bitHopper: Python Pool Hopper Proxy - page 96.

EskimoBob

legendary

Activity: 910

Merit: 1000

Quality Printing Services by Federal Reserve Bank

Quote from: bitcoindaddy on August 03, 2011, 10:25:50 AM

Quote from: rampone on August 03, 2011, 10:24:18 AM

Also have the btcpool24 error, updated right now from i think the 6th or 7th oldest commit.

right now it went from full difficulty shares to zero shares, and surprise its the right value now (103663 shares)

mmmh, role: mine Wink

anyone a hoppersden invite, this thread is becoming spookingly BIG Wink

For me it was cause by a case mismatch between user.cfg and pools.cfg, specifically BTCPool24 vs. btcpool24. The name must have been changed recently. A subtle problem that was staring me in the face.

Thanx bitcoindaddy. Works now.
Because bithopper switches on even the slightest delay from the pools web server, it keeps hopping away.

muyoso

member

Activity: 84

Merit: 10

IDK if the slicer is working correctly. Just tried it again with bitclockers at 42% and polmine at around 38% and it would not switch off of bitclockers.

rampone

sr. member

Activity: 339

Merit: 250

dafq is goin on

Quote from: paraipan on August 03, 2011, 10:32:17 AM

what's up with these guys ? Huh

(http://btcworld.de/)

dunno, cant rememeber how much shares i laid in, was only 14 at the site (i think i did not ine a lot with them yet)

C00w: newest commit seems still to hang up and not accept new connections after hopping fastly.

Also the pools start to turn red really quick with me (therefore the fast hopping). Is "lag"detection really aggressive right now?

paraipan

legendary

Activity: 924

Merit: 1004

Firstbits: 1pirata

what's up with these guys ? Huh

(http://btcworld.de/)

bitcoindaddy

hero member

Activity: 481

Merit: 500

Quote from: rampone on August 03, 2011, 10:24:18 AM

Also have the btcpool24 error, updated right now from i think the 6th or 7th oldest commit.

right now it went from full difficulty shares to zero shares, and surprise its the right value now (103663 shares)

mmmh, role: mine Wink

anyone a hoppersden invite, this thread is becoming spookingly BIG Wink

For me it was cause by a case mismatch between user.cfg and pools.cfg, specifically BTCPool24 vs. btcpool24. The name must have been changed recently. A subtle problem that was staring me in the face.

rampone

sr. member

Activity: 339

Merit: 250

dafq is goin on

Also have a btcpool24 error, but not the api error. after restart it stays at 100%.
updated right now from i think the 6th or 7th oldest commit to the newest.

c00w and all other developers: u r faboulous Wink

right now it went from full difficulty shares to zero shares, and surprise its the right value now (103663 shares)

mmmh, role: mine Wink

anyone a hoppersden invite for the sickstarr in me Wink

, this thread is becoming spookingly BIG Wink

EskimoBob

legendary

Activity: 910

Merit: 1000

Quality Printing Services by Federal Reserve Bank

Quote from: bitcoindaddy on August 03, 2011, 09:50:17 AM

Quote from: paraipan on August 03, 2011, 09:47:57 AM

Quote from: bitcoindaddy on August 03, 2011, 09:23:00 AM

Anyone know why BTCPool24 json isn't working? The page looks correct and so does the pools.cfg config. I'm on the latest version.

Error in pool api for BTCPool24

sometimes a pool just lags for brief moment, remember you connect to pools located in various geographical areas

Well it's been like that for a couple days. And it doesn't lag when you look at it in the browser.

Same problem here Sad

bitcoindaddy

hero member

Activity: 481

Merit: 500

Quote from: paraipan on August 03, 2011, 10:07:04 AM

Quote from: bitcoindaddy on August 03, 2011, 09:59:38 AM

Quote from: paraipan on August 03, 2011, 09:58:07 AM

Quote from: bitcoindaddy on August 03, 2011, 09:50:17 AM

Quote from: paraipan on August 03, 2011, 09:47:57 AM

Quote from: bitcoindaddy on August 03, 2011, 09:23:00 AM

Anyone know why BTCPool24 json isn't working? The page looks correct and so does the pools.cfg config. I'm on the latest version.

Error in pool api for BTCPool24

sometimes a pool just lags for brief moment, remember you connect to pools located in various geographical areas

Well it's been like that for a couple days. And it doesn't lag when you look at it in the browser.

working fine here

Code:

[16:56:32] RPC request [c082b000] submitted to polmine.pl
[16:56:32] nofeemining: 3958709
[16:56:34] btcpool24: 95044
[16:56:47] triple: 1692301
[16:56:49] RPC request [getwork] submitted to polmine.pl
[16:56:51] slush: 82141

Are you using the latest master from c00w?

yes I do (ver. a4fbacd), although it doesn't matter much to your problem, right now c00w is working on LP

edit: just had a lag error with them like yours, now is back up, but this tells me 1. they lack the internet connection to support high traffic or 2. my route over the internet to their server sucks and is not a good option to mine with them. Is only my case, for another person could work fine and lag some other pool that works fine with me.

Someone else was complaining earlier about the same thing.

It's odd, it seems to work just fine when I do:

Code:

curl http://www.btcpool24.com/json_stats.php
{"poolname":"BTCPool24","time":"03-08-11 17:13","hashrate":"30078","worker":"52","blocks_found":"1","round_started":"2011-08-03 13:30:23","round_duration_sec":13382,"shares_this_round":102092}

rampone

sr. member

Activity: 339

Merit: 250

dafq is goin on

Quote from: Sukrim on August 03, 2011, 07:03:48 AM

I could try to offer the builds through bitTorrent though, but I doubt that there would be many seeders and I don't want to upload all day long. If someone wants to donate an FTP or something else where I could upload builds to, this might also work.

Sukrim, if you put up a torrent, i will seed it from my student dorm Wink

should be enough 4 everyone.

paraipan

legendary

Activity: 924

Merit: 1004

Firstbits: 1pirata

Quote from: bitcoindaddy on August 03, 2011, 09:59:38 AM

Quote from: paraipan on August 03, 2011, 09:58:07 AM

Quote from: bitcoindaddy on August 03, 2011, 09:50:17 AM

Quote from: paraipan on August 03, 2011, 09:47:57 AM

Quote from: bitcoindaddy on August 03, 2011, 09:23:00 AM

Anyone know why BTCPool24 json isn't working? The page looks correct and so does the pools.cfg config. I'm on the latest version.

Error in pool api for BTCPool24

sometimes a pool just lags for brief moment, remember you connect to pools located in various geographical areas

Well it's been like that for a couple days. And it doesn't lag when you look at it in the browser.

working fine here

Code:

[16:56:32] RPC request [c082b000] submitted to polmine.pl
[16:56:32] nofeemining: 3958709
[16:56:34] btcpool24: 95044
[16:56:47] triple: 1692301
[16:56:49] RPC request [getwork] submitted to polmine.pl
[16:56:51] slush: 82141

Are you using the latest master from c00w?

yes I do (ver. a4fbacd), although it doesn't matter much to your problem, right now c00w is working on LP

edit: just had a lag error with them like yours, now is back up, but this tells me 1. they lack the internet connection to support high traffic or 2. my route over the internet to their server sucks and is not a good option to mine with them. Is only my case, for another person could work fine and lag some other pool that works fine with me.

bitcoindaddy

hero member

Activity: 481

Merit: 500

Quote from: paraipan on August 03, 2011, 09:58:07 AM

Quote from: bitcoindaddy on August 03, 2011, 09:50:17 AM

Quote from: paraipan on August 03, 2011, 09:47:57 AM

Quote from: bitcoindaddy on August 03, 2011, 09:23:00 AM

Anyone know why BTCPool24 json isn't working? The page looks correct and so does the pools.cfg config. I'm on the latest version.

Error in pool api for BTCPool24

sometimes a pool just lags for brief moment, remember you connect to pools located in various geographical areas

Well it's been like that for a couple days. And it doesn't lag when you look at it in the browser.

working fine here

Code:

[16:56:32] RPC request [c082b000] submitted to polmine.pl
[16:56:32] nofeemining: 3958709
[16:56:34] btcpool24: 95044
[16:56:47] triple: 1692301
[16:56:49] RPC request [getwork] submitted to polmine.pl
[16:56:51] slush: 82141

Are you using the latest master from c00w?

paraipan

legendary

Activity: 924

Merit: 1004

Firstbits: 1pirata

Quote from: bitcoindaddy on August 03, 2011, 09:50:17 AM

Quote from: paraipan on August 03, 2011, 09:47:57 AM

Quote from: bitcoindaddy on August 03, 2011, 09:23:00 AM

Anyone know why BTCPool24 json isn't working? The page looks correct and so does the pools.cfg config. I'm on the latest version.

Error in pool api for BTCPool24

sometimes a pool just lags for brief moment, remember you connect to pools located in various geographical areas

Well it's been like that for a couple days. And it doesn't lag when you look at it in the browser.

working fine here
edit: the twisted client that's used by bH isn't a browser so if the page lags just a brief moment more than usual it just throws an error an moves on. Sticking with the pool's that give you best results and fewer errors would be the goal here

Code:

[16:56:32] RPC request [c082b000] submitted to polmine.pl
[16:56:32] nofeemining: 3958709
[16:56:34] btcpool24: 95044
[16:56:47] triple: 1692301
[16:56:49] RPC request [getwork] submitted to polmine.pl
[16:56:51] slush: 82141

bitcoindaddy

hero member

Activity: 481

Merit: 500

Quote from: paraipan on August 03, 2011, 09:47:57 AM

Quote from: bitcoindaddy on August 03, 2011, 09:23:00 AM

Anyone know why BTCPool24 json isn't working? The page looks correct and so does the pools.cfg config. I'm on the latest version.

Error in pool api for BTCPool24

sometimes a pool just lags for brief moment, remember you connect to pools located in various geographical areas

Well it's been like that for a couple days. And it doesn't lag when you look at it in the browser.

paraipan

legendary

Activity: 924

Merit: 1004

Firstbits: 1pirata

Quote from: bitcoindaddy on August 03, 2011, 09:23:00 AM

Anyone know why BTCPool24 json isn't working? The page looks correct and so does the pools.cfg config. I'm on the latest version.

Error in pool api for BTCPool24

sometimes a pool just lags for brief moment, remember you connect to pools located in various geographical areas

bitcoindaddy

hero member

Activity: 481

Merit: 500

Anyone know why BTCPool24 json isn't working? The page looks correct and so does the pools.cfg config. I'm on the latest version.

Error in pool api for BTCPool24

paraipan

legendary

Activity: 924

Merit: 1004

Firstbits: 1pirata

Quote from: zybron on August 03, 2011, 09:00:35 AM

Quote from: muyoso on August 03, 2011, 08:45:23 AM

I dont understand the slicer. There are 3 minable pools right now for me, bitclockers, mtred and polmine. Polmine has the least number of shares and the slicer refuses to jump to it. It just continues switching between mtred and bitclockers.

Pretty sure something's not right. I only have two available (haven't enabled bitclockers) and mine refuses to mine anywhere but mtred. Maybe something where it should be parsing through (in my case) up to 2 available pools but is only actually parsing 1?

same here only mine is locked on polmine, didn't see any mtred getwork

edit: working nice with phoenix, phatk kern (freaked out a bit after seeing all that errors with other miners)

edit2: now were talking, I see now why is called time slicing, 5 minutes slice on every hoppable pool

zybron

member

Activity: 66

Merit: 10

Quote from: muyoso on August 03, 2011, 08:45:23 AM

I dont understand the slicer. There are 3 minable pools right now for me, bitclockers, mtred and polmine. Polmine has the least number of shares and the slicer refuses to jump to it. It just continues switching between mtred and bitclockers.

Pretty sure something's not right. I only have two available (haven't enabled bitclockers) and mine refuses to mine anywhere but mtred. Maybe something where it should be parsing through (in my case) up to 2 available pools but is only actually parsing 1?

muyoso

member

Activity: 84

Merit: 10

I dont understand the slicer. There are 3 minable pools right now for me, bitclockers, mtred and polmine. Polmine has the least number of shares and the slicer refuses to jump to it. It just continues switching between mtred and bitclockers.

Keninishna

hero member

Activity: 556

Merit: 500

Quote from: Sukrim on August 03, 2011, 07:03:48 AM

Here's a current build, still emptying my Wuala account (I was a bit over quota (~a 100GB "bit") so I have to download + delete some stuff to be able to reupload again).

I could try to offer the builds through bitTorrent though, but I doubt that there would be many seeders and I don't want to upload all day long. If someone wants to donate an FTP or something else where I could upload builds to, this might also work.

Anyways, here's the latest revision on Rapidshare: https://rapidshare.com/files/1628022709/bitHopper-2011-08-03_11-57-49-a4fbacd3fe2f8d6930912aab341c01a634edf11e.7z

You can use my server http://gamerchicks.org/sukrim/bitHopper-2011-08-03_11-57-49-a4fbacd3fe2f8d6930912aab341c01a634edf11e.7z

I have set you up a ssh account I will msg you the login info. Just scp files to /var/www/sukrim

Sukrim

legendary

Activity: 2618

Merit: 1007

Here's a current build, still emptying my Wuala account (I was a bit over quota (~a 100GB "bit") so I have to download + delete some stuff to be able to reupload again).

I could try to offer the builds through bitTorrent though, but I doubt that there would be many seeders and I don't want to upload all day long. If someone wants to donate an FTP or something else where I could upload builds to, this might also work.

Anyways, here's the latest revision on Rapidshare: https://rapidshare.com/files/1628022709/bitHopper-2011-08-03_11-57-49-a4fbacd3fe2f8d6930912aab341c01a634edf11e.7z

Topic: bitHopper: Python Pool Hopper Proxy - page 96. (Read 355813 times)