hahha
so nice
free heating from the chilli
Topic: BFL board project COINTAMINATION - EU facility - ORDERS OPENED for Chili - page 28. (Read 73149 times)
October 23, 2013, 03:52:07 AM
October 23, 2013, 03:47:36 AM
If its down to 250w
then we need the most heat extraction we can get.
I was planning to turn "off" my central heating this winter, but now?...........
then we need the most heat extraction we can get.
I was planning to turn "off" my central heating this winter, but now?...........
October 23, 2013, 03:42:12 AM
hahahah
maybe we make a car
and not a miner
maybe we make a car
and not a miner
October 23, 2013, 03:28:49 AM
Jesus thats like for an oil pump
October 22, 2013, 05:23:26 PM
Well... hard to say... We did ask him not to trash it and we will check it... But he never got around to it... So hard to say... If he didn't load firmware on it might even not be toasted... It could even happen that it has good chips on it... Luke-Jr did have a lot of them but cooler was not put on properly so you can guess what happened... I did even post that on forum that he didn't do it right but he didn't fix it...
One thing I dont sure is that if this thing uses more than 300W power Why are you putting a simple CPU cooler on it? Isn't this gonna destroy the chips?That black cooler works if it is on properly... It was problem that all chips didn't touch heatsink...
October 22, 2013, 04:35:15 PM
Well... hard to say... We did ask him not to trash it and we will check it... But he never got around to it... So hard to say... If he didn't load firmware on it might even not be toasted... It could even happen that it has good chips on it... Luke-Jr did have a lot of them but cooler was not put on properly so you can guess what happened... I did even post that on forum that he didn't do it right but he didn't fix it...
One thing I dont sure is that if this thing uses more than 300W power Why are you putting a simple CPU cooler on it? Isn't this gonna destroy the chips? 
October 22, 2013, 03:15:02 PM
Tom (JJ) has mailed a check with tracking # to reimburse me so now I can pay Lucko directly for assembly.
Tom explained that he invested a lot of his own money in this project and had no intention of scamming anyone.
Tom explained that he invested a lot of his own money in this project and had no intention of scamming anyone.
October 22, 2013, 02:21:25 PM
Well... hard to say... We did ask him not to trash it and we will check it... But he never got around to it... So hard to say... If he didn't load firmware on it might even not be toasted... It could even happen that it has good chips on it... Luke-Jr did have a lot of them but cooler was not put on properly so you can guess what happened... I did even post that on forum that he didn't do it right but he didn't fix it...
October 22, 2013, 01:52:19 PM
Yes everything is fine I'm just working really long days... And then when I finish some family time till my daughter goes to sleep and then board work...
Now I might say a word or two about JJ thing. I don't think he was there to scam anyone. I'm sure he was just doing the best he could but not have enough knowledge and back out. He only took dwdoc order as far as I know and he did send him a check to repay him. He lost confidence in himself being able to make this work when he destroyed one board without cooling and chips on the other two boards turned out dead...
Now form and JJ have a same friend that is a hero member so we assumed that hi is OK. I still think he just got over his head and nothing else. Now I really don't know what was bASIC and what happened so I can't say nothing about that...
Now I might say a word or two about JJ thing. I don't think he was there to scam anyone. I'm sure he was just doing the best he could but not have enough knowledge and back out. He only took dwdoc order as far as I know and he did send him a check to repay him. He lost confidence in himself being able to make this work when he destroyed one board without cooling and chips on the other two boards turned out dead...
Now form and JJ have a same friend that is a hero member so we assumed that hi is OK. I still think he just got over his head and nothing else. Now I really don't know what was bASIC and what happened so I can't say nothing about that...
Thank you Lucko for your post.
One question:- did he destroy the board or was it also part of the poor samples and he only thinks he toasted it?
October 22, 2013, 01:42:18 PM
Yes everything is fine I'm just working really long days... And then when I finish some family time till my daughter goes to sleep and then board work...
Now I might say a word or two about JJ thing. I don't think he was there to scam anyone. I'm sure he was just doing the best he could but not have enough knowledge and back out. He only took dwdoc order as far as I know and he did send him a check to repay him. He lost confidence in himself being able to make this work when he destroyed one board without cooling and chips on the other two boards turned out dead...
Now form and JJ have a same friend that is a hero member so we assumed that hi is OK. I still think he just got over his head and nothing else. Now I really don't know what was bASIC and what happened so I can't say nothing about that...
Now I might say a word or two about JJ thing. I don't think he was there to scam anyone. I'm sure he was just doing the best he could but not have enough knowledge and back out. He only took dwdoc order as far as I know and he did send him a check to repay him. He lost confidence in himself being able to make this work when he destroyed one board without cooling and chips on the other two boards turned out dead...
Now form and JJ have a same friend that is a hero member so we assumed that hi is OK. I still think he just got over his head and nothing else. Now I really don't know what was bASIC and what happened so I can't say nothing about that...
October 22, 2013, 12:09:35 PM
Condolences dwdoc. That really sucks. It's times like that you really wish you had an uncle Vini.
October 22, 2013, 10:19:41 AM
I just wanted to post here as a warning to anyone looking to buy a Cointamination board in the US to be sure to go to Lucko and not to purchase anything through JerimiahJohnson.
JerimiahJohnson is in fact Thomas Van Riper, who went by cablepair here. He's scammer tagged and still owes bASIC customers very large sums of money. As someone who had orders for bASIC products on order with him, I would not trust him with a dime. Go directly to Lucko.
JerimiahJohnson is in fact Thomas Van Riper, who went by cablepair here. He's scammer tagged and still owes bASIC customers very large sums of money. As someone who had orders for bASIC products on order with him, I would not trust him with a dime. Go directly to Lucko.
Really? He introduced himself as "Rob" in my PMs and emails.
+1 for Lucko.
The bASIC scandal occurred before I joined the forum so I can't speak to that. Also JerimiahJohnson has already announced he is not currently accepting payment for board assembly.
However, I sent my 97 chips to JerimiahJohnson's assembly house in Oregon on 9/19/13 and paid him $3600. After waiting a month with no board assembly due to technical difficulties I called the assembly house and was told the chips and PCB's had been sent to Thomas Van Riper, St. Regis Falls, NY.
I know Lucko is frustrated about the way things turned out and is trying to fix things.
Yeah sorry to hear that dwdoc. Hey Lucko is everything okay? Is there anything we should know about?
October 22, 2013, 01:43:29 AM
Wow creepy
October 21, 2013, 09:42:21 PM
I just wanted to post here as a warning to anyone looking to buy a Cointamination board in the US to be sure to go to Lucko and not to purchase anything through JerimiahJohnson.
JerimiahJohnson is in fact Thomas Van Riper, who went by cablepair here. He's scammer tagged and still owes bASIC customers very large sums of money. As someone who had orders for bASIC products on order with him, I would not trust him with a dime. Go directly to Lucko.
JerimiahJohnson is in fact Thomas Van Riper, who went by cablepair here. He's scammer tagged and still owes bASIC customers very large sums of money. As someone who had orders for bASIC products on order with him, I would not trust him with a dime. Go directly to Lucko.
Really? He introduced himself as "Rob" in my PMs and emails.
+1 for Lucko.
The bASIC scandal occurred before I joined the forum so I can't speak to that. Also JerimiahJohnson has already announced he is not currently accepting payment for board assembly.
However, I sent my 97 chips to JerimiahJohnson's assembly house in Oregon on 9/19/13 and paid him $3600. After waiting a month with no board assembly due to technical difficulties I called the assembly house and was told the chips and PCB's had been sent to Thomas Van Riper, St. Regis Falls, NY.
I know Lucko is frustrated about the way things turned out and is trying to fix things.
October 21, 2013, 07:31:54 PM
I just wanted to post here as a warning to anyone looking to buy a Cointamination board in the US to be sure to go to Lucko and not to purchase anything through JerimiahJohnson.
JerimiahJohnson is in fact Thomas Van Riper, who went by cablepair here. He's scammer tagged and still owes bASIC customers very large sums of money. As someone who had orders for bASIC products on order with him, I would not trust him with a dime. Go directly to Lucko.
JerimiahJohnson is in fact Thomas Van Riper, who went by cablepair here. He's scammer tagged and still owes bASIC customers very large sums of money. As someone who had orders for bASIC products on order with him, I would not trust him with a dime. Go directly to Lucko.
October 20, 2013, 04:07:54 PM
I have 4 chips for sell lucko
Batch 2
Batch 2
October 20, 2013, 04:00:13 PM
Might be interested in Buying some chips.
Please PM IF selling...
Please PM IF selling...
October 20, 2013, 11:43:32 AM
Side, top, under angle, it does not matter. I'll not be putting them in cases or look at them. Red, greed or any other color LED are fine.
All it matters is that they hash, and don't catch fire.
All it matters is that they hash, and don't catch fire.
I'll place the parts in a server room. It is essential to mount them in a related case.
Cheers...
October 20, 2013, 11:41:50 AM
+1 ... I don't like cables to side as well, they are almost every time in the way when getting board into cases. Same goes for the USB cable on the board.
@asjfdlksfd Do you have special designed case? I would be interested.
No, not yet. I would like a Server case for ATX-E boards. One which I've bought in the past have tree 12 or 14cm fans (must check it again) which blows from front to back.@asjfdlksfd Do you have special designed case? I would be interested.
In Front left and right are normally the drives installed. Maybe up to 6 boards can be fittet, but I will check them first I got the pcb sample from lucko (one of the reason why I want to get a board from you)
The other part I've found is the usb port should also be pluggable from top. So dependend on the space I can replace them.
Cheers...
October 20, 2013, 08:23:03 AM
And I ordered by mistake wrong PCI-e plug... So it is not plugged in from side but from top
Ah you can put them on my boards. I don't want side usage normally too for the trimmers. The reason is I want as many as possible in a 4HE 19" Serverrack to put them to a air conditioned server room and top connections will help. So I want to have so less space as possible between much boards.
@asjfdlksfd Do you have special designed case? I would be interested.
Cheers
one4many
Jump to: