anyone have the shipping details?
Topic: Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order - page 296. (Read 531168 times)
June 28, 2016, 08:13:24 PM
I made the payment after 5 minutes release of batch 4,. the sales page said will ship out immediately...,...been waiting for over 24hour++, where's my UPS tracking code...
anyone have the shipping details?
anyone have the shipping details?
June 28, 2016, 07:35:49 PM
Interesting..
Bitmain already has some kind of plans for going into 10nm process and even into 7nm process.
This picture was released at Bitmain's Facebook page in 22th June 2016:
Bitmain already has some kind of plans for going into 10nm process and even into 7nm process.
This picture was released at Bitmain's Facebook page in 22th June 2016:
Well it is in print.. on a poster on in the photo.
I know that looks good.
I know the time frame is what's in question.
I know right now they have working 0.1 watt per gh gear.
So they may do a new version of it at .075 watts in 9 months.
Then they may go for the 10nm in 18 months. I do not see a working 10nm in under 27 months.
But only a guess on my part.
I am with you on this one. I do not see a new breakthrough model(10nm) for another 2-3 years.
An improved s-9 type chip size 16nm is more likely to come in 6-9 months maybe 12-15 months since no one has any .09 watt gear to push them to improve.
June 28, 2016, 07:32:51 PM
Does anyone has a picture of the controller board? Which cyclone does it is?
thx
fubly
thx
fubly
June 28, 2016, 06:31:08 PM
Interesting..
Bitmain already has some kind of plans for going into 10nm process and even into 7nm process.
This picture was released at Bitmain's Facebook page in 22th June 2016:
Bitmain already has some kind of plans for going into 10nm process and even into 7nm process.
This picture was released at Bitmain's Facebook page in 22th June 2016:
Well it is in print.. on a poster on in the photo.
I know that looks good.
I know the time frame is what's in question.
I know right now they have working 0.1 watt per gh gear.
So they may do a new version of it at .075 watts in 9 months.
Then they may go for the 10nm in 18 months. I do not see a working 10nm in under 27 months.
But only a guess on my part.
I am with you on this one. I do not see a new breakthrough model(10nm) for another 2-3 years.
June 28, 2016, 06:19:35 PM
Hmmm... So when did AntPool start looking at Eth and LTC??? https://www.antpool.com/home.htm
They see Eth as a threat to them and are using an ancient Roman method of allowing slaves and conquered to become citizens of the empire.
My analysis points to a big spike in Eth mining after the ½ ing. So why not have Eth as a pool of yours.
I did not do any LTC since it can use asics.
A 4 card eth rig with newest rx 480 miners should be able to do 85mh at 400 watts and this makes it better then the s-9 after the ½ ing.
June 28, 2016, 05:10:51 PM
Hmmm... So when did AntPool start looking at Eth and LTC??? https://www.antpool.com/home.htm
June 28, 2016, 04:09:31 PM
Yes, it works now in Nicehash.
File System Version - Fri Jun 24 16:25:13 CST 2016
3xS9 (650M)=45.51 TH/s
But today I prefer Antpool with first S9 software - Fri Jun 24 16:25:13 CST 2016
why ?
Because the majority of my 10 and 2/3 x S9 B1 working in Antpool at speed 13.9 THs
only three of them are 13.5THs-13.7THs as with old and with the new software.
There was a time I would have considered with Nicehash a big deal. But it's just not like the old day's with coins launching and huge profit's, now they pay very little over and sometimes under. And consider their fee "NiceHash charges a processing fee from each party of hash rate trade (buyers and sellers) made through the service. Currently our fee is set at 3%."
I think there are MUCH better options out there with pools to mine, Antpool is one of them to mine with over nicehash. I see people using Antpoool, Kano.is, F2, BTCC, slush, etc much more often then going to nicehash.
June 28, 2016, 03:31:27 PM
Yes, it works now in Nicehash.
File System Version - Fri Jun 24 16:25:13 CST 2016
3xS9 (650M)=45.51 TH/s
But today I prefer Antpool with first S9 software - Fri Jun 24 16:25:13 CST 2016
why ?
Because the majority of my 10 and 2/3 x S9 B1 working in Antpool at speed 13.9 THs
only three of them are 13.5THs-13.7THs as with old and with the new software.
June 28, 2016, 02:14:59 PM
this will mean i may not get my batch 4 until july 5th
June 28, 2016, 01:26:56 PM
Anyone get shipping notice on B4? I thought these things were supposed to be on hand and ready to ship. 
June 28, 2016, 12:14:47 PM
ah Bitmain finally put up the new firmware so the S9 will work with NICEHASH. Except when you try to use p=? and the password line!!! at least you can hash now.
Which of them do you mean ?
https://shop.bitmain.com/support.htm?pid=00720160628032419599ebY2YSlj06DE
All of them you just have to match the ? MHZ located on your S9 hash board and download the one that matches your miner. 500 , 600 , 650 MHZ depending which one you have.
Yes, it works now in Nicehash.
File System Version - Fri Jun 24 16:25:13 CST 2016
3xS9 (650M)=45.51 TH/s
But today I prefer Antpool with first S9 software - Fri Jun 24 16:25:13 CST 2016
why ?
June 28, 2016, 12:13:05 PM
Hmm. Still, looking at the next nodes makes sense and now is the time to start playing with ideas that could take advantage of what those noes could offer. Emphasis on 'could'.
That is then followed by when will the 10/7nm nodes be viable for mass production of ANY chip? My crystal ball says, "Not for a minimum of 3 years away".
That is then followed by when will the 10/7nm nodes be viable for mass production of ANY chip? My crystal ball says, "Not for a minimum of 3 years away".
June 28, 2016, 11:16:09 AM
Interesting..
Bitmain already has some kind of plans for going into 10nm process and even into 7nm process.
This picture was released at Bitmain's Facebook page in 22th June 2016:
Bitmain already has some kind of plans for going into 10nm process and even into 7nm process.
This picture was released at Bitmain's Facebook page in 22th June 2016:
Well it is in print.. on a poster on in the photo.
I know that looks good.
I know the time frame is what's in question.
I know right now they have working 0.1 watt per gh gear.
So they may do a new version of it at .075 watts in 9 months.
Then they may go for the 10nm in 18 months. I do not see a working 10nm in under 27 months.
But only a guess on my part.
June 28, 2016, 10:53:25 AM
Interesting..
Bitmain already has some kind of plans for going into 10nm process and even into 7nm process.
This picture was released at Bitmain's Facebook page in 22th June 2016:
Bitmain already has some kind of plans for going into 10nm process and even into 7nm process.
This picture was released at Bitmain's Facebook page in 22th June 2016:
June 28, 2016, 07:16:59 AM
ah Bitmain finally put up the new firmware so the S9 will work with NICEHASH. Except when you try to use p=? and the password line!!! at least you can hash now.
Which of them do you mean ?
https://shop.bitmain.com/support.htm?pid=00720160628032419599ebY2YSlj06DE
All of them you just have to match the ? MHZ located on your S9 hash board and download the one that matches your miner. 500 , 600 , 650 MHZ depending which one you have.
Yes, it works now in Nicehash.
File System Version - Fri Jun 24 16:25:13 CST 2016
3xS9 (650M)=45.51 TH/s
But today I prefer Antpool with first S9 software - Fri Jun 24 16:25:13 CST 2016
June 28, 2016, 06:54:14 AM
Has anyone tried to switch the stock fans of the S9, with Noctua F12 3000 RPM? If you can share thought or even results?
it will not work. do not try it.
I tried it on the s-5 no go and on the s-7.
http://www.homedepot.com/p/12-in-x-25-ft-Insulated-Flexible-Duct-R6-Silver-Jacket-F6IFD12X300/100182573
put it in the duct above.
lower clock to 500 manually set fans to 60%
watch your temps 65- 95 is good
so if you are too hot lower clock to 475. good luck
psu
<<<<<20ft>>>>> wires
______________________________________________________ V____________
<<<< air flow miner <2 feet>
____________________________________________________________________
Is this helping with the noise? and what is your ambient temp?
this did wonders for my s-7's running in my garage last winter.
my current setup does not use these as I am partners in a solar array. I provide the miners buy solar provides the power
current s-9 and solar array
https://bitcointalksearch.org/topic/pair-of-s-9s-now-running-photos-are-up-1512186
https://bitcointalksearch.org/topic/solar-array-starting-to-look-good-1369207
To find my s-7 sound proofing threads will take time.
https://bitcointalksearch.org/topic/how-to-sound-proof-a-pair-of-s-7-miners-1188217
Found it for you
June 28, 2016, 05:20:17 AM
ah Bitmain finally put up the new firmware so the S9 will work with NICEHASH. Except when you try to use p=? and the password line!!! at least you can hash now.
Which of them do you mean ?
https://shop.bitmain.com/support.htm?pid=00720160628032419599ebY2YSlj06DE
All of them you just have to match the ? MHZ located on your S9 hash board and download the one that matches your miner. 500 , 600 , 650 MHZ depending which one you have.
June 28, 2016, 03:00:38 AM
Has anyone tried to switch the stock fans of the S9, with Noctua F12 3000 RPM? If you can share thought or even results?
it will not work. do not try it.
I tried it on the s-5 no go and on the s-7.
http://www.homedepot.com/p/12-in-x-25-ft-Insulated-Flexible-Duct-R6-Silver-Jacket-F6IFD12X300/100182573
put it in the duct above.
lower clock to 500 manually set fans to 60%
watch your temps 65- 95 is good
so if you are too hot lower clock to 475. good luck
psu
<<<<<20ft>>>>> wires
______________________________________________________ V____________
<<<< air flow miner <2 feet>
____________________________________________________________________
Is this helping with the noise? and what is your ambient temp?
June 28, 2016, 02:50:42 AM
ah Bitmain finally put up the new firmware so the S9 will work with NICEHASH. Except when you try to use p=? and the password line!!! at least you can hash now.
Which of them do you mean ?
https://shop.bitmain.com/support.htm?pid=00720160628032419599ebY2YSlj06DE
June 28, 2016, 02:33:13 AM
Has anyone tried to switch the stock fans of the S9, with Noctua F12 3000 RPM? If you can share thought or even results?
it will not work. do not try it.
I tried it on the s-5 no go and on the s-7.
http://www.homedepot.com/p/12-in-x-25-ft-Insulated-Flexible-Duct-R6-Silver-Jacket-F6IFD12X300/100182573
put it in the duct above.
lower clock to 500 manually set fans to 60%
watch your temps 65- 95 is good
so if you are too hot lower clock to 475. good luck
psu
<<<<<20ft>>>>> wires
______________________________________________________ V____________
<<<< air flow miner <2 feet>
____________________________________________________________________
Jump to: