10x vega , it mines 10-15 hours then BSOD.
im using safe settings , stock bios , everything shd work , so what is wrong?
Topic: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s) - page 35. (Read 206409 times)
May 13, 2018, 04:06:49 PM
May 13, 2018, 03:49:44 PM
Hi can anyone help.
How do you set up remote monitoring?
I use Awsome Miner just to monitor my rigs and I am unsure how to set it up.
I added "--remoteaccess" to my .bat file ....but I cant access it?
It will work if I input the desired http address into the rig I want to monitor but thats counter productive ...its not remote access if I have to physically put in the address on the rig I want to check on lol. I can just look at the read out on the mining programme.
Never mind I figured it out .
How do you set up remote monitoring?
I use Awsome Miner just to monitor my rigs and I am unsure how to set it up.
I added "--remoteaccess" to my .bat file ....but I cant access it?
It will work if I input the desired http address into the rig I want to monitor but thats counter productive ...its not remote access if I have to physically put in the address on the rig I want to check on lol. I can just look at the read out on the mining programme.
Never mind I figured it out .
May 13, 2018, 12:26:00 PM
We still wait the next update 
When next update Im confuseD?
May 13, 2018, 08:07:27 AM
We still wait the next update
May 13, 2018, 07:45:22 AM
I just tried again with SUMO on v1.0.0
I get the same problem mentioned above. Pool rejects and advices to switch to alternate miner.
When trying to troubleshoot, it was evident the documentation needs to be updated. Neither the help (-h flag), the home page or the front page here on Bitcointalk is updated with information on new algorithms.
Anyway, no luck so far with CAST and Cryptonight Heavy. XMR_STAK works fine.
Here is the start command if anyone wonders:
cast_xmr-vega --algo=2 -I 9 --nonicehash --fastswitch -S pool.sumokoin.hashvault.pro:7777 -u Sumo-adress.... -p "x" -G 0,1,2,3,4
What problem?I get the same problem mentioned above. Pool rejects and advices to switch to alternate miner.
When trying to troubleshoot, it was evident the documentation needs to be updated. Neither the help (-h flag), the home page or the front page here on Bitcointalk is updated with information on new algorithms.
Anyway, no luck so far with CAST and Cryptonight Heavy. XMR_STAK works fine.
Here is the start command if anyone wonders:
cast_xmr-vega --algo=2 -I 9 --nonicehash --fastswitch -S pool.sumokoin.hashvault.pro:7777 -u Sumo-adress.... -p "x" -G 0,1,2,3,4
My config working fine with Cast v1.0.0 for vega56&64 (no --maxmem option for v56):
Code:
cast_xmr-vega -a 2 --maxmem --fastjobswitch --reconnects 9999 -R --remoteport 5447 -G 0,1,2 --opencl 1 -I 9 -S eu-ru02.miningrigrentals.com:3333 -u user.here -p x3-vega64
Hi, what is -I 9 for? I don't see it in any documentation / help? Could you please explain? Thank you.
it does nothing
May 13, 2018, 01:17:09 AM
why iam getting so many error rate while using cast miner more then 10 percent error rate
http://prntscr.com/jh74ig
try without any overclock. http://prntscr.com/jh74ig
May 13, 2018, 12:23:38 AM
why iam getting so many error rate while using cast miner more then 10 percent error rate
http://prntscr.com/jh74ig
http://prntscr.com/jh74ig
May 12, 2018, 07:04:21 AM
Hi,
I am the developer of rig-monitor (see here: https://bitcointalk.org/index.php?topic=2128602.0;all ) and got some requests to support castXMR. Could someone send an example call to the management API together with the json output?
Thanks
I am the developer of rig-monitor (see here: https://bitcointalk.org/index.php?topic=2128602.0;all ) and got some requests to support castXMR. Could someone send an example call to the management API together with the json output?
Thanks
May 11, 2018, 09:31:59 PM
Is there any way to increase the intensity on a single GPU?
I just got an FE and am getting 2.2kh+ on CN-Heavy with both stak & srbminer. However I’m only getting 1.6kh on Cast for some reason.
On srbminer I had to nearly double the intensity of my FE (120) over my 56’s (55). I’m wondering if there’s any way to try something similar on just that 1 GPU with Cast.
I just got an FE and am getting 2.2kh+ on CN-Heavy with both stak & srbminer. However I’m only getting 1.6kh on Cast for some reason.
On srbminer I had to nearly double the intensity of my FE (120) over my 56’s (55). I’m wondering if there’s any way to try something similar on just that 1 GPU with Cast.
May 10, 2018, 11:48:53 AM
There seems to be an issue with the New Windows 10 April Update and Cast XMR:
Quote
Cast miner won't initialize GPU's after latest Windows 10 update?
Miner recently installed the latest windows 10 updates overnight even though windows update was disabled in services and now Cast miner just sits during start at "Initializing GPU's", anyone else having this issue?
https://www.reddit.com/r/MoneroMining/comments/8if2y6/cast_miner_wont_initialize_gpus_after_latest
Miner recently installed the latest windows 10 updates overnight even though windows update was disabled in services and now Cast miner just sits during start at "Initializing GPU's", anyone else having this issue?
https://www.reddit.com/r/MoneroMining/comments/8if2y6/cast_miner_wont_initialize_gpus_after_latest
What's the problem exactly? I think I solved that.
There were 2 problems.
- ULPS
- unwanted iGPU driver update what makes the miner stop at initializing if you're using the iGPU
May 10, 2018, 11:37:15 AM
How are people finding cast on the new updated windows? My experience has been it is a little slower.
May 10, 2018, 11:34:09 AM
What has the hash power of the RX 580 4gb in the Heave Monero?
May 10, 2018, 10:01:39 AM
There seems to be an issue with the New Windows 10 April Update and Cast XMR:
Quote
Cast miner won't initialize GPU's after latest Windows 10 update?
Miner recently installed the latest windows 10 updates overnight even though windows update was disabled in services and now Cast miner just sits during start at "Initializing GPU's", anyone else having this issue?
https://www.reddit.com/r/MoneroMining/comments/8if2y6/cast_miner_wont_initialize_gpus_after_latest
Miner recently installed the latest windows 10 updates overnight even though windows update was disabled in services and now Cast miner just sits during start at "Initializing GPU's", anyone else having this issue?
https://www.reddit.com/r/MoneroMining/comments/8if2y6/cast_miner_wont_initialize_gpus_after_latest
May 10, 2018, 06:17:46 AM
Is there anyone with a working --log option?
The application stops working at the beginning when I want to create a log file
For some info:
What is the best power consumption you can get for a card that hashing 1900+ ?
The application stops working at the beginning when I want to create a log file
For some info:
What is the best power consumption you can get for a card that hashing 1900+ ?
May 09, 2018, 11:43:56 PM
Hi,
I've problem, that after few hour of mining on RX Vega 56, app just hangs. Card & Windows still works. I can close the window, and run application again.
No matter if OC or not...
Driver is 18.4.1.
However, performance is great. Thanks for great miner.
Any idea, hint/fix?
Thanks.
I've problem, that after few hour of mining on RX Vega 56, app just hangs. Card & Windows still works. I can close the window, and run application again.
No matter if OC or not...
Driver is 18.4.1.However, performance is great. Thanks for great miner.
Any idea, hint/fix?
Thanks.
better try driver 18.3.4 because some people reported driver 18.4.1 not stable for them.
I have the same issue and I am using driver 18.3.4. Miner hangs and continues to draw power while windows is still responsive.
May 09, 2018, 11:17:06 PM
I just tried again with SUMO on v1.0.0
I get the same problem mentioned above. Pool rejects and advices to switch to alternate miner.
When trying to troubleshoot, it was evident the documentation needs to be updated. Neither the help (-h flag), the home page or the front page here on Bitcointalk is updated with information on new algorithms.
Anyway, no luck so far with CAST and Cryptonight Heavy. XMR_STAK works fine.
Here is the start command if anyone wonders:
cast_xmr-vega --algo=2 -I 9 --nonicehash --fastswitch -S pool.sumokoin.hashvault.pro:7777 -u Sumo-adress.... -p "x" -G 0,1,2,3,4
What problem?I get the same problem mentioned above. Pool rejects and advices to switch to alternate miner.
When trying to troubleshoot, it was evident the documentation needs to be updated. Neither the help (-h flag), the home page or the front page here on Bitcointalk is updated with information on new algorithms.
Anyway, no luck so far with CAST and Cryptonight Heavy. XMR_STAK works fine.
Here is the start command if anyone wonders:
cast_xmr-vega --algo=2 -I 9 --nonicehash --fastswitch -S pool.sumokoin.hashvault.pro:7777 -u Sumo-adress.... -p "x" -G 0,1,2,3,4
My config working fine with Cast v1.0.0 for vega56&64 (no --maxmem option for v56):
Code:
cast_xmr-vega -a 2 --maxmem --fastjobswitch --reconnects 9999 -R --remoteport 5447 -G 0,1,2 --opencl 1 -I 9 -S eu-ru02.miningrigrentals.com:3333 -u user.here -p x3-vega64
Hi, what is -I 9 for? I don't see it in any documentation / help? Could you please explain? Thank you.
May 09, 2018, 06:43:19 PM
A couple of things I've learned about Cast...
When you're switching coins, even if the same algo, always reboot your rig before starting the new coin. You'll get the full hashrate of your GPU's.
If you receive the "Share Rejected - Unauthenticated" error, change to the next lowest hash port on the pool. Apparently, if you don't submit a valid share for a period of time, the pool drops you and you become "Unauthenticated".
That is all... Carry on!
When you're switching coins, even if the same algo, always reboot your rig before starting the new coin. You'll get the full hashrate of your GPU's.
If you receive the "Share Rejected - Unauthenticated" error, change to the next lowest hash port on the pool. Apparently, if you don't submit a valid share for a period of time, the pool drops you and you become "Unauthenticated".
That is all... Carry on!
May 09, 2018, 09:23:10 AM
Hi There!
I do not know about you guys, but I get better performance with CAST 0.9.06 version rather than 1.0. on Heavy algo.
About 50Hs per Vega or RX580.
Very stable with both though.
I do not know about you guys, but I get better performance with CAST 0.9.06 version rather than 1.0. on Heavy algo.
About 50Hs per Vega or RX580.
Very stable with both though.
I'm getting 1430+ average on castxmr 1.0.0 and only 1330+ average on 0.9.6 using vega 56 stock bios, blockchain driver. Is this where you got your miner? (https://github.com/glph3k/cast_xmr/releases)
Funny thing is I get the opposite results that you get. Although my 56s do not have stock BIOS.
At the moment with 9.06 i get 1400 on the 56s and 1500 on the 64.
If i switch to 1.0, I get lower rates than those. Using --maxmem and --memset
May 09, 2018, 07:54:29 AM
I just tried again with SUMO on v1.0.0
I get the same problem mentioned above. Pool rejects and advices to switch to alternate miner.
When trying to troubleshoot, it was evident the documentation needs to be updated. Neither the help (-h flag), the home page or the front page here on Bitcointalk is updated with information on new algorithms.
Anyway, no luck so far with CAST and Cryptonight Heavy. XMR_STAK works fine.
Here is the start command if anyone wonders:
cast_xmr-vega --algo=2 -I 9 --nonicehash --fastswitch -S pool.sumokoin.hashvault.pro:7777 -u Sumo-adress.... -p "x" -G 0,1,2,3,4
What problem?I get the same problem mentioned above. Pool rejects and advices to switch to alternate miner.
When trying to troubleshoot, it was evident the documentation needs to be updated. Neither the help (-h flag), the home page or the front page here on Bitcointalk is updated with information on new algorithms.
Anyway, no luck so far with CAST and Cryptonight Heavy. XMR_STAK works fine.
Here is the start command if anyone wonders:
cast_xmr-vega --algo=2 -I 9 --nonicehash --fastswitch -S pool.sumokoin.hashvault.pro:7777 -u Sumo-adress.... -p "x" -G 0,1,2,3,4
My config working fine with Cast v1.0.0 for vega56&64 (no --maxmem option for v56):
Code:
cast_xmr-vega -a 2 --maxmem --fastjobswitch --reconnects 9999 -R --remoteport 5447 -G 0,1,2 --opencl 1 -I 9 -S eu-ru02.miningrigrentals.com:3333 -u user.here -p x3-vega64
Hi, what is -I 9 for? I don't see it in any documentation / help? Could you please explain? Thank you.
May 09, 2018, 02:04:14 AM
I just tried again with SUMO on v1.0.0
I get the same problem mentioned above. Pool rejects and advices to switch to alternate miner.
When trying to troubleshoot, it was evident the documentation needs to be updated. Neither the help (-h flag), the home page or the front page here on Bitcointalk is updated with information on new algorithms.
Anyway, no luck so far with CAST and Cryptonight Heavy. XMR_STAK works fine.
Here is the start command if anyone wonders:
cast_xmr-vega --algo=2 -I 9 --nonicehash --fastswitch -S pool.sumokoin.hashvault.pro:7777 -u Sumo-adress.... -p "x" -G 0,1,2,3,4
What problem?I get the same problem mentioned above. Pool rejects and advices to switch to alternate miner.
When trying to troubleshoot, it was evident the documentation needs to be updated. Neither the help (-h flag), the home page or the front page here on Bitcointalk is updated with information on new algorithms.
Anyway, no luck so far with CAST and Cryptonight Heavy. XMR_STAK works fine.
Here is the start command if anyone wonders:
cast_xmr-vega --algo=2 -I 9 --nonicehash --fastswitch -S pool.sumokoin.hashvault.pro:7777 -u Sumo-adress.... -p "x" -G 0,1,2,3,4
My config working fine with Cast v1.0.0 for vega56&64 (no --maxmem option for v56):
Code:
cast_xmr-vega -a 2 --maxmem --fastjobswitch --reconnects 9999 -R --remoteport 5447 -G 0,1,2 --opencl 1 -I 9 -S eu-ru02.miningrigrentals.com:3333 -u user.here -p x3-vega64
Jump to: