Claymore's CryptoNote AMD GPU Miner v11.3 - page 131.

rinus

sr. member

Activity: 362

Merit: 258

Quote from: TheKoolaider on February 22, 2017, 11:12:18 AM

Quote from: rinus on February 22, 2017, 05:19:38 AM

hey guys,

i have 6 saphire rx 480 nitro + 8g oc in my first rig but i had to wait ages before i could get those cards in belgium...

i want to build a second rig and want to use MSI RADEON RX 480 GAMING X 8G this time , are these cards as good as the saphires ??
and is there a difference in mining speed between 4Giga and 8Giga versions?

thx

I have 6 of the 8GB versions and have tested the 4GB.

Stock settings 4GB hash at ~600, 8GB hash at ~640. The MSI gaming x IMO have the best fans. So quiet and tremendous cooling. Definitely recommend.

Nice! DID you try to tweak it higher then 600?

TheKoolaider

member

Activity: 84

Merit: 10

Quote from: rinus on February 22, 2017, 05:19:38 AM

hey guys,

i have 6 saphire rx 480 nitro + 8g oc in my first rig but i had to wait ages before i could get those cards in belgium...

i want to build a second rig and want to use MSI RADEON RX 480 GAMING X 8G this time , are these cards as good as the saphires ??
and is there a difference in mining speed between 4Giga and 8Giga versions?

thx

I have 6 of the 8GB versions and have tested the 4GB.

Stock settings 4GB hash at ~600, 8GB hash at ~640. The MSI gaming x IMO have the best fans. So quiet and tremendous cooling. Definitely recommend.

rinus

sr. member

Activity: 362

Merit: 258

hey guys,

i have 6 saphire rx 480 nitro + 8g oc in my first rig but i had to wait ages before i could get those cards in belgium...

i want to build a second rig and want to use MSI RADEON RX 480 GAMING X 8G this time , are these cards as good as the saphires ??
and is there a difference in mining speed between 4Giga and 8Giga versions?

thx

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: fredeq on February 19, 2017, 04:46:44 PM

Quote from: carlo_0000 on February 18, 2017, 01:06:29 PM

i notice something else what is strange

when i put memory to 1900 start the miner is hash around 750mh
when i increase the memory to 2000 (hash speed stay the same)
i close the miner start the miner again with 2000 i get 800mh (at 2000 it s unstable gpu crash after few minutes)
but i decrease the memory to 1900 it s till hashing at 800 (but same computer crash few minute later)

but why is that ? does the miner lock the memory speed ?

I got the same thing, changing memory speed while miner has already been run has no effect on the hashing speed.
I actually got it on ETH miner as well (only on 470 and only on one machine)... confusing.

this miner is fkdup and probably doesn't know how to count hashes. if you start it, then close it and then start again it may often improve your hashrate 2-3%
sgminer doesn't give me that much crap.

EDIT: for polaris I think the "-a 4 -h 1024" is the most stable. Still sgminer does better, I'm getting stable (~2%rejects) 705-710h for weeks(mixed 370 & 470 rig) on modded UV rx470 @about 900mv, core=1150 mem=1950 slightly less power than 9.7 with unstable 689-705) I have also one win10 where 9.7 won't even start, while 9.6 runs fine.

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: biggee on February 16, 2017, 07:46:28 AM

Any chance we could get an update for the RX4xxx cards?

It's unusable for me at the moment as after a short while it switches the fans on my Sapphire 470 & 480's to 100% (although this isn't reported in Afterburner).

try 16.11.4 driver

CoM1ner

member

Activity: 65

Merit: 10

Quote from: carlo_0000 on February 20, 2017, 12:39:07 PM

Quote from: carlo_0000 on February 17, 2017, 03:37:41 PM

also the last driver i can use is 16.11.3, 16.11.4 and above they not working, i got a yellow ? on the driver
same happen with win 7 and 10 Huh

but is ok 16.11.3 is working fine, no fan bug

Its cause of custom bios I think. Use the pixel clock patch. It will sort the issue out for you and the cards will get detected.
https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher

Good Luck!

Is this patch for when the fans spin up to 100% for no reason on AMD cards?

dnox

newbie

Activity: 16

Merit: 0

Quote from: ccccccc7 on February 21, 2017, 01:34:06 PM

Quote from: biggee on February 20, 2017, 09:48:11 AM

Today across every pool I tried, on both of my rigs, Claymore 9.7 has started submitting bad shares, wrecking my unconfirmed balances on all the pools, actually putting me into negative balance.

WTF is going on?

Are you using minergate? I had this problem when I tried wolf miner after claymore and my balance was munched up by invalid shares Angry

i also had invalid shares with claymore on minergate. im using a radeon 5800 and tought it could be because its kinda old GPU.
i think im done with claymore, unfortunattely.

ccccccc7

full member

Activity: 223

Merit: 100

Quote from: biggee on February 20, 2017, 09:48:11 AM

Today across every pool I tried, on both of my rigs, Claymore 9.7 has started submitting bad shares, wrecking my unconfirmed balances on all the pools, actually putting me into negative balance.

WTF is going on?

Are you using minergate? I had this problem when I tried wolf miner after claymore and my balance was munched up by invalid shares Angry

carlo_0000

legendary

Activity: 1281

Merit: 1003

Quote from: biggee on February 20, 2017, 10:10:54 AM

Quote from: xneoenx on February 18, 2017, 09:02:29 AM

Quote from: carlo_0000 on February 17, 2017, 03:37:41 PM

also the last driver i can use is 16.11.3, 16.11.4 and above they not working, i got a yellow ? on the driver
same happen with win 7 and 10 Huh

but is ok 16.11.3 is working fine, no fan bug

Its cause of custom bios I think. Use the pixel clock patch. It will sort the issue out for you and the cards will get detected.
https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher

Good Luck!

Deffo not because of custom BIOS.

XFX RX470 (unmodded)
Crim 16.9.2
Win 10
Clay 9.7

After about 30 minutes, fan goes to 100%, followed by Windows freeze up.

we was talking about driver install with custom bios
not the fan bug

biggee

member

Activity: 73

Merit: 10

Quote from: xneoenx on February 18, 2017, 09:02:29 AM

Quote from: carlo_0000 on February 17, 2017, 03:37:41 PM

also the last driver i can use is 16.11.3, 16.11.4 and above they not working, i got a yellow ? on the driver
same happen with win 7 and 10 Huh

but is ok 16.11.3 is working fine, no fan bug

Its cause of custom bios I think. Use the pixel clock patch. It will sort the issue out for you and the cards will get detected.
https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher

Good Luck!

Deffo not because of custom BIOS.

XFX RX470 (unmodded)
Crim 16.9.2
Win 10
Clay 9.7

After about 30 minutes, fan goes to 100%, followed by Windows freeze up.

biggee

member

Activity: 73

Merit: 10

Today across every pool I tried, on both of my rigs, Claymore 9.7 has started submitting bad shares, wrecking my unconfirmed balances on all the pools, actually putting me into negative balance.

WTF is going on?

fredeq

legendary

Activity: 1537

Merit: 1005

Quote from: carlo_0000 on February 18, 2017, 01:06:29 PM

i notice something else what is strange

when i put memory to 1900 start the miner is hash around 750mh
when i increase the memory to 2000 (hash speed stay the same)
i close the miner start the miner again with 2000 i get 800mh (at 2000 it s unstable gpu crash after few minutes)
but i decrease the memory to 1900 it s till hashing at 800 (but same computer crash few minute later)

but why is that ? does the miner lock the memory speed ?

I got the same thing, changing memory speed while miner has already been run has no effect on the hashing speed.
I actually got it on ETH miner as well (only on 470 and only on one machine)... confusing.

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: wareck on February 19, 2017, 04:44:14 AM

Hi
There is a linux version working with nicehash ?

best regards

Olivier

Hope Claymore can update v9.7 or future miner for Linux.

v9.7 Windows works well with Nicehash (no 100% rejects).

The only Linux miner working with Nicehash Cryptonight is sgminer-gm-NH-v5.5.5.7

I use this: https://bitcointalksearch.org/topic/m.17904216

Etherion

sr. member

Activity: 512

Merit: 260

@Claymore are we going to see some updates for this miner now that you have mastered ASM?

I also hope that you will update the cpu version so that one can mine to the same secure pool.

wareck

member

Activity: 238

Merit: 10

Hi
There is a linux version working with nicehash ?

best regards

Olivier

carlo_0000

legendary

Activity: 1281

Merit: 1003

Quote from: xneoenx on February 18, 2017, 09:02:29 AM

Quote from: carlo_0000 on February 17, 2017, 03:37:41 PM

also the last driver i can use is 16.11.3, 16.11.4 and above they not working, i got a yellow ? on the driver
same happen with win 7 and 10 Huh

but is ok 16.11.3 is working fine, no fan bug

Its cause of custom bios I think. Use the pixel clock patch. It will sort the issue out for you and the cards will get detected.
https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher

Good Luck!

ha ok but i just keep the 16.11.3

i notice something else what is strange

when i put memory to 1900 start the miner is hash around 750mh
when i increase the memory to 2000 (hash speed stay the same)
i close the miner start the miner again with 2000 i get 800mh (at 2000 it s unstable gpu crash after few minutes)
but i decrease the memory to 1900 it s till hashing at 800 (but same computer crash few minute later)

but why is that ? does the miner lock the memory speed ?

xneoenx

member

Activity: 84

Merit: 10

Quote from: carlo_0000 on February 17, 2017, 03:37:41 PM

also the last driver i can use is 16.11.3, 16.11.4 and above they not working, i got a yellow ? on the driver
same happen with win 7 and 10 Huh

but is ok 16.11.3 is working fine, no fan bug

Its cause of custom bios I think. Use the pixel clock patch. It will sort the issue out for you and the cards will get detected.
https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher

Good Luck!

carlo_0000

legendary

Activity: 1281

Merit: 1003

Quote from: TheKoolaider on February 16, 2017, 02:14:36 PM

Quote from: carlo_0000 on February 15, 2017, 12:53:53 PM

i have that too with my 5x 470's they run average 760hs but 1 or 2 of them run in the 400-500's

i have to restart the miner a lot of time and change a bit clock setting till they all hit 750+ than i reset my clock to 1920

How are you hashing that high with those? Custom BIOS? I'm hashing 640 on 480 8GB cards and dream of achieving that.

Also, I would like to confirm that I had fan issues as well. If my fans were on auto, two of the six cards would go at a higher fan rate and the other would stay the same. Another issue that I've had was those same two cards that would fluctuate fan speed, would sometimes not have their fans spinning, and hashing at 100%. I have figured out that it was MSI Afterburner causing the issues with the fans. Once I removed AB, fans now are auto, but don't fluctuate up and down. I am now using Wattman to OC/UV.

Claymore 9.6/9.7 had these issues. Driver is 16.9.2. Win 10. Did test next driver up, same issue, but have not gone further with updates.

yes custom bios, couple page back in this thread
6x 470 corsair link report 858w on the wall, i hope this is not a problem for the psu because it s an rm750i

the 100% fan must be a driver problem, i had some of that too but also when i was mining something else
than hit 100% for a couple of minutes but msi afterburner did not show that
and after couple of minute the fan goes to 0% than gpu goes to 94°c and computer shutdown

also the last driver i can use is 16.11.3, 16.11.4 and above they not working, i got a yellow ? on the driver
same happen with win 7 and 10 Huh

but is ok 16.11.3 is working fine, no fan bug

ps_jb

hero member

Activity: 742

Merit: 500

Quote from: biggee on February 16, 2017, 07:46:28 AM

Any chance we could get an update for the RX4xxx cards?

It's unusable for me at the moment as after a short while it switches the fans on my Sapphire 470 & 480's to 100% (although this isn't reported in Afterburner).

It is super unstable on RX 480 here too.

Claymore actually promised to make an update after he will be done with ZEC miner. ZEC miner is done - so Claymore, please!

Yerba

member

Activity: 146

Merit: 10

Quote from: TheKoolaider on February 16, 2017, 02:14:36 PM

Quote from: carlo_0000 on February 15, 2017, 12:53:53 PM

i have that too with my 5x 470's they run average 760hs but 1 or 2 of them run in the 400-500's

i have to restart the miner a lot of time and change a bit clock setting till they all hit 750+ than i reset my clock to 1920

How are you hashing that high with those? Custom BIOS? I'm hashing 640 on 480 8GB cards and dream of achieving that.

Also, I would like to confirm that I had fan issues as well. If my fans were on auto, two of the six cards would go at a higher fan rate and the other would stay the same. Another issue that I've had was those same two cards that would fluctuate fan speed, would sometimes not have their fans spinning, and hashing at 100%. I have figured out that it was MSI Afterburner causing the issues with the fans. Once I removed AB, fans now are auto, but don't fluctuate up and down. I am now using Wattman to OC/UV.

Claymore 9.6/9.7 had these issues. Driver is 16.9.2. Win 10. Did test next driver up, same issue, but have not gone further with updates.

I have also 6x rx 480 8gb cards and they hash around 640-690 hash per card. Power consumption per rig 700w.

Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 131. (Read 2145056 times)