Topic: BUZZCOIN - OPENSOURCE NON-PROFIT BLOCKCHAIN IMPLEMENTATION TO SAVE THE BEES - page 34. (Read 101540 times)

It sounds very much like you've been staking on the wrong chain since September, I'm afraid to say... You can check for sure by searching for your address on explorer.buzzcoin.info


There's a new wallet - check the updated original post for details

Did BUZZ change anything lately, done re-branding or something?

I was able to recover the coin, but now syncing has stopped at block # 936851, no movement past that point.  If anyone has links on how to force a network sync, paste them below please.  Wondering if I need to rebuild the config file, is it just a regular batch file?  Thanks again for any help, bit frustrating  


EDIT - just going through the posts, is there something I need to do to go from wallet v1 - 3?  I am wondering if I was staking against a wrong chain..?  thoughts?

second EDIT - After deleting all files in the buzzcoin folder minus the wallet backup file, I was able to sync up fully, but balance is only showing the original amount purchased (63k) on 9/15/2017 vs. what I showed in wallet v.1 (1.4 million).  Are these coins lost or no longer valid?  if I could have a developer reach out/reply that would be awesome, I hate to think I was staking into outterspace haha =o(

I can't answer why your bootstrap download doesn't appear to have worked - it's updated automatically every 6 hours, so that shouldn't be an issue. However, from experience, it DOES take time to get the blockchain up to date...

Those orphaned blocks that you mention - they will be the result of another wallet trying to stake at the same time as, or within a second or two, of yours. Four times in a row sounds like bad luck, admittedly, but your wallet ought to stake soon... Hope that helps somewhat

Looking for some syncing help w/ new wallet, I updated the config file w/ all the nodes AND downloaded the new bootstrap data.  Still just says 24 hours behind, I get active connections just no movement past block # 934757.  Thoughts?

I also tried replacing ALL files inside the folder, and only the original coins sent to the wallet from September show, and all mined amounts are grey and say "generated but not accepted mined". 

Thanks in advance, hope the last 4 months of staking isn't a loss.

In theory, yes. However, as it states in the changelog document (see the post above or the original announcement), it's not guaranteed that you will stake

Can any amount of Buzz stake in their own wallet?

You might need to check your buzzcoin.conf file... this is the list I have in mine and syncing isn't a problem...

addnode=51.15.95.128
addnode=138.68.47.202
addnode=51.15.95.128
addnode=138.68.47.202
addnode=2.222.205.242
addnode=86.22.241.219
addnode=176.105.170.139
addnode=210.133.184.32
addnode=68.36.32.82
addnode=23.16.245.100
addnode=75.115.172.38
addnode=51.15.198.252
addnode=23.248.72.180
addnode=24.59.247.244
addnode=122.121.18.219
addnode=105.224.169.63
addnode=174.17.227.133
addnode=134.255.218.219
addnode=208.102.21.75
addnode=108.18.239.54
addnode=177.205.5.116
addnode=196.215.74.8
addnode=37.133.224.184
addnode=45.77.90.63
addnode=197.88.50.146
addnode=31.214.149.95
addnode=160.16.188.40
addnode=82.21.85.26
addnode=203.220.88.5
addnode=77.149.195.33
addnode=73.30.55.10
addnode=90.255.31.57
addnode=59.30.164.248
addnode=163.158.18.61
addnode=93.224.34.154
addnode=80.109.8.19
addnode=66.74.48.5
addnode=51.15.198.252
addnode=175.100.60.160
addnode=94.176.234.254
addnode=86.120.29.202
addnode=84.28.37.230
addnode=77.216.223.59
addnode=176.88.37.28
addnode=94.254.178.61
addnode=163.172.73.56
addnode=151.48.150.172
addnode=174.52.26.36
addnode=178.115.229.216
addnode=192.55.192.51
addnode=169.0.218.220
addnode=86.145.239.3
addnode=73.244.171.230
addnode=187.184.64.174
addnode=74.124.24.89
addnode=196.201.119.171
addnode=27.85.16.63
addnode=90.207.14.224
addnode=111.92.87.249
addnode=171.6.240.140
addnode=189.216.114.180
addnode=190.46.5.198
addnode=174.116.51.117
addnode=102.249.255.33
addnode=93.244.148.47
addnode=72.24.151.223
addnode=45.77.77.169
addnode=45.32.123.226
addnode=31.10.132.97
addnode=193.70.87.150
addnode=54.229.201.178
addnode=178.190.205.140
addnode=70.29.5.78
addnode=138.219.199.254
addnode=86.167.11.181
addnode=86.88.138.144
addnode=68.59.103.96
addnode=206.45.25.188
addnode=45.58.219.225
addnode=86.0.33.188
addnode=184.91.134.239
addnode=54.153.104.109
addnode=83.135.74.46
addnode=103.207.37.189
addnode=58.96.71.148
addnode=197.184.2.106
addnode=134.255.216.111
addnode=217.61.125.82
addnode=45.76.143.246
addnode=104.158.65.105
addnode=79.117.14.30
addnode=49.243.67.197
addnode=96.230.106.18
addnode=37.221.194.168
addnode=35.176.44.217
addnode=185.223.28.111
addnode=95.156.227.95
addnode=186.90.33.188
addnode=73.170.247.74
addnode=70.119.179.88
addnode=68.189.67.81
addnode=185.183.104.138
addnode=176.63.17.26
addnode=166.137.218.128
addnode=82.0.106.109
addnode=197.210.25.131
addnode=74.103.253.185
addnode=45.76.2.76
addnode=35.176.151.188
addnode=203.94.73.33
addnode=134.255.216.30
addnode=34.240.83.155
addnode=174.138.220.224
addnode=82.154.88.35
addnode=145.130.42.73
addnode=68.145.138.120
addnode=96.41.250.222
addnode=66.177.231.87
addnode=151.236.232.208
addnode=182.19.52.68
addnode=50.100.214.5

The explorer is at explorer.buzzcoin.info

New site is good. This project has excellent devs. 

I think more than 0.02$

I need help. I upgraded to the new wallet (3.0) but my wallet is out of sync and is showing only one connection. The old wallet had like 16 connections this morning before the upgrade.

Maybe I need more addnodes?

I transferred some buzz to stake united 24 hours ago, and it still says processing. The buzzcoin block chain explorer is down http://blockexplorer.buzzcoin.info/network and has been for over 24 hours... anyone know whats happening?

Thank you

Currently, I'm unaware if there is a default value or not and haven't tested it with my own wallet, but it's easy enough to type setstakesplitthreshold 25000000 into the debug window console! That way, your stake reward would have to be over 25,000,000 before it gets split into two smaller inputs - not something that's likely to happen!

Ahhh I see it.  Thanks!

"No More Coin Control

We have disabled the need for coin control with the “setstakesplitthreshold” command in the wallet. Any stakes that are higher than 25,000,000 will be split into multiple inputs, but anything below this will remain as a single input. This can be changed with console command “setstakesplitthreshold”, which accepts an integer value from between 0 and 25,000,000."


Is the default value set to 25,000,000?  This seems implied, but I don't like to make assumptions.

Thanks!

It's in the changelog document - see the links I posted in the update. Essentially, you need to open the debug window, go to the console tab and set the 'setstakesplitthreshold' value

** How can we "tell the wallet to combine staked inputs automatically"?  I looked at the options in the new wallet and I am having trouble figuring out how to do this.

Thanks for your help!

is it true the rumors about masternode 

Yay the wallet is 100% clean from virus total