Topic: bitHopper: Python Pool Hopper Proxy - page 93. (Read 355689 times)
So for some reason it likes to get stuck on BTCPool24.
Put back my old back-up and see what the morning brings...
It's 0:27 over here... Bed time... See you later! I hop(e) to get my 7:30 hours of sleep
It's 0:27 over here... Bed time... See you later! I hop(e) to get my 7:30 hours of sleep
Quote
Ok after finally figuring out how to use gitHub I uploaded my changes and made a pull request. For anyone who wants to check it out go here https://github.com/gtrrkicw/bitHopper
edit: This scheduler will hop between pools that are <43% every 10 minutes in a round robin. Not sure if that was the intention or not but it seems logical to me.
edit: This scheduler will hop between pools that are <43% every 10 minutes in a round robin. Not sure if that was the intention or not but it seems logical to me.
this is working for me..it appears to jump every 10 minutes to a proper pool.
Just fired up your new one c00w and well let ya know what i see.
how often is it supposed to hope so I can get an idea of when to look?
right now it seems to have been at BTCpool24 for 4 minutes so far
edit: 11 minutes BTCpool24
mine stuck with polmine and putting it on info or disable doesn't seem to matter
Running on the back-up now... Wait for the next c00w update
mine stuck with polmine and putting it on info or disable doesn't seem to matter
edit: where is macboy80 ? I'm gonna give him a chat, he f.. up a little bit the stats page, the colors look nice but has lost functionality, grr
edit2: I retry that, sorry macboy, it's the scheduler, without it enabled changing roles in stats page works like charm, this time I freaked out
edit: where is macboy80 ? I'm gonna give him a chat, he f.. up a little bit the stats page, the colors look nice but has lost functionality, grr
edit2: I retry that, sorry macboy, it's the scheduler, without it enabled changing roles in stats page works like charm, this time I freaked out
This should swap between all mine able pools evenly spending time on each of them.
If none are mineable then it swaps to a backup.
If none are mineable then it swaps to a backup.
Only default and slice do anything. The others are placeholders.
And I think I fixed slice. Again.
And I think I fixed slice. Again.
Only been running for a few minutes, but it SEEMS to be working.
Edit: Actually, before I say if its working or not, what is it SUPPOSED to do? I have 3 pools under 43% right now. Should it just jump through all 3 pools? If so, is there a set time period? What triggers the hop?
Yes, this would be good to know. Mine seems to be stuck on BTCPool24 again.
Mine is stuck on polmine.pl for 18 minutes now
Do you have BTCPool24 enabled as a miner? Technically mine should be on bitcoins. Lc now.
Nope, still have the API_disable error when enabling BTCPool24, but if it works for you, I must have done something wrong in the config?
Only default and slice do anything. The others are placeholders.
And I think I fixed slice. Again.
And I think I fixed slice. Again.
Only been running for a few minutes, but it SEEMS to be working.
Edit: Actually, before I say if its working or not, what is it SUPPOSED to do? I have 3 pools under 43% right now. Should it just jump through all 3 pools? If so, is there a set time period? What triggers the hop?
Yes, this would be good to know. Mine seems to be stuck on BTCPool24 again.
Mine is stuck on polmine.pl for 18 minutes now
Do you have BTCPool24 enabled as a miner? Technically mine should be on bitcoins. Lc now.
Only default and slice do anything. The others are placeholders.
And I think I fixed slice. Again.
And I think I fixed slice. Again.
Only been running for a few minutes, but it SEEMS to be working.
Edit: Actually, before I say if its working or not, what is it SUPPOSED to do? I have 3 pools under 43% right now. Should it just jump through all 3 pools? If so, is there a set time period? What triggers the hop?
Yes, this would be good to know. Mine seems to be stuck on BTCPool24 again.
Mine is stuck on polmine.pl for 18 minutes now
Only default and slice do anything. The others are placeholders.
And I think I fixed slice. Again.
And I think I fixed slice. Again.
Only been running for a few minutes, but it SEEMS to be working.
Edit: Actually, before I say if its working or not, what is it SUPPOSED to do? I have 3 pools under 43% right now. Should it just jump through all 3 pools? If so, is there a set time period? What triggers the hop?
Yes, this would be good to know. Mine seems to be stuck on BTCPool24 again.
Now that I think about it a little more, maybe a better approach than spending the same amount of time on each pool in a round robin would be a decaying amount of time based on the completion percentage. Or at least a preemptive approach where we switch right away to a pool that has just completed a block in order to mine during those juicy first couple of percentage points. Comments?
Only default and slice do anything. The others are placeholders.
And I think I fixed slice. Again.
And I think I fixed slice. Again.
Only been running for a few minutes, but it SEEMS to be working.
Edit: Actually, before I say if its working or not, what is it SUPPOSED to do? I have 3 pools under 43% right now. Should it just jump through all 3 pools? If so, is there a set time period? What triggers the hop?
Quote
hey, seems like ozco covered their windows so we cannot see in, they have 110 hours from last block so the probabilities are high. I suppose they want to make sure were not counted in the next round
edit: I would be more than happy to donate 1% if pool ops. quit doing tricks with stats
edit: I would be more than happy to donate 1% if pool ops. quit doing tricks with stats
all their other stats seem to be updating.. so IDK.. I do know they had a problem with their system july30th.. maybe they broke something fixing it. Nothing in the forums about hoppers or protection.
BUT He is thinking of
Quote
Working out the details of some Donor "incentives" back soon with more details
maybe we can suggest one or two incentives
Only default and slice do anything. The others are placeholders.
And I think I fixed slice. Again.
And I think I fixed slice. Again.
And I'm testing, again
I've been on BTCPool24 for a while now and it still says they're at 0.48%. Is that right?
Hmm. I shut down, updated and restarted bitHopper and now BTCPool24 has updated to 13%, but bitHopper is mining at bloodys which is 27%.
This is all very confusing.
EDIT : ok it's switched.
eeehh, If you know some method to find out if it will be a long or short round share it please, it would be a great help to all of us 
hmmm I think
(hope)
you know what I mean
https://bitcointalksearch.org/topic/m.425249
Getting "SSL support is not present" error whilst trying to run this on LinuxCoin 0.2-final.
I've installed python-openssl and python-twisted.
Any ideas?
I've installed python-openssl and python-twisted.
Any ideas?
Ok after finally figuring out how to use gitHub I uploaded my changes and made a pull request. For anyone who wants to check it out go here https://github.com/gtrrkicw/bitHopper
edit: This scheduler will hop between pools that are <43% every 10 minutes in a round robin. Not sure if that was the intention or not but it seems logical to me.
edit: This scheduler will hop between pools that are <43% every 10 minutes in a round robin. Not sure if that was the intention or not but it seems logical to me.
I've been on BTCPool24 for a while now and it still says they're at 0.48%. Is that right?
Only default and slice do anything. The others are placeholders.
And I think I fixed slice. Again.
And I think I fixed slice. Again.
Jump to: