Bitcoin Forum>Bitcoin>Mining>Hardware
Pages:
Author

Topic: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s] - page 21. (Read 88194 times)

Blazed
legendary
Activity: 2128
Merit: 1119
Re: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s]
August 25, 2014, 10:12:33 PM
#174
Quote from: ?? on ??
Quote from: CanaryInTheMine on August 25, 2014, 08:34:45 PM
the joke is on me... counting out 156 screws per Tube from 15,000-17,000 thousand bulk screws I was sent.... here comes the scale method and sandwich bags...

Better hope they used heavier bags then used with my shipment. .225 mil plastic, probably lasted 10 minutes in shipping.

So you do have 1 hashing now?  What sort of stats are you getting?
whonesta
sr. member
Activity: 379
Merit: 250
Re: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s]
August 25, 2014, 10:02:50 PM
#173
Quote from: TheJuice on August 25, 2014, 06:54:12 PM
Please tell me this is a joke. This has got to be a joke.

Nope, in fact it is 156 2M x 5mm to properly hold 4 hash boards to cooling rig. I tried less and had erratic heat issues. All 156 in and she is warming up nice 96.37% and climbing..  onto finish #2.

Quote from: Blazed on August 25, 2014, 09:15:18 PM
So has anyone actually built one of these and had it work?  I was reading the other thread and no one has them working after multiple days?

Once I got all the parts and assembled took 10 minutes to setup, although I am a Network engineer with 10+ years exp.  but if you have worked with ants you know that you will need to create a sub-net to create 192.168.0.X network.

Quote from: CanaryInTheMine on August 25, 2014, 08:34:45 PM
the joke is on me... counting out 156 screws per Tube from 15,000-17,000 thousand bulk screws I was sent.... here comes the scale method and sandwich bags...

Better hope they used heavier bags then used with my shipment. .225 mil plastic, probably lasted 10 minutes in shipping.
helipotte
hero member
Activity: 650
Merit: 500
Pick and place? I need more coffee.
Re: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s]
August 25, 2014, 09:41:02 PM
#172
Quote from: CanaryInTheMine on August 25, 2014, 08:34:45 PM
Quote from: TheJuice on August 25, 2014, 06:54:12 PM
Quote from: whonesta on August 25, 2014, 02:46:49 PM
yes indeed 144 screws holes to hold all 4 boards to the heat sinks. tiny little shits too  Shocked

Also that is not counting a handful of holes which are off to the side, as I said still no hashing boards so I am not entirely sure if they are needed. Still counting what I received to then divide by 10.



Looks like 1440 to me, still counting.

Seems the .5mil bags they put the hardware in fell apart found remnants in box.

Please tell me this is a joke. This has got to be a joke.

the joke is on me... counting out 156 screws per Tube from 15,000-17,000 thousand bulk screws I was sent.... here comes the scale method and sandwich bags...

Did you order like 100 of these. That would be 15600 screws!
Blazed
legendary
Activity: 2128
Merit: 1119
Re: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s]
August 25, 2014, 09:15:18 PM
#171
So has anyone actually built one of these and had it work?  I was reading the other thread and no one has them working after multiple days?
hdbuck
legendary
Activity: 1260
Merit: 1002
Re: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s]
August 25, 2014, 08:39:54 PM
#170
Quote from: daddyfatsax on August 25, 2014, 08:38:14 PM
Quote from: CanaryInTheMine on August 25, 2014, 08:34:45 PM
the joke is on me... counting out 156 screws per Tube from 15,000-17,000 thousand bulk screws I was sent.... here comes the scale method and sandwich bags...

You sound like Johnny Depp in Blow weighing out money instead of counting it.  Grin

ha! you beat me to it! Grin but yea +1: weight in distribution process.. ^^
daddyfatsax
hero member
Activity: 857
Merit: 1000
Anger is a gift.
Re: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s]
August 25, 2014, 08:38:14 PM
#169
Quote from: CanaryInTheMine on August 25, 2014, 08:34:45 PM
the joke is on me... counting out 156 screws per Tube from 15,000-17,000 thousand bulk screws I was sent.... here comes the scale method and sandwich bags...

You sound like Johnny Depp in Blow weighing out money instead of counting it.  Grin
CanaryInTheMine
donator
Activity: 2352
Merit: 1060
between a rock and a block!
Re: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s]
August 25, 2014, 08:34:45 PM
#168
Quote from: TheJuice on August 25, 2014, 06:54:12 PM
Quote from: whonesta on August 25, 2014, 02:46:49 PM
yes indeed 144 screws holes to hold all 4 boards to the heat sinks. tiny little shits too  Shocked

Also that is not counting a handful of holes which are off to the side, as I said still no hashing boards so I am not entirely sure if they are needed. Still counting what I received to then divide by 10.



Looks like 1440 to me, still counting.

Seems the .5mil bags they put the hardware in fell apart found remnants in box.

Please tell me this is a joke. This has got to be a joke.

the joke is on me... counting out 156 screws per Tube from 15,000-17,000 thousand bulk screws I was sent.... here comes the scale method and sandwich bags...
CanaryInTheMine
donator
Activity: 2352
Merit: 1060
between a rock and a block!
Re: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s]
August 25, 2014, 08:33:20 PM
#167
Quote from: whonesta on August 25, 2014, 02:40:52 PM
Quote from: CanaryInTheMine on August 25, 2014, 12:12:43 PM
Quote from: whonesta on August 25, 2014, 12:04:21 PM

One of the boxes has a noise coming from it...

Not sure if that is enough, guess I have to separate them out...  FUN!

I am pretty sure that is not enough..  4 x 10 units = 40 - 15 = 25 Short by my count..  Friedcat any help?

Will continue after I actually get full delivery.........

WOW!!! speechless...

Can you tell me how many screws are needed for 1 tube in total?

Looks like 4 - 4M x 55mm(allen head, 4 nylon washers), 4 - 4M x 8mm(phillips head), and 144 - 2M x 6mm(phillips head); each machine.
Hmmm... I got 39*4=156 for smallest screws that hold PCB to the heatsink. sidehack confirmed with me.
daddyfatsax
hero member
Activity: 857
Merit: 1000
Anger is a gift.
Re: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s]
August 25, 2014, 07:24:17 PM
#166
Quote from: TheJuice on August 25, 2014, 06:54:12 PM
Quote from: whonesta on August 25, 2014, 02:46:49 PM
yes indeed 144 screws holes to hold all 4 boards to the heat sinks. tiny little shits too  Shocked

Also that is not counting a handful of holes which are off to the side, as I said still no hashing boards so I am not entirely sure if they are needed. Still counting what I received to then divide by 10.

SNIP

Looks like 1440 to me, still counting.

Seems the .5mil bags they put the hardware in fell apart found remnants in box.

Please tell me this is a joke. This has got to be a joke.

Looking at Dogie's guide for the Tusnami, there are 36 screws for each board.

https://farm4.staticflickr.com/3868/14632156588_262621eeb5_o.jpg

There are a couple of extra holes as well, so 144 + 4-6 extra screws. That is a shit load of screws.

I am plugging in my screw driver batteries now.

TheJuice
hero member
Activity: 845
Merit: 609
Re: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s]
August 25, 2014, 06:54:12 PM
#165
Quote from: whonesta on August 25, 2014, 02:46:49 PM
yes indeed 144 screws holes to hold all 4 boards to the heat sinks. tiny little shits too  Shocked

Also that is not counting a handful of holes which are off to the side, as I said still no hashing boards so I am not entirely sure if they are needed. Still counting what I received to then divide by 10.



Looks like 1440 to me, still counting.

Seems the .5mil bags they put the hardware in fell apart found remnants in box.

Please tell me this is a joke. This has got to be a joke.
arklan
legendary
Activity: 1778
Merit: 1008
Re: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s]
August 25, 2014, 05:55:20 PM
#164
so buying some of these when i get some money... beautiful.
TheRealSteve
hero member
Activity: 686
Merit: 500
FUN > ROI
Re: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s]
August 25, 2014, 03:23:08 PM
#163
Quote from: whonesta on August 25, 2014, 02:46:49 PM
I am not entirely sure if they are needed. Still counting what I received to then divide by 10.
Depends on how well you want the thermal transfer between the board and the heat sinks to work.  Order up a decent screwdriver (dual-action or electric) and you'll be done in no time Smiley
WBF1
sr. member
Activity: 419
Merit: 250
Re: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s]
August 25, 2014, 02:49:09 PM
#162
Quote from: whonesta on August 25, 2014, 02:46:49 PM
yes indeed 144 screws holes to hold all 4 boards to the heat sinks. tiny little shits too  Shocked

Also that is not counting a handful of holes which are off to the side, as I said still no hashing boards so I am not entirely sure if they are needed. Still counting what I received to then divide by 10.

Wow this'll be a fun project...
whonesta
sr. member
Activity: 379
Merit: 250
Re: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s]
August 25, 2014, 02:46:49 PM
#161
yes indeed 144 screws holes to hold all 4 boards to the heat sinks. tiny little shits too  Shocked

Also that is not counting a handful of holes which are off to the side, as I said still no hashing boards so I am not entirely sure if they are needed. Still counting what I received to then divide by 10.



Looks like 1440 to me, still counting.

Seems the .5mil bags they put the hardware in fell apart found remnants in box.
hdbuck
legendary
Activity: 1260
Merit: 1002
Re: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s]
August 25, 2014, 02:43:22 PM
#160
Quote from: whonesta on August 25, 2014, 02:40:52 PM
Quote from: CanaryInTheMine on August 25, 2014, 12:12:43 PM
Quote from: whonesta on August 25, 2014, 12:04:21 PM

One of the boxes has a noise coming from it...

Not sure if that is enough, guess I have to separate them out...  FUN!

I am pretty sure that is not enough..  4 x 10 units = 40 - 15 = 25 Short by my count..  Friedcat any help?

Will continue after I actually get full delivery.........

WOW!!! speechless...

Can you tell me how many screws are needed for 1 tube in total?

Looks like 4 - 6M x 55mm(allen head, 4 nylon washers), 4 - 6M x 8mm(phillips head), and 144 - 2m x 6mm(phillips head); each machine.

wuut?!  Undecided
whonesta
sr. member
Activity: 379
Merit: 250
Re: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s]
August 25, 2014, 02:40:52 PM
#159
Quote from: CanaryInTheMine on August 25, 2014, 12:12:43 PM
Quote from: whonesta on August 25, 2014, 12:04:21 PM

One of the boxes has a noise coming from it...

Not sure if that is enough, guess I have to separate them out...  FUN!

I am pretty sure that is not enough..  4 x 10 units = 40 - 15 = 25 Short by my count..  Friedcat any help?

Will continue after I actually get full delivery.........

WOW!!! speechless...

Can you tell me how many screws are needed for 1 tube in total?

Looks like 4 - 4M x 55mm(allen head, 4 nylon washers), 4 - 4M x 8mm(phillips head), and 144 - 2M x 6mm(phillips head); each machine.
ChuckBuck
hero member
Activity: 1372
Merit: 783
better everyday ♥
Re: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s]
August 25, 2014, 12:22:05 PM
#158
That can't possibly be true?!!   Huh

That many screws to put together an ASICMiner Tube?  That can't be right...

Talk about having a loose screw!   Tongue
CanaryInTheMine
donator
Activity: 2352
Merit: 1060
between a rock and a block!
Re: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s]
August 25, 2014, 12:12:43 PM
#157
Quote from: whonesta on August 25, 2014, 12:04:21 PM

One of the boxes has a noise coming from it...

Not sure if that is enough, guess I have to separate them out...  FUN!

I am pretty sure that is not enough..  4 x 10 units = 40 - 15 = 25 Short by my count..  Friedcat any help?

Will continue after I actually get full delivery.........

WOW!!! speechless...

Can you tell me how many screws are needed for 1 tube in total?
wpgdeez
hero member
Activity: 728
Merit: 500
Re: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s]
August 25, 2014, 12:08:05 PM
#156
Wow, so much fail with the AM tube so far.
whonesta
sr. member
Activity: 379
Merit: 250
Re: Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s]
August 25, 2014, 12:04:21 PM
#155
Well they Finally made it...  ALMOST!  DHL lost the 2 boxes with the hash cards in them, really??  Anyway they were located and "should" arrive this evening. Check that I get the pleasure of going and picking them up. Hey Dogie is that part of the Bulk discount experience?

That being said, I begin preparing for the build out,


One of the boxes has a noise coming from it...



Not sure if that is enough, guess I have to separate them out...  FUN!



I am pretty sure that is not enough..  4 x 10 units = 40 - 15 = 25 Short by my count..  Friedcat any help?...  FOUND!! during sort.

Will continue after I actually get full delivery.........
Pages:
Bitcoin Forum>Bitcoin>Mining>Hardware
Jump to: