in this software to mange both GPU rigs and scrypt ASIC miners. If you can recommend a tutorial on how to do this that would be great. Thanks.
Update: I tried adding an L3 to the demo copy and it reports the hash rate as 250GH instead of MH. So I don't know if it is something I set incorrectly or there is something that needs to be tweaked in AM.
January 20, 2017, 02:18:39 PM
Can i share API ports with Awesome miner ? .
Are you refering to the cgminer/sgminer API port that Awesome Miner connect to for statistics, and you want to connect another application to the same cgminer/sgminer API port? Then Yes. January 19, 2017, 11:45:26 PM
Can i share API ports with Awesome miner ? .
January 16, 2017, 02:33:29 PM
Will this work with Nvida and ccminer? Thx
Yes, with ccminer sp-mod. January 16, 2017, 02:32:55 PM
imported to sgminer-gm exe name is different but has all the sgminer-gm stuff ,
https://bitcointalksearch.org/topic/m.17498340
IF it's cool and ok with you would you add it to awesome please !!! ......
Have you tried to use it with Awesome Miner? Set Sgminer-gm as miner type and point to another exe-file to be started. https://bitcointalksearch.org/topic/m.17498340
IF it's cool and ok with you would you add it to awesome please !!! ......
January 16, 2017, 04:58:05 AM
Will this work with Nvida and ccminer? Thx
January 14, 2017, 01:28:55 AM
new ZEc miner
imported to sgminer-gm exe name is different but has all the sgminer-gm stuff ,
https://bitcointalksearch.org/topic/m.17498340
IF it's cool and ok with you would you add it to awesome please !!! ......
imported to sgminer-gm exe name is different but has all the sgminer-gm stuff ,
https://bitcointalksearch.org/topic/m.17498340
IF it's cool and ok with you would you add it to awesome please !!! ......
January 14, 2017, 12:27:02 AM
is this version still available? i have s7 and s9 with bmminer v1. i really like to make a scheduled fan percent change everyday. is it doable with awesome miner?
i tried this, t does'nt work. hehe..
help?...
Chaning fan speed is not supported by Awesome Miner. There was an attempt to implement this some time ago, but it never worked very well because of how the Antminer configuration works. So unfortunately, I don't know any way of setting the fan speed.i tried this, t does'nt work. hehe..
help?...
If you figure out how to make that configuration over SSH by manually modifying the Antminer configuration file (/config/bmminer.conf), please let me know and I can add support for it in Awesome Miner.
I know fan percent and frequency cannot be changed with the new BMminer v2.
But I'm just using S7 and S9 with BMminer V1.
I tried adding these lines
"bitmain-fan-ctrl" : true,
"bitmain-fan-pwm" : "87"
}
in cgminer.conf via ssh then used awesome miner to restart cgminer without rebooting. It worked, That's on an Antminer S7...
will try on S9 BMminer v1 later.
edit: also works with my 11.85TH S9 with BMminer V1.
can I have the version that has fan control to try?.. I want to be able to schedule fan speed.
January 13, 2017, 02:29:55 AM
Suggestion :New feather i would even pay for a new level a more improved profit mining that can auto sell and auto exchange to the most profitable exchanges at the time, I made the same suggestion in another thread that just started that has a really cool web site . I would pay a separate cost for a add-on type thing in awesome or level with a very low maintenance fee for may be 3 months at time as a incentive to keep it going , i think month to month would be to much work on the fee part .... to keep collecting it every month .. I'm no good at coding so no way i could do it.
just a Suggestion i don't expect it to happen nor would i demand it ...
My Crypto Buddy
http://www.mycryptobuddy.com/
https://bitcointalksearch.org/topic/mycryptobuddycom-sleek-web-utility-helping-gpu-miners-maximize-profits-1747750
just a Suggestion i don't expect it to happen nor would i demand it ...
My Crypto Buddy
http://www.mycryptobuddy.com/
https://bitcointalksearch.org/topic/mycryptobuddycom-sleek-web-utility-helping-gpu-miners-maximize-profits-1747750
Jump to: