Claymore's CryptoNote AMD GPU Miner v11.3 - page 132.

TheKoolaider

member

Activity: 84

Merit: 10

Quote from: carlo_0000 on February 15, 2017, 12:53:53 PM

i have that too with my 5x 470's they run average 760hs but 1 or 2 of them run in the 400-500's

i have to restart the miner a lot of time and change a bit clock setting till they all hit 750+ than i reset my clock to 1920

How are you hashing that high with those? Custom BIOS? I'm hashing 640 on 480 8GB cards and dream of achieving that.

Also, I would like to confirm that I had fan issues as well. If my fans were on auto, two of the six cards would go at a higher fan rate and the other would stay the same. Another issue that I've had was those same two cards that would fluctuate fan speed, would sometimes not have their fans spinning, and hashing at 100%. I have figured out that it was MSI Afterburner causing the issues with the fans. Once I removed AB, fans now are auto, but don't fluctuate up and down. I am now using Wattman to OC/UV.

Claymore 9.6/9.7 had these issues. Driver is 16.9.2. Win 10. Did test next driver up, same issue, but have not gone further with updates.

marvykkio

hero member

Activity: 798

Merit: 1000

I believe that it is time to also update this miner, trying to increase the speed

batko

full member

Activity: 169

Merit: 100

Quote from: JuanHungLo on February 16, 2017, 11:44:21 AM

Quote from: batko on February 14, 2017, 01:02:23 PM

with sapphire 280x hynix AFR I have 640Hs 1100/1625 mod bios,
Sapphire 280x Elpida BBBg 605Hs same clock mod bios.

I can approach that, too, but not without eventual HW errors with sgminer, that is why I said, "stable."

Out of curiosity, with what miner and config, drivers, etc. do you use for those results?

claymore 9.7 with 16.9.2 driver

ronin82srb

newbie

Activity: 8

Merit: 0

I have 6 x msi rx470 4gb, had problems 100% fan and fan stop working on drivers 16.9.2 win10pro. After installing 16.11.4 fan errors gone, but I have another bug, one rig frezes after hour or two mining. I'm mining eth and etc for now, until some fix or update comes.

JuanHungLo

hero member

Activity: 935

Merit: 1001

I don't always drink...

Quote from: batko on February 14, 2017, 01:02:23 PM

with sapphire 280x hynix AFR I have 640Hs 1100/1625 mod bios,
Sapphire 280x Elpida BBBg 605Hs same clock mod bios.

I can approach that, too, but not without eventual HW errors with sgminer, that is why I said, "stable."

Out of curiosity, with what miner and config, drivers, etc. do you use for those results?

biggee

member

Activity: 73

Merit: 10

Any chance we could get an update for the RX4xxx cards?

It's unusable for me at the moment as after a short while it switches the fans on my Sapphire 470 & 480's to 100% (although this isn't reported in Afterburner).

sorry2xs

legendary

Activity: 924

Merit: 1000

Dark Passenger Bitcoin miner 2013,Bitcoin node

is the a way to change the color for devfee mining Huh

carlo_0000

legendary

Activity: 1281

Merit: 1003

i have that too with my 5x 470's they run average 760hs but 1 or 2 of them run in the 400-500's

i have to restart the miner a lot of time and change a bit clock setting till they all hit 750+ than i reset my clock to 1920

mrtrodonet

newbie

Activity: 14

Merit: 0

I'm seeing a very weird behavior with my MSI 8gb rx480s.
I started a miner and got stable 750h/s at 1350/2250
After reboot i started the miner again and it gives me 480 h/s now.
Restarted miner and get 300h/s
Restarted a few more times and back to 480h/s

I'm using MSI afterburber on win10.
I killed wattman process.
Card is using 100% power and seems to be running at set clock speeds.

Config:
-a 4
-h 1024
set virtual memory to 16gb-20gb
before running the miner i run: setx GPU_MAX_ALLOC_PERCENT 100

Any ideas?

carlo_0000

legendary

Activity: 1281

Merit: 1003

Quote from: JuanHungLo on February 14, 2017, 11:41:58 AM

Quote from: batko on February 14, 2017, 09:30:43 AM

Quote from: JuanHungLo on February 14, 2017, 07:32:38 AM

Quote from: newmz on February 14, 2017, 06:47:42 AM

Quote from: avirdoz on February 11, 2017, 05:44:13 PM

Quote from: rinus on February 11, 2017, 05:36:53 PM

Hey guys

What miner should I use? Is minergate any good? Is it slower? Are fees higher ? I have no idea what is the difference. Help is much appreciated

For 2 gb cards claymore's, for 4gb and more better sgminer-gm.

I had a lot of problems trying to run sgminer-gm so I stuck to claymore.

I have 2 win 7 x64 rigs with 15.12 drivers, and both rigs are mostly 290s or 290Xs, but each rig also has 1 380 on it. I think sgminer-gm didn't like either the 15.12 drivers or the fact that I didn't have all the same GPUs on each rig. Claymore "just works".

Sgminer-gm seems to require quite a bit of skill in setting different parameters and I found it confusing and read conflicting information about how best to define the parameters.

If I could spend more time learning to use sgminer-gm I would love to try it but as I said - I found it difficult to set up correctly.

Do you have any suggestions about where to learn how to use sgminer-gm properly?

You assumption about 15.12 is correct. Use AMD drivers 16.9.2 or higher.
The following works for 380x:

set GPU_FORCE_64BIT_PTR 0
set GPU_MAX_HEAP_SIZE 100
set GPU_MAX_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_MAX_SINGLE_ALLOC_PERCENT 100

sgminer -k cryptonight -o stratum+tcp://monerohash.com:7777 -u ADDRESS -p x --rawintensity 512 -w 4 -g 2 --gpu-engine 1040 --gpu-memclock 1625 --auto-fan --temp-target 80 --no-submit-stale --no-extranonce

With my modded 380x I get 730 h/s. Can't speak for 290. But for 280x:--rawintensity 896 -w 8 -g 1 --gpu-engine 1070 --gpu-memclock 1550

Both yields better than the CM miner. Sorry, Claymore, I've always used your miners but you've been passed up.

You have good bios for R9 380x Tongue

whats results for 280x? --rawintensity 896 -w 8 -g 1 --gpu-engine 1070 --gpu-memclock 1550
?

It varies depending on card: Gigabyte at 1100/1550 elpida does 578, 1100/1500 hynix does 565
Sapphire Hynix, and XFX elpida 1050/1500 does 563 with sgminer all stable, no HW errors less than .2% rejects.

heu strange
with my 380 2gigas version not x, i do 600 with asus , xfx 619 and sapphire 622 with original bios and default clock (oc not stable and useless for little h/s)

batko

full member

Activity: 169

Merit: 100

with sapphire 280x hynix AFR I have 640Hs 1100/1625 mod bios,
Sapphire 280x Elpida BBBg 605Hs same clock mod bios.

JuanHungLo

hero member

Activity: 935

Merit: 1001

I don't always drink...

Quote from: batko on February 14, 2017, 09:30:43 AM

Quote from: JuanHungLo on February 14, 2017, 07:32:38 AM

Quote from: newmz on February 14, 2017, 06:47:42 AM

Quote from: avirdoz on February 11, 2017, 05:44:13 PM

Quote from: rinus on February 11, 2017, 05:36:53 PM

Hey guys

What miner should I use? Is minergate any good? Is it slower? Are fees higher ? I have no idea what is the difference. Help is much appreciated

For 2 gb cards claymore's, for 4gb and more better sgminer-gm.

I had a lot of problems trying to run sgminer-gm so I stuck to claymore.

I have 2 win 7 x64 rigs with 15.12 drivers, and both rigs are mostly 290s or 290Xs, but each rig also has 1 380 on it. I think sgminer-gm didn't like either the 15.12 drivers or the fact that I didn't have all the same GPUs on each rig. Claymore "just works".

Sgminer-gm seems to require quite a bit of skill in setting different parameters and I found it confusing and read conflicting information about how best to define the parameters.

If I could spend more time learning to use sgminer-gm I would love to try it but as I said - I found it difficult to set up correctly.

Do you have any suggestions about where to learn how to use sgminer-gm properly?

You assumption about 15.12 is correct. Use AMD drivers 16.9.2 or higher.
The following works for 380x:

set GPU_FORCE_64BIT_PTR 0
set GPU_MAX_HEAP_SIZE 100
set GPU_MAX_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_MAX_SINGLE_ALLOC_PERCENT 100

sgminer -k cryptonight -o stratum+tcp://monerohash.com:7777 -u ADDRESS -p x --rawintensity 512 -w 4 -g 2 --gpu-engine 1040 --gpu-memclock 1625 --auto-fan --temp-target 80 --no-submit-stale --no-extranonce

With my modded 380x I get 730 h/s. Can't speak for 290. But for 280x:--rawintensity 896 -w 8 -g 1 --gpu-engine 1070 --gpu-memclock 1550

Both yields better than the CM miner. Sorry, Claymore, I've always used your miners but you've been passed up.

You have good bios for R9 380x Tongue

whats results for 280x? --rawintensity 896 -w 8 -g 1 --gpu-engine 1070 --gpu-memclock 1550
?

It varies depending on card: Gigabyte at 1100/1550 elpida does 578, 1100/1500 hynix does 565
Sapphire Hynix, and XFX elpida 1050/1500 does 563 with sgminer all stable, no HW errors less than .2% rejects.

dnox

newbie

Activity: 16

Merit: 0

Hello, im actually having some trouble using claymore.
I have a AMD Radeon 5800 and installed claymore to mine with my gpu.
Im also using minergate miner to CPU mine.
But claymore is being responsible for 4 invalid shares in less than 24hs and this gave me a negative balance.
At first i tought it could be the heat since claymore was showing 80C on my gpu.
I set -tt to 50 and -fanmax to 100 and this solved the temperature problem, its now running at 60C. But even after fixing the cooling i got another invalid share and had to turn off claymore because it was making me lose money.
Is it because my GPU is an old model? Is there anyway i can fix it?

Thnx a lot in advance.

batko

full member

Activity: 169

Merit: 100

Quote from: JuanHungLo on February 14, 2017, 07:32:38 AM

Quote from: newmz on February 14, 2017, 06:47:42 AM

Quote from: avirdoz on February 11, 2017, 05:44:13 PM

Quote from: rinus on February 11, 2017, 05:36:53 PM

Hey guys

What miner should I use? Is minergate any good? Is it slower? Are fees higher ? I have no idea what is the difference. Help is much appreciated

For 2 gb cards claymore's, for 4gb and more better sgminer-gm.

I had a lot of problems trying to run sgminer-gm so I stuck to claymore.

I have 2 win 7 x64 rigs with 15.12 drivers, and both rigs are mostly 290s or 290Xs, but each rig also has 1 380 on it. I think sgminer-gm didn't like either the 15.12 drivers or the fact that I didn't have all the same GPUs on each rig. Claymore "just works".

Sgminer-gm seems to require quite a bit of skill in setting different parameters and I found it confusing and read conflicting information about how best to define the parameters.

If I could spend more time learning to use sgminer-gm I would love to try it but as I said - I found it difficult to set up correctly.

Do you have any suggestions about where to learn how to use sgminer-gm properly?

You assumption about 15.12 is correct. Use AMD drivers 16.9.2 or higher.
The following works for 380x:

set GPU_FORCE_64BIT_PTR 0
set GPU_MAX_HEAP_SIZE 100
set GPU_MAX_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_MAX_SINGLE_ALLOC_PERCENT 100

sgminer -k cryptonight -o stratum+tcp://monerohash.com:7777 -u ADDRESS -p x --rawintensity 512 -w 4 -g 2 --gpu-engine 1040 --gpu-memclock 1625 --auto-fan --temp-target 80 --no-submit-stale --no-extranonce

With my modded 380x I get 730 h/s. Can't speak for 290. But for 280x:--rawintensity 896 -w 8 -g 1 --gpu-engine 1070 --gpu-memclock 1550

Both yields better than the CM miner. Sorry, Claymore, I've always used your miners but you've been passed up.

You have good bios for R9 380x Tongue

whats results for 280x? --rawintensity 896 -w 8 -g 1 --gpu-engine 1070 --gpu-memclock 1550
?

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Hi Claymore...

A humble request.

Can you get the v9.7 ported to Linux?

Thanks

JuanHungLo

hero member

Activity: 935

Merit: 1001

I don't always drink...

Quote from: newmz on February 14, 2017, 06:47:42 AM

Quote from: avirdoz on February 11, 2017, 05:44:13 PM

Quote from: rinus on February 11, 2017, 05:36:53 PM

Hey guys

What miner should I use? Is minergate any good? Is it slower? Are fees higher ? I have no idea what is the difference. Help is much appreciated

For 2 gb cards claymore's, for 4gb and more better sgminer-gm.

I had a lot of problems trying to run sgminer-gm so I stuck to claymore.

I have 2 win 7 x64 rigs with 15.12 drivers, and both rigs are mostly 290s or 290Xs, but each rig also has 1 380 on it. I think sgminer-gm didn't like either the 15.12 drivers or the fact that I didn't have all the same GPUs on each rig. Claymore "just works".

Sgminer-gm seems to require quite a bit of skill in setting different parameters and I found it confusing and read conflicting information about how best to define the parameters.

If I could spend more time learning to use sgminer-gm I would love to try it but as I said - I found it difficult to set up correctly.

Do you have any suggestions about where to learn how to use sgminer-gm properly?

You assumption about 15.12 is correct. Use AMD drivers 16.9.2 or higher.
The following works for 380x:

set GPU_FORCE_64BIT_PTR 0
set GPU_MAX_HEAP_SIZE 100
set GPU_MAX_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_MAX_SINGLE_ALLOC_PERCENT 100

sgminer -k cryptonight -o stratum+tcp://monerohash.com:7777 -u ADDRESS -p x --rawintensity 512 -w 4 -g 2 --gpu-engine 1040 --gpu-memclock 1625 --auto-fan --temp-target 80 --no-submit-stale --no-extranonce

With my modded 380x I get 730 h/s. Can't speak for 290. But for 280x:--rawintensity 896 -w 8 -g 1 --gpu-engine 1070 --gpu-memclock 1550

Both yields better than the CM miner. Sorry, Claymore, I've always used your miners but you've been passed up.

newmz

sr. member

Activity: 372

Merit: 250

The road of excess leads to the palace of wisdom

Quote from: avirdoz on February 11, 2017, 05:44:13 PM

Quote from: rinus on February 11, 2017, 05:36:53 PM

Hey guys

What miner should I use? Is minergate any good? Is it slower? Are fees higher ? I have no idea what is the difference. Help is much appreciated

For 2 gb cards claymore's, for 4gb and more better sgminer-gm.

I had a lot of problems trying to run sgminer-gm so I stuck to claymore.

I have 2 win 7 x64 rigs with 15.12 drivers, and both rigs are mostly 290s or 290Xs, but each rig also has 1 380 on it. I think sgminer-gm didn't like either the 15.12 drivers or the fact that I didn't have all the same GPUs on each rig. Claymore "just works".

Sgminer-gm seems to require quite a bit of skill in setting different parameters and I found it confusing and read conflicting information about how best to define the parameters.

If I could spend more time learning to use sgminer-gm I would love to try it but as I said - I found it difficult to set up correctly.

Do you have any suggestions about where to learn how to use sgminer-gm properly?

drr0ss

member

Activity: 98

Merit: 10

Hey Claymore, do you plan to implement assembler features to the rest of your miners, and when [

]?

Hurtman

full member

Activity: 180

Merit: 100

sgminer not a better , claymore still much better

rinus

sr. member

Activity: 362

Merit: 258

Quote from: avirdoz on February 11, 2017, 05:44:13 PM

Quote from: rinus on February 11, 2017, 05:36:53 PM

Hey guys

What miner should I use? Is minergate any good? Is it slower? Are fees higher ? I have no idea what is the difference. Help is much appreciated

For 2 gb cards claymore's, for 4gb and more better sgminer-gm.

I have 6 cards sapphire rx480 8 giga. No minergate?

Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 132. (Read 2145056 times)