Topic: Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order - page 253. (Read 531298 times)
August 23, 2016, 11:53:10 AM
Did you all get the email about bitmain now accepting paypal on everything except S9's? Interesting...
August 23, 2016, 10:40:02 AM
Yes please do get the picture:). Be interested to see if it's the same board you sent in. Should be easy enough to tell for as shitty as these seem to be put together. Ie the heat sinks look like a kid put them on and if it's the case of human putting them on they will all be different. Please get the pic
BR
Edit it should be mandatory to open and inspect the miner prior to use. If the heat sinks aren't aligned properly you will have overheating but only on a few chips. Those chips burn up and bitmain Doesn't have to honor warranty. What a shit!
BR
Edit it should be mandatory to open and inspect the miner prior to use. If the heat sinks aren't aligned properly you will have overheating but only on a few chips. Those chips burn up and bitmain Doesn't have to honor warranty. What a shit!
August 23, 2016, 10:04:13 AM
Customer Service-Overseas Today at 14:30
Dear customer,
Your hash board was damaged physically before we received it. It may happened in transit.
If you need the picture of the hash board, I can send it to you.
Yours respectfully,
Quentin
Make sure I understand this correctly...
Is Bitmain the one who sent this message to you today regarding a board you sent to them?
If so, what good is a picture going to do for you?
He should get the picture.
August 23, 2016, 10:01:20 AM
I searched but there are sooo many pages
What are the temp limits ?
What are the temp limits ?
August 23, 2016, 09:26:39 AM
I just got my new 2xS9 batch 10
My Chip temps lay around 90-95 degress, could this be too high or is this normal ?
What would be the best zone ?
Thanks so much !
Perfectly normal. Search this thread for info as to what temp limits are. My Chip temps lay around 90-95 degress, could this be too high or is this normal ?
What would be the best zone ?
Thanks so much !
August 23, 2016, 09:20:27 AM
I just got my new 2xS9 batch 10
My Chip temps lay around 90-95 degress, could this be too high or is this normal ?
What would be the best zone ?
Thanks so much !
My Chip temps lay around 90-95 degress, could this be too high or is this normal ?
What would be the best zone ?
Thanks so much !
August 23, 2016, 09:12:09 AM
Anyone here read Chinese? If so, are those hand written symbols on Phil's bad board readable?
In particular it would be interesting to know the meaning of the symbol that looks like a 4 with a line through it.
In particular it would be interesting to know the meaning of the symbol that looks like a 4 with a line through it.
its "4" + a line, can't think of any Chinese word like this, the closest is 升/ 川/ 山。。。。。
there some marking on the little white sticker, but can' see clearly
looks to me like they simply crossed it out see full size
https://i.imgur.com/w06pfQc.jpg
Warm and fuzzy thought it may be a reject for 600m and dropped to 550m
zoom in looks like someone rub water over the sticker
August 23, 2016, 09:07:33 AM
Customer Service-Overseas Today at 14:30
Dear customer,
Your hash board was damaged physically before we received it. It may happened in transit.
If you need the picture of the hash board, I can send it to you.
Yours respectfully,
Quentin
Make sure I understand this correctly...
Is Bitmain the one who sent this message to you today regarding a board you sent to them?
If so, what good is a picture going to do for you?
August 23, 2016, 08:42:56 AM
Anyone here read Chinese? If so, are those hand written symbols on Phil's bad board readable?
In particular it would be interesting to know the meaning of the symbol that looks like a 4 with a line through it.
In particular it would be interesting to know the meaning of the symbol that looks like a 4 with a line through it.
its "4" + a line, can't think of any Chinese word like this, the closest is 升/ 川/ 山。。。。。
there some marking on the little white sticker, but can' see clearly
looks to me like they simply crossed it out see full size
https://i.imgur.com/w06pfQc.jpg
Warm and fuzzy thought it may be a reject for 600m and dropped to 550m
August 23, 2016, 08:20:46 AM
Anyone here read Chinese? If so, are those hand written symbols on Phil's bad board readable?
In particular it would be interesting to know the meaning of the symbol that looks like a 4 with a line through it.
In particular it would be interesting to know the meaning of the symbol that looks like a 4 with a line through it.
its "4" + a line, can't think of any Chinese word like this, the closest is 升/ 川/ 山。。。。。
there some marking on the little white sticker, but can' see clearly
August 23, 2016, 07:14:52 AM
ˇHi,TupsuThe following is your order of scrap equipment:03320160813070114259mCdrl8rX06EC
RepairDetail ID 03520160813070114279oxTnD8GD06AC
Name Hashboard S9(14T 650M)
Damage Causes PIN is lost in circuits board
What the hell does it mean ?
Damage Causes PIN is lost in circuits board
I have pictures taken before shipment.
Do not see anything that would be missing.
RepairDetail ID 03520160813070114279oxTnD8GD06AC
Name Hashboard S9(14T 650M)
Damage Causes PIN is lost in circuits board
What the hell does it mean ?
Damage Causes PIN is lost in circuits board
I have pictures taken before shipment.
Do not see anything that would be missing.
On the first picture some of the Pins to the 18 way data connector look poorly soldered, could that be it?
Rich
Customer Service-Overseas Today at 14:30
Dear customer,
Your hash board was damaged physically before we received it. It may happened in transit.
If you need the picture of the hash board, I can send it to you.
Yours respectfully,
Quentin
August 23, 2016, 06:59:35 AM
ˇHi,TupsuThe following is your order of scrap equipment:03320160813070114259mCdrl8rX06EC
RepairDetail ID 03520160813070114279oxTnD8GD06AC
Name Hashboard S9(14T 650M)
Damage Causes PIN is lost in circuits board
What the hell does it mean ?
Damage Causes PIN is lost in circuits board
I have pictures taken before shipment.
Do not see anything that would be missing.
RepairDetail ID 03520160813070114279oxTnD8GD06AC
Name Hashboard S9(14T 650M)
Damage Causes PIN is lost in circuits board
What the hell does it mean ?
Damage Causes PIN is lost in circuits board
I have pictures taken before shipment.
Do not see anything that would be missing.
On the first picture some of the Pins to the 18 way data connector look poorly soldered, could that be it?
Rich
August 23, 2016, 03:29:00 AM
ˇHi,TupsuThe following is your order of scrap equipment:03320160813070114259mCdrl8rX06EC
RepairDetail ID 03520160813070114279oxTnD8GD06AC
Name Hashboard S9(14T 650M)
Damage Causes PIN is lost in circuits board
What the hell does it mean ?
Damage Causes PIN is lost in circuits board
I have pictures taken before shipment.
Do not see anything that would be missing.
View original size - Click on the picture
View original size - Click on the picture
Link
http://nagi.ee/photos/photo_sizes.php?id=24747333&size=o
http://nagi.ee/photos/photo_sizes.php?id=24747331&size=o
RepairDetail ID 03520160813070114279oxTnD8GD06AC
Name Hashboard S9(14T 650M)
Damage Causes PIN is lost in circuits board
What the hell does it mean ?
Damage Causes PIN is lost in circuits board
I have pictures taken before shipment.
Do not see anything that would be missing.
View original size - Click on the picture
View original size - Click on the picture
Link
http://nagi.ee/photos/photo_sizes.php?id=24747333&size=o
http://nagi.ee/photos/photo_sizes.php?id=24747331&size=o
August 23, 2016, 03:12:15 AM
Direct dc is the current default supply in the industrial sector.(in india)
Ac is the current default in residential .(in india)
Also psu /ups and other equipment provide the conversion needed .
But a battery and solar power will cost more to setup and maintain than a just normal psu.
It's an interesting subject, but probably worth its own thread. (Hint: we're off topic here).
If there are examples of "home grown" DC setups running a miner, via topped up batteries? without current inversion, I'd be grateful if anyone could link to them.
August 23, 2016, 02:49:24 AM
Risking a smack, Bitmain's spec for the APW3-12-1600 PSU specifies output at
DC Voltage
12V
Rated Current
133A
Rated Power
1600W
If there is a DC supply capable of providing that, why can someone not just go DC/DC direct connection?
i.e. battery/solar power without the conversion to AC and back again to DC thru a PSU?
Just asking...
DC Voltage
12V
Rated Current
133A
Rated Power
1600W
If there is a DC supply capable of providing that, why can someone not just go DC/DC direct connection?
i.e. battery/solar power without the conversion to AC and back again to DC thru a PSU?
Just asking...
Direct dc is the current default supply in the industrial sector.(in india)
Ac is the current default in residential .(in india)
Also psu /ups and other equipment provide the conversion needed .
But a battery and solar power will cost more to setup and maintain than a just normal psu.
August 23, 2016, 02:48:18 AM
I thought this was a S9 thread
indeed it is just a power consumption discussion going on how much a s9 consumes a day.
August 22, 2016, 11:30:42 PM
Very sorry to hear about the DOA S9, fortunately, i haven't had any bad luck on the S9-B12 that i received today. Hope it gets resolved quickly...
it is 2/3 working so i am down say 450 usd unless they replace it.
as for lost password it is pointed at my pool
At the risk of getting even more OT...
I guess you're not using a proxy? If you were, then this would be less painful because you'd still be able to change the pool at the proxy level.
I've been using the Stratehm stratum-proxy on an RPi and am happy with it. Pointed my S9s at the proxy on a local IP and now I can manage them as a group.
That said, I'm sure there must be a way to reset these newer models. Probably have to write them an email (they never answer support in my experience).
Yeah I am going to proxy them...
Never did a proxy. I had the dead board but discovered that the solar array ip is hacked and Someone diverts hash away from kano.is to where ever.
If I bring the miner here to my home behind two routers with different ip the miner gives me two good boards and spends power to mine two good boards.
If I take miner to solar array I get credit for board but two board mine. this is a completely different issue with from the dead board... I have seen this issue with s-1 s-3 s-5 s-7 s-9. one board gets diverted. you pay power for two boards or three board depends on the miner.
but the mining site gives you credit for one board less then you have.
the cure is change your ip and change your password.
SO the new miner had 1 dead board and then was mining withe two boards. After a while one board dropped from kano pool but the miner still pulled same power for two boards.
I took the miner to my house different ip.. So I change the password and now can not sign into the miner. Or reset it. I am tired of fucking with it. It is mining.
2 boards work fine see below:
I had one incidence similar to your situation where reset didn't work and I had no way to reach it.
I was very pissed and somehow throw it into another router's LAN. It got its new ip then all of sudden I was able to reach it and change its settings. Very weird.
I stacked a modem then two routers then the miner the address left 192.168.0.126
I was able to rest it back to stock then back to kano.is and I now have a different password then root. thanks
August 22, 2016, 10:39:13 PM
Very sorry to hear about the DOA S9, fortunately, i haven't had any bad luck on the S9-B12 that i received today. Hope it gets resolved quickly...
it is 2/3 working so i am down say 450 usd unless they replace it.
as for lost password it is pointed at my pool
At the risk of getting even more OT...
I guess you're not using a proxy? If you were, then this would be less painful because you'd still be able to change the pool at the proxy level.
I've been using the Stratehm stratum-proxy on an RPi and am happy with it. Pointed my S9s at the proxy on a local IP and now I can manage them as a group.
That said, I'm sure there must be a way to reset these newer models. Probably have to write them an email (they never answer support in my experience).
Yeah I am going to proxy them...
Never did a proxy. I had the dead board but discovered that the solar array ip is hacked and Someone diverts hash away from kano.is to where ever.
If I bring the miner here to my home behind two routers with different ip the miner gives me two good boards and spends power to mine two good boards.
If I take miner to solar array I get credit for board but two board mine. this is a completely different issue with from the dead board... I have seen this issue with s-1 s-3 s-5 s-7 s-9. one board gets diverted. you pay power for two boards or three board depends on the miner.
but the mining site gives you credit for one board less then you have.
the cure is change your ip and change your password.
SO the new miner had 1 dead board and then was mining withe two boards. After a while one board dropped from kano pool but the miner still pulled same power for two boards.
I took the miner to my house different ip.. So I change the password and now can not sign into the miner. Or reset it. I am tired of fucking with it. It is mining.
2 boards work fine see below:
I had one incidence similar to your situation where reset didn't work and I had no way to reach it.
I was very pissed and somehow throw it into another router's LAN. It got its new ip then all of sudden I was able to reach it and change its settings. Very weird.
August 22, 2016, 09:49:42 PM
Very sorry to hear about the DOA S9, fortunately, i haven't had any bad luck on the S9-B12 that i received today. Hope it gets resolved quickly...
it is 2/3 working so i am down say 450 usd unless they replace it.
as for lost password it is pointed at my pool
At the risk of getting even more OT...
I guess you're not using a proxy? If you were, then this would be less painful because you'd still be able to change the pool at the proxy level.
I've been using the Stratehm stratum-proxy on an RPi and am happy with it. Pointed my S9s at the proxy on a local IP and now I can manage them as a group.
That said, I'm sure there must be a way to reset these newer models. Probably have to write them an email (they never answer support in my experience).
Yeah I am going to proxy them...
Never did a proxy. I had the dead board but discovered that the solar array ip is hacked and Someone diverts hash away from kano.is to where ever.
If I bring the miner here to my home behind two routers with different ip the miner gives me two good boards and spends power to mine two good boards.
If I take miner to solar array I get credit for board but two board mine. this is a completely different issue with from the dead board... I have seen this issue with s-1 s-3 s-5 s-7 s-9. one board gets diverted. you pay power for two boards or three board depends on the miner.
but the mining site gives you credit for one board less then you have.
the cure is change your ip and change your password.
SO the new miner had 1 dead board and then was mining withe two boards. After a while one board dropped from kano pool but the miner still pulled same power for two boards.
I took the miner to my house different ip.. So I change the password and now can not sign into the miner. Or reset it. I am tired of fucking with it. It is mining.
2 boards work fine see below:
August 22, 2016, 09:39:33 PM
I have all my miners with a hosting company and work individually with my miners remotely through a vpn. Is there a dashboard that I can view my critical information without remoting onto each miner?
Jump to: