Claymore's CryptoNote AMD GPU Miner v11.3 - page 14.

altsay

sr. member

Activity: 359

Merit: 250

Quote from: UnclWish on June 08, 2018, 07:04:26 PM

Stop to attract to SRB miner. It unstable in hash speed as hell! To get max speed for my 580 cards I relaunch it 5-10 times. Rebuilding kernel bins is also different story...
Claymore's miners are stable as rock! Fast starting, stable speed.
Plus SRB miner slower on old 2xx and 3xx cards.
If people didn't like Claymore's miners they didn't use them.

My impression of Claymore is that i get 100% reject when mining Electroneum, though i'm not sure if Claymore mines it at all, otoh SRBMiner gets 100% accepted. Same card (R9 280x), same settings.

altsay

sr. member

Activity: 359

Merit: 250

Quote from: garytheasshole on June 15, 2018, 06:34:29 AM

Quote from: altsay on June 15, 2018, 03:49:59 AM

I'm getting Access is denied error NsGpuCNMiner.exe file. Even though i'm running start.bat file on windows powershell with admin privileges

Windwos defender breaking balls most likely.

Well yes, that was the problem.

garytheasshole

full member

Activity: 406

Merit: 105

Chosŏn Minjujuŭi Inmin Konghwaguk

Quote from: altsay on June 15, 2018, 03:49:59 AM

I'm getting Access is denied error NsGpuCNMiner.exe file. Even though i'm running start.bat file on windows powershell with admin privileges

Windwos defender breaking balls most likely.

altsay

sr. member

Activity: 359

Merit: 250

I'm getting Access is denied error NsGpuCNMiner.exe file. Even though i'm running start.bat file on windows powershell with admin privileges

invicta

member

Activity: 194

Merit: 10

Quote from: Call_Me_Bambi on June 12, 2018, 06:15:33 PM

Quote from: altsay on June 12, 2018, 05:00:55 PM

I just build a new rig today, R9 280x and a fresh driver Adrenaline 18.5.2. Now this happens:

Code:

C:\Claymore>NsGpuCNMiner.exe -pow7 1 -xpool ssl://us-east.cryptonight-hub.miningpoolhub.com:20596 -xwal account.worker -xpsw x

╔════════════════════════════════════════════════════════════════╗
║ Claymore's CryptoNote AMD GPU Miner v11.3 ║
╚════════════════════════════════════════════════════════════════╝

XMR: 2 pools are specified
Main Monero pool is us-east.cryptonight-hub.miningpoolhub.com:20596

C:\Claymore>

What might be the reason?

I tested your configuration and it run OK, no problems. Since this is a new build one thing to look out for is Windows Defender deleting 'NsGpuCNMiner.exe', as it usually does, unless added to exeptions.

I've seen that happen before but it wouldn't display all this stuff: "Claymore's CryptoNote AMD GPU Miner v11.3, XMR: 2 pools are specified", you would just get a simple 'file not found' error and the DOS window would just blink and disappear.

Marvell2

full member

Activity: 1148

Merit: 132

can you at least open source this @claymore so somone can add the missing kernels ?

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: Beyerd17 on June 14, 2018, 12:05:57 AM

Quote from: Call_Me_Bambi on June 08, 2018, 08:27:14 PM

Quote from: UnclWish on June 08, 2018, 07:04:26 PM

Stop to attract to SRB miner. It unstable in hash speed as hell! To get max speed for my 580 cards I relaunch it 5-10 times. Rebuilding kernel bins is also different story...
Claymore's miners are stable as rock! Fast starting, stable speed.
Plus SRB miner slower on old 2xx and 3xx cards.
If people didn't like Claymore's miners they didn't use them.

Some people swear by one miner over another with almost religious fervour, I've used lots of different miners and use the one I feel happy with, be it Claymore, SRBminer or whatever, it sometimes comes down to a matter of individual preference, but one will never convince the fanatics - Die Heretic !

It's a matter of personal taste, some prefer the GUI of Claymore and some just don't. Personally I prefer Claymore over the others.

Yes, I too. But I force to use other miners due to Claymore stop support for CN miner.

Claymore! Return back to CN miner!

Beyerd17

full member

Activity: 826

Merit: 103

Quote from: Call_Me_Bambi on June 08, 2018, 08:27:14 PM

Quote from: UnclWish on June 08, 2018, 07:04:26 PM

Stop to attract to SRB miner. It unstable in hash speed as hell! To get max speed for my 580 cards I relaunch it 5-10 times. Rebuilding kernel bins is also different story...
Claymore's miners are stable as rock! Fast starting, stable speed.
Plus SRB miner slower on old 2xx and 3xx cards.
If people didn't like Claymore's miners they didn't use them.

Some people swear by one miner over another with almost religious fervour, I've used lots of different miners and use the one I feel happy with, be it Claymore, SRBminer or whatever, it sometimes comes down to a matter of individual preference, but one will never convince the fanatics - Die Heretic !

It's a matter of personal taste, some prefer the GUI of Claymore and some just don't. Personally I prefer Claymore over the others.

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Hi Claymore - would you consider VEGA basic optimization support for the miner? Thanks

===
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
OpenCL initializing...
AMD Cards available: 2
GPU #0: gfx900 (Radeon RX Vega), 8176 MB available, 56 compute units (pci bus 3:0:0)
GPU #0 recognized as Vega
GPU #1: gfx900 (Radeon RX Vega), 8176 MB available, 56 compute units (pci bus 6:0:0)
GPU #1 recognized as Vega
POOL version
GPU #0 algorithm ASM, -h 3072, -dmem 0 (Memory used: 6297MB)
GPU #0 - NOTE: this miner is not optimized for Vega
GPU #1 algorithm ASM, -h 3072, -dmem 0 (Memory used: 6297MB)
GPU #1 - NOTE: this miner is not optimized for Vega
Total cards: 2
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Monero Pow7 algorithm enabled
XMR: Stratum - connecting to 'xmr-asia1.nanopool.org' <139.99.101.197> port 14444 (unsecure)
Remote management (READ-ONLY MODE) is enabled on port 3333
===

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: altsay on June 12, 2018, 05:00:55 PM

I just build a new rig today, R9 280x and a fresh driver Adrenaline 18.5.2. Now this happens:

Code:

C:\Claymore>NsGpuCNMiner.exe -pow7 1 -xpool ssl://us-east.cryptonight-hub.miningpoolhub.com:20596 -xwal account.worker -xpsw x

╔════════════════════════════════════════════════════════════════╗
║ Claymore's CryptoNote AMD GPU Miner v11.3 ║
╚════════════════════════════════════════════════════════════════╝

XMR: 2 pools are specified
Main Monero pool is us-east.cryptonight-hub.miningpoolhub.com:20596

C:\Claymore>

What might be the reason?

Look, what miner writes in log file.

hieunguyen

newbie

Activity: 20

Merit: 0

Quote from: UnclWish on June 08, 2018, 07:04:26 PM

Stop to attract to SRB miner. It unstable in hash speed as hell! To get max speed for my 580 cards I relaunch it 5-10 times. Rebuilding kernel bins is also different story...
Claymore's miners are stable as rock! Fast starting, stable speed.
Plus SRB miner slower on old 2xx and 3xx cards.
If people didn't like Claymore's miners they didn't use them.

Because it does not cryptonight lite v7 and cryptonight heavy ... and it is not updated anymore

Call_Me_Bambi

sr. member

Activity: 574

Merit: 261

Quote from: altsay on June 12, 2018, 05:00:55 PM

I just build a new rig today, R9 280x and a fresh driver Adrenaline 18.5.2. Now this happens:

Code:

C:\Claymore>NsGpuCNMiner.exe -pow7 1 -xpool ssl://us-east.cryptonight-hub.miningpoolhub.com:20596 -xwal account.worker -xpsw x

╔════════════════════════════════════════════════════════════════╗
║ Claymore's CryptoNote AMD GPU Miner v11.3 ║
╚════════════════════════════════════════════════════════════════╝

XMR: 2 pools are specified
Main Monero pool is us-east.cryptonight-hub.miningpoolhub.com:20596

C:\Claymore>

What might be the reason?

I tested your configuration and it run OK, no problems. Since this is a new build one thing to look out for is Windows Defender deleting 'NsGpuCNMiner.exe', as it usually does, unless added to exeptions.

altsay

sr. member

Activity: 359

Merit: 250

I just build a new rig today, R9 280x and a fresh driver Adrenaline 18.5.2. Now this happens:

Code:

C:\Claymore>NsGpuCNMiner.exe -pow7 1 -xpool ssl://us-east.cryptonight-hub.miningpoolhub.com:20596 -xwal account.worker -xpsw x

╔════════════════════════════════════════════════════════════════╗
║ Claymore's CryptoNote AMD GPU Miner v11.3 ║
╚════════════════════════════════════════════════════════════════╝

XMR: 2 pools are specified
Main Monero pool is us-east.cryptonight-hub.miningpoolhub.com:20596

C:\Claymore>

What might be the reason?

dirtypaws

newbie

Activity: 1

Merit: 0

Hello, may I ask a question which is more script / batch file related. I run Claymore on CPU under winpe, I have alot of hardware from different years and I point them all to a pool, it's common to often be 25KHS, I made it all automated and they boot my script from my winpe image. Now the problem comes in the fact I have different hardware from the last 5 years upto current day Xeons, I want it to be automated and run on the currect number of threads (leaving it to default is not ideal, I like to utilise around 80% only).

Onto my question, in winpe I can pull the level3cache with wmic (wmic cpu get l3cachesize), there a way the output of this command into my claymore switch options? It would be ideal since I could leave all my machines to Pxeboot and run the most optimal thread count (cache /2).

Thank you.

Call_Me_Bambi

sr. member

Activity: 574

Merit: 261

Quote from: notbatman on June 09, 2018, 07:27:51 PM

Set the memory voltage to 875 in the bios mod for rx570 cards if the software is being stubborn.

I rolled-back to Windows 1703 and it made no difference at all. So I'll have a go a burning the voltage into the BIOS, not something I like doing as if it doesn't work it's more work to fix than just changing a number in a line of code.

notbatman

legendary

Activity: 2212

Merit: 1038

Set the memory voltage to 875 in the bios mod for rx570 cards if the software is being stubborn.

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: Call_Me_Bambi on June 09, 2018, 06:21:11 PM

Unable to get -cvddc to work, any help, thanks.

Running Windows 10 Pro (x64) 1803, latest AMD drivers.
Monitoring GPU core voltage with 'HwInfo64'.

I have a small rig with two RX470 (one 4GB and one 8GB, bios modded) and can't get -cvddc to reduce the core voltage, no matter what I set it to it will not go lower than 988mV.
Now if I use MSI Afterburner to reduce the core voltage it works, if I set the core voltage to -25mV (both cards) Hwinfo64 will show the voltage drop from 988mV to 963mV, but Claymore's -cvddc does nothing ?
I've been using AB until now to reduce the core voltage but thought I'd give Claymore's option a try but with no success, I've just updated Windows to 1803 so I'm wondering if this is the problem.
Getting between 880-900 h/s with these cards so I hate to have to roll-back Windows to 1703 in case it all goes horribly wrong.

My Command Line:

Code:

NsGpuCNMiner -xpool ssl://europe.cryptonight-hub.miningpoolhub.com:20580 -xwal user.worker -xpsw x -pow7 1 -ftime 5 -mport 0 -r 1 -h 1024,896 -cvddc 970,970

Why nobody dasn't allowes that HWInfo can read sensors wrong or with bugs due to new AMD driver's specifics?

Call_Me_Bambi

sr. member

Activity: 574

Merit: 261

Unable to get -cvddc to work, any help, thanks.

Running Windows 10 Pro (x64) 1803, latest AMD drivers.
Monitoring GPU core voltage with 'HwInfo64'.

I have a small rig with two RX470 (one 4GB and one 8GB, bios modded) and can't get -cvddc to reduce the core voltage, no matter what I set it to it will not go lower than 988mV.
Now if I use MSI Afterburner to reduce the core voltage it works, if I set the core voltage to -25mV (both cards) Hwinfo64 will show the voltage drop from 988mV to 963mV, but Claymore's -cvddc does nothing ?
I've been using AB until now to reduce the core voltage but thought I'd give Claymore's option a try but with no success, I've just updated Windows to 1803 so I'm wondering if this is the problem.
Getting between 880-900 h/s with these cards so I hate to have to roll-back Windows to 1703 in case it all goes horribly wrong.

My Command Line:

Code:

NsGpuCNMiner -xpool ssl://europe.cryptonight-hub.miningpoolhub.com:20580 -xwal user.worker -xpsw x -pow7 1 -ftime 5 -mport 0 -r 1 -h 1024,896 -cvddc 970,970

dingdongtobias

newbie

Activity: 156

Merit: 0

Quote from: UnclWish on June 08, 2018, 07:04:26 PM

Stop to attract to SRB miner. It unstable in hash speed as hell! To get max speed for my 580 cards I relaunch it 5-10 times. Rebuilding kernel bins is also different story...
Claymore's miners are stable as rock! Fast starting, stable speed.
Plus SRB miner slower on old 2xx and 3xx cards.
If people didn't like Claymore's miners they didn't use them.

sorry to drop in
i have 380, 470, 480, 570, 580 4&8 MB cards and never had to relaunch srb 5-10 times, it always made 1 .srb file for each of cards, i see people say it creates a .srb file on every launch, what version does that?

stability is also good, never got freeze or lockups, i am running it on windows 10 x64 v1703 with blockchain drivers :

https://pasteboard.co/Hp4Y0mS.jpg

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: etsRX on June 09, 2018, 12:01:40 AM

Hello!

Can U mine Cryptonight Heavy w/ this miner?

No. That's why we asking Claymore to update his miner.

Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 14. (Read 2145074 times)