Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s] - page 24.

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: stompysteve on August 20, 2014, 12:25:26 AM

Quote from: ?? on ??

Is there any reason that all of the screws need to be put on each blade? Would it be fine if only 5 or 6 are used?
Thanks

what did you lose some screws lol

it cant be good to have them not all screwed in

Advisable to have more to put local pressure on the chips for good heat transfer.

Quote from: WBF1 on August 19, 2014, 10:44:17 PM

Can I power 2 units from a mix of 2 PSUs? I have that corsair 850 and the EVGA 1300

http://www.evga.com/Products/Product.aspx?pn=120-G2-1300-XR

Obviously together they can pump out enough power, but I wasn't sure if this kinda setup is advisable....

Yes thats fine to use one PSU to help another out as long as you keep them on separate blades. So the 1300 will power 5 blades, the corsair 3.

stompysteve

hero member

Activity: 574

Merit: 500

Quote from: ?? on ??

Is there any reason that all of the screws need to be put on each blade? Would it be fine if only 5 or 6 are used?
Thanks

what did you lose some screws lol

it cant be good to have them not all screwed in

WBF1

sr. member

Activity: 419

Merit: 250

Can I power 2 units from a mix of 2 PSUs? I have that corsair 850 and the EVGA 1300

http://www.evga.com/Products/Product.aspx?pn=120-G2-1300-XR

Obviously together they can pump out enough power, but I wasn't sure if this kinda setup is advisable....

Swimmer63

legendary

Activity: 1593

Merit: 1004

Quote from: WBF1 on August 19, 2014, 10:23:37 PM

Thoughts on this for a power supply?

http://www.corsair.com/en-us/hx-series-hx850-power-supply-850-watt-80-plus-gold-certified-modular-psu

I have it sitting unused. Or am I gonna have to swap out for my EVGA monster?

IMHO you are going to be right on the edge. Definitely no over-clocking. It's a Corsair so it probably will not burn up at stock. Even if it works, it's not ideal. You would be better off using it for 3 boards then if you have another small one lying around using it for the fourth board.

WBF1

sr. member

Activity: 419

Merit: 250

Thoughts on this for a power supply?

http://www.corsair.com/en-us/hx-series-hx850-power-supply-850-watt-80-plus-gold-certified-modular-psu

I have it sitting unused. Or am I gonna have to swap out for my EVGA monster?

blackheart13

sr. member

Activity: 426

Merit: 250

So I received mine today & finished assembling them. When powered on I can get it to identify all 4 boards. However only 1 or 2 will mine. The board that mines isn't always #1. It seems to be random (after mining for approx 10 minutes Asics on the good board start to go bad). The dip switches are done correctly. How they are powered isn't the issue. Originally was using a 1200w psu. Added another 850 with each board having 2 pci-e. Didn't make a difference. Have also used different controllers.
Any ideas or something that I am missing? Have tried 3 of 10 with same results so far

cesarm

member

Activity: 92

Merit: 10

Quote from: friedcat on August 19, 2014, 10:33:27 AM

1. The miner can not directly run with f2pool. If you want to mine on f2pool, you need a PC or a raspberry PI
with a mining proxy. The ethernet controller needs to be pointed to the proxy instead of the pool.

2. We now offer the shipping of fully assembled devices. If you need them to be shipped as a whole please specify
in your order. We still prefer separate shipping though, because it will reduce the potential shipping damage significantly.

3. The ethernet controller needs a 12V 1A DC input. You could either use a separate AC/DC for it, or wire one
directly from your PSU for the hashing boards.

4. Shipping to countries outside mainland China is free.

What is the MOQ for fully assembled devices ?

area3121

full member

Activity: 139

Merit: 100

you need to put all screw for better thermal heat trasfer on the board to the heat sink... all screw is keeping the gap beetween the board and heat sink..

dont be lazy just putting a scew... lol Tongue

jjdub7

hero member

Activity: 938

Merit: 502

Quote from: alex-x on August 18, 2014, 09:19:53 PM

just one question

was rockxie not a wholesaler for friedcat. then he issued a ipo to raise funds to make a rockminer from friedcats chips. now friedcat comes along and undercuts him with his own hardware.

just the picture i got or am i missing something and they still support each other

Rockxie & RM's apparent strategy during gen3 was to profit from buying AM's gen3 chips after FC had sold his fabricated miners and go for a secondary market sweep with smaller-time miners. I have a few of the 32 GH/s R-boxes...they're solid little units, but not marketable to the big-name players in the mining game. Its the same as if Intel decided to make computers in addition to their processors - Lenovo, Dell, et. al would still buy Intel processors for their consoles, but Intel would grab a share of the market one rung down on the vertical ladder.

This time, AM gave them a bit of a head start on the ~TH single-unit market - keep in mind that AM is still primarily a chip manufacturer and that building hardware units is generally a gravy game beyond that.

Mabsark

legendary

Activity: 826

Merit: 1004

Does purchasing pre-assembled units cost extra?

friedcat

donator

Activity: 848

Merit: 1005

1. The miner can not directly run with f2pool. If you want to mine on f2pool, you need a PC or a raspberry PI
with a mining proxy. The ethernet controller needs to be pointed to the proxy instead of the pool.

2. We now offer the shipping of fully assembled devices. If you need them to be shipped as a whole please specify
in your order. We still prefer separate shipping though, because it will reduce the potential shipping damage significantly.

3. The ethernet controller needs a 12V 1A DC input. You could either use a separate AC/DC for it, or wire one
directly from your PSU for the hashing boards.

4. Shipping to countries outside mainland China is free.

whonesta

sr. member

Activity: 379

Merit: 250

Out the Door!!!

area3121

full member

Activity: 139

Merit: 100

better if the friedcar sell 5pcs bulk not 10pcs ...

5pcs set is fair

cxboyminer

hero member

Activity: 896

Merit: 500

I was too late to hijack the DHL flight with the 13 packages that left hk Sad

Have to wait for canary's package if his one is not on board

Rockxie, bitmaintech also work together IMO.

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

Quote from: alex-x on August 18, 2014, 09:19:53 PM

just one question

was rockxie not a wholesaler for friedcat. then he issued a ipo to raise funds to make a rockminer from friedcats chips. now friedcat comes along and undercuts him with his own hardware.

just the picture i got or am i missing something and they still support each other

Rockxie said they cooperate...

alex-x

newbie

Activity: 8

Merit: 0

just one question

was rockxie not a wholesaler for friedcat. then he issued a ipo to raise funds to make a rockminer from friedcats chips. now friedcat comes along and undercuts him with his own hardware.

just the picture i got or am i missing something and they still support each other

bbxx

hero member

Activity: 728

Merit: 500

cryptoshark

Quote from: CanaryInTheMine on August 18, 2014, 03:39:41 PM

Quote from: bbxx on August 18, 2014, 10:16:08 AM

Quote from: bbxx on August 17, 2014, 12:19:18 PM

3 days ago i got information that it will be shipped in three days.

i will post info if i get tracking number.

today is sunday so i think i have to wait at least 1 day more

got tracking number
not picked up from hk

you can setup auto notification on your DHL number to email and text you at every step of the way. don't forget about time difference too.

yes i know that, thanks
it seems 13 packages left hk

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

Quote from: bbxx on August 18, 2014, 10:16:08 AM

Quote from: bbxx on August 17, 2014, 12:19:18 PM

3 days ago i got information that it will be shipped in three days.

i will post info if i get tracking number.

today is sunday so i think i have to wait at least 1 day more

got tracking number
not picked up from hk

you can setup auto notification on your DHL number to email and text you at every step of the way. don't forget about time difference too.

bbxx

hero member

Activity: 728

Merit: 500

cryptoshark

Quote from: whonesta on August 18, 2014, 10:56:25 AM

Quote from: bbxx on August 18, 2014, 10:16:08 AM

Quote from: bbxx on August 17, 2014, 12:19:18 PM

3 days ago i got information that it will be shipped in three days.

i will post info if i get tracking number.

today is sunday so i think i have to wait at least 1 day more

got tracking number
not picked up from hk

Hmmph Still NO tracking... ugh

When did you Order/Pay bbxx?

4 days ago

whonesta

sr. member

Activity: 379

Merit: 250

Quote from: bbxx on August 18, 2014, 10:16:08 AM

Quote from: bbxx on August 17, 2014, 12:19:18 PM

3 days ago i got information that it will be shipped in three days.

i will post info if i get tracking number.

today is sunday so i think i have to wait at least 1 day more

got tracking number
not picked up from hk

Hmmph Still NO tracking... ugh

When did you Order/Pay bbxx?

Topic: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s] - page 24. (Read 88157 times)