[Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s) - page 32.

cubbo

newbie

Activity: 26

Merit: 0

Quote from: RNguyen on May 22, 2018, 12:20:22 AM

Hey guys. I have recently build 8 VEGA rigs and using CastXMR. All is doing fine except yesterday one of my rigs went offline. Now when I tried to open de bat file it instantly shuts down the file again. I have reinstalled windows, adrenaline drivers etcetera but the problem persists. Im using exactly the same bat file (with another workername) as other rigs. Does anyone have idea whats happening here?

Check to make sure your copy of CastXMR.exe is still in the same directory. I had this a few times and windows defender had deleted or quarantined the file.

Skyzer0

newbie

Activity: 266

Merit: 0

as you can see above and now this.

pretty sure XMR Stak wont be doing all this, continiouly crashing on Dual rigs where you have to run one miner for RX Vega and one for RX580, rejected by pool, and other crap

does the --forcecompute help for this?

https://i.imgur.com/4FaBdq5.png

lstrike

newbie

Activity: 31

Merit: 0

Quote from: treanski on May 22, 2018, 01:27:51 AM

Quote from: TheDarkAngel on May 21, 2018, 03:51:51 AM

hynix are limited, you cannot do more Sad

thats ccomplete bullshit...i have some of the red devil vegas too...they are ~20hs slower than my vegas with samsung memory...

you just need the right miner/overdriventool/powerplaytables config, thatzs it

Yeah I am using all of them, I can achieve 1900+ on Red Devil, but the rig is unstable - works few minuute to couple of hours and bye-bye...
I have tried cast-xmr, xmr-stack, srb, claymore...
Overdriventool, reg files (powerplay), bios flashes...
1050MHz memory is max before artefacts and 950MHz is max for continious work (1700-1750H/s) for Red Devil (Hynix).

Could you share your settings pls?

Kaezar

newbie

Activity: 73

Merit: 0

Quote from: treanski on May 22, 2018, 01:27:51 AM

Quote from: TheDarkAngel on May 21, 2018, 03:51:51 AM

hynix are limited, you cannot do more Sad

thats ccomplete bullshit...i have some of the red devil vegas too...they are ~20hs slower than my vegas with samsung memory...

you just need the right miner/overdriventool/powerplaytables config, thatzs it

Please show you ppt settings for red devil, power consumption, ONT settings and miner screen with h/r.

treanski

full member

Activity: 364

Merit: 106

ONe Social Network.

Quote from: TheDarkAngel on May 21, 2018, 03:51:51 AM

hynix are limited, you cannot do more Sad

thats ccomplete bullshit...i have some of the red devil vegas too...they are ~20hs slower than my vegas with samsung memory...

you just need the right miner/overdriventool/powerplaytables config, thatzs it

R0mi

full member

Activity: 305

Merit: 148

Theranos Coin - IoT + micro-blood arrays = Moon!

Quote from: RNguyen on May 22, 2018, 12:20:22 AM

Hey guys. I have recently build 8 VEGA rigs and using CastXMR. All is doing fine except yesterday one of my rigs went offline. Now when I tried to open de bat file it instantly shuts down the file again. I have reinstalled windows, adrenaline drivers etcetera but the problem persists. Im using exactly the same bat file (with another workername) as other rigs. Does anyone have idea whats happening here?

1. Launch GPU-Z and check to see whether OpenCL is still checked. If not, DDU and reinstall drivers.

2. Use OverDriveNTool to down-clock your cards a bit and see whether this allows a restart that holds. If it does, then check card by card to see which cards can handle more aggressive ONT settings and which cannot.

My guess: Use DDU then reinstall drivers.

RNguyen

newbie

Activity: 12

Merit: 0

Hey guys. I have recently build 8 VEGA rigs and using CastXMR. All is doing fine except yesterday one of my rigs went offline. Now when I tried to open de bat file it instantly shuts down the file again. I have reinstalled windows, adrenaline drivers etcetera but the problem persists. Im using exactly the same bat file (with another workername) as other rigs. Does anyone have idea whats happening here?

Skyzer0

newbie

Activity: 266

Merit: 0

what causes this? and the 2900 kh/s is just a bug from when i connected screen to the rig.

honestly, i run 2 miners on this rig one for vega and one for rx580, this happened twice on this rig but none of the others who run the same hardware ?

https://i.imgur.com/LVRuuW5.png

gameboy366

jr. member

Activity: 252

Merit: 8

How to use --forcecompute and --maxmem for a single Vega56 ? I tried maxmem but it says that of I disable HBCC, i'd get upto 3% increase but if do disable HBCC, i get half the hashrate.

Also sometimes the miner just keeps showing hashrates and doesn't accept any share or new job.

schriss

newbie

Activity: 27

Merit: 0

Quote from: netgeek3 on May 21, 2018, 11:06:05 AM

I can't speak for everyone, but I can confirm that on my rigs, the Windows 10 update (which happened while we were traveling) definitely DID re-enable Crossfire on every Vega in our rigs. After editing the registry, reloading the drivers and running OverdriveN, all is back to normal on hashrate.

Just thought I'd mention it.

That's what I mentioned few posts back, but could not verify myself. Thanks for confirming.

netgeek3

newbie

Activity: 12

Merit: 0

I can't speak for everyone, but I can confirm that on my rigs, the Windows 10 update (which happened while we were traveling) definitely DID re-enable Crossfire on every Vega in our rigs. After editing the registry, reloading the drivers and running OverdriveN, all is back to normal on hashrate.

Just thought I'd mention it.

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: x3t9fi on May 21, 2018, 07:59:06 AM

same here - after the "april-update" from microsoft dropped from 2050-2070 hashes to about 1400 - tried to reinstall the drivers, use a newer version 1.0 of xmr etc. didnt find any solutions or workarounds yet...

edit: back to the old build - same speed 2050-2070hashes again...

yeah... the "april-update" has done nothing but havoc on my systems. It's slowed them down, and not just mining, but general use also.

x3t9fi

sr. member

Activity: 415

Merit: 253

same here - after the "april-update" from microsoft dropped from 2050-2070 hashes to about 1400 - tried to reinstall the drivers, use a newer version 1.0 of xmr etc. didnt find any solutions or workarounds yet...

edit: back to the old build - same speed 2050-2070hashes again...

lstrike

newbie

Activity: 31

Merit: 0

Quote from: wharmus on May 21, 2018, 04:14:38 AM

Quote from: lstrike on May 20, 2018, 11:59:48 PM

Quote from: gtxminer on May 20, 2018, 04:05:40 PM

Quote from: lstrike on May 20, 2018, 06:30:21 AM

Quote from: luisito809 on May 16, 2018, 10:01:29 AM

Quote from: jdubya on May 16, 2018, 01:34:24 AM

Is anyone else trying to use Vega 56s and Frontier Editions on the same rig? What a pain in the d@ck.
If so, and you've been successful, how are you doing it? I'm thinking I'll have to do the registry mods (tables) for the 56s.
Is there an easier way?

thanks

i prefer to have them in 2 separate rigs, these are mine

vega 56

http://prntscr.com/jinscn

Vega frontier

http://prntscr.com/jint9v
-----------------------------------------------------------

These are their Hash And Settings

https://prnt.sc/jbfwgp

https://prnt.sc/jbfwyf

Could you share your .reg files, pls?
Did you flash vega 56 cards to vega 64 bios?

I can only achieve 1950H/s to my Vega 56 reference cards if flashed to vega 64 bios and 1100Mhz memory @ 960mV core...

https://image.ibb.co/jiGat8/Capture.png

where did you get the cast xmr ui?

https://github.com/anadventureisu/cast-xmr-ui/releases

Does anyone know what are best settings/mods for Hynix vegas? The best I can get from my Red Devil is around 1700H/s @950Mhz.

How much does your card consume? measured at the wall?

rig with 5 cards 950W - 1050W (depending on the surrounding temperature) - measured with hardware wattmeter, no software bullshits.
Let's say ~170W per card (Motherboard with 4 core AMD CPU is about 100W idle and no cards, idle with cards - 180W)
Winter:
Overdriventool 930 = HWinfo 0.915
Summer:
Overdriventool 960 = HWinfo 0.938

wharmus

newbie

Activity: 50

Merit: 0

Quote from: lstrike on May 20, 2018, 11:59:48 PM

Quote from: gtxminer on May 20, 2018, 04:05:40 PM

Quote from: lstrike on May 20, 2018, 06:30:21 AM

Quote from: luisito809 on May 16, 2018, 10:01:29 AM

Quote from: jdubya on May 16, 2018, 01:34:24 AM

Is anyone else trying to use Vega 56s and Frontier Editions on the same rig? What a pain in the d@ck.
If so, and you've been successful, how are you doing it? I'm thinking I'll have to do the registry mods (tables) for the 56s.
Is there an easier way?

thanks

i prefer to have them in 2 separate rigs, these are mine

vega 56

http://prntscr.com/jinscn

Vega frontier

http://prntscr.com/jint9v
-----------------------------------------------------------

These are their Hash And Settings

https://prnt.sc/jbfwgp

https://prnt.sc/jbfwyf

Could you share your .reg files, pls?
Did you flash vega 56 cards to vega 64 bios?

I can only achieve 1950H/s to my Vega 56 reference cards if flashed to vega 64 bios and 1100Mhz memory @ 960mV core...

https://image.ibb.co/jiGat8/Capture.png

where did you get the cast xmr ui?

https://github.com/anadventureisu/cast-xmr-ui/releases

Does anyone know what are best settings/mods for Hynix vegas? The best I can get from my Red Devil is around 1700H/s @950Mhz.

How much does your card consume? measured at the wall?

TheDarkAngel

jr. member

Activity: 84

Merit: 2

hynix are limited, you cannot do more Sad

lstrike

newbie

Activity: 31

Merit: 0

Quote from: gtxminer on May 20, 2018, 04:05:40 PM

Quote from: lstrike on May 20, 2018, 06:30:21 AM

Quote from: luisito809 on May 16, 2018, 10:01:29 AM

Quote from: jdubya on May 16, 2018, 01:34:24 AM

Is anyone else trying to use Vega 56s and Frontier Editions on the same rig? What a pain in the d@ck.
If so, and you've been successful, how are you doing it? I'm thinking I'll have to do the registry mods (tables) for the 56s.
Is there an easier way?

thanks

i prefer to have them in 2 separate rigs, these are mine

vega 56

http://prntscr.com/jinscn

Vega frontier

http://prntscr.com/jint9v
-----------------------------------------------------------

These are their Hash And Settings

https://prnt.sc/jbfwgp

https://prnt.sc/jbfwyf

Could you share your .reg files, pls?
Did you flash vega 56 cards to vega 64 bios?

I can only achieve 1950H/s to my Vega 56 reference cards if flashed to vega 64 bios and 1100Mhz memory @ 960mV core...

https://image.ibb.co/jiGat8/Capture.png

where did you get the cast xmr ui?

https://github.com/anadventureisu/cast-xmr-ui/releases

Does anyone know what are best settings/mods for Hynix vegas? The best I can get from my Red Devil is around 1700H/s @950Mhz.

SpceGhst

jr. member

Activity: 269

Merit: 4

Quote from: ton22150 on May 20, 2018, 08:05:57 PM

CryptoNight Alloy what --algo= support Thank You....

Alloy uses its own Cryptonight variant, which Cast does not currently support.

ton22150

newbie

Activity: 4

Merit: 0

CryptoNight Alloy what --algo= support Thank You....

gtxminer

newbie

Activity: 24

Merit: 0

Quote from: lstrike on May 20, 2018, 06:30:21 AM

Quote from: luisito809 on May 16, 2018, 10:01:29 AM

Quote from: jdubya on May 16, 2018, 01:34:24 AM

Is anyone else trying to use Vega 56s and Frontier Editions on the same rig? What a pain in the d@ck.
If so, and you've been successful, how are you doing it? I'm thinking I'll have to do the registry mods (tables) for the 56s.
Is there an easier way?

thanks

i prefer to have them in 2 separate rigs, these are mine

vega 56

http://prntscr.com/jinscn

Vega frontier

http://prntscr.com/jint9v
-----------------------------------------------------------

These are their Hash And Settings

https://prnt.sc/jbfwgp

https://prnt.sc/jbfwyf

Could you share your .reg files, pls?
Did you flash vega 56 cards to vega 64 bios?

I can only achieve 1950H/s to my Vega 56 reference cards if flashed to vega 64 bios and 1100Mhz memory @ 960mV core...

https://image.ibb.co/jiGat8/Capture.png

where did you get the cast xmr ui?

Topic: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s) - page 32. (Read 206424 times)